Imate Jamin Stuck - JAMin, XDA Neo, S200 ROM Development

Hi I have looked through all the threads and cannot find any help can some one help I tried to flash my rom and now the imate is stuck on the bootloaders screen ? Red, Green,Blue with IPL 1.00 and SPL 2.13 but it will not connect via USB to recover. I have tried all the steps shown but with no connection its not working. Thanks in advance and I hope someone can help.

taylor99 said:
Hi I have looked through all the threads and cannot find any help can some one help I tried to flash my rom and now the imate is stuck on the bootloaders screen ? Red, Green,Blue with IPL 1.00 and SPL 2.13 but it will not connect via USB to recover. I have tried all the steps shown but with no connection its not working. Thanks in advance and I hope someone can help.
Click to expand...
Click to collapse
1. try my post @ my signature, since your device had not done HARDSPL,
steps are:-
1. choose your favourite nk.nbf (from new rom) and put in the the folder of my tool ( that you had downloaded to your PC),
2. force Prophet into bootloader manually ------> very very important,
3. plug to PC and you should see the " USB" on the Prophet screen,
4. double click "upgrade.bat" from my lazy tool,
5. wait, and follow the on screen instruction,
6. DONE

4. double click "upgrade.bat" from my lazy tool,
Click to expand...
Click to collapse
That won't work as your tool needs an active sync connection!
Please read this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
follow it, and then after that, dioxdas tool will work.

I did my first flash a few days ago, eventually i had the same problem you have, I downloaded the original rom for my phone from an ftp (forgot the link) and it flashed successfully (no other rom was working!) from bootloaders screen then upgraded back to wm6.1 Hope this helps!
I have a small question for the experts, my IPL is 1.00 and SPL is 2.13, does this mean I have a g3 phone?
Good Luck!

mouhahaha said:
... my IPL is 1.00 and SPL is 2.13, does this mean I have a g3 phone?
Click to expand...
Click to collapse
Yes indeed, your device is G3.

Yes, you have a G3 device.

Imate OK now
Thank You guys My Imate is working now , I salute your skills and expertise
Thanks

Related

G4 WM6 BRICKED! please help ASAP!!!!

I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
nstefanelli said:
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
Click to expand...
Click to collapse
Check your PM's
bwesty said:
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
Click to expand...
Click to collapse
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
jUST DO WHAT I SAY
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
samy.3660 said:
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
Click to expand...
Click to collapse
I cannot do that because the Carrier ROMs that I have aren't for G4, so they arent working. I have three different carrier ROMs for my phone.. and none of them work.
-Stefanelli-
nstefanelli said:
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
Click to expand...
Click to collapse
Check your email, I downloaded and zip works fine here.
i'm facing this problem right now , i will solve it with the original rom .
the problem started when i used shelltool to upgrade my G4 CID Locked to windows mobile 6 crossbow underground edition .
i will give it another try when i get my device alive again ,
any suggestions for the WM6 underground to make it work using shelltool on my wiza 200 ??
--------------------- Edit -----------------------
Finally i solved the problem and installed Crossbow WM6 underground edition .
all i did is to install the original rom from provider and then used shelltool to install WM6 .
i want to mention that my wiza200 is G4 and its CID Locked .
Huge thanx to mUn , you are da man
Mmm
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
lobiik said:
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
Click to expand...
Click to collapse
whats your device and is it G3 or G4 ?
try to do as i did and it worked for me , install the provider flash , then try shelltool to flash WM6 underground .
WBR
a-h-t1 said:
whats your device and is it G3 or G4 ?
Click to expand...
Click to collapse
Mine is G4, dunno if cid is locked or not. I've flashed it as I said with wizard love rom and working without problems. I've tried that again this morning, to flash from love rom, but the same. At 96% it hangs, error 302 Communication error, then starts recovery process, phone goes to bootloader mode. Then is possible to flash it with love rom again with no problem
g4
i have a g4 wizard using the shell tool i have chaged my rom on my phone sometimes 3 times a week just to test them out
the shell tool works if you cant download from the forum here is the link for it
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
G4
yes, but when I run shelltool, and press get rom info, all fields states N/A
info from phone is:
ROM Version: 2.26.10.2 WWE
Radio: 2.25.11
ExtROM: 2.26.10.105
IPL/SPL: 2.17.0001
And anyway, dunno exactly which rom for WM6 I can put in (I've just 5.underground_edition_Crossbow_ROM.exe which stucks at 96% with 302 error)
well, I'm dumb, mislooked one stupid thing. Everything passed without errors, Windows Mobile 6 is up and running
happy to know that , the problem was installing rapi ha ??
WBR
No, not really, rapi and that second cab was in device, it was restarted, but I did a mistake - i didn't copied that desired rom into updater directory - that was why were all fields N/A... did that, flashed on first try, without problem
I had the same problem, orginal rom from the provider, and I can reflash it again.....
THX for the info......
ROM verion and link location
Hi lobiik,
which ROM did you use for your device, as you comments above:
"i didn't copied that desired rom into updater directory "
can you please point me to location where i can get the ROM, also proper steps to install the same.
Thanks,
Ajay
HELP!!!!!!!!
I tried flash my G3 with shelltools the program said it worked well i did hard reset then i turned it on it is stuck on 1st front screen bootloader mode is stuck i dont know what is is my device bricked
---------------------edit--------------------------
im a newbie

