Where can we get radio 3.39.10 ?
http://rapidshare.com/files/113794877/radio339.rar
Thank you very much!
There's a mirror here as well:
http://www.geek-pages.com/rom/radio339.rar
Thanks again!
Can I flash this using an empty RUU? or do I have to use the SD card flashing method?
Stick with the SD card method to flash since with recent radio ROMs the RUU method tends to lock-up (or an extremely long pause...) at around 9%. Maybe RUU does work just fine with this radio, but until someone tries we won't know. If you do have a suitable SDcard then flashing via that is always the easiest and most reliable.
ok. thanks for your response
Flashing via RUU doesn't work for me -- RUU quits with "Invalid Command" at 8%.
partnerinflight said:
Flashing via RUU doesn't work for me -- RUU quits with "Invalid Command" at 8%.
Click to expand...
Click to collapse
It's good to know that for us, thanks for your report.
No probs for me with the SD card method.
Any problems for Sprint users?
rleejr79 said:
No probs for me with the SD card method.
Click to expand...
Click to collapse
I also used the SD card method with no problems also.
I flashed late this afternoon. Now I am waiting to see if this messes up my bluetooth or anything else. The 3.37 radio was great for 2 days then I had all the same problems talked about in the thread for that radio. If there is a problem I'll go back to 3.35
Used the micro SD method, no problems.
Now running the radio 3.39.10
flash the radio ROM using micro SD
flash the radio ROM using micro SD
enter bootloader: power + camera + reset button
* You must use a non-SDHC (ie. 2GB or less) microSD card formatted in FAT32 with a cluster size of 4kb or less to flash the radio ROM
* Standard SD flashing routine of renaming the RAM TITAIMG.nbh and placing it into the root of the card
* There will be 5 pauses at ~14 seconds during the flash
I don't have a micro sd card that meets the criteria is there a updater that works out there?
mdjkim said:
Used the micro SD method, no problems.
Now running the radio 3.39.10
flash the radio ROM using micro SD
flash the radio ROM using micro SD
enter bootloader: power + camera + reset button
* You must use a non-SDHC (ie. 2GB or less) microSD card formatted in FAT32 with a cluster size of 4kb or less to flash the radio ROM
* Standard SD flashing routine of renaming the RAM TITAIMG.nbh and placing it into the root of the card
* There will be 5 pauses at ~14 seconds during the flash
Click to expand...
Click to collapse
I used Fat32 with a cluster setting of 1024 bytes... maybe the cluster size isn't significant?
1024 bytes < 4kb
i'm curious if any Alltel users have tried out Radio 3.39. We have Radio 3.37.20 that seems to be working well, but wondered if anyone has tried 3.39.
mdjkim said:
Used the micro SD method, no problems.
Now running the radio 3.39.10
flash the radio ROM using micro SD
flash the radio ROM using micro SD
enter bootloader: power + camera + reset button
* You must use a non-SDHC (ie. 2GB or less) microSD card formatted in FAT32 with a cluster size of 4kb or less to flash the radio ROM
* Standard SD flashing routine of renaming the RAM TITAIMG.nbh and placing it into the root of the card
* There will be 5 pauses at ~14 seconds during the flash
Click to expand...
Click to collapse
iam confused how do i flash this rom again? its been a few months since ive messed around with this phone and i forgot. i am runnin dcd new rom and have 3.27 radio installed right now. how do i flash my titan using the sd card?
Use Sprint ROM To Instal New Radio
mr.ellsworth said:
I don't have a micro sd card that meets the criteria is there a updater that works out there?
Click to expand...
Click to collapse
I don't have one either, have a 4GB SDHC. Here is a link to a sprint rom:
http://forum.ppcgeeks.com/showthread.php?t=26119
You can install this ROM to get the newest radio.
After your phone has rebooted put it into Boot loader Mode: Camera+Power and Soft Reset.
Proceed to load any ROM that you like. Remember this ROM will overwrite any Boot splashes you have so you will have to replace them. I find that the PPCKitchen is the easiest.
what are the benefits of using the radio over the latest one alltel just came out with?
what are the benefits of using the radio over the latest one alltel just came out with?
Click to expand...
Click to collapse
Read pages 2 and 3 of this thread for my explanation. http://forum.xda-developers.com/showthread.php?t=392133
thank you very mcuh
Related
ok, before the flaming begins, I'm a noob and should have never even messed with this thing. ok, there, I said it.
alright, a month or two back, I upgraded my 6800 to the nochem 5054 rom. phone worked awesome, no problem.
