Sync Using Bluetooth - JAMin, XDA Neo, S200 ROM Development

Can anybody explain the procedure to sync via bluetooth? Thank you.

I shall expand on this when I can, if wanted.
First, you will need to set up a com port on your PC (it must be incomming, and be less than COM17).
Then, you need to make active sync use this com port. To do so, select "Connection Settings" in Active Sync and then check the box that says "allow connections through the following" and select the COM port you set up earlier.
Then you need to setup a normal (wired) sync relationship with Active Sync.
Now, turn the bluetooth on on both devices and make sure they are both set to visible.
Then, create a partnership between the two but create it from the PC.
On the PPC, after the partership has been created, there will be an "Advanced" button (the right soft key) press it and select "Active Sync".
Then, in active sync on the PPC, you will need to select "Connect through Bluetooth" and it should sync!
EDIT: I have just made a wiki page about this here.

actually if someone use searh function.
They dont even need new thread.

However, it's now on the wiki which should make it easier to find...

l3v5y said:
However, it's now on the wiki which should make it easier to find...
Click to expand...
Click to collapse
I think you did a good job to add it to WIKI, that's what it is ment to be isn't it? And you did it quite professional too!

rondol1 said:
I think you did a good job to add it to WIKI, that's what it is ment to be isn't it? And you did it quite professional too!
Click to expand...
Click to collapse
Thanks! I think I may go through the prophet wiki and see what I can add/update. Any ideas for something to add?

l3v5y said:
However, it's now on the wiki which should make it easier to find...
Click to expand...
Click to collapse
good job l3v5y
nice one.

l3v5y said:
Thanks! I think I may go through the prophet wiki and see what I can add/update. Any ideas for something to add?
Click to expand...
Click to collapse
The factory manual! Many users run into problems that are in fact misuse of their Prophets!

May God bless you all
Thank you very much to all of you for your great support and help. May the God bless you all with all the Happiness.

