hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
1. try changing USB cable.
2. redownload ROM, it may be corrupted.
yes but now i can't restart my xda. charges is on but don't wanna to start.and i hav ever try with usb cable.Wich rom do u think i hav to try if i can deblocked him ?
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
dune_973 said:
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
Click to expand...
Click to collapse
try downgrading first to original o2/MWG WM5 then flash to any cooked ROMs
i hav done a upgrade and after a hard reset my xda stay on 02 screen.nothing else
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
dune_973 said:
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
Click to expand...
Click to collapse
did you remove miniSD when you flashed via bootloader?
yes .same result.
I mind me something after read forum and wiki.my device is not locked and i should done a cid unlock or a hard spl ?
Cuz i hav download all rooms and each stop at 14% same in mini sd and each time i got the spash screen.
Someone can help me about this
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
kind to flash by boot loader ( ACTION+SOFT RESET ) by USB cable ,if you use
SD card it risk to brick atom.
Related
Dear All master,
I need help on my o2 Atom, when I upgrade it to latest version, it stop on stage 5: Burn in Radio Rom, 0%. Nothing happen even I had to wait for 1 hour.
I upgrade it with original atom rom from o2 site : 'Xda-Atom-ENG-20060426-MOT0822.exe'
The device stay in "O2" screen. this device can switch to diagnostic mode.
what should I do?
Note I repeated loading rom but Ietunai problem in Flash
Probably the Radio Hardware broken.... try to install without the Radio ROM.
sliders7 said:
Probably the Radio Hardware broken.... try to install without the Radio ROM.
Click to expand...
Click to collapse
from wher i can find that rom ?
or can u upload it ? for me plzzzz
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
medkid said:
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
Click to expand...
Click to collapse
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
waseemraj said:
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
Click to expand...
Click to collapse
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
sliders7 said:
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
Click to expand...
Click to collapse
i just do as u say but the but it fail gives the eorr as i told in my last post
and plzz tell me is i just have to get it in bootmode and conact it with usb and start updating
what is DSUU?? is this the file Xda-Atom-Exec-ENG-20060721-MOT0822 ? or what ?
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
homer285 said:
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
Click to expand...
Click to collapse
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
some one plzzzz help me ? for my atom exec
waseemraj said:
some one plzzzz help me ? for my atom exec
Click to expand...
Click to collapse
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
sliders7 said:
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
Click to expand...
Click to collapse
The above information will likely do more harm than good!
waseemraj said:
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
Click to expand...
Click to collapse
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
homer285 said:
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
Click to expand...
Click to collapse
Confirm!!!
I have done this also even using 1 GB memcard, my memcard is NCP mini SD.
I don't know it was lucky or it does work for 1 GB memcard. Even with non empty one.
But becareful, maybe I am just lucky, perhaps you should use 256 MB or 512 MB only.
homer285 said:
The above information will likely do more harm than good!
Click to expand...
Click to collapse
hei... he is desperately need help.
We all want to help him, thats all i can offer.
If you have different method.. thats a good news for him.
everybody here try to help him.. contribute something to help him.
so no more harm to his already broken device.
think the brighter side!
cheers
i tried to update to wm6.1
then my phone hanged to the boot loader screen.
i tried to reverse to the old way i get the error 300 invalid update tool,
i tried to upgrade the hardspl using the upgrade tool it replies the same error
i tried to use PVtemp, it replies the same.
can anyone help me ?! PLEASE URGENTLY
btw i've search the forum for answers specially http://forum.xda-developers.com/showthread.php?t=353547 which was very helpfull but still have the same problem,
crazy_luv said:
i tried to update to wm6.1
then my phone hanged to the boot loader screen.
i tried to reverse to the old way i get the error 300 invalid update tool,
i tried to upgrade the hardspl using the upgrade tool it replies the same error
i tried to use PVtemp, it replies the same.
can anyone help me ?! PLEASE URGENTLY
btw i've search the forum for answers specially http://forum.xda-developers.com/showthread.php?t=353547 which was very helpfull but still have the same problem,
Click to expand...
Click to collapse
replied to you, see my thread...
==Solution Found==
==Solution Found==
okay let me explain, the rom update utility shipped in PVtemp file seems not working and always gets that error 300.
i used ftp://xda:[email protected]
and the same nknbf file it worked fine till now it's 82% now wish me luck
am planning to do HARDSPL afterwards ..and reupdate with the WM6.1 again
WISH ME LUCK
crazy_luv said:
==Solution Found==
okay let me explain, the rom update utility shipped in PVtemp file seems not working and always gets that error 300.
i used ftp://xda:[email protected]
and the same nknbf file it worked fine till now it's 82% now wish me luck
am planning to do HARDSPL afterwards ..and reupdate with the WM6.1 again
WISH ME LUCK
Click to expand...
Click to collapse
good luck
what was the full path of the tool you used to fix the update tool problem? im getting the same thing and it sounds like you might have a viable solution, but the link is broken.
shizenyasuya said:
what was the full path of the tool you used to fix the update tool problem? im getting the same thing and it sounds like you might have a viable solution, but the link is broken.
Click to expand...
Click to collapse
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
Flash to WM5 ( as the result..) with the about NVID
Only in bootloader
My htc could only start in bootloader mode and it seems to freeze in this mode(i can tell this because when i remove the cable it still writes USB in the left corner). How can i flash a rom to it. Please help me.
w4rius said:
My htc could only start in bootloader mode and it seems to freeze in this mode(i can tell this because when i remove the cable it still writes USB in the left corner). How can i flash a rom to it. Please help me.
Click to expand...
Click to collapse
where no one read my sticky thread??
