Related
Someone reported the same problem as me with Crystal V1 here: http://forum.xda-developers.com/showthread.php?p=1499973&highlight=certificate#post1499973
I'm having this same problem with Touch V7. CE Star (or all other SIP input methods for that matter), the program simply doesn't install at all!
for CE Star, the shortcut does appear in the program list, but launching it will say "winxe cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
is there anyway to solve this issue? i'm on the verge of smashing the phone already!
appreciate all helps! =)
no one knows why?
Stratix said:
Someone reported the same problem as me with Crystal V1 here: http://forum.xda-developers.com/showthread.php?p=1499973&highlight=certificate#post1499973
I'm having this same problem with Touch V7. CE Star (or all other SIP input methods for that matter), the program simply doesn't install at all!
for CE Star, the shortcut does appear in the program list, but launching it will say "winxe cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
is there anyway to solve this issue? i'm on the verge of smashing the phone already!
appreciate all helps! =)
Click to expand...
Click to collapse
i installed CE-Star without any problem....... penpower hand writing works good too.
btw.... which version of CE-Star u installed?
The problem is not consistent and therefore it's hard to isolate the cause. One member managed to get rid of it by reflashing and start all over again.
the first step to sort the mess out
rondol1 said:
The problem is not consistent and therefore it's hard to isolate the cause. One member managed to get rid of it by reflashing and start all over again.
Click to expand...
Click to collapse
I'm under the impression that users sharing this problem seem to install Ce-star before things weng wrong. I used to install the one and only one application, Ce-star, to Gullum's roms including V7.
Many other dlls being trigered by apps whose shortcuts been put into the startmenu folder from the SD card rather than fully installed, of course, might also have a hand in the fault.
So, my idea is users having the same problem leave a note to tell whether Ce-star's installed as a first step to sort the mess out.
Certification of files...
I usually post on the Univeral forums but if you have a problem with certification of files you may try this cab file - hopefully it will help (though since it was originally in Helmi's WM6 1.1 ROM I take no responsibility for it causing problems though! )
View attachment SdkCerts.cab
I allreyd flashed a lot and did use a soft spl, but I do not find a proper
explanation what it is.
So, i Think it is the Bootloader ?
Can anyone tell me what a soft and a hard SPL is and does ?
For what do I need it ?
I just got my new Touch Pro bought in UK and now it is here in Germany and I want a german ROM on it as soon as it is available.
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threats
Greetings
Marcus
69reichertm said:
....So, i Think it is the Bootloader ?...
....Can anyone tell me what a soft and a hard SPL is and does ?....
Click to expand...
Click to collapse
Yep your right on that assumption sir The bootloader does alot of the low level handling of the startup process when you power on the device aswell as handling the process when you flash anything to the device...im sure its far more technical than that but thats a starter explanation Essentially you NEED a bootloader for the device to work at all, the case with many of the HTC devices...other devices are different most likely.
Soft SPL: (normally referred to as SSPL) IS loaded into RAM and allows you to perform some of the operations the standard bootloader would do, naturally with some extra functionality (explained later)
HardSPL: Same sort of thing except it is flashed to the device permenantly, so it replaces the HTC bootloader in your devices flash memory.
Both of these tend to safeguard against corrupting the device by having some fancy workarounds and updates to the processes built into the HTC SPL, and the best part is that they allow you to flash ANY ROM you wish therefor allowing us to use Cooked ROMs and various updates like radio updates and etc...frees the device up quite superbly.
69reichertm said:
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threads
Click to expand...
Click to collapse
Perhaps some mebers feel like adding a general HardSPL page to the wiki for FAQs like this to be answered better than "Search the forum.." since we know its not that good for finding anything.
The Wiki is there for everyone to use and edit so, learn and pass it on
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Hello !
Thank you for your advise.
One more question:
Should I install Hard or Soft SPL ?
I want to try out many ROMS - I think Hard is better, what do you mean ?
Thank you for your help
By the way:
I am a kind of technican - working in IT for nearly 18 years starting fron Novell, Banyan Vines and DOS up to Windows Vista. Also I am a kind of apple Guru, thats why I have certainly an iPhone 2G and 3G.
