ok, before the flaming begins, I'm a noob and should have never even messed with this thing. ok, there, I said it.
alright, a month or two back, I upgraded my 6800 to the nochem 5054 rom. phone worked awesome, no problem.
I'm selling the device and need to flash back to the stock verizon rom. the only place I saw a link to the stock rom, the ftp was down so I couldn't download it.
so I found this thread http://forum.xda-developers.com/showthread.php?t=350539&page=1 and figured it sounded like a good substitute. I downloaded the exe and it installed. finished flashing and said that it was successful. only one little problem (and I've searched for an hour and haven't found the answer...)
it won't boot. it just sits at the HTC TITAN boot graphic. not the tricolor loader. I hard reset but still no fix. once I reset the phone it displays the cresent graphic with HTC TITAN at the bottom, then the little red parameters come up and this is what they say:
M09
H3B60B3FA
P DCAAXAM-4350
R 3.35.04
D 2.17
so, the phone won't boot and I can't get it to connect with activesync to try and reload that rom.
damn. What now?
You have a non GPS rom with the 3.35.04 radio, which is incompatible.
awesome. now I know the problem, I just need a solution.
and do you have any idea where to find a STOCK vzw rom? I guess I need a radio too.
someone please <sniffle>
Go to www.ppcgeeks.com There is a Verizon stock rom on the FTP site....find by clicking QLinks tab at top of page. Go to Titan folder and inside you'll find 'Carrier ROMs'...there is a Verizon ROM inside. Uploaded in March of this year...I don't know what version...I'm on Alltel. Hope this helps.
will I be able to execute that without my pda having an activesync connection though?
yeah, I just finished downloading the stock rom (THANKS) but I can't get the pda to sync up. I guess because it won't boot, it won't connect to my PC either.
what bootloader do you have installed?
gcincotta said:
what bootloader do you have installed?
Click to expand...
Click to collapse
how do I find out? I originally got buildos from ppcgeeks and I chose the 5054 option. I used some unlocker first, then I used buildOS and flashed the device.
is the bootloader in any of those parameters I put above?
Hold power, camera, and soft reset using the stylus while holding them, should put the phone into the bootloader.
It should say at the top:
TITA100 MFG
SPL xxxxxxxxxx
CPLD-9
Tell me what it says where the xxxxxxxx is.
SPL-2.40.Olipro
THANK YOU SO MUCH
I have downloaded the titan relocker and also the correct stock rom from the titan wiki area, the 78MB on. I believe that has the radio too.
geez, I should have never messed with this thing, I don't even know what a radio is....
Ok this is what you need to do. Since you have the 3.35.04 radio and 2.40 bootloader you need to flash a 3.x.x GPS rom in order to be able to boot again. Unfortunately because you can't boot and establish a usb connection, the only way out of this mess is to flash with a microsd card that's less than 2gb. If you don't have one, get one. You'll also need a card reader as well so you can format it correctly.
1. Download this file It's a clean verizon 3.x.x rom and will allow you to boot again.
2. Format your microsd card using a card reader in windows as FAT32 using a cluster size less than 4 Kb.
3. Place the file you downloaded on the card.
4. Insert the card in your phone and enter the bootloader again.
5. The bootloader will say "Checking" then will prompt you to press the power button to begin the update. Press the power button.
6. When it's done, soft reset with the stylus and the phone SHOULD boot into windows mobile allowing you to get an activesync connection.
Now all you have to do is relock your phone using titan_relocker (follow instructions carefully and exact), then flash the stock rom and radio. Make SURE you relock though, and make sure you use the correct rom and radio this time.
ooops .... GC has you all lined up .....
az
well, rather than buy a card and reader, I thought I could shortcut by borrowing a card from someone, then I used my wife's 6800 to format it with pocket mechanic. I chose fat32 and 2K cluster size.
copied the file from my laptop to my wife's 6800 which had the card in it. popped it in my phone and went into the loader but it just says serial.
Is it necessary to have a card reader and format through windows? if it is, I will go buy one and do it that way. my buddies card is only 64MB but that's ok because the file is only 45MB.
let me know about the reader so I know if I need to run to the best buy real quick. wow, making progress.