I'm selling the device and need to flash back to the stock verizon rom. the only place I saw a link to the stock rom, the ftp was down so I couldn't download it.
so I found this thread http://forum.xda-developers.com/showthread.php?t=350539&page=1 and figured it sounded like a good substitute. I downloaded the exe and it installed. finished flashing and said that it was successful. only one little problem (and I've searched for an hour and haven't found the answer...)
it won't boot. it just sits at the HTC TITAN boot graphic. not the tricolor loader. I hard reset but still no fix. once I reset the phone it displays the cresent graphic with HTC TITAN at the bottom, then the little red parameters come up and this is what they say:
M09
H3B60B3FA
P DCAAXAM-4350
R 3.35.04
D 2.17
so, the phone won't boot and I can't get it to connect with activesync to try and reload that rom.
damn. What now?
You have a non GPS rom with the 3.35.04 radio, which is incompatible.
awesome. now I know the problem, I just need a solution.
and do you have any idea where to find a STOCK vzw rom? I guess I need a radio too.
someone please <sniffle>
Go to www.ppcgeeks.com There is a Verizon stock rom on the FTP site....find by clicking QLinks tab at top of page. Go to Titan folder and inside you'll find 'Carrier ROMs'...there is a Verizon ROM inside. Uploaded in March of this year...I don't know what version...I'm on Alltel. Hope this helps.
will I be able to execute that without my pda having an activesync connection though?
yeah, I just finished downloading the stock rom (THANKS) but I can't get the pda to sync up. I guess because it won't boot, it won't connect to my PC either.
what bootloader do you have installed?
gcincotta said:
what bootloader do you have installed?
Click to expand...
Click to collapse
how do I find out? I originally got buildos from ppcgeeks and I chose the 5054 option. I used some unlocker first, then I used buildOS and flashed the device.
is the bootloader in any of those parameters I put above?
Hold power, camera, and soft reset using the stylus while holding them, should put the phone into the bootloader.
It should say at the top:
TITA100 MFG
SPL xxxxxxxxxx
CPLD-9
Tell me what it says where the xxxxxxxx is.
SPL-2.40.Olipro
THANK YOU SO MUCH
I have downloaded the titan relocker and also the correct stock rom from the titan wiki area, the 78MB on. I believe that has the radio too.
geez, I should have never messed with this thing, I don't even know what a radio is....
Ok this is what you need to do. Since you have the 3.35.04 radio and 2.40 bootloader you need to flash a 3.x.x GPS rom in order to be able to boot again. Unfortunately because you can't boot and establish a usb connection, the only way out of this mess is to flash with a microsd card that's less than 2gb. If you don't have one, get one. You'll also need a card reader as well so you can format it correctly.
1. Download this file It's a clean verizon 3.x.x rom and will allow you to boot again.
2. Format your microsd card using a card reader in windows as FAT32 using a cluster size less than 4 Kb.
3. Place the file you downloaded on the card.
4. Insert the card in your phone and enter the bootloader again.
5. The bootloader will say "Checking" then will prompt you to press the power button to begin the update. Press the power button.
6. When it's done, soft reset with the stylus and the phone SHOULD boot into windows mobile allowing you to get an activesync connection.
Now all you have to do is relock your phone using titan_relocker (follow instructions carefully and exact), then flash the stock rom and radio. Make SURE you relock though, and make sure you use the correct rom and radio this time.
ooops .... GC has you all lined up .....
az
well, rather than buy a card and reader, I thought I could shortcut by borrowing a card from someone, then I used my wife's 6800 to format it with pocket mechanic. I chose fat32 and 2K cluster size.
copied the file from my laptop to my wife's 6800 which had the card in it. popped it in my phone and went into the loader but it just says serial.
Is it necessary to have a card reader and format through windows? if it is, I will go buy one and do it that way. my buddies card is only 64MB but that's ok because the file is only 45MB.
let me know about the reader so I know if I need to run to the best buy real quick. wow, making progress.
Yeah you can't format the card using the phone. You also can't copy the file to it using the phone. Go buy a cheap one. You don't even need a card reader, you could use one of those sd to usb dongles and it would work fine. (If you choose to go this route, just make sure the card you buy comes with an sd to microsd adapter). Just can't do it using the phone.
ok, I got a 1gb card with the standard SD adapter.
