Hello,
What I have done:
1. Unlocked with Olipro 2.40
2. Upgraded Radio to 3.35.4
3. Have flashed with several roms DCD3.0.1 Bell, DCD3.1.1, PPC Kitchen.
My problem:
At some point I must have carelessly flashed my phone with a sprint firmware. I am now stuck in Roaming and have no Data connection.
More Info & what I have tried:
1. I have read ogrins81 post here: http://forum.xda-developers.com/showthread.php?t=363693&highlight=FOR+BELL
This appears to be my issue, but I am not exactly sure what he did to fix it, what is the PRL file for and how can it be used? I tried DCD3.0.1 Bell hoping that would fix it but it does not.
2. ##778# - Works but it as me for a unlock code I do not have.
3. ##111111# - Does nothing now, this is what I used before.
4. I have run the Bell.cab from DCD3.1.1, didn't help
5. If i goto ##778# then view, MSID is correct but my ESN looks wrong, its should be my phone number as well shouldn't it?
Any help you can give me, I would be very thankful for, I have been on these and other forums for hours looking for a fix. And so far nothing I have found seems to work.
I'm not sure how Bell works with their MSL, but you need to do one of two things.
1. Your MSL (unlock code) is 000000.
2. If it isn't 000000, you need to use GetSPC and plug in your ESN in HEX (case sensitive) to generate your MSL.
After that, you need to get the latest PRL, put it on your phone, then use EPST (in edit mode) to manually select it.
Thank you very much that seems to have brought me one step closer. However it is still not working properly.
What I have done:
1. Used GetSPC to successfully recover the code and enter EPST
2. I went to View Info>PRL> Update PRL file, and selected 0TM31398.030 from here: http://forum.xda-developers.com/showthread.php?t=363693&highlight=FOR+BELL&page=3
3.Rebooted as it instructed to do so.
New/Continuing Issues:
1. My phone is no longer in roaming however it says I am with SprintPCS Now
2. Still have no data.
3. In EPST the NAM Name = SPCS, should this have not been changed with the PRL file?
That does not look like a PRL to me. I could be wrong because I dont know much about Bell...but PRL's are usually 5 digit names...all numbers...for example the Verizon PRL is 51020.prl. I bet if you get the proper prl and update using the same method as you used..youll be ok
The question then is where am I going to get a Bell PRL file, that link was the only one I could find. I also tried the "0000EPST.004" located inside "dcd Titan Carrier - Bell.cab" with no luck. Now I am trying to manually change PRL settings but it wont even let me change MNC to a 3digit number for bell, it wants 2 digits.
Things are kinda looking bleak Any one with a PRL file or a bell phone that could get me the PRL settings?
That IS a working PRL file, download it and use total commander to remove the txt extension and update your PRL
After reading up on Bell PRL's, the file you originally tried is the PRL for bell phones. You MUST make sure to get rid of the .txt extension on the end of it before you import it. DON'T just rename it. If you don't know how to do that, then let me know.
I tried it, and removed the .txt, it seemed to go in, but it didn't do anything. Most recently I have relocked my phone and flashed Bells firmware. Now it says I am bell again and calls work, but I still have no data. And the MNC still is just 00, maybe that is correct though?
I tried it, and removed the .txt, it seemed to go in, but it didn't do anything. Most recently I have relocked my phone and flashed Bells firmware. Now it says I am bell again and calls work, but I still have no data. And the MNC still is just 00, maybe that is correct though?
Click to expand...
Click to collapse
How did you go about removing the .txt extension?
I have tried the file as both 0TM31398.030 and 0TM31398.PRL
renamed it in windows, I have my own computer company the file was renamed correctly
renamed it in windows, I have my own computer company the file was renamed correctly
Click to expand...
Click to collapse
I am not doubting your expertise...but humor me..
did you let the customizations run after you installed the sprint ROM?
your phone was programmed with the sprint ERI. you need to get the bell ERI. I am not yet sure how you would do that...