Prophet not upgraded just tri colour screen

Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
One last thing - i tried to use the update tools again but it says there is no device connected so I did a hard reset and tried again but no go, after a hard reset i can flash the other roms though
cheers all
No Panic !!
andytof47;1862521 said:
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
cheers all
Click to expand...
Click to collapse
No Panic~~~
Pls try to have a look to the link at my signature
( HardSPL easier)
please reply if ok!
I thought The sticky on top of the forum covered this
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
andytof47 said:
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
Click to expand...
Click to collapse
that is good and for experience users, mine is mostly for juniors. Please read and nothing bad.
The jumpspl... 100% work, and follow the steps, never fail.
Will your method work when not booting?
Just read your method and I hope to try it soon, but will your method work if it is not booting --- the method sounds like it needs the system to boot is this correct?
I hope it will work on this system while it is not booting...... I will let you know
OK I just read the whole post -------- The only file I can see is the jump spl.zip --
is that the hard spl or what?
dioxda2 I see how helpfull you are and thanks so far but how do I get the phone out of recovery mode or whatever mode that is??? what is the file I need??? please
thanks heaps

Tried to do wm5 to em6 upgrade,propet boots in bootlader. Need help

I was trying to make upgrade from wm5 to wm6,and was looking in tutorial xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide. First,I found a Upgrade_HardSPL_G4.rar, and did what was said in tutorial,copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,Execute the ROMUpdateUtility_NV_G4 (I have a g4 device) to upgrade hardspl. I got message that my update utility was old and that I need new. Then I restarted device,just run ROMUpdateUtility_NV_G4 from the hardspl folder and instalation went smooth,pda restarted and worked well. Then I went back on xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide,found this sentence: ''Step 3 and 4 are necessary only if the WM6 rom you have downloaded instead of nk.nbf has os.nb file and the ExtROM folder'', and as I downloaded wm61_korand_3_1.rar that contains only nk.nbf file,I put it in Update_Package\Update Utilities,and run ROMUpdateUtility_NV_G4 fron that folder. The instalation finished and pda booted in bootloader. After that I tried flashing Shadow My Edition 2,no DualSIM,and followed the instructions to recover pda from wiki/ prophet recovery(downloaded PDAMobiz_Prophet_WM6_V1.00_Step1),everything was the same,always bootloader. Is there a help for my prophet? Could someone give me a step by step istruction how to bring it to life? Any help is welcome. Thanks
What is the IPL/SPL displayed?
Are you sure your device is a G4?
Try a hard reset.
Try this again: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
IPL 2.58.0001
SPL 2.58.0001
I'm sure that my device is g4. Did a hard reset and it went to bootloader again. Is there a hope? I will try http://wiki.xda-developers.com/index...ophet_recovery, but I noticed that when I run RUU and after verificatio informations on my pda it shows image version :_____________(blank),,then I click update,and then it shows
From:
image version :
To:
image version :
there is no numbers.
If you can enter bootloader, the device is recoverable.
HardSPL???
nikolah said:
I was trying to make upgrade from wm5 to wm6,and was looking in tutorial xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide. First,I found a Upgrade_HardSPL_G4.rar, and did what was said in tutorial,copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,Execute the ROMUpdateUtility_NV_G4 (I have a g4 device) to upgrade hardspl. I got message that my update utility was old and that I need new. Then I restarted device,just run ROMUpdateUtility_NV_G4 from the hardspl folder and instalation went smooth,pda restarted and worked well. Then I went back on xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide,found this sentence: ''Step 3 and 4 are necessary only if the WM6 rom you have downloaded instead of nk.nbf has os.nb file and the ExtROM folder'', and as I downloaded wm61_korand_3_1.rar that contains only nk.nbf file,I put it in Update_Package\Update Utilities,and run ROMUpdateUtility_NV_G4 fron that folder. The instalation finished and pda booted in bootloader. After that I tried flashing Shadow My Edition 2,no DualSIM,and followed the instructions to recover pda from wiki/ prophet recovery(downloaded PDAMobiz_Prophet_WM6_V1.00_Step1),everything was the same,always bootloader. Is there a help for my prophet? Could someone give me a step by step istruction how to bring it to life? Any help is welcome. Thanks