I went to format it in my laptop and I used fat32 but it didn't give me a cluster option. it just said default allocation size and It was not able to be changed.
anyhow, formatted and copied the .nbh file over and turned on but it just says serial and does not look like it was reading from the card...
moveright said:
ok, I got a 1gb card with the standard SD adapter.
I went to format it in my laptop and I used fat32 but it didn't give me a cluster option. it just said default allocation size and It was not able to be changed.
anyhow, formatted and copied the .nbh file over and turned on but it just says serial and does not look like it was reading from the card...
Click to expand...
Click to collapse
Go to the XDA-Wiki at the top of the page and click on it. You'll see all the HTC models...scroll down until you see the Titan model...click on it. Scroll about halfway down the page to the section titiled 'Tutorials'...you'll see a topic called 'Getting started with your Titan'...click on it. This will have a section on flashing via SD card. It explains how to format the card in DOS. For some reason many times when formatting thru windows stuff doesn't work...I have no idea why...but when you format thru DOS its almost failsafe. Good luck....make sure its in the root directory of your card and labeled TITAIMG.nbh
moveright said:
ok, I got a 1gb card with the standard SD adapter.
I went to format it in my laptop and I used fat32 but it didn't give me a cluster option. it just said default allocation size and It was not able to be changed.
anyhow, formatted and copied the .nbh file over and turned on but it just says serial and does not look like it was reading from the card...
Click to expand...
Click to collapse
Flashing a phone with a micro SD card
1. Format a microSD card into FAT32 with an allocation unit/cluster size of 1024
(the default size for a 1 GB would not work, also if it takes only a few seconds to format
try formating with some other slot/device. A 1 GB took over a minute to format correctly)
To format your Card - Open a DOS box and type/copy and paste this: ( format ?: /FS:FAT32 /A:1024 )
Replace the ? with whatever your SD cards drive letter is... ie: f, h, I.... Mine is G....
2. Copy the ROM to flash (xxxxxxxx.nbh) to the root of the microSD
3. Rename the ROM xxxxxxx.nbh to TITAIMG.nbh
4. Insert your card.
5. Force into the boot loader with POWER-CAMERA-RESET
6. Follow the instructions and you'll quickly flash your Titan...
That was in the Titan Wiki - You can use a DOS box to format, do not use Windowz Explorer....
Is there a way to flash the Raphael without Windows, just by booting it into SPL and inserting a microSD with an image on it?
Why I'm asking? What, if a new ROM bricks the device in such way, that ActiveSync will no longer connect to it? RaphaelCustomRUU.exe will not work anymore.
If you have HardSPL you can flash from the SD card. I have flashed 6-7 custom roms on my TP and I haven't used the custom RUU for any of them.
knight14th said:
Is there a way to flash the Raphael without Windows, just by booting it into SPL and inserting a microSD with an image on it?
Why I'm asking? What, if a new ROM bricks the device in such way, that ActiveSync will no longer connect to it? RaphaelCustomRUU.exe will not work anymore.
Click to expand...
Click to collapse
I had this problem with ROMeOS v1.04, activesync just did not connect and no programs started, rebooting did not help. I already thought my phone to be brick!
Just press volume down and powerbutton to turn it on (should be off before of course) and you will end in the bootloader, flashing with RaphaelCustomRUU.exe works if the phone is on in bootloader mode and connected to computer. (thank god!)
XL3N7 said:
If you have HardSPL you can flash from the SD card. I have flashed 6-7 custom roms on my TP and I haven't used the custom RUU for any of them.
Click to expand...
Click to collapse
Instructions would be nice if provided also....
I guess im the only one who cannot flash a ROMeOS rom from a SD-Card.
I've tried everything formatted the card to FAT32 renamed the .nbh to RAPHIMG.NBH tried caps and non caps. I even tried to format to regular FAT but still no go.
As you can see in my signature i have flashed Hard-SPL 1.90.OliNex
Mine are called RAPHIMG.nbh and they have to be in the root map of your SD, I do this with al the new ROM flashes, because I believe it's faster and you don't have the battery limit (which is there for good reason of course). So root map and there you won't see .nbh in the root map, just RAPHIMG. hope this helps
12aon said:
Mine are called RAPHIMG.nbh and they have to be in the root map of your SD, I do this with al the new ROM flashes, because I believe it's faster and you don't have the battery limit (which is there for good reason of course). So root map and there you won't see .nbh in the root map, just RAPHIMG. hope this helps
Click to expand...
