I have a wallaby but it dont work .If have in the display yhe boatloader.Can some whone help me to make it work white windows.My engles is not so good sorry
try reading this
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Rudegar said:
try reading this
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Click to expand...
Click to collapse
i try this but doesnt work???
mathieuvanstroe said:
i try this but doesnt work???
Click to expand...
Click to collapse
Is there a other to put windows on a card??
mathieuvanstroe said:
Is there a other to put windows on a card??
Click to expand...
Click to collapse
here is where i get windows http://www.romkitchen.de/
it always worked for me when i had a wallaby
mind you use a sdcard reader and use the tool to put the rom on it
and enter the bootloader it should auto start to flash your device
mind you after the tool put the rom on the sdcard you can verifi that you did it correctly
by the pc not being able to read the card anymore
also make sure that you have a wallaby because in some places the wizard was also called mda
Rudegar said:
it always worked for me when i had a wallaby
mind you use a sdcard reader and use the tool to put the rom on it
and enter the bootloader it should auto start to flash your device
mind you after the tool put the rom on the sdcard you can verifi that you did it correctly
by the pc not being able to read the card anymore
also make sure that you have a wallaby because in some places the wizard was also called mda
Click to expand...
Click to collapse
Ihave now usb flash mode
connect usb cable now but it dont sync ???
I have a wallaby
as stated in the thread i linked to you
take a sdcard reader and a sdcard
do what the link tells you flash the card with the rom
then you put the sd card in your pda and enter bootloader mode
Related
Hi,
I have broken the connector usb of XDA II, I can use something in order to modernize the rom?
Tanks
I dont think so , because in order to install a new Rom the device needs to be restarted and it puts itself in the Bootloader menu so it communicates only throught USB , hard Luck :evil:
What about SD cards..
I believe that you can use a SD card to upload a ROM image to the device..
Bonzo said:
What about SD cards..
I believe that you can use a SD card to upload a ROM image to the device..
Click to expand...
Click to collapse
Hi
Some reference (link-forum) to this procedure.
Tanks
Hi,
I would very high appreciate if someone in this community could help me with the Hard-SPL upgrade problem. I read a lot of threads in this forum and in other forums. I tried to follow several solutions but I get stuck all time during the upgrade to hard spl 2.10 with an error 260.
I connected my mobile via USB cable. WMGC 6.1 is running on my PC --> synchronizing has finished. Then I started Ruuwraper on my vista PC --> after I answered yes to upgrade to hard-spl 2.10 --> on my mobile appeared enterBL.exe and was asking me if I should run it Y/N. Then I replied with yes --> afterwards it appeared the bootloader
IPL-SSPL by Desc
SPL-1.09ds
but then there is no reaction for about half a minute. Afterwards it appears on the PC "error 260" (I should check if the cable is connected via USB)
However I see that USB appears on the bootloader screen. In my opinion it should work, but didn't !
if I go into bootloader I read following :
IPL --> 1.01
SPL --> 1.04
IMG 1.23.707.4
My desktop OS --> vista 64
windows mobile center --> V6.1.6965
Can it be that I need a special USB cable for my HTC ?
Or ????
Thanks in advance for your help.
I know that there is a problem with using 64bit OS versions, so if you have another computer you can use that isn't 64bit to check whether it is that or not.
Good luck
Thanks for your fast reply.
I tried on my other computer (laptop installed windows XP SP3). However I failed with the same problem.
When i first tried to flash my device i had a problem of it not connecting to the boot loader, it seemed that every time the phone changed to boot loader the computer would no longer recognize it and it wouldn't be synced with the computer. i think i managed to get around this problem by putting my phone into boot loader (ok button + power + reset button) and then connecting it for some reason the computer would then recognize it and it would work. I cant remember what it was i was flashing it may have been hard-spl
Hope this helps, Good luck
Edit: I found this information on completely different forum that came from HTC about what to do
HTC's Answer: I was instructed to disconnect and soft-reset. Then I was instructed to go to Settings>System>Memory>Running programs and Stop All. Including Active Sync. We then reconnected the phone. Established a sync and ran the utility. Active Sync still goes away and you get the falling tone of a Disconnect. Ignore it and proceed as if everything is connected. Bang Zoom. 10 minutes later I'm loading software. *dance*
Click to expand...