In tried Sd flashing(none other way works(
it stops for 5sec on
"Checking SD content"
but the processbar doesn´t change and then it goes to bootloader without changing anything.
i have same prb with my imate kjam... i tried to upgrade now its dtuch on start..
and itoo getting error when i tried to instal no vender rom.. plz tel me guyz. plz help me.
i flashed a stock SE 2.1 generic ...and changed the BB to 52 ton install CM7 ...but after i shutted down the phone i wouldnt boot and when i try to flash a Stock SE or try to change the BB it always give me error flashing ...aborted no matter what the file is ...i ve searched in all post but i didnt find any answer ...please some help
Edit: there is a guy here in morocco who fixed the probleme by changing battery and flashing a stock rom ...i will ask him to show me how he did ( if he say ok) ...sinse i used every software and flashtool i found in internet whithout success
Did you try flashing a ROM thru SEUS? It will overwrite whatever you have on there
could u give me a link to download because this X10 is not mine i just try to fix it for a freind and i'm not an expert yet in x10 programmes ...thank u
http://www.sonyericsson.com/cws/sup...s/subject/updateservice/xperiax10?cc=gb&lc=en
Flash with that and you should be all set
thanks man ...downloading
will let u know
just hit the thanks button if it works =)
i will hit it even if it didnt works ...i get cannot identify the device ...any ideas
Did you enter flashmode correctly?
yep i did ...just like they said and just like the description in the flash tool thread .... i will reboot the computer maybe it will be ok after
alright well keep me updated
nothing new ....failed again to identify the device ...i've serached in posts but no answer
idk i try flashtool whenever i mess up my phone, try redownloading the drivers on your computer and flash the SE firmware with the latest flashtool
i did try ... i unistall the updater and instal it again ...it reconize the phone but programme is frozen is it normal to freeze?
well flashtool should take around 10 mins and less
yes but at least u can see the progress bar and u know what to wait ... well i guess i still have some research to do ...any way thank for the help and u got any idea just let me know
do you have pc companion?
i just install it and when i plug the phone it reconize it ... but when i try to repair it it just give me an error it said cant download
Mootmetal, I've got the exact same problem. I've tried everything. I've been trying to fix my phone for over 6 months and nothing has worked.
Please someone help!
See my thread here:
http://forum.xda-developers.com/showthread.php?p=15451846#post15451846
test with this driver
barrac28 said:
test with this driver
Click to expand...
Click to collapse
what i'm supposed to do with this driver ? do i need to replace a folder with this?
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
hi
u can use wotanserver it ll solve
If can't solve you have to find someone who have octopusbox or other..
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
ahmad.omr said:
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
Click to expand...
Click to collapse
And you can connect thru Flastools?
Xmasp said:
And you can connect thru Flastools?
Click to expand...
Click to collapse
It can't find my phone !
This happened to me in february with my Xperia X8. The weird thing is I totally killed my phone trying to opening the bootloader, but you say your Ray is dead 'cause you installed Pureness and flashed a baseband; I'm not an expert but I think flashing the baseband messed with the bootloader, of course, if I'm wrong please someone correct me.
I tried to revive my X8 with all methods I found around the web, with no results. The only advice I can give is trying to find a person with Medusa Box and see if he can bring your Ray back to life, but this may be quite hard.
Or... Sending to SONY support, maybe they could fix it, as you didn't touch the bootloader, but if it was already unlocked, then they wouldn't do anything for you.
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
XrayCharles said:
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
Click to expand...
Click to collapse
did you try and fix with seus/sus.....if it doesn't won't to work try these instructions: http://forum.xda-developers.com/showthread.php?t=1492805&highlight=unbrick
I think if u flash baseband, the phone should be back to factory reset...
I have flashed via flashtool new baseband on stock rom ics, from .72 to .77
After reboot,all of my apps have gone..just like we buy a new phone...
But i dont know in pureness (custom rom)... is that baseband made the phone to factory reset or not...
I think u should inject ur phone with JTAG.. This somekind of stuff that sony nor samsung have at the customer service...
It used to hardbricked phone
Sent from my ST18i using xda premium
ahmad.omr said:
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
Click to expand...
Click to collapse
how did you get to this mode?
This mode basically is under qualcomm usb download mode. I'm not sure but you can try to search under htc forum where got lot of powerful dev for this prob. I think you have to install like qualcomm usb driver in order for the phone to be properly detected by the computer. Then you need some kind of qualcomm program in order to use the phone with? probably qms or something? try google for "QHSUSB_DLOAD"
I had the same situation. nothing will help here. flash memory is dead. so in my case I flashed ics then stock rom and it rebooted and same symptoms . so the only way out was to buy broken xperia ray on ebay and change phone's "motherboard"
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Well ...
david.wilson.1987 said:
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
??? ... but you can't flash WM on MAGLDR !!!!
david.wilson.1987 said:
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
Click to expand...
Click to collapse
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
hitman1376 said:
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Well ...
david.wilson.1987 said:
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Click to expand...
Click to collapse
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
eretrs that
hitman1376 said:
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Hey thanks but I have just spent ages downloading and setting up that software to eventually get to video tutorial where I am then told that you still need activesync. As stated earlier my activesync is not working my phone is not being recognised on activesync and that is where my problem lies so please if you can help with that then good. Cause otherwise im wasting my time
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Mister B said:
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Click to expand...
Click to collapse
I have done the uninstall and install of activesync but I haven't tried removing sd card so will try that again.if it doesn't work I will then try a newer computer and see if I can get it working through wmc instead.
I have tried everything that has been suggested. Task 29 also isnt working as it requires activesync dies not recognise device.
Thanks for trying to help everyone. I managed to sort it and it was the hspl had messed up I have sorted it amd now thats me in android so goodbye windows phone lol