I downloaded the txt file, two slow click to rename, removed the .txt extension. I have have "hide ext for known types" unchecked.
dcd1182 said:
did you let the customizations run after you installed the sprint ROM?
your phone was programmed with the sprint ERI. you need to get the bell ERI. I am not yet sure how you would do that...
Click to expand...
Click to collapse
Yes I believe that is what happened. Would have thought re-locking and re-flashing with bells firmware would undo that? But it doesn't look like it did.
student69 said:
Yes I believe that is what happened. Would have thought re-locking and re-flashing with bells firmware would do that? But it doesn't look like it did.
Click to expand...
Click to collapse
Anyone able to give this guy a copy of the Bell stock extrom?
Would this help at all? Got no idea about how bell operates...but I was fishing through some files from their Maintenance Update on 5/8 and found it.
Also, what would happen if he tried just flashing the bell ruu executable? No dice?
gcincotta said:
Would this help at all? Got no idea about how bell operates...but I was fishing through some files from their Maintenance Update on 5/8 and found it.
Also, what would happen if he tried just flashing the bell ruu executable? No dice?
Click to expand...
Click to collapse
i guess i for some reason thought a bell ruu wasnt available. it should flash the extrom, which should fix his problem.
that cab you posted may be the fix anyway..
No luck, I am going to try and flash the firmware with one that the Bell Support suggested then run the patch again.
Try flashing this
http://www.mediafire.com/download.php?di1lrhzvjlx
Related
Hey, I just got my hands on a Bell PPC6800 and am wanting to flash it. I'm really new to this so I've been trying to read up on things before I do it because I don't want to ruin work's phone.
Is there a way to get the stock rom from the phone in case I want to go back to it? I've seen a link to download it but it was broken.
Goto the Ustarcom website.
http://www.utstar.com/pcd/phone_downloads.aspx?bid=76&cid=16&mid=264&carrier=Bell Mobility
click on the EXE link. And download the file.
Note:
This completely resets your phone. Even the hard time counters.
It will be a brand new phone.
With that said, make sure you get the your MSL, MSDN, MSID numbers first. You'll need to re-enter them.
Same when you flash a new radio.
Hello,
I'm seeking some assistance, for a friend. he has the HTC 6800 as the thread title would imply on USCellular. I have a Samsung SCH-i760. I am trying to get him set up with WM 6.1 or at least threaded MMS.
Scince he has US Cellular he maintains that he cannot do this and or use the GPS.
any help is appreciated
BTW I searched USCellular, windows mobile 6.1 and some others and came up with very little.
so sorry for the Noob Question
BTW I was going to get the touch PRO... but VZW has implemented new policy that would charge me for a service I don't want, so it's not that I don't like HTC devices.. I'm just stuck with my Samsung.
slosho said:
Hello,
I'm seeking some assistance, for a friend. he has the HTC 6800 as the thread title would imply on USCellular. I have a Samsung SCH-i760. I am trying to get him set up with WM 6.1 or at least threaded MMS.
Scince he has US Cellular he maintains that he cannot do this and or use the GPS.
any help is appreciated
BTW I searched USCellular, windows mobile 6.1 and some others and came up with very little.
so sorry for the Noob Question
BTW I was going to get the touch PRO... but VZW has implemented new policy that would charge me for a service I don't want, so it's not that I don't like HTC devices.. I'm just stuck with my Samsung.
Click to expand...
Click to collapse
I am also looking for an WM 6.1 upgrade for my HTC 6800. USCellular does not offer one and on HTCWiki website there was not a upgrade offered because USCellular sucks. Please help!!!!!
DCD 3.3.4
ZP1085 said:
I am also looking for an WM 6.1 upgrade for my HTC 6800. USCellular does not offer one and on HTCWiki website there was not a upgrade offered because USCellular sucks. Please help!!!!!
Click to expand...
Click to collapse
If the acronym of your carrier is USCC try the dcd's titan ROM 3.3.4
You both have to post more infomation in what ROM and Radio your Titian devices currenty have.