Related

Translation of chinese rom

This is for spl 1.2 i did not make any changes other than the language and uc compliant i am going on vacation tomorrow and will be back on monday. I am only posting this so if someone else wants to try then they can. there is a little problem with making a new connection but if use my cingular.xml file on start up then it will work fine as it does for me. there is also something wrong with the phone calls but im not looking into it until i get back. so good luck guys
SPL 1.2
http://www.megaupload.com/?d=BKGOGFXR
SPL 3.5
http://www.megaupload.com/?d=L7T4TXKT
Sorry for throwing so many roms at you guys but i was board at work to day and thought i would give this another try. hope you guys are using my connection/contacts package as this should help with testing all these different roms http://forum.xda-developers.com/showthread.php?t=403458
irus said:
This is for spl 1.2 i did not make any changes other than the language and uc compliant i am going on vacation tomorrow and will be back on monday. I am only posting this so if someone else wants to try then they can. there is a little problem with making a new connection but if use my cingular.xml file on start up then it will work fine as it does for me. there is also something wrong with the phone calls but im not looking into it until i get back. so good luck guys
http://www.megaupload.com/?d=BKGOGFXR
Click to expand...
Click to collapse
ooooooh yes!!
I'll continue ur project for you
I hope that i can solve this problems
michyprima said:
ooooooh yes!!
I'll continue ur project for you
I hope that i can solve this problems
Click to expand...
Click to collapse
Well done IRUS!
Michy, please add an SPL 3.5 release, 60-70% of the forum active users have SPL 3.5
sergiopi said:
Well done IRUS!
Michy, please add an SPL 3.5 release, 60-70% of the forum active users have SPL 3.5
Click to expand...
Click to collapse
Post 1...........
irus said:
Post 1...........
Click to expand...
Click to collapse
irus u are really a genius
tomorrow i'll download the spl1.2, i have only 100mb traffic at days...
So i can work only on 1.2 version. However when irus is there can make spl3.5
Irus i hope i can really help u
michyprima said:
irus u are really a genius
tomorrow i'll download the spl1.2, i have only 100mb traffic at days So i can work only on 1.2 version. However when irus is there can make spl3.5
Irus i hope i can really help u
Click to expand...
Click to collapse
i hope so to. I would much rather make this rom as a community then by myself
Irus and Michy,
Both of you are my heroes. Thank you. I'm aware however of some errors and speed problem of the original chinese version, and am waiting for the "stabilisation version " atm. I'm currently using mutou version 1 which is fast and no serious bug. Good that you have gained the expertise to do the translation, as we can then do it for all future non-english ROM.
Irus, don't worry about so many ROMS. You've given us more choices, that's all. We thank you for these. Keep up the good work!
Irus and Michy,
Can you put back the standard keyboard and remove the chinese SIPs? If we can fix the setting to turn off auto-rotate and have touchflo setting it will be sweet. Also, for some reasons, my Sprite backup does not work. All these were among the problems in the chinese version.
Okay, I tried out the spl1.2 Translated (into English) version of Mutou's ROM.
First, I checkd through the settings and noted the following:
1. In the power setting, there are three tabs with names called "10 sec", "30 sec" and "1min". I think the correct name for them should be "External Battery", "Internal Battery", and "Backlight brightness" or similar wording.
2. TouchFLO setting is all messed up.
3. Soft key setting are still in Chinese. I think we should either remove this, or have it in English.
4. Auto-rotate setting still does not respond.
5. A4 keyboard should be completely removed and replaced by the standard keyboard
6. We should hide extended-ROM2
7. I can't find camera application, However, I am able to start the camera if I use the picture viewer program. The problem, however, is that all the usual camera settings such as choosing the mode, resolution, etc, are not responding to user actions.
8. When I tried to set up my data service provider's setting, I noticed that it only has ability to set up dialed up modem, so I'm unable to test any 3G data connection.
9. SMS services setting gives a blank screen.
10. Although the start menu has a link to phone, phone application does not exist. I can't start a dialer. However, I am able to go to the contact application and make a call, although I'm then unable to end the call since there is no dialer.
11. The Notes application does not start.
12. Camera application started via the picture viewer does not offer the opportunity to use microdrive as storage, although microdrive is functioning properly.
13. Window Media Player does not produce any sound.
14. After using the device for a while, the device stop producing sound although Sound Setting has checked the bottom two entries.
At this point, I installed my wktask and FtouchSL.
Then, all applications stop working, wherease the file explorer was working before this. Contact applicaion no longer could start. Calender could not start, and shows an error saying "No program memory availalble. Tap Start>Settings>system tab>memory , stop programs that did not automatically stop, and try again". Actually no program is running yet. I then uninstalled both wktask and Ftouchsl. The ROM does not seem to allow it to be successfully removed.
At this point, I could not proceed any further.
Good try though, at least most of the text are in English now. Looking forward to the second attempt.
eaglesteve said:
Okay, I tried out the spl1.2 Translated (into English) version of Mutou's ROM.
First, I checkd through the settings and noted the following:
1. In the power setting, there are three tabs with names called "10 sec", "30 sec" and "1min". I think the correct name for them should be "External Battery", "Internal Battery", and "Backlight brightness" or similar wording.
2. TouchFLO setting is all messed up.
3. Soft key setting are still in Chinese. I think we should either remove this, or have it in English.
4. Auto-rotate setting still does not respond.
5. A4 keyboard should be completely removed and replaced by the standard keyboard
6. We should hide extended-ROM2
7. I can't find camera application, However, I am able to start the camera if I use the picture viewer program. The problem, however, is that all the usual camera settings such as choosing the mode, resolution, etc, are not responding to user actions.
8. When I tried to set up my data service provider's setting, I noticed that it only has ability to set up dialed up modem, so I'm unable to test any 3G data connection.
9. SMS services setting gives a blank screen.
10. Although the start menu has a link to phone, phone application does not exist. I can't start a dialer. However, I am able to go to the contact application and make a call, although I'm then unable to end the call since there is no dialer.
11. The Notes application does not start.
12. Camera application started via the picture viewer does not offer the opportunity to use microdrive as storage, although microdrive is functioning properly.
13. Window Media Player does not produce any sound.
14. After using the device for a while, the device stop producing sound although Sound Setting has checked the bottom two entries.
At this point, I installed my wktask and FtouchSL.
Then, all applications stop working, wherease the file explorer was working before this. Contact applicaion no longer could start. Calender could not start, and shows an error saying "No program memory availalble. Tap Start>Settings>system tab>memory , stop programs that did not automatically stop, and try again". Actually no program is running yet. I then uninstalled both wktask and Ftouchsl. The ROM does not seem to allow it to be successfully removed.
At this point, I could not proceed any further.
Good try though, at least most of the text are in English now. Looking forward to the second attempt.
Click to expand...
Click to collapse
most of this problem are there because irus have used incompatible muis. So i'm trying to solve all this problems, but it isnt simple
michyprima said:
most of this problem are there because irus have used incompatible muis. So i'm trying to solve all this problems, but it isnt simple
Click to expand...
Click to collapse
Hullo Michy,
If you managed to solve these issues, would you avail it for both spl's..1.2 & 3.5
Cheers
for now, i have fixed smsservice and backlight issue + standard virtual keyboard input.
You can solve this on your ppc with overwriting file in attached zip in /windows folder and import the keyboard.reg registry file.
Then reboot...
I cant fix more for now...
have a problem
i can not run the Phone in the Programs menu.
michyprima said:
for now, i have fixed smsservice and backlight issue + standard virtual keyboard input.
You can solve this on your ppc with overwriting file in attached zip in /windows folder and import the keyboard.reg registry file.
Then reboot...
I cant fix more for now...
Click to expand...
Click to collapse
nice job on the fix.... i am sending you a pm
at the moment this project is dead. if you want a good rom go here, its a good one by sogarth http://forum.xda-developers.com/showthread.php?t=406348
irus said:
at the moment this project is dead. if you want a good rom go here, its a good one by sogarth http://forum.xda-developers.com/showthread.php?t=406348
Click to expand...
Click to collapse
There is'nt a need to pursue this further, because the purpose of the translation is to get something like what is shown in your link. Thank for the effort.
Sergiopi, I recommend that the translated ROM link in your ROM list thread be removed because they are still very half baked.