Click to expand...
Click to collapse
would you mind to read me thread?
dioxda2,I read your thread. and I will now try a other hardspl that you linked there. Was that the remark you wanted me to come to my notice?
Same Issue
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
georgexavier said:
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
Click to expand...
Click to collapse
there are sucessful cases , please read my post or.... are you using Vista?
If so, you need other solution. (not with me ... sorry ~~ )
georgexavier said:
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
Click to expand...
Click to collapse
What is the SPL of your device?
When recovering to WM5 you better NOT use the Mobis step 1. Any other step 1 or NVID will be fine. The Mobis ROM is too manipulated for flashing their own WM6 ROM. It will give all kinds of problems when it is used for other purposes.
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
nikolah said:
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
Click to expand...
Click to collapse
see my thread la~~~~
dioxda2,I have read your thread. This is what I know at the moment,and what I think it should be done (correct me if I make any mistake):
-my pda boots in bootloader mode
-it shows on screen IPL:2.58.0001, SPL:2.58.0001
-it's G4 model
-it has no hardspl on it
First one wild shot:
1. Download this jumpspl http://forum.xda-developers.com/showthread.php?t=329147
2.follow the instructions,and instead nk.nbf file from desired rom I put a nk.nbf file found in hardspl rar archive to the SoftSPL folder ,and hopefully flash hrdspl.
3.from bootloader flash any desired wm6 rom with RUU
Second solution:
1.download PVTemp
2.try to flash it from bootloader
3.if it's ok,then on to the next step like on your page one for old method.
Is there something else,diferent way to do this from bootloader?
Thanks for all help
In bootloader, try to flash this: ftp://xda:[email protected]/RUU_Prophet_220734_2207114_024721_NVID.exe
nikolah said:
dioxda2,I have read your thread. This is what I know at the moment,and what I think it should be done (correct me if I make any mistake):
-my pda boots in bootloader mode
-it shows on screen IPL:2.58.0001, SPL:2.58.0001
-it's G4 model
-it has no hardspl on it
First one wild shot:
1. Download this jumpspl http://forum.xda-developers.com/showthread.php?t=329147
2.follow the instructions,and instead nk.nbf file from desired rom I put a nk.nbf file found in hardspl rar archive to the SoftSPL folder ,and hopefully flash hrdspl.
3.from bootloader flash any desired wm6 rom with RUU
Second solution:
1.download PVTemp
2.try to flash it from bootloader
3.if it's ok,then on to the next step like on your page one for old method.
Is there something else,diferent way to do this from bootloader?
Thanks for all help
Click to expand...
Click to collapse
Hi there ~~~~ tell you what~~ ^_^
1. there are 2 ways to upgrade
a. " New " Method.
b. " Old" method.
2. for more update rom flashing.... better have you device hardSPL.
then you can go by 3 means to flash....
1. straight upgrade that is: connect to PC via activesync, activate RUU right ahead ( I don't like this method as sometimes will stuck @ bootloader,
2. copy the 3 files from the jumpspl to the prophet's root directory then activate manually...
3. force bootloader ( by manually buttons combination and not reboot in 3 color hang )...
then 2 and 3 is fine, ( 3 is more convenience though), you should see " USB " at the bottom prophet screen if you did things right. ^_^,
then flash...... ^_^
This is my [size=+2]little handmade tool [/size], a combination tool with Taiwan Cook - YouZii and XDA cook - Korand,
just unzip, execute the " UPGRADE.cmd " , the some on screen clicks, wait and done. !!!
Don't forget to hardSPL before so. OK?
Enjoy ~~~
A Batch flashing tool and Korands clean rom 3.1... Check it out ! ^_^
P.S. Connection Error? Please try again ~~ ^_^
nikolah said:
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
Click to expand...
Click to collapse
You will find it here:
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/