Click to collapse
this is what is meant to happen as i flashed a new rom the other day on vista and windows had to find the device again and reconnect i think after this small pause it worked again.
Ok, I tried. Following result :
I see that Serial goes to USB but then no reaction. I can see on the WMDC 6.1 --> it shows still "not connected".
I found one article below and tried as well but it starts not automatecly from the bootloader too :
HERMIMG.nbh on a FAT32 filesystem
http://forum.xda-developers.com/files/hermes_sd_flashing.jpg
1. If you want to install any ROM (NBH) which is not supplied by your operator or the CID does not match then you will need to SuperCID your device. This can be easily done by installing HardSPL and should be the first thing done if doing any upgrading.
2. Empty (erase the contents) of your 2 gig or smaller non-SHDC MicroSD card (the Hermes bootloader does not support SDHC) from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work) make sure it's formated in FAT32 format. As a precaution you might want to check the MicroSD card for file errors. i.e (Properties->Tools->Error Checking)
3. Extract the .NBH file from your preferred ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
4. Rename the .NBH file to HERMIMG.nbh and copy it to the root folder of your microSD card.
5. With microSD card inserted on the phone, start the bootloader (hold Ok button on left side and POWER button at same time and stick with stylus in RESET on bottom).
6. You should see a screen similar to the one pictured on the left (What lines appear depends on what is included in the nbh. If the file doesn't include bootloader code, that line will not appear, and so on.) Confirm flashing on screen by pressing the power button.
7. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
8. After you get the confirmation that the upgrade is complete, softreset your device.
So you tried flashing using the sd card method and still no result?
yes
and now I tried your suggestion with stop running programs activsync and calender.
Also the same --> error 260
I would've hoped that one of the methods would work, i take it the device syncs up fine normally to device center and you can access all your files etc?
This is the thread i quoted from there is some more information about the problem i don't know whether it will help though.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=42389&view=by_date_ascending&page=1
yes I can synchronize and I can see all the file via vista explorer.
I take it your planning to flash a newer rom onto your hermes, are you running the stock rom that came with it at the moment?
I just ran the hard-spl ruuwrapper.exe on my computer with out my phone connected this gave me the 260 error so it is most probably something to do with the phone connecting whilst in boot loader mode, did you click yes to run any program that it asked you to on the phone?
I did read some where that resetting the pc might work but i dont know whether it will make a difference considering you've already tried it on another computer.
Good luck
See my comments inline :
Scotty93 said:
I take it your planning to flash a newer rom onto your hermes, are you running the stock rom that came with it at the moment?
Actually I bought the HTC in Taiwan (CHT is the brand on the front) in a shop. At the beginning there was a chinese OS and the seller in the shop changed it to the english version.
I just ran the hard-spl ruuwrapper.exe on my computer with out my phone connected this gave me the 260 error so it is most probably something to do with the phone connecting whilst in boot loader mode, did you click yes to run any program that it asked you to on the phone?
yes, it appered enterBL.exe on my mobile. Then I answered with Y.
I did read some where that resetting the pc might work but i dont know whether it will make a difference considering you've already tried it on another computer.
yes, on my laptop (windows xp). The same problem -->error 260. There is only one difference between my desktop and my laptop. activsync (with windows xp) drops during using the program RUUWraper which WMDC 6.1 (with vista) does not.
Good luck
Click to expand...
Click to collapse
i dont really know what to suggest, what happened when you tried flashing it using the sd card method?