To Rose OWNERS ! not a rom dump holder. but a owner.

If i can get a full reg dump. only the reg from HKLM..
there are missing entries in the rom I have and it will be easier for me to go though a full .reg dump then all of the rgus in a rom dump.
Hard Reset might help u?
sumitescp said:
Hard Reset might help u?
Click to expand...
Click to collapse
i have a different device. so the rom was ported before the rose was even released.
so a hard reset will only install the reg with missing entries. if i get a .reg dump of hklm i can find my missing reg entries and get all of the 740 functions on my juno
shadowmike said:
i have a different device. so the rom was ported before the rose was even released.
so a hard reset will only install the reg with missing entries. if i get a .reg dump of hklm i can find my missing reg entries and get all of the 740 functions on my juno
Click to expand...
Click to collapse
740 functions on junO? is the hardware same?
@shadowmike
I own S740. If you provide step-by-step instructions on how to perform that dump, I would post those files.
omikr0n said:
@shadowmike
I own S740. If you provide step-by-step instructions on how to perform that dump, I would post those files.
Click to expand...
Click to collapse
Thank you,
Basicly all you need is a reg editor for windows mobile, which can be found here http://ceregeditor.mdsoft.pl/ if you don't already have one.
connect your phone to your computer using active sync.
open ce reg editor and connect to your phone.
the reg keys will be displayed in the left pane.
click HKEY_LOCAL_MACHINE, then EDIT > EXPORT, save the file
then zip the file and upload here thankyou for your help.
sumitescp said:
740 functions on junO? is the hardware same?
Click to expand...
Click to collapse
No not at all. I should have made my comment earlier more clear.
I want to get the OS functions on my phone. As the rom ported has alot of stuff removed. Like audiomanager homescreen plugin, htc email homescreen plugin, etc, etc. but we do have everything else from your phone on ours. like phonecanvas 2g.. thankyou
but obviously features like GPS and other hardware features that arnt on the OMAP850 will not work. But like i said, we have your rom on our device so put yours and mine next to eachother your just going to see a diffrent case
Here it is. I removed certain parts with personal information (I hope I haven't forgotten any).
omikr0n said:
Here it is. I removed certain parts with personal information (I hope I haven't forgotten any).
Click to expand...
Click to collapse
Cool thank you. and dont worry about info. I have to much of a reputation at allshadow.com as the number 1 user and moderator to try and mess with somones personal info like a criminal.
like i said all i want to do is get all the homescreen plugins working correctly .. thankyou for your help. if you need anything just ask. you can run manila 2d on your phone. you can check my instructions in the juno section or over at allshadow.com
edit... nvm im dumb i wasnt thinking this was going to be a dump of a used phone. i should have....
but i now realize what you ment by removing personal info. I can use this. and none of your info was in my way thank you again.
Question. for you guys. does the htc favorites homescreen plugin update automaticly or are they preset ?
@shadowmike
As far as I'm concerned the HTC Favorites plugin is a live display of the IE favorites. But I am not entirely certain about that since I don't have a S740.
shadowmike said:
Question. for you guys. does the htc favorites homescreen plugin update automaticly or are they preset ?
Click to expand...
Click to collapse
I don't use it and have it disabled on my (altered) sliding panels home screen, but I have just tried it and it seems to update automatically.
It has a bug, however. When I bookmarked new site, it was added to the panel, but panel page with that site lacked headline "Internet explorer", IE icon and right soft key functionality.
omikr0n said:
I don't use it and have it disabled on my (altered) sliding panels home screen, but I have just tried it and it seems to update automatically.
It has a bug, however. When I bookmarked new site, it was added to the panel, but panel page with that site lacked headline "Internet explorer", IE icon and right soft key functionality.
Click to expand...
Click to collapse
hmm thnks for the info. ill have to look into the reg alittle mor closely and see how it has everything updated automaticly.

