I am having issued with AP4, it will play a ringtone fine and then 2 minutes later it says it is corrupted, i reset the device and the try gain and the ringtone works fine.. the ringtone issue resetting to the default is annoying especially when no ringtone plays at all. sometimes it plays and sometimes it doesnt. when it doesnt and i try to change it it says ringtone corrupt.. do you think its some kind of audio codec or what?
any fix for this yet.. pawell please?? i am missing many many calls.
I am having the exact same problem. I have noticed in AP4 and AP5 beta. I haven't figured out yet what is causing. Have you had any luck?
McP
Soft reset not required
When the phone's ring tone isn't working, if I go into the Phone and then choose options or go to Settings and choose Phone, and try to play the ring tone the "This ring tone file is corrupted or unavailable." error appears. A soft reset does fix this, until it gets screwed up again.
If I go to Settings and choose Notifications then click play on the ring tone it plays. If I go back to the phone settings it plays there too.
Problem still exists - why does this happen - but at least a soft reset isn't needed.
McP
One incoming call - then it stops working
Been doing some more testing. One incoming call seems to put you into the "corrupt" state.
If you disable the phone skin with RealVGA the problem seems to go away. So, is it the manila dialer that's causing the problem? I've got AP4 with the Manila Dialer installed. Disabling it - with RealVGA - seems to make the ring tone problem go away.
McP
mcpell said:
Been doing some more testing. One incoming call seems to put you into the "corrupt" state.
If you disable the phone skin with RealVGA the problem seems to go away. So, is it the manila dialer that's causing the problem? I've got AP4 with the Manila Dialer installed. Disabling it - with RealVGA - seems to make the ring tone problem go away.
McP
Click to expand...
Click to collapse
I thought it was the manilla dialer as well, but I've been having the same thing on the normal skin.
Try using schaps advanced config to disable the phone dialer. It worked for me
I've been using AP4 w/RealVGA and have never had this problem. However, my wife encountered a similar problem with her Tilt, after trying out Ringo and then letting the trial period expire. Uninstalling Ringo solved the problem.
Have any of you installed any ring-management software?
techntrek said:
I've been using AP4 w/RealVGA and have never had this problem. However, my wife encountered a similar problem with her Tilt, after trying out Ringo and then letting the trial period expire. Uninstalling Ringo solved the problem.
Have any of you installed any ring-management software?
Click to expand...
Click to collapse
nope I have been contemplating installing my copy of photo contacts pro though to see if it makes any difference.
Related
after i did all the updates. (dcd new rom , 3.27 radio, gps finder, tomtom, vista phone dialer and the htc home plugin) i have trouble making a call.
It will just stay in the dialing screen and bam! call ended......its doing this so opften that i just spent a half hour tring to make a call..........no luck.......
i usually have 3 bars but sometimes 2 but that was always good enought before.
I've had this problem a few times as well.. even more often, I make a call and it calls out, but I have no audio (I can't hear them, they can't hear me). A soft-reset always fixes both these problems.
taxilian said:
I've had this problem a few times as well.. even more often, I make a call and it calls out, but I have no audio (I can't hear them, they can't hear me). A soft-reset always fixes both these problems.
Click to expand...
Click to collapse
thats not my prob.....my prob is the call wont get connected period it says dialing then goes straight to call ended.
have you tried a soft reset? that fixes it for me.
sure would be nice to find out what causes it, though.
(I meant that I have both the problem you mention as well as the other variation, each in its turn)
you need your msid number
authenticsketch said:
you need your msid number
Click to expand...
Click to collapse
nope i dont
OK so I got excited and updated to the new VZW rom. Everything runs OK except MSVC wont read any notifications. Also I don't get any sound that I just got a sms. All my sounds for everything else works fine, I have checked the sound settings under settings and also under MSVC messaging. Nothing works, just all silent.
Phone rings OK and I get the MSVC announcement.
I unchecked 'announce only high priority' and 'only during free time' too
Any suggestions?