Click to collapse
What do you mean with in root map you won't see .nbh? Do i have do delete the extension if so then that has never been clear for me
WatskeBart said:
What do you mean with in root map you won't see .nbh? Do i have do delete the extension if so then that has never been clear for me
Click to expand...
Click to collapse
You need the nbh file extension. It just won't show if you have "Show File Extensions" turned off. If you use FileExplorer on PPC, you'll see RAPHIMG not RAPHIMG.nbh. (Check the file name in Windows or TotalCommander to be sure).
The file must be on the root of you SD Card and it should work, unless the OliNex HardSPL has some extra options / checks.
Ta
Dave
DaveShaw said:
You need the nbh file extension. It just won't show if you have "Show File Extensions" turned off. If you use FileExplorer on PPC, you'll see RAPHIMG not RAPHIMG.nbh. (Check the file name in Windows or TotalCommander to be sure).
The file must be on the root of you SD Card and it should work, unless the OliNex HardSPL has some extra options / checks.
Ta
Dave
Click to expand...
Click to collapse
I already thought he meant the hide extensions thing but just to be sure
I've tried RAPHIMG.nbh but it doesn't work for my device.
I also own a Hermes and just flashed it the SD-Card way with HERMIMG.nbh and that device works perfectly, so it isn't a card problem.
Could it be an Hard-SPL thing then?
WatskeBart said:
I already thought he meant the hide extensions thing but just to be sure
I've tried RAPHIMG.nbh but it doesn't work for my device.
I also own a Hermes and just flashed it the SD-Card way with HERMIMG.nbh and that device works perfectly, so it isn't a card problem.
Could it be an Hard-SPL thing then?
Click to expand...
Click to collapse
I've spoken with cmonex about this and there's no reason it shouldn't flash from the SD card. The code is in Olinex 1.90 to do it.
RAPHIMG.NBH on a FAT32 Formated Card and hey presto
Ta
Dave
I just tried it and it works. The file is named 'RAPHIMG.nbh' on the root of my storage card. Booted into bootloader mode and it instantly loads the nbh file.
Nice to know. So finally I do not have to boot Windows any more
I tried this for the first time just now, hadnt even thought to use the sd card, I usuallly go through all the hassle of using a vm just to flash.
File is named RAPHIMG.nbh on the root of the sd, restart holding vol- and thats it.
dabs said:
I tried this for the first time just now, hadnt even thought to use the sd card, I usuallly go through all the hassle of using a vm just to flash.
File is named RAPHIMG.nbh on the root of the sd, restart holding vol- and thats it.
Click to expand...
Click to collapse
Could it depend on which ROM you flash? Because honestly i only tried to flash ROMeOS with SD-Card. I never tried to flash DCS or something else.
So many people with successful flashes with the SD so i'm almost sure i'm doing something wrong here.
I will try again a soon as a newer ROM comes out because i'm a bit tired flashing different ROMs
Thanks for all the support.
I was using ROMeOS v1.10. sd card is a sandisk 6gb. Its hard to see what could prevent it from working for you, hopefully something will turn up.
Ishould also note it is considerably faster flashing from sd than over usb.
Put your miniSD in a card reader and from Windows, right click it and select format. Choose fat32 and leave the volume label blank. If it automatically adds a name delete it before proceeding with the format. After it's formatted, place your RAPHIMG.nbh on the rott of the card. Enter bootloader by holding volume down and pressing reset and it will find the image file. From there follow the on screen instructions and it will be done in a few minutes.
S ¤ F ¤ W
dabs said:
.../... I should also note it is considerably faster flashing from sd than over usb. .../.
Click to expand...
Click to collapse
It is indeed. It is:
1. Safer [Risk free if you ensure you have at least 50% of battery left.]
2. Faster [Way much faster.]
3. Windowsless [that's a blessing!]
Good luck.
Cheers.
I had problems too flashing hang.tuah's rom but only 1.05 it would flash but not boot up, i tried through 2 pcs and via flash card.
i couldn't flash by my actual card cause from what I read sdhc isn't necessarily supported in bootloader, so i borrowed a friends 2gb microsd and that worked with flashing.
Since there is a new version of ROMeOS i'm gonna try it again.
I'm going nuts over here
I renamed the ruu_signed.nbh to RAPHIMG.nbh and copied it to the root of a FAT32 formatted SanDisk 2GB Ultra II card (non-SDHC) and check it for errors.