Screensaver

Hi again.
Does anybody have an idea about a screensaver for the Rose? Something, where I could see the time and the missed sms, emails and calls? Something, like always the Nokia phones have.
Thanks for the answers!
On my old WM5 Smartphone I used and really liked maniac's Automatic Keylock but on the S740 I couldn't get it to update the email count. Also the device lock didn't behave as I'm used to.
Give it a try, maybe it fits your needs or you can figure out how to fix the issues that I experience...
Calvin. said:
On my old WM5 Smartphone I used and really liked maniac's Automatic Keylock but on the S740 I couldn't get it to update the email count. Also the device lock didn't behave as I'm used to.
Give it a try, maybe it fits your needs or you can figure out how to fix the issues that I experience...
Click to expand...
Click to collapse
Thanks for the tip, but I was not able to configure the programm that it will run on my Rose I dont think its for WM 6.1 devices and thats the problem. Hope, somebody will make program like this in the near future. I am ready to pay for it, dont need freeware I need it very much.
Regards Robert
4omega said:
Thanks for the tip, but I was not able to configure the programm that it will run on my Rose I dont think its for WM 6.1 devices and thats the problem. Hope, somebody will make program like this in the near future. I am ready to pay for it, dont need freeware I need it very much.
Regards Robert
Click to expand...
Click to collapse
I am sorry, I was wrong. The Automatic Keylock screensaver runs very well on the Rose, it is only a matter of the right configuration of the programm. It is simple and work great incl email, sms etc. notification.
If somebody would like to use it on the Rose and would have problems with the setting, dont hesitate to contact me.
Do you use device lock or key lock?
Calvin. said:
Do you use device lock or key lock?
Click to expand...
Click to collapse
Hi. I dont use nothing of them. I use just the Supress Key presses option in the screensaver. But the Keylock runs well too, I tried it, but dont like to press two keys to unlock the phone

Cab Makers???