Tried already. Not working too.
program starts not automatically with .nbh file from the SD card when I went into bootloader.
you could try the sd card method again, following the instructions Here to the letter and see how it goes because that should bypass the problem of it not connecting and should work.
Scotty93 said:
you could try the sd card method again, following the instructions Here to the letter and see how it goes because that should bypass the problem of it not connecting and should work.
Click to expand...
Click to collapse
I tried again to flash via SD card but my mobile does not recognize the .nbh file. The mobile stays in bootloader mode and does nothing.
Edit :
maybe I made something wrong ? I used the .nbh file from the Hard-SPL. Is this ok ?
i have attached the .nbh file from hard-spl. renamed to what it is needed to be to work. reformat the memory card so that it is blank and in fat32 format, put this file on it and follow the rest of the steps.
Scotty93 said:
i have attached the .nbh file from hard-spl. renamed to what it is needed to be to work. reformat the memory card so that it is blank and in fat32 format, put this file on it and follow the rest of the steps.
Click to expand...
Click to collapse
Thanks. My SD card is already formatted with FAT32. Is it really necessary to format it again ? I deleted only the files on the SD card and tried it already but it did not work.
If yes to format FAT32 again, do you have also a program for FAT32 formating which is running on vista ?
I downloaded fat32format already but I have to find an adapter to put it into the PC to format. Or is there another possibility to format ?
From the PC I did not find a possibility to access to format directly on my mobile.
there is a formatter on vista but the memory card would have to be connected to the pc, when i brought my micro sd card it came with an adapter to an sd card so i can use it in a usb card reader or the one on the front of my tower.
other wise i dont know if you can format it this way whilst it is connected to the phone.
Scotty93 said:
there is a formatter on vista but the memory card would have to be connected to the pc, when i brought my micro sd card it came with an adapter to an sd card so i can use it in a usb card reader or the one on the front of my tower.
other wise i dont know if you can format it this way whilst it is connected to the phone.
Click to expand...
Click to collapse
Ok thanks. I have to buy an adapter. Then try again.
ye im afraid so i cant think of any other ways that might get your device to flash, you could always wait to see if one of the more senior members replies although you may have to wait until tomorrow.
Hi All,
I have a little problem with my HD2. It has bin there for quite some time but in the past i used Active sync as a workaround to flash my Phone.
But i want to update my radio now. And i'm on Android NAND and SD. So normaly you just flash your radio or winmo 6.5 rom trough HSPL.
But when i hold volume down and boot HSPL i get the tri color screen. But i get a Serial message in the botem of the screen. And it just stay's there.
I took a other SD card formatted it with FAT32 and placed the LEOIMG.nbh file on that location but still the same issue. Cant flash the radio or the wimo rom. Does anyone have a idea how to fix this?
Thanks in advance!
Nelthalin said:
Hi All,
I have a little problem with my HD2. It has bin there for quite some time but in the past i used Active sync as a workaround to flash my Phone.
But i want to update my radio now. And i'm on Android NAND and SD. So normaly you just flash your radio or winmo 6.5 rom trough HSPL.
But when i hold volume down and boot HSPL i get the tri color screen. But i get a Serial message in the botem of the screen. And it just stay's there.
I took a other SD card formatted it with FAT32 and placed the LEOIMG.nbh file on that location but still the same issue. Cant flash the radio or the wimo rom. Does anyone have a idea how to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Can you sync your phone with the computer? Otherwise you may have a bad USB port. Also, try a hard reset (backup first).
stevedebi said:
Can you sync your phone with the computer? Otherwise you may have a bad USB port. Also, try a hard reset (backup first).
Click to expand...
Click to collapse
Well i dont sync my tel trough USB with android. I dont have wimo anymore.
And about the USB port i use that to put music on the SD card and make android backups. And i have not had issues.
The HSPL does not flash from USB it should pickup the image file on the SD card.
Nelthalin said:
Well i dont sync my tel trough USB with android. I dont have wimo anymore.