Yeah you can't format the card using the phone. You also can't copy the file to it using the phone. Go buy a cheap one. You don't even need a card reader, you could use one of those sd to usb dongles and it would work fine. (If you choose to go this route, just make sure the card you buy comes with an sd to microsd adapter). Just can't do it using the phone.
ok, I got a 1gb card with the standard SD adapter.
I went to format it in my laptop and I used fat32 but it didn't give me a cluster option. it just said default allocation size and It was not able to be changed.
anyhow, formatted and copied the .nbh file over and turned on but it just says serial and does not look like it was reading from the card...
moveright said:
ok, I got a 1gb card with the standard SD adapter.
I went to format it in my laptop and I used fat32 but it didn't give me a cluster option. it just said default allocation size and It was not able to be changed.
anyhow, formatted and copied the .nbh file over and turned on but it just says serial and does not look like it was reading from the card...
Click to expand...
Click to collapse
Go to the XDA-Wiki at the top of the page and click on it. You'll see all the HTC models...scroll down until you see the Titan model...click on it. Scroll about halfway down the page to the section titiled 'Tutorials'...you'll see a topic called 'Getting started with your Titan'...click on it. This will have a section on flashing via SD card. It explains how to format the card in DOS. For some reason many times when formatting thru windows stuff doesn't work...I have no idea why...but when you format thru DOS its almost failsafe. Good luck....make sure its in the root directory of your card and labeled TITAIMG.nbh
moveright said:
ok, I got a 1gb card with the standard SD adapter.
I went to format it in my laptop and I used fat32 but it didn't give me a cluster option. it just said default allocation size and It was not able to be changed.
anyhow, formatted and copied the .nbh file over and turned on but it just says serial and does not look like it was reading from the card...
Click to expand...
Click to collapse
Flashing a phone with a micro SD card
1. Format a microSD card into FAT32 with an allocation unit/cluster size of 1024
(the default size for a 1 GB would not work, also if it takes only a few seconds to format
try formating with some other slot/device. A 1 GB took over a minute to format correctly)
To format your Card - Open a DOS box and type/copy and paste this: ( format ?: /FS:FAT32 /A:1024 )
Replace the ? with whatever your SD cards drive letter is... ie: f, h, I.... Mine is G....
2. Copy the ROM to flash (xxxxxxxx.nbh) to the root of the microSD
3. Rename the ROM xxxxxxx.nbh to TITAIMG.nbh
4. Insert your card.
5. Force into the boot loader with POWER-CAMERA-RESET
6. Follow the instructions and you'll quickly flash your Titan...
That was in the Titan Wiki - You can use a DOS box to format, do not use Windowz Explorer....
Related
Yes, I did a search and google but still can't find a clear answer. I have just bought a 8525 with ATT and want to start loading those cool WM6 rom's I see all over the site. Problem is I have a Mac and can't figure out how to make it all happen. I use Missingsync and can load cab files with no prob but even trying to load Hard-SPL-V7 is not workning for me. I mean, I can get it on the phone but can't make it open or do anything else. I have checked all the great "how to" files but none seem to address this Mac situation. Any help in pointing me in the right direction would be MOST appriciated.
Thanks in advance;
Stephan Howard-Cooper
You'll have to use a virtual environment via Parallels or VMWare Fusion. Or get Boot Camp up and running and reboot into Windows.
Finally, you can also do the SD Card method for OS upgrade detailed in the Wiki.
I've done all methods except for Boot Camp without issue.
Hi
Pof's HERMflasher seems to work with Intel MACs too.
http://forum.xda-developers.com/showthread.php?t=296436&highlight=hermflasher
Thanks for the reply guys. I have tried the SD method but must be doing something wrong. I renamed the nbh file and then put all the extracted files onto the card. When I attempt to bootload I get to the tricolor screen but nothing else.?????
luria said:
Thanks for the reply guys. I have tried the SD method but must be doing something wrong. I renamed the nbh file and then put all the extracted files onto the card. When I attempt to bootload I get to the tricolor screen but nothing else.?????
Click to expand...
Click to collapse
First, you need to have HardSPLv7 installed. A.f.a.i.k. this does not work with unmodified bootloaders.
Next, you need to make sure that your MicroSD card is formatted using FAT32. The FAT32 cluster size also matters (for my 2gig card, 8k or 4k cluster sizes worked, 16k or 32k cluster size did not).
You dont need an empty sd card for it to work either. As long as the card is formatted correctly (as above), and you put a file called HERMIMG.NBH in the root directly, it should work.