Well i've tried installing both on main mem. and storage card and both have same results. Basically whenever someone calls my stock Caller ID shows up first with the contact, but then S2U2 pops up with Unknown Caller, yes I want to use S2U2 caller ID rather than stock, but I was just wondering if anyone has had this happen to them and if there is a fix. thanks
I'm running Mighty Rom 4.12
i am having the same problem on KevanK's 1.8 rom as well. Just for the record his rom has the black S2A dialer in it which interferes with s2u2 at times.
Same thing here
It doesn't do it all the time but it does a lot of the time. My rom has the black S2A dailer and it never did that with previous versions. Does A_C know yet??
anyone help? ):
Having the same problem. When I test it out, the Caller ID works fine. But if the phone sits for a period of time and I get a call, it rings and vibrates but all I see is my S2U2 unlock screen with no caller ID or notification.
I have the same problem and i'm using the stock rom
I just cannot reccommend against S2U2 enough. I had it on my phone for months and man the amount of calls I would miss, or people would tell me my phone rang for like 30 seconds before I answer and my TP ran for like 5. I would WHOLEHEARTEDLY reccomend Hold End Key for Lock and the Blackstone Slider for CDMA instead.
I do REALLY miss that blazin' full screen Caller ID though.
I love Steve's AOKP PUB Rom but I seem to have one really irritating issue upon using it. I set my ringtone and notification sounds to the ones i always use. Pyxis for Ringtone, and Don't Panic for notifications. Then i noticed that i was not hearing the sounds during incoming phone calls and texts. So i go into the sound setting to see whats up and they both have unrecognized sounds listed. When i try to re-establish the original setting all the choices are gone except for 2 or 3 instead of the usual several dozen. If i use Root Explorer to go into the media folder all the ogg files are still present. Sometimes they come back upon a reboot. Sometimes they dont. Anyone else seen this or know whats happening? Thanks.
jslatas said:
I love Steve's AOKP PUB Rom but I seem to have one really irritating issue upon using it. I set my ringtone and notification sounds to the ones i always use. Pyxis for Ringtone, and Don't Panic for notifications. Then i noticed that i was not hearing the sounds during incoming phone calls and texts. So i go into the sound setting to see whats up and they both have unrecognized sounds listed. When i try to re-establish the original setting all the choices are gone except for 2 or 3 instead of the usual several dozen. If i use Root Explorer to go into the media folder all the ogg files are still present. Sometimes they come back upon a reboot. Sometimes they dont. Anyone else seen this or know whats happening? Thanks.
Click to expand...
Click to collapse
Same here. I'm back of AOKPBRAVO at the moment because of the sound issues. One thing that helped me a bit was to disable vibrate with ring and have ring only but it still would lose the ringtone and on calls the screen would light up and i had missed calls because the ringtone wouldn't be recognized.
I have noticed this same issue and believe I have found a work around for the problem. First take off the Vibrate on incoming calls. Then in the root of your sdcard there is a ringtones folder. Make sure that the ringtone is in that folder. With some of these new roms, they will only play ringtones that are in that folder plus the default that the developer chooses. Go into contacts and set the ringtone for the contact. First I would do it as a test ringtone on a number you can call from. If you have the same ringtone for multiple people then you have to make a new copy of that file. It will only play it for the last contact you assign it too. That is how I cleared my troubles with it. Hope this works out for you.
I used to have the same issue and decided to reflash my ROM and reinstall apps one by one and my phone stopped having this issue but now is back. The issue is that whenever my screen is off and I receive a call my phone rings for a second and then it stops, when I go check who called there's no notification or log about the call. Anybody having this issue. I know it must be a app issue but have no idea which app.
The only app I have installed that could mess with it is GravityBox but I looked trough all the settings, disabled it and uninstalled it and it still does the same problem. But I am pretty sure it has something to do with it.
I also looked into the Call Forwarding option and disabled it but it still does he same thing. This is driving me nuts. I can only receive calls or see whos calling by having my screen on!