When i insert the card and reset while pressing the volume down button to enter the bootloader, the device says "No Image File Found" and just stays in the bootloader
What am i doing wrong here??? It's no that a big deal because i can flash using the wrapper but it should also flash with the SD-Card.
I'm almost giving up here
If there are any more idea's bring em up
I copy the nueSPL 2.47 exe over to a 1 gig SD card. Run it and I get the msg that the card isn't formatted. I elect to have the program format for me and get a partition error.
I know that this just puts the TITAIMG.nbh file on the card so it will load in bootloader mode.
I've tried all I know and searched many threads looking for a solution. Perhaps it's the Kingston card I have but does anyone else have a suggestion, or if someone has the TITAIMG.nbh file already if they could post it up I would be most grateful.
I have Olipro 2.40 / 3.42.50 and dcd 3.2.6.
Thanks in advance..
Not sure if this is the problem, but I thought that the instructions said to copy the file to the phone's memory and run it from there.
Thanks for reply - I tried that no matter how I run it it won't format the card same error every time.
mc6800 said:
Thanks for reply - I tried that no matter how I run it it won't format the card same error every time.
Click to expand...
Click to collapse
No it gets copied to the storage card and ran from there.....not all cards work though.....do you have a card reader on your PC?......if so format it through the PC.....otherwise I suggest getting another card...or if you have it use the card that came with the phone....
flyers2114 said:
No it gets copied to the storage card and ran from there.....not all cards work though.....do you have a card reader on your PC?......if so format it through the PC.....otherwise I suggest getting another card...or if you have it use the card that came with the phone....
Click to expand...
Click to collapse
Ahhh it's VZW they don't give you a card with the phone. Must be the card the only other card I have is a 4 gig SDHC. I was hoping someone would have the TITAIMG.nbh for it.
I know there must be another way to format your card from the pda. I was just about to check on freewareppc, when I remembered that I have no2chem's nuemassstorage installed on my device. it turns my pda/phone into a card reader. I actually formatted an sdcard the other day, cause I wanted to update the radio. check it out:
studentjunk said:
I know there must be another way to format your card from the pda. I was just about to check on freewareppc, when I remembered that I have no2chem's nuemassstorage installed on my device. it turns my pda/phone into a card reader. I actually formatted an sdcard the other day, cause I wanted to update the radio. check it out:
Click to expand...
Click to collapse
hey thanks for the tip! I'll try it out and see if I can get to nueSPL 2.47
what radio do you guys recommend to use right now. I AM running at this time rom 1.3.4 radio 3.42.40, and should I be changing my bootloader it's SPL-2.40.Olipro SPLD-9 my HD died on me so i have to restart all over now also, would some one point me to the links on how to do it ( i lost so much info.... ) i would like to try using 6.5 beta... please let me know i have VZW 6800
The 3.42.40 radio is for GPS ROMs so you should be good to go. I recently upgraded to the 3.42.50 radio and it is working great.
demonlordoftheround said:
The 3.42.40 radio is for GPS ROMs so you should be good to go. I recently upgraded to the 3.42.50 radio and it is working great.
Click to expand...
Click to collapse
YEAH....but should i go to .50? or .40 is just as good>?
I say give the .50 a try. I came from .02 so the .50 was a big difference for me.
demonlordoftheround said:
I say give the .50 a try. I came from .02 so the .50 was a big difference for me.
Click to expand...
Click to collapse
thanks demonlordoftheround ... can you give a link on how to.... as i posted on top i lost all my info with my HD
fandi1 said:
thanks demonlordoftheround ... can you give a link on how to.... as i posted on top i lost all my info with my HD
Click to expand...
Click to collapse
Here is the XDA Wiki for GPS ROM upgrading: http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome I used nueSPL2.47 to unlock. Get PocketRAR if you don't already have it. Unzip to a 1 GB or less microSD card formatted to FAT32. nueSPL2.47 will check for all this. Just follow the instructions on screen.
nice!!!
thank you
hmmm
i'm getting "this Update Utility cannot be used for your PDA phone please check your update utility
what's that all about> HELP please
see sig and all is good
TeleFragger said:
see sig and all is good
Click to expand...
Click to collapse
sorry telefragger!!! what do you mean by that?
Your device is already unlocked? Just flash the radio.
im having trouble flasshing my radio too. When i try it sd card way it says no image flle, and when i try usb way i get error 328 invalid commad, the update utility cannot be used with your PDA. i have a sprtin titan/ mogul im trying to update to radio 3.42.50. ive flashed custom roms with no problem what so ever.