And about the USB port i use that to put music on the SD card and make android backups. And i have not had issues.
The HSPL does not flash from USB it should pickup the image file on the SD card.
Click to expand...
Click to collapse
I suppose since you are not using WM, there is no option to change the USB port from syc to USB drive? Checking this setting would be the suggestion at this point. You are right, the USB port works.
stevedebi said:
I suppose since you are not using WM, there is no option to change the USB port from syc to USB drive? Checking this setting would be the suggestion at this point. You are right, the USB port works.
Click to expand...
Click to collapse
I cant remember there was a need to change any option to flash from SD card with HSPL. The only thing you needed to do is place the image with the correct name.
Couple points.
1) When you put it in tri-color bootloader then connect to your PC, does it not say USB? If it does you can flash via RUU, if not we have a problem.
2) You cannot flash anything from a microSD above 8gb. If you are using a 16 or 32 then that is your problem, try an 8 and you will be fine.
Nelthalin said:
I cant remember there was a need to change any option to flash from SD card with HSPL. The only thing you needed to do is place the image with the correct name.
Click to expand...
Click to collapse
On WM, you cannot flash via USB unless it is in activesync mode. Otherwise the computer just sees the device as a USB drive. I don't know about other OS.
orangekid said:
Couple points.
1) When you put it in tri-color bootloader then connect to your PC, does it not say USB? If it does you can flash via RUU, if not we have a problem.
2) You cannot flash anything from a microSD above 8gb. If you are using a 16 or 32 then that is your problem, try an 8 and you will be fine.
Click to expand...
Click to collapse
I will try that.
As for the SD card i was using a 4GB card.
stevedebi said:
On WM, you cannot flash via USB unless it is in activesync mode. Otherwise the computer just sees the device as a USB drive. I don't know about other OS.
Click to expand...
Click to collapse
Y i know. Dont think there is a way to flash in android. It might be possible to flash trough MGDLR with the right tools. But as far as i know there are only Android NAND flash tools not Wimo / Radio. But i will try the USB connection trough HSPL.
Nice the USB connection did work on my new PC! i had problems on a old one maybe thats why i forgot about that.
Win7 detected the flash device installed the drivers and after that i could use the CustomRUU to flash.
Still strange that the SD card did not work. But now i have a working solution Thanks guy's!!
Nelthalin said:
Nice the USB connection did work on my new PC! i had problems on a old one maybe thats why i forgot about that.
Win7 detected the flash device installed the drivers and after that i could use the CustomRUU to flash.
Still strange that the SD card did not work. But now i have a working solution Thanks guy's!!
Click to expand...
Click to collapse
For Nand Android, when you reboot, you will come to a white "fastboot" screen.
Press Power button while this screen is still on, and it will bring you to the CWR screen where you will be able to update from sdcard.
http://forum.xda-developers.com/showthread.php?t=1914723
Post #3
Nobody have an idea why I cant have my phone recognize by the pc and the phone when i plug it in???? inb4 : another cable, another computer, uninstall the driver etc. all did this method many times. I am with videotron and the only ruu is a .exe and I think my bootloader have to be locked but how to locked it if the computer do not recognize it ?????? Im out of breathe I have spend many hours trying to solve my problem searching the net but no luck. But fortunately I have succeeds one time but after a reboot it rebegins.
LeGenDz R3DeaDz said:
Nobody have an idea why I cant have my phone recognize by the pc and the phone when i plug it in???? inb4 : another cable, another computer, uninstall the driver etc. all did this method many times. I am with videotron and the only ruu is a .exe and I think my bootloader have to be locked but how to locked it if the computer do not recognize it ?????? Im out of breathe I have spend many hours trying to solve my problem searching the net but no luck. But fortunately I have succeeds one time but after a reboot it rebegins.
Click to expand...
Click to collapse
After some reflexion my conclusion is I dont knoow why but it seems that the phone think that the internal sd card card is my micro sd card and vice versa .