Can anyone please make this into cab format for my tilt2? I have this over in that sub-forum but no one is responding, it doesn't get visited half as much as over here. Its the best mod i've found to fully increase all speakers even bluetooth on the rhodium/tilt2 device! I have tested and used many but this set of reg edits works the best and loudest while still keeping the quality crystal clear! Can anyone please make these edits into a simple cab install please? Thank you.
You know what funny is?
There is 351,464 threads, 4,637,131 posts, and 2,093,612 members here.
What do we see is GIGANTIC cash flow in that business(and HTC as PDA killer, etc, etc).
And noone made freeware CABMaker so far here.
All i wanted to say...this place lost all its character, it is just another phone forum now, practically.
Name it.
Cheerz,
nothin.
upd: you do not need cabs for this, imo, just make regs from these and use tc or taskmanager 3.x to import reg you need...until someone will make...cabs, or goddamn cabmaker.
upd2: before someone will ask: why i wont make cab for deeznuts instead of writing this:
i wont use stolen wincecabmanager, you do it, guys...
pupakota said:
You know what funny is?
There is 351,464 threads, 4,637,131 posts, and 2,093,612 members here.
What do we see is GIGANTIC cash flow in that business(and HTC as PDA killer, etc, etc).
And noone made freeware CABMaker so far here.
All i wanted to say...this place lost all its character, it is just another phone forum now, practically.
Name it.
Cheerz,
nothin.
upd: you do not need cabs for this, imo, just make regs from these and use tc or taskmanager 3.x to import reg you need...until someone will make...cabs, or goddamn cabmaker.
Click to expand...
Click to collapse
thanks for your help, much appreciated
deeznuts said:
Can anyone please make this into cab format for my tilt2? I have this over in that sub-forum but no one is responding, it doesn't get visited half as much as over here. Its the best mod i've found to fully increase all speakers even bluetooth on the rhodium/tilt2 device! I have tested and used many but this set of reg edits works the best and loudest while still keeping the quality crystal clear! Can anyone please make these edits into a simple cab install please? Thank you.
Click to expand...
Click to collapse
This sounds like SPAM, but check out the excellent CE RegEditor -- it is a nice remote reg editor that lets you view/edit/import/export your phone's registry from your PC, AND it lets you convert REG files to CAB files. It should do the trick for you.
http://ceregeditor.mdsoft.pl/
jsmith8858 said:
This sounds like SPAM, but check out the excellent CE RegEditor -- it is a nice remote reg editor that lets you view/edit/import/export your phone's registry from your PC, AND it lets you convert REG files to CAB files. It should do the trick for you.
http://ceregeditor.mdsoft.pl/
Click to expand...
Click to collapse
i can agree, ceregedit is a-must-have tool.
idd, reg to cab is available in that soft, interesting discovery, i forgot about that, sorry...
until it is just reg, it will do the job.
here yah go. not sure what to do with the .csv file...
mtstmp said:
here yah go. not sure what to do with the .csv file...
Click to expand...
Click to collapse
Which one is the .csv? Lol, sorry, dont know a thing about this stuff. I just copy the audiopara3 file in windows, overwrite, then import the other 3-4 reg files using the app posted above via my pc through usb. Just looking for a cab to do all this for less hassle of course. Appreciate your help here in making the cab. Where you able to get it all in there?
deeznuts said:
Can anyone please make this into cab format for my tilt2? I have this over in that sub-forum but no one is responding, it doesn't get visited half as much as over here. Its the best mod i've found to fully increase all speakers even bluetooth on the rhodium/tilt2 device! I have tested and used many but this set of reg edits works the best and loudest while still keeping the quality crystal clear! Can anyone please make these edits into a simple cab install please? Thank you.
Click to expand...
Click to collapse
Hey here you Go

How to set proxy setting for wifi?