Did you unzip the .rar file to the card?
The card needs to be FAT32 and 1GB or less.
Manually put the device into bootloader and follow any onscreen prompts.
demonlordoftheround said:
The card needs to be FAT32 and less than 1GB.
Click to expand...
Click to collapse
The card can be a 2GB.
Learn something new every day!
demonlordoftheround said:
Did you unzip the .rar file to the card?
The card needs to be FAT32 and 1GB or less.
Manually put the device into bootloader and follow any onscreen prompts.
Click to expand...
Click to collapse
I did unzip the file to the card. I have a 512mb and a 2GB card neither one works. I assume the cards r fat 32 both windows and mogul can read them.
how would i go about formatting them. I dont have a card reader in my PC.
jmartin72 said:
I did unzip the file to the card. I have a 512mb and a 2GB card neither one works. I assume the cards r fat 32 both windows and mogul can read them.
how would i go about formatting them. I dont have a card reader in my PC.
Click to expand...
Click to collapse
Use HardSPL2.47, go thru the first few steps and it will check the format of the card, and if it's not correct it will prompt to format the card for you. So run it and if you get the screen showing that the card is fine, go ahead and exit at that point.
If it says the card is the wrong format, it will have an option to format the card. Let it format, then exit.
Also, make sure you have everything on the card backed up before it formats.
BTC
Also I believe I read somewhere than .40 is newer, or at least it was available to us after .50 came out based on which carrier released it.
I've been using .40 for close to a year and have never had any issues, GPS works great, battery lasts more than 24 hours, etc. So I know it's definitely a good radio, can't say the same for .50 as I only tested it for a few days. During that period of time I had no issues.
BTC
finally got it to work. had to use my printer that has a card reader bult into it to format the card to fat32. flashed my radio, and now rocking .50 radio TY everyone for your help.
I flashed a stock rom
_HTC HD2_RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and now I check my bootloader and it says
spl-2.08 cotullahspl
so what's wrong?
I saw around the forum that hspl is erased after stock flash?
whats wrong?
hspl is only erased if you restore an official rom from your microSD card.
This is noted in 4) in the HSPL thread.
dtechnology said:
hspl is only erased if you restore an official rom from your microSD card.
Click to expand...
Click to collapse
so how do I do that?
can it be done with my 8GB / 1GB sd?
what files do I import to my sd and how do I flash it?
You should really put a little more effort in searching yourself than just asking questions. If you read the HSPL thread it is all noted there and this question has been asked 1,000,000.48 times already.
okay, thanks anyways for the answer, I will check into it
Check this
Run HSPL3_PKG.exe and select SPL 1.66.0000 or a different Version with 0000 at the end.
HectiQ said:
so how do I do that?
can it be done with my 8GB / 1GB sd?
what files do I import to my sd and how do I flash it?
Click to expand...
Click to collapse
No sir, Don't use a 8GB SD-card to flashing Stock ROM!
Maximum 2GB is recommended.
Steps:
- Right klick on the HTC HD2_RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30. 50.07U_2.06.51.07_Ship select Extract (Winzip/Zip7/...)
- Copy the "RUU_signed.nbh" to SD card
- Rename the "RUU_signed.nbh" to "leoimg.nbh"
- Reset the device while pressing the volume down button.
- Follow the steps on your device.
Why wouldn't you be able to use a 8GB card? The only card I have is 8GB and I've used it 2 times to restore stock rom and it has gone perfectly...
[edit]
I just tried it again it at least works perfectly for me:
1. Format SD card through windows (FAT32)
2. place leoimg.nbh of official rom on it
3. Hold voldown and power to enter bootloader screen and press power to flash
It dit restart once about 20% through with a big exclimation mark, but restarted immidiatly and completed the flashing.
This has happened once before when I had HSPL'ed my device and restored it this way.
[/edit]
dtechnology said:
Why wouldn't you be able to use a 8GB card? The only card I have is 8GB and I've used it 2 times to restore stock rom and it has gone perfectly...
Click to expand...
Click to collapse
The reason way I mentioned (don't use a 8GB SD-card) is based on the feedback of users.
Flash stock ROM over a 8GB SD_cards don't work in almost 70% of the cases. so to prevent (lot of troubles) We mention to use preferable a 2GB or a 4GB SD (the latest who works in 85% of the cases)
ok guys, thanks for the feedback
+1 thanks for everyone