Look at the compatible Roms/radio/Bootloaders wiki and you should be able to determin your next step should be. PM if you get stuck.
oneders65 said:
If the acronym of your carrier is USCC try the dcd's titan ROM 3.3.4
You both have to post more infomation in what ROM and Radio your Titian devices currenty have.
Look at the compatible Roms/radio/Bootloaders wiki and you should be able to determin your next step should be. PM if you get stuck.
Click to expand...
Click to collapse
Ok, to start off where do I find that info at? I figure its under the device info but all it gives is the ROM version which is 2.17.557.0 and for the radio it is 1.64.00....If this is not what you meant then where can I find that information. Thanks for your help by the way.
oneders65 said:
If the acronym of your carrier is USCC try the dcd's titan ROM 3.3.4
You both have to post more infomation in what ROM and Radio your Titian devices currenty have.
Look at the compatible Roms/radio/Bootloaders wiki and you should be able to determin your next step should be. PM if you get stuck.
Click to expand...
Click to collapse
Thanks man didn't really know where to start.
Using a rom like DCD is probably best for USCC customers since it's similar to their rom to begin with.
However, this is the key part for USCC customers, use QPST to backup your phone's programming, and go into EPST and write down the values from the HDR values, and after flashing the phone, use QPST to write back the values, and then go into EPST and verify your HDR values didn't change, otherwise you can lose data and/or EVDO access.
I did see that USCC put out a 6.1 upgrade for the 6900/Vogue, so this gives me some hope that they may eventually release one from the 6800. If they do then we are a lot better off because we could flash to this if the phone ever acts up and be guaranteed of warranty support. Right now, as soon as you flash the phone, you take a chance that USCC can claim you voided the warranty.
Do some research on how to use QPST and remember to write down the values in EPST and you should be fine, just take your time, and find a guide that you feel comfortable with.
BTC
Where can I find some detailed instructions for using DCD's stuff to update my USCC phone? I have looked in Q&A and on DCD's site and can't find any info. Thanks!
fish2222 said:
Where can I find some detailed instructions for using DCD's stuff to update my USCC phone? I have looked in Q&A and on DCD's site and can't find any info. Thanks!
Click to expand...
Click to collapse
Look into getting a copy of QPST, use it to read and store a copy of your phone's programming. Once you have done that, than any of the wiki's that have walk thrus on how to flash your phone will work, once it's flashed, then use QPST to read your backup file and restore it back to the phone.
Then you are all set.
If you are in SE Iowa, drop me a PM and maybe I can assist you in person.
BTC
Ok, now the question is, how do I use QPST to backup the settings? I have QPST 2.7 build 264, but all it has is COM ports, and no USB. I can't find any help or directions on how to backup the settings. I am in SE Kansas by they way, so it would be a bit of a drive. By the way, if I use this to back up the settings, do I still need to use ESPT to write down settings too?
fish2222 said:
Ok, now the question is, how do I use QPST to backup the settings? I have QPST 2.7 build 264, but all it has is COM ports, and no USB. I can't find any help or directions on how to backup the settings. I am in SE Kansas by they way, so it would be a bit of a drive. By the way, if I use this to back up the settings, do I still need to use ESPT to write down settings too?
Click to expand...
Click to collapse
You have to load the drivers for the phone on the PC, I will link you an article that has info on how to do this.
http://forum.ppcgeeks.com/showthread.php?t=36377
This is a guide to set up aGPS, but it does include instructions on how to use QPST to read the phone. Basically you just need to save the settings after reading them from the phone, and then after you are done flashing, read from your saved file and write to the phone.
FYI, this guide for aGPS works perfect on USCC, so you can get your friend hooked up with even better GPS if you follow the rest of the instructions in the guide. Tho do the rest of the steps after the phone is flashed.
As far as the EPST settings, the only things I have had to change are the HDR login and password, the password defaults to your ESN (correct), however the login defaults to your phone#@uscc.net, when it needs to be [email protected] (In HEX, not DEC)
For PPP login and password, it should be your phone#@uscc.net and phone# as password.
Without making this change, then EVDO won't work if you are in an EVDO area.