hello every one
first thank you for viewing this thread
can any one tell me how to set proxy settings WORKING with HTC HD2
i already tried below methods but non working at alln and i am only able to browse the Local Network (Interanet) but no access to the internet.
1. set Network card to connect to work and edit My work connection Proxy settings.
2. using ProxyOn.cab file and editing the registry key of proxy setting
i've tried all of these with and without Hard reset Soft Reset
i am able to brows the internet when i connect my phone to a PC through Sync and set the Proxy and IP Manually
i am sure that DHCP is working fine with my phone becuase i can go through local network
as i asked HTC support they told me :
You can only set up proxy server for wifi via 3rd party application Unfortunately we are unable to help with your query as we don not support third party applications. Please refer to the software vendor for further assistance. As far as we know this application may not be compatible. We hope that you will find further assistance with the software developer. I trust that this resolves your query, please do not hesitate to contact us again if required. Thank you for contacting HTC. Kind Regards Harika K. HTC
Please i really need your Help
I FOUND THE SOLUTION
HEEYY EVERY BODY
set proxy for opera:
type in URL opera:config
!!!!!!!!!!!!
then go and set what ever you want
as easy as this!!
it dose not work on my phone
hi ,
i use opera mini 5,
i try opera:config , but it does not give to change proxy.
thanks
What about using an ordinary opera browser? not possible?
you are right there is no proxy in config tab in mini or any where else
if you have visited this thread you may have using an HTC and any htc device may be able to use opera mobile.
Thanks a mil
THANK YOU! The experts in my university's computing and network services said nothing could be done! The registry tweak didn't work! No instant reply from HTC, and yet the solution is as simple as opera:config!
but as you may know ONLY opera web browser is connected to internet.
and the apps like NimBuzz, weather and etc are still unable to connect.
so its better than having nothing
can i ask u where are you from?!
Beirut. And you're right, the settings only apply locally to opera, but its better than nothing. Let's hope they fix it in the near future...
Hi if you want to use proxy for your WiFi one important thing is to setup the connection to connect to Work, not to Internet.
Go to Start->Settings Connections tab, tap Wi-Fi, tap Wireless Networks. Select the network you'd like to connect to (or add new one) and on the first screen you'll see a dropdown named Connects to. Here you have to set it to Work, NOT TO Internet. Apply the settings (if you're adding a new connection, insert all the other data too).
Next go to Start->Settings Connectins tab and tap Connections. Go to tab Advanced and tap Select Networks button. From the first dropdown select My Work Network (if it isn't there create it and name it so). Edit this setting (tap button Edit). Open the tab Proxy Settings. Check both checkboxes and tap on Advanced button. Here you'll have to specify your proxy addresses and ports. For me to get it to work I had to specify HTTP and Socks.
Set this up and apply all settings you have done so far.
Go to Start->Settings Connections tab and tap connections. Go to tab Advanced and tap Select networks button. Now select My Work Network also in the second drop down and apply the changes.
I hope it'll work for you. The whole thing depends on the type of proxy you have and what kind of authentication it uses.
I've tested it on HTC Touch HD (Windows Mobile 6.1) and on Ipaq 114 (Windows Mobile 6.0).
*edit*
I've also successfully tested it on HTC Touch HD2 (Windows Mobile 6.5) and Sony Ericsson Xperia (Windos Mobile 6.1).
zwar said:
Hi if you want to use proxy for your WiFi one important thing is to setup the connection to connect to Work, not to Internet.
Go to Start->Settings Connections tab, tap Wi-Fi, tap Wireless Networks. Select the network you'd like to connect to (or add new one) and on the first screen you'll see a dropdown named Connects to. Here you have to set it to Work, NOT TO Internet. Apply the settings (if you're adding a new connection, insert all the other data too).
Next go to Start->Settings Connectins tab and tap Connections. Go to tab Advanced and tap Select Networks button. From the first dropdown select My Work Network (if it isn't there create it and name it so). Edit this setting (tap button Edit). Open the tab Proxy Settings. Check both checkboxes and tap on Advanced button. Here you'll have to specify your proxy addresses and ports. For me to get it to work I had to specify HTTP and Socks.
Set this up and apply all settings you have done so far.
Go to Start->Settings Connections tab and tap connections. Go to tab Advanced and tap Select networks button. Now select My Work Network also in the second drop down and apply the changes.
I hope it'll work for you. The whole thing depends on the type of proxy you have and what kind of authentication it uses.
I've tested it on HTC Touch HD (Windows Mobile 6.1) and on Ipaq 114 (Windows Mobile 6.0).
Click to expand...
Click to collapse
First of all take a look at the thread date and others and then post!
as i see you have not tested on WinMo 6.5 ! and it was your firs post here so!! try not to make others laugh to you!