When you soft-reset, you should see a white screen that says "Loading..." for a split second, and then if it detects the HERMIMG.NBH, you should see the prompt asking you if you want to start flashing. It will also tell you what you are trying to flash (IPL, SPL, Splash, OS, GSM, ExtROM, etc.).
Ok, got tired of waiting for the VZ upgrade and decided to go the DCD route.
I am using scrawnyb's upgrade guide and got the Hard SPL 2.40 Bootloader on my Verizon 6800 with no problem (I did get stuck on the bootloader screen but fixed that with the exit bootloader program). Now the questions that will hopefully allow me to finish:
1. According to Scrawnyb, you load the radio first. I downloaded 3.42.30 and extracted it and it extracts as a .nbh file extension, not an executable. So, how do you execute it? I tried clicking on it, changing the extension to a .exe, but it still won't load on the phone while in bootloader.
2. Do I need to load the DCD 3.2.5 first and then the radio?
Thanks in advance for the help.
Les
XV6800 Stock (trying to go to DCD 3.2.5 and Radio 3.42.30)
Upgrade
The easiest thing to do is rename the .nbh TITAIMG.nbh and put it on the root of a sd micro card and enter the bootloader by doing a hard reset and allowing the update to run, then get the dcd kitchen or rom and follow the instructions on the download thread. There is a great wiki at the beginning of this site.
Good Luck and Enjoy like the rest of us!
Don't forget to thank all of the great people bringing us these great ROM's
There is also an executable version of the radio somewhere. That is what I used to flash to the latest radio version. I dont remember where I got it - it was either from this site or another site.
I then wanted to go to an earlier radio version and had to use the SD method. Overall, the SD method is pretty easy, once you get the card formatted correctly, which can be tricky.
Thanks for the tips. Now, I seem to have a new problem. Again, the only change I have made to the phone is install Hard SPL 2.40. I still have the stock rom, etc. Now though, when I hit the power button to turn off the display and go into sleep mode, it completely cuts the power and I have to do a soft reset. Anyone know whats up with that?
Jeez, maybe waiting for the damn VZ update wouldn't be so bad after all :-(
Thanks,
Les
Well, just learned something that might be of value to others. As above, sleep mode was not working when pushing the power button if the phone was on - I was having to do a soft reset to turn the phone back on. Again, keep in mind that I had not flashed a new radio or rom yet, only loaded Hard SPL 2.40. Figuring I had a bad button and anticipating taking it back to VZ, I downgraded the Bootloader and relocked the phone using Titan Relocker as per the Wiki. Now the bootloader is V-1.06 and guess what? After a hard reset and reprograming, etc. - the power button is acting as it should.
Well, thats enough for tonight, might try again tomorrow but going to have to find the radio in a .exe format first. Otherwise, I guess I will have to try the SD card route.
Thanks,
Les
I had the exact same problem, flashed the bootloader and then had to go to an auction, phone worked great until it either fell asleep or I put it to sleep, then it wouldn't come back until I reset.
This apparently is just a common issue for those who have started the upgrade but didn't complete it.
I also had the issue with formatting the memory card, my laptop has a SD card slot on it, but it uses some weird software driver that makes the drive letter disappear when the card isn't inserted, and this prevented it from formatting it correctly. I then tried a USB adapter that turns any SD card into a pen drive, it also wouldn't work, so I broke down and bought a cheap mem card reader from walmart for $20 and it works perfect. And has a SIM card reader on it to boot, tho I don't own a phone with a SIM card, but if I ever do, I'm all set
BTC
BillThyCat said:
...
I also had the issue with formatting the memory card, my laptop has a SD card slot on it, but it uses some weird software driver that makes the drive letter disappear when the card isn't inserted, and this prevented it from formatting it correctly. I then tried a USB adapter that turns any SD card into a pen drive, it also wouldn't work, so I broke down and bought a cheap mem card reader from walmart for $20 and it works perfect. And has a SIM card reader on it to boot, tho I don't own a phone with a SIM card, but if I ever do, I'm all set
BTC
Click to expand...
Click to collapse
Had the same problem with my dell laptop built-in SD reader (I have a thread about this). Had to whip out my sandisk card reader which ended up working flawlessly.
Seems like the built-in ones just dont do it properly.
Is there a way to flash the Raphael without Windows, just by booting it into SPL and inserting a microSD with an image on it?