P.S.: it is normal to have the folder androide.secure on the ext_sdcard but not on sdcard?
LeGenDz R3DeaDz said:
After some reflexion my conclusion is I dont knoow why but it seems that the phone think that the internal sd card card is my micro sd card and vice versa .
P.S.: it is normal to have the folder androide.secure on the ext_sdcard but not on sdcard?
Click to expand...
Click to collapse
Does the computer even detect that you have anything connected to the computer?
My android.secure folder is on (internal) sdcard. The ext_sdcard does not have that folder present.
Are you booted in fastboot?
yes but it detect a unrecognize usb device. And i think that fastboot is on in speedrom 7.5 but I put the old htc setting and disable it but it did nothing.
Hey,
I was dumb and wiped my internal storage. I can boot into Recovery and into Fastboot, but I don`t Know, how to flash a rom now. Please help me!!!
And no, I don't have a SD card.
Thanks
IchBinNoob said:
Hey,
I was dumb and wiped my internal storage. I can boot into Recovery and into Fastboot, but I don`t Know, how to flash a rom now. Please help me!!!
And no, I don't have a SD card.
Thanks
Click to expand...
Click to collapse
U can use a USB OTG or SD with the stock rom or u can push the zip via adb and flash via recovery.
Sent from my ONE E1003 using Tapatalk
Funk Wizard said:
U can use a USB OTG or SD with the stock rom or u can push the zip via adb and flash via recovery.
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Thanks, but I am not able to activate adb in TWRP (it error) and I don't have an USB OTG cable. Waiting for other answers...
IchBinNoob said:
Thanks, but I am not able to activate adb in TWRP (it error) and I don't have an USB OTG cable. Waiting for other answers...
Click to expand...
Click to collapse
Whats the error ? adb will work with adb sideload! Try blu spark's TWRP! @IchBinNoob
Just put a rom in an SD card and put it in your phone. flash it then
IchBinNoob said:
Thanks, but I am not able to activate adb in TWRP (it error) and I don't have an USB OTG cable. Waiting for other answers...
Click to expand...
Click to collapse
There may be other answers but there is no other way.
Sent from my ONE E1003 using Tapatalk
Hakim Farouk said:
Just put a rom in an SD card and put it in your phone. flash it then
Click to expand...
Click to collapse
I writed it in my question, I don't have a sd card
TheDj408 said:
Whats the error ? adb will work with adb sideload! Try blu spark's TWRP! @IchBinNoob
Click to expand...
Click to collapse
I have Blu sparks recovery, if I start the adb sideload there just stands, that is ist starting, and after a few minutes there appears that it has errored.
IchBinNoob said:
I writed it in my question, I don't have a sd card
Click to expand...
Click to collapse
borrow it from someone for abit. sd card is easy to come by. cause if you can't do adb, there's really no other way to flash your rom in then via otg or sd.
Hakim Farouk said:
borrow it from someone for abit. sd card is easy to come by. cause if you can't do adb, there's really no other way to flash your rom in then via otg or sd.
Click to expand...
Click to collapse
Ok. But how do I put a SD card of this size in my Computer? (If I would borrow one)
IchBinNoob said:
Ok. But how do I put a SD card of this size in my Computer? (If I would borrow one)
Click to expand...
Click to collapse
omg, are you serious.. you can use an adapter. If they don't have an adapter, just put the sd card into some other phone, and connect that other phone via usb to your pc and transfer the rom
TheDj408 said:
Whats the error ? adb will work with adb sideload! Try blu spark's TWRP! @IchBinNoob
Click to expand...
Click to collapse
So... I don't even know, if I use ADB right. I use it in this way:
I boot into recovery - Open ADB on Computer - Plug my phone into the computer - Tap in the recovery ADB sideload - Its loading, loading... While its loading I check, if my ADB on my computer finds my phone (adb devices), it don't find it - my phone displays after a few minutes a red error (just one word, error)
So, am I doing right? Please correct me, if I doing sth wrong. Thanks
If you have TWRP then you should be able to connect your phone to PC via usb and transfer data on internal storage via MTP.