Hi navidnouri. I must confess replys like yours really entertain me Bragging about others, what a MAN! But let get thing's straight, right?
First of all take a look at the thread date and others and then post!
Click to expand...
Click to collapse
You obviously do not have an idea what's the real purpose of a forum or a knowledge base.
as i see you have not tested on WinMo 6.5
Click to expand...
Click to collapse
I see. An expert as yourself would have severe difficulcy trying it on WM6.5. I understand those completely rewritten and changed OSs, how can anybody get them....??
and it was your firs post here so!! try not to make others laugh to you!
Click to expand...
Click to collapse
That's the most hillarious part You should go for a stand up comedian man!!! 44 posts, huh!! Wow!!! In less than a year! You are true hero ->
Let me just ask you something: you fly here in May 2010, crying (see the icon of the thread) for help about proxy on your phone and TWO WEEKS later you figured it out by yourself using a simple solution opera:config! You must be a genious man. How did you find a complex solution like that in just two weeks?? Seriously I expect an answer!! You should apply for the next american idol as the most talented phone user ever.
Let me ask you another question though. On 9th October 2010 you posted this hillarious line:
but as you may know ONLY opera web browser is connected to internet.
Click to expand...
Click to collapse
Did you know opera:config applies only to opera right away or did it took you additional (appoximately) 4 MONTHS to figure it out?
Oh,oh,oh,oh, there's another thing!!!!! Please be so grateful and answer it for me, please. You were saying
First of all take a look at the thread date and others and then post!
Click to expand...
Click to collapse
You posted the fifth post here in july, 3 months later there's a post honouring you, of course who would yell at anybody honouring him, even if it's an outdated post. And then, look at this, here I come, 3 months after your last post and you're saying the words above.... Do you see any analogy? A pattern?
You really made my day!! Thumbs up!!
*edit*: I've decided to give you my thanks for that. Can't stop laughing .... seriously.
Hey navidnouri, since you've been so great so far, I'm most certain your reply will be as hillarious as the previous one, so count on another thanks by me!
I've no words, it's one year that i was searching for a solution in order to set my university proxy!!
Thanks!!
zwar said:
Hey navidnouri, since you've been so great so far, I'm most certain your reply will be as hillarious as the previous one, so count on another thanks by me!
Click to expand...
Click to collapse
i know i know!
this is not your first ass leaking!
so KISS MY ASS MORE!
it's amazing you put toooooooooooo much IQ on processing these aaaall data !!
go and register your name for the fastest ever HPCC of the world!
You're even better than I hoped you'll be.... A guy familliar with concepts as can be seen....
As I promised, I'm giving you my thanks, this amusing words of yours must go directly to your resume. I'm happy to made you proud of yourself and proud in front of all your friends.
You know there's a quote I thought about when reading your prose, must have heard it or read it somewhere: "that's the spirit!"
go and register your name for the fastest ever HPCC of the world!
Click to expand...
Click to collapse
I give you right. Maybe I should try. But you know what... following a thread is a question of motivation, as you may allready know. There has to be something attaching to it, if you know what I'm saying.... And now, now, here you come, hillarious, funny, intelligent, who wouldn't want more?
Since you're so generous on advice, here's a thought: A man of your character has most certainly heard of a german comedian Stefan Raab. The thing is, he wrote songs out of quality quotes. So I thought you write a little something out of your last two posts here and publish it on YouTube. Put a little music to it, etc. You know how it goes, right? I'm telling you, you are the material of success. And with such great gadget you own, you could do it directly with your phone and then afterwards even post a tutorial about it here on xda!
Last but not least, there's a slight dissapointment navidnouri... navidnouri, navidnouri, navidnouri..... I put so much hope in you and you didn't answer my questions. Common, be a MAN, show guts, do it. Don't let xda down, it wouldn't be fair.... You don't have to write much, just direct answers, few words, the spelling doesn't matter, grammatic even less, so there shouldn't be anything in your way.... And you know what, I'll give you my thanks (again!), you won't even have to say a curse word or an technical advice. Think about how great this will look on your resume!! Everyone will be able to see how many thanks you've collected and how! And if you'll play along, this thread has a potential to be one of the most viewed on the forum, think about it! You'll be a star! So, enugh of the pep talk, answer the questions navidnouri, for the community's sake!
*edit*: About answering the questions navidnouri... I know some things are just too personal to be publicly accessible, everyone understands that. So if you feel that way about a question, just refer to this edit and skip it.
zwar said:
You're even better than I hoped you'll be.... A guy familliar with concepts as can be seen....