Why I'm asking? What, if a new ROM bricks the device in such way, that ActiveSync will no longer connect to it? RaphaelCustomRUU.exe will not work anymore.
If you have HardSPL you can flash from the SD card. I have flashed 6-7 custom roms on my TP and I haven't used the custom RUU for any of them.
knight14th said:
Is there a way to flash the Raphael without Windows, just by booting it into SPL and inserting a microSD with an image on it?
Why I'm asking? What, if a new ROM bricks the device in such way, that ActiveSync will no longer connect to it? RaphaelCustomRUU.exe will not work anymore.
Click to expand...
Click to collapse
I had this problem with ROMeOS v1.04, activesync just did not connect and no programs started, rebooting did not help. I already thought my phone to be brick!
Just press volume down and powerbutton to turn it on (should be off before of course) and you will end in the bootloader, flashing with RaphaelCustomRUU.exe works if the phone is on in bootloader mode and connected to computer. (thank god!)
XL3N7 said:
If you have HardSPL you can flash from the SD card. I have flashed 6-7 custom roms on my TP and I haven't used the custom RUU for any of them.
Click to expand...
Click to collapse
Instructions would be nice if provided also....
I guess im the only one who cannot flash a ROMeOS rom from a SD-Card.
I've tried everything formatted the card to FAT32 renamed the .nbh to RAPHIMG.NBH tried caps and non caps. I even tried to format to regular FAT but still no go.
As you can see in my signature i have flashed Hard-SPL 1.90.OliNex
Mine are called RAPHIMG.nbh and they have to be in the root map of your SD, I do this with al the new ROM flashes, because I believe it's faster and you don't have the battery limit (which is there for good reason of course). So root map and there you won't see .nbh in the root map, just RAPHIMG. hope this helps
12aon said:
Mine are called RAPHIMG.nbh and they have to be in the root map of your SD, I do this with al the new ROM flashes, because I believe it's faster and you don't have the battery limit (which is there for good reason of course). So root map and there you won't see .nbh in the root map, just RAPHIMG. hope this helps
Click to expand...
Click to collapse
What do you mean with in root map you won't see .nbh? Do i have do delete the extension if so then that has never been clear for me
WatskeBart said:
What do you mean with in root map you won't see .nbh? Do i have do delete the extension if so then that has never been clear for me
Click to expand...
Click to collapse
You need the nbh file extension. It just won't show if you have "Show File Extensions" turned off. If you use FileExplorer on PPC, you'll see RAPHIMG not RAPHIMG.nbh. (Check the file name in Windows or TotalCommander to be sure).
The file must be on the root of you SD Card and it should work, unless the OliNex HardSPL has some extra options / checks.
Ta
Dave
DaveShaw said:
You need the nbh file extension. It just won't show if you have "Show File Extensions" turned off. If you use FileExplorer on PPC, you'll see RAPHIMG not RAPHIMG.nbh. (Check the file name in Windows or TotalCommander to be sure).
The file must be on the root of you SD Card and it should work, unless the OliNex HardSPL has some extra options / checks.
Ta
Dave
Click to expand...
Click to collapse
I already thought he meant the hide extensions thing but just to be sure
I've tried RAPHIMG.nbh but it doesn't work for my device.
I also own a Hermes and just flashed it the SD-Card way with HERMIMG.nbh and that device works perfectly, so it isn't a card problem.
Could it be an Hard-SPL thing then?
WatskeBart said:
I already thought he meant the hide extensions thing but just to be sure
I've tried RAPHIMG.nbh but it doesn't work for my device.
I also own a Hermes and just flashed it the SD-Card way with HERMIMG.nbh and that device works perfectly, so it isn't a card problem.
Could it be an Hard-SPL thing then?
Click to expand...
Click to collapse
I've spoken with cmonex about this and there's no reason it shouldn't flash from the SD card. The code is in Olinex 1.90 to do it.
RAPHIMG.NBH on a FAT32 Formated Card and hey presto
Ta
Dave
I just tried it and it works. The file is named 'RAPHIMG.nbh' on the root of my storage card. Booted into bootloader mode and it instantly loads the nbh file.
Nice to know. So finally I do not have to boot Windows any more
I tried this for the first time just now, hadnt even thought to use the sd card, I usuallly go through all the hassle of using a vm just to flash.