After Rom update? Red/Green/Blue

Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
the problem. You haven't HARDSPL your Device.
Now, go to bootloader mode and flash PDAVIETTemp ,which can be found here.
PDAVIET TEMP
and HARDSPL your Device.
once you HARDSPL your device. SPL information should be 2.G4.4PDA for PPC G4 or 2.G3.4PDA for PPC G3.
Read WIKI. What is SPL. And how to go to bootloader mode.
Thanks
Hello varanusvincent,
So if i'm right my device was not ready jet for WM6? En after your Prophet_Temp i cane load every Rom 6 in it? I'm right?
Tanks
Edit: I have tray your Temp but i won't work. is there another way to hardSPL my device?
For the second time i have load te Rom in the image stay still at 74% cane i break the operation? And how do i get te boot screan back after a abord?
Smattie said:
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
Click to expand...
Click to collapse
You may try
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Smattie said:
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Click to expand...
Click to collapse
1. yes, can still update,
2. FORCE BOOLOADER MANUALLY, (very important )
3. Flash NVID for Prophet
4. after restart and activesync,
5. use my Lazy_tool to flash any rom you like....
Enjoy....
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Smattie said:
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Click to expand...
Click to collapse
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
varanusvincent said:
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
Click to expand...
Click to collapse
Hey smattie,
from the wiki, there is a sentence missing after "To enter bootloader, you need to hold the comm manager button and soft reset."
that is " then release the stylus and keep pressing the comm. button until you see the bootloader screen"
Dear VaranusVincent,
Lazy_Tool is a modified version from Youzii's Chinese version, I had that named "LAZY" because I am ~~~~~~~
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Smattie said:
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Click to expand...
Click to collapse
Don't worry, both way can do.
1. Flash with the tool included in your favorite rom package.
2. or change the nk.nbf in the Lazy_Tool will do ,too.
enjoy~~~
imate jamin boot loader problem
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
josepgreg said:
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
Click to expand...
Click to collapse
READ WORD BY WORD~~~~~
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
HELP
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
josepgreg said:
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
Click to expand...
Click to collapse
He josep,
Have you this whole topic? You must load the bootloader your self. And what this have you trayed?

SIMPLY & COMPLETLY STUCK - plz help can't update to any ROM unless NVID...