BTC
Ok, tried it, but when I tried to read the phone settings, it says that 000000 is not the correct code. Also, what info do you put in for USCC where the IP address and such goes after unchecking the boxes? I found all the other providers, but not USCC. Thanks!
fish2222 said:
Ok, tried it, but when I tried to read the phone settings, it says that 000000 is not the correct code. Also, what info do you put in for USCC where the IP address and such goes after unchecking the boxes? I found all the other providers, but not USCC. Thanks!
Click to expand...
Click to collapse
As for the SPC code, do a search for BAFMSL, and be sure to have compact .net 3.5 installed, it will show your MSL/SPC. As for the IP, use the one he gives for Altel, it works on USCC as well.
Follow all the steps for Altel.
BTC
Thanks for all the help. I got everything upgraded and now have GPS working. The only thing that seemed to be wrong was the login for data had the wrong domain name. Changed it to .uscc.net and it works great now. Now I just need to figure out how i can add themes to it.
Anybody have an themes info?
I know one way to do it is though the diag/qrt mode, but is there a way to do it from the phone without a computer? I was on the EVO forums and they have come up with a way by using ##775#, but a apk is required, i could not download it cuz their link was old, just trying to see if anyone knows?
I was wondering the same thing too. I would like to change my PRL as well. I think the first step is that you need your MSL number from Sprint.
EDIT: I tried the ##775# (##PRL#) method but it doesn't work.
EDIT2: I was able to flash my PRL successfully to an older PRL by following the steps in these 3 threads.
1) You need to get your MSL code from Sprint or follow these steps in this thread to get your MSL code.
http://forum.xda-developers.com/showthread.php?p=19744060#post19744060
2) Go to this thread first to read an introduction on what to do and to download the QPST program that is needed to flash your PRL file.
http://forum.xda-developers.com/showthread.php?t=1211157
3) Step by step with pics for Evo 3D on how to flash your PRL with QPST program but the steps are applicable to Photon as well starting from steps 8 and onward.
http://forum.xda-developers.com/showthread.php?t=1145111
4) I posted the VZ 3G roaming PRL 11115 for easy access.
Just post if you run into problems. I got it working on the first try. Now to do some speed tests to see if it makes a difference.
bump just for those interested in this.
thanks for your help, but i knew of that method, but i wanted to know if it was possible without a computer? As this would negate the benefits I get if i am already in good Sprint coverage, i usually go the mountains and there i am roaming but only get 1xrtt, For for EVO, you are able to change it on the fly.
Basically if i employ this method I can flash the Verizon PRL before i leave my house, and just do prl update to go back to stock (srpint), but I would not be able to revert back to a verizon one without a computer.
Settings>About Phone>System Updates>Update PRL
Thats how I have always done it?
dsims7_2000 said:
Settings>About Phone>System Updates>Update PRL
Thats how I have always done it?
Click to expand...
Click to collapse
We are talking about a way to force 3g on verizon when you are roaming
So, its been a rough time with this phone. I received it rooted and im really a noob to any of this, its a verizon phone, its labeled outside, and when you remove the battery it says model VS985. But in the settings it says otherwise. I placed an att sim card in it, and it worked fine, i just had some errors on the rom that i have no idea how to fix, it all just seems like a hassle to me, so i decided to unroot it to the best of my ability. I managed to download everything and when i ran the lg flash tool, i selected the firmware i downloaded, the verizon one, but when i tried to run it, it would say "Device Model is different" "factory model check error" or something like that, it would identify the phone has D850, which is at&t version.
So i went ahead and said **** it, i downloaded that version and went with that, something messed up and it ended with factory reset status 2 instead of 3.
So i had to select BOARD instead of UPGRADE in the flash tool. and it reset everything, booted with att logo and everything, now the only problem is i don't get any signal, at all. Any help?
cedric182 said:
So, its been a rough time with this phone. I received it rooted and im really a noob to any of this, its a verizon phone, its labeled outside, and when you remove the battery it says model VS985. But in the settings it says otherwise. I placed an att sim card in it, and it worked fine, i just had some errors on the rom that i have no idea how to fix, it all just seems like a hassle to me, so i decided to unroot it to the best of my ability. I managed to download everything and when i ran the lg flash tool, i selected the firmware i downloaded, the verizon one, but when i tried to run it, it would say "Device Model is different" "factory model check error" or something like that, it would identify the phone has D850, which is at&t version.