For business I use HTC devices sind the first MDA. But I lost track a little sind iPhone.
As I am a technic nerc I sstarted with th the Diamond touch again and I liked the device but i swapped this week to the touch pro because of the keyboard, SD Slot an flash light. I love this device.
By the way I also have the new Samsung Omnia 900 here and an unfun Nokia E71 ( I hate this old symbian - looks like last centuty )
So good night and thank you
Marcus
Jiggs1337 said:
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Click to expand...
Click to collapse
no, raphael hardspl is unsigned, means any rom is allowed, including HTC official roms.
69reichertm said:
One more question:
Should I install Hard or Soft SPL ?
Click to expand...
Click to collapse
you can only install hardspl. the job of soft spl is to install hardspl.
do not ever try any of the following:
- with SSPL, do not flash anything other than the included SPL NBH files. as extra protection the diamond and raphael SSPL's require htchacker sign (except the version jocky edited) and will reject anything that's not an SPL.
- and do not ever try to flash SSPL as an NBH, especially if it is a diamond or raphael.
Im sorry to disagree with your "don't tell me to use the Wiki".
But this is a fairly comprehensive answer to your question: http://wiki.xda-developers.com/index.php?pagename=SPL Questions? straight out the wiki.
Ta
Dave
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Jiggs1337 said:
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Click to expand...
Click to collapse
Yes - Everything Goes.
No.
Ta
Dave
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Jiggs1337 said:
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Click to expand...
Click to collapse
There are several things.
UC is short for User Customisation; it is in all the Kaiser ROM's nowadays. l3v5y's Raph ROMs also have it.
Links: l3v5y's ROMs & Main UC Thread.
I use UC to install programs, Provisioning XML (as part of UC) to change registry settings, my xcopyce application to copy folders and active sync to copy contacts, calender etc.
Ta
Dave
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Jiggs1337 said:
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Click to expand...
Click to collapse
I can't say. I haven't done it, what says you will lose all the info, the RUU or the thread? If it's the RUU, then you should be OK, it's probably the standard message that the proper RUU (used for carrier ROM upgrades) has.
UC is good, takes maybe an hour or two to get setup, but once done, you don't have to do it again and it makes flashing so much fun. I started with just installing CAB's and Copying files, then went onto ProvXML for my registry settings next. The latest version of Schap's Advanced Config (3.0) can export tweaks into a Prov XML file for you. It is worth it if you flash your ROM as often as I do.
Dave
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Jiggs1337 said:
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Click to expand...
Click to collapse
We are getting a little off topic of the OP now but...
Any tweaks done with schaps Advanced Config can be easiler exported using a "export" menu option.
If you export your registry after flashing, and again after you have all your settings setup right, you can Diff then using a Diff Program and copy the changes into your ProvXML file. Most PPC Regedit programs can export.
Any more on UC, I'd have a read of the UC thread and ask any questions in there. Myself and l3v5y keep and eye on it most of the time and should be able to help fairly quickly.
Ta
Dave
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Thank you for all the help - now lets start using the Touch - weekend is near
69reichertm said:
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Click to expand...
Click to collapse
lol, sure, there is only one package, and you simply click the EXE and it goes
http://forum.xda-developers.com/showthread.php?t=410150
Is it possible to use those backup softwares? Like Spb Backup for example that say "ROM Upgrade Mode — now it's possible to restore data after the ROM upgrade"? Instead of UC and such?
there is a IPL initial program loader (sort of bios)
a SPL secondary program loader (kinda like the ntloader)
and there is a service mode (3 color screen) (the flashprog)
then we have a RUU remote unit upgrader
mft masterfile table
mbr master boot record
and some other shizzle
the device switches the output of the internal usb when device is in 3 colorscreen to a service mode which allows it to overwrite the internal flashdrive .. pretty neat as what it actually does is switching to an internal flashprogrammer which programs the internal flashdrive. this is the same process as is used for your pc at home to update the bios.
the CID celloperator identification code (used for blocking certain rom upgrades)
enjoy..