File is named RAPHIMG.nbh on the root of the sd, restart holding vol- and thats it.
dabs said:
I tried this for the first time just now, hadnt even thought to use the sd card, I usuallly go through all the hassle of using a vm just to flash.
File is named RAPHIMG.nbh on the root of the sd, restart holding vol- and thats it.
Click to expand...
Click to collapse
Could it depend on which ROM you flash? Because honestly i only tried to flash ROMeOS with SD-Card. I never tried to flash DCS or something else.
So many people with successful flashes with the SD so i'm almost sure i'm doing something wrong here.
I will try again a soon as a newer ROM comes out because i'm a bit tired flashing different ROMs
Thanks for all the support.
I was using ROMeOS v1.10. sd card is a sandisk 6gb. Its hard to see what could prevent it from working for you, hopefully something will turn up.
Ishould also note it is considerably faster flashing from sd than over usb.
Put your miniSD in a card reader and from Windows, right click it and select format. Choose fat32 and leave the volume label blank. If it automatically adds a name delete it before proceeding with the format. After it's formatted, place your RAPHIMG.nbh on the rott of the card. Enter bootloader by holding volume down and pressing reset and it will find the image file. From there follow the on screen instructions and it will be done in a few minutes.
S ¤ F ¤ W
dabs said:
.../... I should also note it is considerably faster flashing from sd than over usb. .../.
Click to expand...
Click to collapse
It is indeed. It is:
1. Safer [Risk free if you ensure you have at least 50% of battery left.]
2. Faster [Way much faster.]
3. Windowsless [that's a blessing!]
Good luck.
Cheers.
I had problems too flashing hang.tuah's rom but only 1.05 it would flash but not boot up, i tried through 2 pcs and via flash card.
i couldn't flash by my actual card cause from what I read sdhc isn't necessarily supported in bootloader, so i borrowed a friends 2gb microsd and that worked with flashing.
Since there is a new version of ROMeOS i'm gonna try it again.
I'm going nuts over here
I renamed the ruu_signed.nbh to RAPHIMG.nbh and copied it to the root of a FAT32 formatted SanDisk 2GB Ultra II card (non-SDHC) and check it for errors.
When i insert the card and reset while pressing the volume down button to enter the bootloader, the device says "No Image File Found" and just stays in the bootloader
What am i doing wrong here??? It's no that a big deal because i can flash using the wrapper but it should also flash with the SD-Card.
I'm almost giving up here
If there are any more idea's bring em up
Basically, here is m problem:
I have a hermes. The GSM wasent working. I though maybe an upgrade to WM6 could correct some software bugs.... Wrong!
I realized it actually briecked (type 1a). Trying to follow the instruction to fix it, but i am not able to send ANYTHING to it!. Either by SD or Custom RUU. Finally i am standing with a Hermes, WM6, and it will NOT accept any flashes i try to put in it!
Its on HardSPL (2.10) IPL 1.04
Thanks in advance
Stephen_D
EDIT: Forgot to say what happens when i try to flash it!
With an SD card all I get it "Loading..." then returns to the bars
By USB it starts updating And freezes on 0%, then the software pops an error after 5 mins like what it can communicate.
Thanks
sort of the same problem...
I've been trying to flash a ROM for the past hour now and my phone doesn't get flashed.
(I already have HardSPL and I'm using a 1gig micro sd)
What I did:
Format the sd card to FAT32
copied the RUU_signed.nbh to sd card then renamed it to HERMING.nbh
I place the sd card on the phone that's connected to a charger
I press Power Button and Ok button on the left side then push reset
What happens:
It goes to bootloader mode (tricolor screen)
then it says loading...(2 seconds)
then goes back to the tricolor screen again
I waited for the prompt that I need to push the Power Button but it never came, so I soft reset it and tried it again but the same all over again.
The ROM I was trying to flash is the AT&T stripped ROM, I read it here that it's better to flash a stock ROM first before flashing/upgrading to a cooked ROM.
By the way I just found out that my X01HT isn't a Softbank, it's a DoCoMo.
Is my phone upgradeable?
Can someone please tell me what I missed?....I really want to upgrade my phone without bricking it.
Thanks!
Stephen_D said:
With an SD card all I get it "Loading..." then returns to the bars
Click to expand...
Click to collapse
What format is your SD card? Fat or Fat32?