Simply stuck and wandering...
Hi there
I am a noob in this area. I am reading the forum for the last days and trying to upgrade my i-mate jamin G3 but i always get stuck...
I started this thread as it involves more than one thread I read, namely
- Windows Mobile 6 Directory For Dummies
- New WM6 Upgrade Guide
- HardSPL guide and files
- Prophet Tools Light: Just the flash! & Prophet Tools: Simplify Flashing--V2.8.3 now up!
- Current upgrade guide for the most ROMs
- LAZYTOOL For all nk.nbf FLASHING + 3 color bootup SOLUTION + (PLEASE READ.........)
- WM 6.5 build 21501 Titanium [ Fixed ] & Fixed CommManager, and other ROMs I tryed...
- ...
so here it goes:
#1# I tryed to run HardSPL an I got an error message like this:
'One or more CON code pages invalid for your given keyboard'
so i guess i didn't work...
#2# then I tryed with ProphetTools and after doing the HardSPL it asks (in jamin) to run JumpSPL I click on yes and then I get white screen (in jamin) I click the flash rom and then I get either:
- error 260 or 274 - connection - this sometimes is worked around and got to 208
or/then
- error 208 - file open (and I did put the nk.nbf rom file in ...\Tools (as said on PTL) and also tryed in ...\Utils\Flash)
#3# While in white screen (achieved with PTL) I also tryed ROM 21501 (with its own RUU) and I get 3 colour screen after supposedly successful upgrade...
#4# also tryed lazyTool but got the same 3 colour screen
#5# With the no vendor NVID_RUU (got from lazy tool thread) I got it back to WM5 and working, pitfully i forgot to dump my original rom so now i am stuck in WM5 in English (i at least had it in Portuguese - my native L)...
I found this comment from dioxda2 in another thread...
Quote:
dioxda2 said:
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and
Click to expand...
Click to collapse
... actually my prophet (jamin) works fine after I flashed the NVID, the problem is that I can't put it to work with any other ROM...
So any of senior experts plz advice
hopefully i am missing some supidly simple solution
#6# Meanwhile if someone knows were do download a original PTG ROM for prophet I would appreciate.
MYG
Jamin G3 unlocked
IPL 2.13
SPL 2.20
NVID
Last edited by MYGene; Today at 06:20 PM.. Reason: confused with dioxda2 comment...
my prophet is G4 so slightly different i would ask you to post detail for the second boot screen
here is mine
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.19.21
wapvirus said:
my prophet is G4 so slightly different i would ask you to post detail for the second boot screen
Click to expand...
Click to collapse
My SPL only shows:
IPL 2.13
SPL 2.20
im a total noob here too but i never encountered the same prob as you have.. i see SPL 2.20 right... so if you want to flash a ROM from here its required that you do HardSPL. i have a G3 device too. you might want to try this... i will try to help as much as i can...
make sure your USB cable/cradle is working perfectly and try to attached it at the back of your PC CPU...
and btw are you using XP or VISTA? coz i use XP...
just RUN HardSPL and let it do its thing... when its done check your SPL again..
marekPLPH said:
im a total noob here too but i never encountered the same prob as you have.. i see SPL 2.20 right... so if you want to flash a ROM from here its required that you do HardSPL. i have a G3 device too. you might want to try this... i will try to help as much as i can...
make sure your USB cable/cradle is working perfectly and try to attached it at the back of your PC CPU...
and btw are you using XP or VISTA? coz i use XP...
just RUN HardSPL and let it do its thing... when its done check your SPL again..
Click to expand...
Click to collapse
I just got another USB cable borrowed and tried the HardSPL you uploaded and it Worked
Actually It gave me the same error message about 'One or more CON code pages invalid for your given keyboard' but this time I didn't got the 3colour screen at the end, instead it restarted normally with SPL 2.G3
I am just waiting battery charge reaches 50% to try flashing it
Many thanks
(I assume either i got a corrupted HardSPL file either a bad USB cable...)
MYGene said:
I just got another USB cable borrowed and tried the HardSPL you uploaded and it Worked
Actually It gave me the same error message about 'One or more CON code pages invalid for your given keyboard' but this time I didn't got the 3colour screen at the end, instead it restarted normally with SPL 2.G3
I am just waiting battery charge reaches 50% to try flashing it
Many thanks
(I assume either i got a corrupted HardSPL file either a bad USB cable...)
Click to expand...
Click to collapse
Good to hear this...
Happy Flashing!!!
MYGene said:
I just got another USB cable borrowed and tried the HardSPL you uploaded and it Worked
Actually It gave me the same error message about 'One or more CON code pages invalid for your given keyboard' but this time I didn't got the 3colour screen at the end, instead it restarted normally with SPL 2.G3
I am just waiting battery charge reaches 50% to try flashing it
Many thanks
(I assume either i got a corrupted HardSPL file either a bad USB cable...)
Click to expand...
Click to collapse
That,s great news and happy flashing

Categories

Resources