Hey,
All u need is a little work, firstly I would recommend you to buy 1 sdcard as it's so cheap and easy to get rather than borrowing it from friend, as u may need it again sooner or later.
Second, after u plug in usb cable to pc, please check whether your pc has installed right adb driver for your device or it wont work for adb sideload command.
Third, ensure you have the right rom for your device, I assume you have it downloaded into your pc. Just open the adb terminal and type adb sideload filename.zip . and it will automatically start installation process.
Dont forget to make a full nandroid backup at least once and save it in Sdcard or cloud storage for emergency case like one you're facing now.
Good luck buddy [emoji1]
Sent from my roboticdroid using Tapatalk
RidzVarn said:
Hey,
All u need is a little work, firstly I would recommend you to buy 1 sdcard as it's so cheap and easy to get rather than borrowing it from friend, as u may need it again sooner or later.
Second, after u plug in usb cable to pc, please check whether your pc has installed right adb driver for your device or it wont work for adb sideload command.
Third, ensure you have the right rom for your device, I assume you have it downloaded into your pc. Just open the adb terminal and type adb sideload filename.zip . and it will automatically start installation process.
Dont forget to make a full nandroid backup at least once and save it in Sdcard or cloud storage for emergency case like one you're facing now.
Good luck buddy [emoji1]
Sent from my roboticdroid using Tapatalk
Click to expand...
Click to collapse
Thanks I try it now
IchBinNoob said:
Thanks I try it now
Click to expand...
Click to collapse
hell.... @IchBinNoob ...
Are you serious? go to some electroic store (mediamarkt, saturn, euronics,...) and get some sd-card.... dude that sh*t costs not more then 10€...
raulx222 said:
If you have TWRP then you should be able to connect your phone to PC via usb and transfer data on internal storage via MTP.
Click to expand...
Click to collapse
Hey, I am not a noob, but I too accidentally deleted my internal memory of samsung SM-N750. I am quite experienced in using odin and flashing kernels etc. But I am stupidly impatient. Today I performed a nandroid backup, then went ahead and wiped off ALL DATA except sd card! It was cuz of lack of awareness and shortage of time. I am preparing for my college exams, suddenly xposed framework caused repeated bootloops, so I decided to perform a proper rom installation, root and xposed right from scratch.
Anyways, I easily installed the lollipop rom via odin, rooted it and everything's peachy.
Is there any way of recovering that nandroid backup zip file, which was on the internal storage? In short, Does twrp perform a full wipe or quick wipe of storage?
I tried using an app "undeleter" but it didn't find any such (around 4gb) zip file in the internal storage. Any other android or windows based apps?
I don't stand to lose too much, just that I would have to install all apps and settings etc which will waste a lot of time.
@arya809
I believe that big files are harder to recover. There's an app called DiskDigger but to recover .zip files you need the pro version which is paid and it can't guarantee that you will recover your file. I do not know any other app that might help you (there are many apps for windows but I can't recommend a particular one since I haven't used any).
If you didn't lost important data I will recommend to install them manually. You can use your PC and install the desired apps directly from http://play.google.com/ (it might be slightly faster to find and install them).
Boot up the recovery, plug it into your computer, your device should show up in the file manager, copy the ROM to the device, and then flash it
IchBinNoob said:
Ok. But how do I put a SD card of this size in my Computer? (If I would borrow one)
Click to expand...
Click to collapse
There is a device called card reader(some wizard from hogwarts invented it) which will help you to copy data to sd card from your computer
And did you tried mount option in twrp???
In twrp first click mount internal storage the connect it with usb cable it will show storage on your device then copy the rom to it.
Sorry for bad english