As I promised, I'm giving you my thanks, this amusing words of yours must go directly to your resume. I'm happy to made you proud of yourself and proud in front of all your friends.
You know there's a quote I thought about when reading your prose, must have heard it or read it somewhere: "that's the spirit!"
I give you right. Maybe I should try. But you know what... following a thread is a question of motivation, as you may allready know. There has to be something attaching to it, if you know what I'm saying.... And now, now, here you come, hillarious, funny, intelligent, who wouldn't want more?
Since you're so generous on advice, here's a thought: A man of your character has most certainly heard of a german comedian Stefan Raab. The thing is, he wrote songs out of quality quotes. So I thought you write a little something out of your last two posts here and publish it on YouTube. Put a little music to it, etc. You know how it goes, right? I'm telling you, you are the material of success. And with such great gadget you own, you could do it directly with your phone and then afterwards even post a tutorial about it here on xda!
Last but not least, there's a slight dissapointment navidnouri... navidnouri, navidnouri, navidnouri..... I put so much hope in you and you didn't answer my questions. Common, be a MAN, show guts, do it. Don't let xda down, it wouldn't be fair.... You don't have to write much, just direct answers, few words, the spelling doesn't matter, grammatic even less, so there shouldn't be anything in your way.... And you know what, I'll give you my thanks (again!), you won't even have to say a curse word or an technical advice. Think about how great this will look on your resume!! Everyone will be able to see how many thanks you've collected and how! And if you'll play along, this thread has a potential to be one of the most viewed on the forum, think about it! You'll be a star! So, enugh of the pep talk, answer the questions navidnouri, for the community's sake!
*edit*: About answering the questions navidnouri... I know some things are just too personal to be publicly accessible, everyone understands that. So if you feel that way about a question, just refer to this edit and skip it.
Click to expand...
Click to collapse
you can continue your way! you may come out from a raw user of computer which is surfing the web in every minute of the life looking for someone to laugh at and pass the day. you are so selfish and i have to say that i know i'm not the only one which is ****ting in your mouth!
there are too many social sites like facebook which you can go through and feel more your emptiness.
BTW is it good to have 4 posts like what you said in this thread all in about 2 years. let me ask you sth. was the copy paste function too much heavy for our super computer HPCC in its first post!? tooooooooooo much i guess
i am so sorry to inform you that i had unsubscribed from this thread and i'm not answering to any more **** of yours!
( don't be sad of my friends NONE of them are in xda )
EDIT: you know, i have reached orgasm so do not continue your ass leaking any more
navidnouri that's the spirit! Keep it on!!
I'm stunned! Your languange and argumentation have improved so much I'd bet it wasn't you typing navidnouri, did you asked for help? ;P
Maybe you're right, maybe I'm too selfish, so this time I'll let you do the talking:
You say:
First of all take a look at the thread date and others and then post!
as i see you have not tested on WinMo 6.5 ! and it was your firs post here so!! try not to make others laugh to you!
Click to expand...
Click to collapse
You answer:
you can continue your way! you may come out from a raw user of computer which is surfing the web in every minute of the life looking for someone to laugh at and pass the day. you are so selfish and i have to say that i know i'm not the only one which is ****ting in your mouth!
there are too many social sites like facebook which you can go through and feel more your emptiness.
Click to expand...
Click to collapse
Funny, hah?? Any contradiction somewhere?
i am so sorry to inform you that i had unsubscribed from this thread and i'm not answering to any more **** of yours!
Click to expand...
Click to collapse
Don't feel sorry that's why I'm giving you my thanks this time! As next step you could consider your future on the forum in general ....
( don't be sad of my friends NONE of them are in xda )
Click to expand...
Click to collapse
Sorry to hear you have NO friends. But hey, it's not too late, maybe you learn some good manners and others will start to like you.....
Just as a reminder (see I don't belive you won't check on this thread again, it's too appealing, isn't it?) the questions I've asked you, still no answer ...
*edit:*
EDIT: you know, i have reached orgasm so do not continue your ass leaking any more
Click to expand...
Click to collapse
ROTFL, read this sentence once again and think about it for a bit, would you? I'm sorry I can't give you another thanks for that.... You're a funny guy navidnouri, a funny guy!
zwar tryed to help,...
thx to zwar
your post help me to figure out how to configure the proxy at my HD2!
Before I had no idea where to find the "proxy configuration".
@navidnouri
just shut up man - and stop writhing things nobody helps
GreeT`s Erich
hey guys m unable to use wifi in my college though any app but it works on stock browser and in opera mobile..
i hv galaxy 3 wid 2.2 froyo
any solution ????
how to enable every app to go though proxy like stock browser ???

Categories

Resources