So i went ahead and said **** it, i downloaded that version and went with that, something messed up and it ended with factory reset status 2 instead of 3.
So i had to select BOARD instead of UPGRADE in the flash tool. and it reset everything, booted with att logo and everything, now the only problem is i don't get any signal, at all. Any help?
Click to expand...
Click to collapse
Somewhere in the g3 forums is an unbranded DLL file. It is my understanding from reading about it previously, you need to use that to allow you to flash the proper firmware. The DLL file was made to fix this exact issue from what I read before.
bweN diorD said:
Somewhere in the g3 forums is an unbranded DLL file. It is my understanding from reading about it previously, you need to use that to allow you to flash the proper firmware. The DLL file was made to fix this exact issue from what I read before.
Click to expand...
Click to collapse
Really? any more info on how to find it?
cedric182 said:
Really? any more info on how to find it?
Click to expand...
Click to collapse
I wish I could point you right to it, unfortunately you may have to browse similar help threads to yours until you find it.
I have the exact same problem but mine is seen as a d855 when it is a vs985 if you can find that .dll file please tell me as well! I am going to search for it now
cedric182 said:
So, its been a rough time with this phone. I received it rooted and im really a noob to any of this, its a verizon phone, its labeled outside, and when you remove the battery it says model VS985. But in the settings it says otherwise. I placed an att sim card in it, and it worked fine, i just had some errors on the rom that i have no idea how to fix, it all just seems like a hassle to me, so i decided to unroot it to the best of my ability. I managed to download everything and when i ran the lg flash tool, i selected the firmware i downloaded, the verizon one, but when i tried to run it, it would say "Device Model is different" "factory model check error" or something like that, it would identify the phone has D850, which is at&t version.
So i went ahead and said **** it, i downloaded that version and went with that, something messed up and it ended with factory reset status 2 instead of 3.
So i had to select BOARD instead of UPGRADE in the flash tool. and it reset everything, booted with att logo and everything, now the only problem is i don't get any signal, at all. Any help?
Click to expand...
Click to collapse
If you are 100% sure you do in fact have the Verizon LG G3 (VS985), replace the Verizon DLL file with the Generic LG G3 DLL below. This error is most common if you have changed the Product Name, Product Model, Display ID, and/or Build ID entries in the build.prop
The generic dll file is on autoprime's site. It's named LGUP_8974.dll and can be found here- http://downloads.codefi.re/autoprime/LG/LG_G3 Use that along with the Verizon firmware Instead of the Verizon dll
Hawkswind thank you so much!! that worked for me now i am going to flash back the verizon .dll file
Thank you.
Honestly found it on XDA of all places after looking for it all night
What does 1.16 give us that 1.14 doesn't? Everything honestly. Could not get my Wing recognized to flash with 1.14. No 1.15 Patched exists either
We can downgrade with ChipErase (and restore IMEI), we can modify PDM, we can dump the entire phone (will do tomorrow), can upgrade.
See link here for link: https://forum.xda-developers.com/t/...er-w-fastboot-drivers-and-common_dll.4304181/
This was the only working LGUp_Tool that worked outside of LGUP CMD
I wanted this to try other countries firmware files to see if we get other weird results. This should also allow custom KDZ files? from my understanding
ADDED INFO Nov 8, 2021
How to use LGUp Tool From this Download
1.) Download the LGUp 1.16.03 Patched from the XDA Link above
2.) Run the EXE as admin so it can install Drivers and the software properly
3.) Go to the install directory and run the 2 Bat files that are in the folder as admin
Code:
Default: C:\Program Files(x86)\LG Electronics\LGUp
-- Running LGUP_UI-fixer.bat -- run as admin, follow instructions, run the software when it says to, then close it
-- Run LGUP_UI-Fixer-addon.bat -- run as admin, follow steps, then run LGUp.exe when patch complete
You now have a working LGUP Tool 1.16 Patched for the LG Wing
Explaining the functions of LGUP Tool
Code:
REFURBISH： You will lose all user data（KDZ or TOT）
UPGRADE: Keep data and update your phone（KDZ or TOT) - Select Upgrade to flash kdz firmware to unbrick/restore your phone back to stock.