Soft SPL quesiton
I have a SPV M700 and it's unlocked. I want to install Schaps rom. I have the folowing SPL version 1.07.000. I have't managed to install hard spl. Can I use soft spl to flash it? Can I permanently brake it?
Hey guy,
I have a serious problem with my own mixed kitchen using "rgb-rgb's .pdf: Tutorial on porting XIP/SYS to Da_G's Raphael Kitchen".
I exactly follow the instructions;
cooked different packages in; tried with/no UC; ..
Well.. the Problem is first, that I can't read/write messages or mails (nothing happens after tapping on the item)
Second is, that Pop-Ups (e.g. connection setup) have no text and buttons don't work.
Hope you can understand my noob-english and help me solving the problem.
Thanks!
fubsle said:
Hey guy,
I have a serious problem with my own mixed kitchen using "rgb-rgb's .pdf: Tutorial on porting XIP/SYS to Da_G's Raphael Kitchen".
I exactly follow the instructions;
cooked different packages in; tried with/no UC; ..
Well.. the Problem is first, that I can't read/write messages or mails (nothing happens after tapping on the item)
Second is, that Pop-Ups (e.g. connection setup) have no text and buttons don't work.
Hope you can understand my noob-english and help me solving the problem.
Thanks!
Click to expand...
Click to collapse
Sounds to me like you're missing some localization (mui) files, or don't have the ones for your language included in the necessary packages.
For example, let's say you're building a German (0407) ROM. However, in your Connection Setup & Message Enhancement packages, you only have WWE (0409) mui files. Generally, you'll have buttons with no text, or things won't open because dependent files are missing.
Thanks for your reply
Unfortunately I don't include another language.
I only use the following two packages :
WM65-23016-21935-Kitchen-Fuze-TouchPro.rar
WM65-23403-CE-OS-5-2-4453-LANG-0409-DPI-192-RESH-480-RESV-640.rar
Did you do a Hard Reset after flashing? I normally flash and then at the alignment screen do a hard reset. The other thing you might want to try is flashing to a stock ROM first and then flash to your custom ROM.
I had the deal with the email at one time and I can't remember if it ended up being something with my files getting corrupt or if I just flashed to stock first and then the custom ROM. I did both things at least once or twice.
I know at one point, I did redownload the new build because I messed up the files in the kitchen somehow.
Hi,
i tried different things:
- Flashed via ActiveSync/SD-Card
- Flashed stock T-Mobile 1.90 Rom, then 6.5.23403
- Used the kitchen on Windows 7 rtm, Windows XP sp3...
- Of course did a hard reset after flashing
- hmm...
I uploaded my rom. If you like to test it...
http://www.sendspace.com/file/gq0xxa
Hope you can help me
edit: 23034 ist working really nice
Hello everybody...
This Message I left on an other thread for someone who asked for experience in using this app on a wm 6+ system:
"Just tested pocket Radiologist v2 on a stock 6.5 system of the htc HD2 and ready to revive this thread by now!
1. ADOCE had to be installed - otherwise the executable of the the app ****s up the executing.
2. installation of adoce is a bit tricky ... switch the OS-language (wm5 or 6 or 6.5) to englisch (british) if you use a foreign system. finally restart & install ADOCE. no matter if you switch back to your native language after installation.
3. start pocket radiologist - works but...
4. on the thc hd2 the font/character size is wrong. the toolbar/list which should be docked on the bottom of the screen floats about the half of it. trying to switch the screen to landscape with bsb tools doesnt work. I'm very sorry for this now!
5. Tried WVGA Fix 4 already - the characters' still far too big..."
Anyone's got an idea how to fix this character a/o resolution-problem?
Hope someone can help in the end.
I'm using the palm version on the palm emulator, works ok. the images are not great
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
jsmccabe78 said:
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
Click to expand...
Click to collapse
I did only the install procedure as described. first adoce, second the needed module. i installed it on main memory. execution after installation in that order made me no pain. i didn't transfer anything at all.
hope someone can solve the problem with this software...
Install completed succesfully, but I have the same problem as ppcppcppc (TS), so I hope someone can give input about a possible solution??
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.