Its gota be Fat32 to flash from it.
it's all good now....
I've given up flashing my phone from the sd card so I decided to flash it with my laptop instead. Luckily it worked without a hitch.
I'm so loving my phone now, been playing with it for 2 hours and the usual hang ups I got before are non-existing anymore.
To use the sd card method you need to check that the .nbh file is hermimg.nbh, NOT herming.nbh as you had written on your previous post.
The holy trinity of sd card flashing, Formated FAT32, Named hermimg.nbh & sd card is 2Gb or less...
Cheers...
I see.....
ok hermimg.nbh
will try this again, maybe next week since I'm enjoying my new ROM right now.
Thanks ultramag69!
Hello,
FCWs 6.5 Home edition 8325,2gig
Long story involving a 5 year old.
Basically right now I can only fire up in sort of a limp mode; "low on memory" or no "permission". Probably due to scores of "FILE000x.chk" files on the device after using Pocket Mechanic Pro on microSD card.
1) It'll only reliably boots with a battery out/in technique.
2) Its "connected" to desk-top PC but as a "guest" and isn't "synced"
3) I can browse it through ActiveSync on the PC, but can't add, move or delete files due to "low memory" or "permissions" (same on the 8525)
4) A few programs won't run and are not recognized as "valid P-PC" apps, including the front end "home2"
5) Can't flash anything as SSPL ROM flasher gives "ERROR [224]: device not responding".
Started with a corrupt 2 gig microSD, couldn't write to it, ran Pocket Mechanic Pro. that Problem solved, this prob created.
Read all Wikis, searched error 224, reflashed about 15 times, know the ropes.
Any Ideas are greatly appreciated!
Regards, PK
Have you tried flashing the rom from the memory card, its the only thing that i can suggest i don't know much about broken hermes.
Hope this helps and that you find a fix
Thanks for the reply Scott,
That was my next line of attack but I'm not clear yet on exactly how to do it (I'll find out).
My big problem is I can't add (or remove or even move) any files on the device either from File explorer on the phone or through. ActiveSync on the pc (I can look at them though...). I also dont have a card reader writer.
I think a lot of problems would go away if I could delete all the 200+ *.CHK files generated by Pocket mechanic pro. I think that where all my memory went.
I just found a way using delete feature in "RAR" ...6 down 200 odd to go. Antone know how to select multiple files?
Regards, PK
Regards, PK
Now its in solitary
I managed to delete 219, *.chk files from the rom hoping to free up memory. I'ts still isolated, I cant add any files to it (like a ROM or utility) through activeSync. The warning is it "can't find the file or path." of the file. To flash a rom from I still get "error 224," don't recognize the device.
Tried to load the SD card with a rom through my camera, no luck, the camera says "cannot flash".
The OS still works in a limp mode, no phone, half the programs inaccessible and home2 no longer works.
Fun.
PK
Have you tried connecting the card to the computer and reformatting it from there you might then be able to flash another rom
Thanks,
I don't have a card reader. The only thing I do have is a printer that accepts multiple card types and a camera that takes this card. So far I can't right to either.
Ya, theres a thread that tells how to flash from a card. Right now though its just of limits.
Thanks, PK
Edit: just got card reader.
Have SD Card with rom can't boot off it and install.
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
pk2 said:
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
Click to expand...
Click to collapse
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Thanks alot for the reply,
I think you are the man! I did change the name but changed it to HERMING.NBH not HERMIMG.NBH. It seems to be flashing (slowly) right now.
If this works I owe you a BIG cerveza!
Regards, PK
vijovame said:
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Click to expand...
Click to collapse
Vijovame,
You are definitely the man.
I flashed the plain Jane stripped ATT ROM but EVERYTHING WORKS! It syncs, the phone works, camera, etc, etc...Now I'm off to flash something interesting.
Thanks for making me re-read the .nbh name. (I've been trying to fix this about half the time I've owned it...my first smarphone)
All the best!!
PK
its good to hear that youve sorted it, theres a few roms out there at the moment so you may have to look around a bit and flash quite a few of them, the safest way is the card method but it is up to you.
Have fun with your hermes
Scotty,
Ironically I had already blindly flashed just about everything out there without a hitch. I finally settled on one. That's when all 'ell broke loose. Now I've got the stripped ATT on my flash drive ready to install anytime if I have to.
Thanks, PK