Chip Erase: Dangerous, This will erase IMEI/efs, do not try this if you do not have a NV backup. - Chip Erase can also remove the Google FRP on many LG devices with Android 5.0, 6.0.
PARTITION DL：Flash the single Partition or selected partitions onto your phone. - This feature can solve “unknown model” issues. This feature can be used to bypass Google FRP by flashing specific tot firmware.
DUMP：Dump all partitions of your phone as backup. - Dump the stock firmware from a working phone as back up and use Partition DL to restore phones.
FOTA Upgrade: This can be used to flash OTA Update file that comes with dot up file extension.
PDM: Change imei, wifi address, bluetooth, mac address
video for how to use LGUP Tool to flash the Wing
Awesome! I just DL'ed.. don't know when I'll have time to mess around with it. Or if I have the skill set to help. But I would definitely try to help out if I can and be excited for rootable firmware.
kaluna00 said:
Awesome! I just DL'ed.. don't know when I'll have time to mess around with it. Or if I have the skill set to help. But I would definitely try to help out if I can and be excited for rootable firmware.
Click to expand...
Click to collapse
I plan on making a video I'll put on the post explaining the tool
KaptinBoxxi said:
I plan on making a video I'll put on the post explaining the tool
Click to expand...
Click to collapse
Holy cow I can’t believe it. You actually found the exact tool that we needed! I went ahead and did a chip erase on my demo model, which had previously been flashed with the Korean firmware from the previous tutorial, and flashed the T-Mobile Firmware. IT WORKED! To get rid of the error at that shows up every time you reboot it, I accessed the hidden menu and changed the TN number to the one associated with TMO_US, as shown in this post.
Thank you!
twocans said:
Holy cow I can’t believe it. You actually found the exact tool that we needed! I went ahead and did a chip erase on my demo model, which had previously been flashed with the Korean firmware from the previous tutorial, and flashed the T-Mobile Firmware. IT WORKED! To get rid of the error at that shows up every time you reboot it, I accessed the hidden menu and changed the TN number to the one associated with TMO_US, as shown in this post.
Thank you!
Click to expand...
Click to collapse
I still can't get mine to accept a sim card and get data but I can make calls/text and use wifi, which is nice.
I wish Partition DL worked, we'd have the boot.img
I flashed Verizon Firmware and put the Verizon NT Code using PDM Mode, still didn't work. Going to try others later
KaptinBoxxi said:
I still can't get mine to accept a sim card and get data but I can make calls/text and use wifi, which is nice.
I wish Partition DL worked, we'd have the boot.img
I flashed Verizon Firmware and put the Verizon NT Code using PDM Mode, still didn't work. Going to try others later
Click to expand...
Click to collapse
Where did you get the Verizon firmware?
kaluna00 said:
Where did you get the Verizon firmware?
Click to expand...
Click to collapse
I found a site that had a "KDZ Downloader" and used that to download it. I can upload it here for those who need it once i redownload it here at work
or you can yourself from this post. Just need the LG URL to the firmware
[LG TOOLS] LG-KDZ-dll-Tool/LGUP_UI-fixer/LG-Kdz-downloader
Please, do not share elsewhere as I want to be able to update if necessary ! LG-KDZ-dll-Tool/KDZ dll extractor (=old version) : this message actually, scroll down a bit... LGUP_UI-fixer LG-Kdz-downloader Share this thread or my blog instead...
forum.xda-developers.com
KaptinBoxxi said:
I still can't get mine to accept a sim card and get data but I can make calls/text and use wifi, which is nice.
I wish Partition DL worked, we'd have the boot.img
I flashed Verizon Firmware and put the Verizon NT Code using PDM Mode, still didn't work. Going to try others later
Click to expand...
Click to collapse
I bought a mint mobile trial sim from amazon and I’m getting calls, text, and 5G data.
twocans said:
I bought a mint mobile trial sim from amazon and I’m getting calls, text, and 5G data.
Click to expand...
Click to collapse
I get calls and text, no cell service at all. I had to manually program in an IMEI. My IMEI comes back as 0 if I just flash it without PDM. IMEI doesn't apply via the service menu either
KaptinBoxxi said:
I get calls and text, no cell service at all. I had to manually program in an IMEI. My IMEI comes back as 0 if I just flash it without PDM. IMEI doesn't apply via the service menu either
Click to expand...
Click to collapse
Interesting. I was able to generate an IMEI in the hidden menu after the chip erase and it worked fine. I did also have to re-add my CSN, because that was also removed, and then my phone did an unprompted factory reset and rebooted.
By the way, when you flashed it, did you use Refurbish? Because with my demo unit, it refused to let me do that and would only allow chip erase. I was reluctant, but it turned out fine. And, the only important thing I was unable to reprogram afterwords was the S/N, but it doesn’t really matter to me. (Too bad the fingerprint scanner still doesn’t work though. That’s the only thing left that still isn’t working after all of this.)
twocans said:
Interesting. I was able to generate an IMEI in the hidden menu after the chip erase and it worked fine. I did also have to re-add my CSN, because that was also removed, and then my phone did an unprompted factory reset and rebooted.
By the way, when you flashed it, did you use Refurbish? Because with my demo unit, it refused to let me do that and would only allow chip erase. I was reluctant, but it turned out fine. And, the only important thing I was unable to reprogram afterwords was the S/N, but it doesn’t really matter to me. (Too bad the fingerprint scanner still doesn’t work though. That’s the only thing left that still isn’t working after all of this.)
Click to expand...
Click to collapse
I plan on testing every function to document what happens, so far I've done Refurbish, Partition DL, Dump, PDM and ChipErase. only Dump didn't work
Nice work fellas!!! Exciting to see some movement towards being able to root/development.
kaluna00 said:
Nice work fellas!!! Exciting to see some movement towards being able to root/development.
Click to expand...
Click to collapse
@KaptinBoxxi
BTW... How do you get to the hidden menu on the Verizon Varient?
kaluna00 said:
@KaptinBoxxi
BTW... How do you get to the hidden menu on the Verizon Varient?
Click to expand...
Click to collapse
I think its the same dial code. I don't have the device in front of me at the moment to say
I tried this earlier...
Post in thread 'LG Wing 5G Network option activation' https://forum.xda-developers.com/t/lg-wing-5g-network-option-activation.4285275/post-85116977
Am I using the wrong dial code for Verizon?
kaluna00 said:
I tried this earlier...
Post in thread 'LG Wing 5G Network option activation' https://forum.xda-developers.com/t/lg-wing-5g-network-option-activation.4285275/post-85116977
Am I using the wrong dial code for Verizon?
Click to expand...
Click to collapse
I have yet to have network work on my demo device regardless of what firmware is on it because my Serial Number and IMEI always come back at 0 and even if I manually enter new ones, it doesn't acivate, although i was able to get to the menu just fine with the standard code in that post.
Interesting, I wonder if there's something different in your firmware or kdz...
looking at the software version. mine is on
F100VM10i
maybe they (Verizon) patched out the hidden menu. your KDZ is labeled
F100VM10d
???
kaluna00 said:
looking at the software version. mine is on
F100VM10i
maybe they (Verizon) patched out the hidden menu. your KDZ is labeled
F100VM10d
???
Click to expand...
Click to collapse
I'm not sure what the final letter signifies, but F100V is verizon, yeah
KaptinBoxxi said:
I'm not sure what the final letter signifies, but F100V is verizon, yeah
Click to expand...
Click to collapse
think that represents the SW iteration identifier between updates... bit of a guess, but i believe that character has changed with updates.