correct gps settings for ap4 - Advantage X7500, MDA Ameo ROM Development

thanks for ap4 havent had a problem but i have gone and found so many settings for gps can any one give me a default or a list to have my gps work thanks

Theres a lot of advice here about getting a decent fix. The bottom line is your best bet is to use the physical GPS COM port unless you need to run more than one GPS app simultaneously . A software port cannot be more efficient than the hardware port unless it is opened regularly in the background to maintain a current fix.
The hardware is COM5 and Baud can be left at the NMEA standard of 4800.
Remember to go outside for a 1st fix

Related

Correct Gps Settings On X7500

HELLO I HAVE X7500 WITH Athena Project Black Dual by PK 3.0 BUT BEEN OVER A LOT OF POSTING BUT STILL CANT GET MY GPS TO WORK ON GOOGLE MAPS OR TOMTOM 6.03 CAN SOMEONE PLEASE HELP THANKS
For me the GPS setting that works is "Other NMEA GPS receiver" using COM4 - TomTom 6.010.
Hope this helps.
temokk said:
HELLO I HAVE X7500 WITH Athena Project Black Dual by PK 3.0 BUT BEEN OVER A LOT OF POSTING BUT STILL CANT GET MY GPS TO WORK ON GOOGLE MAPS OR TOMTOM 6.03 CAN SOMEONE PLEASE HELP THANKS
Click to expand...
Click to collapse
For Tom Tom, go to main menu /change preference/show GPS status/configure. Select Other NMEA GPS receiver, baud rate 4800 and Com 5:
Then wait for the signal. It may say "No valid GPS signal" for a while, but it will come later. How soon depends on whether you're indoor, outdoor, and how clear the open sky is.
To get Google Maps working, go to Start/Setting/system/external gps,
In the program tab, enter Com5. In the hardware tab, enter None in the hardware port and enter 4800 in the Baud rate. IN the access tab, tick manage GPS automatically.
Then, go to google map, Go to Menu/Option/GPS settings and choose Set by Windows (Via Start --> Setting).
After that, use go to Menu/Use GPS, then stand under open sky for a while. In about 2 minutes, I get a blinking blue dot showing your current location, and the map refreshed from wherever you were to your current location.
There are other possible settings, such as using com 4, 9600 baud rate, etc, but the above would work, and is what I'm using without any problem.
Good luck.
One tip I've discovered is to install VisualGPSCE (Freeware IIRC) and try the com ports till you find the right one - the main satellite tab will show a list of satellite numbers after a few seconds if you're on the right port, Zero's if you're not. I would recommend making sure your clock is set correctly, you've got an upto date quickgps file and are stood outside/near a window if you're setting up for the first time!
Also, My Settings are Com5 (True Hardware), Com4 (Software Multiplex (is that the right word)) and 57000 baud is good.
Use Destinator (get a trial edition if you can) just to get the "RIGHT GPS Port"
Seems It uses the port which WM6 doesnt automatically detect (atleast for me)
Regards
thanks to all
i have at last manage to work thank u all

Philippines GPS

anybody from the philippines who's using gps on their athena?
may i ask what your gps settings are?
i'm using x7501.
ciao!
Your location is irrelevant as far as picking up GPS signals is concerned. You just need to ensure any GPS aware program is pointed at the correct COM port.
The hardware COM port is COM5, so pointing a program to COM5 @ 4800 Baud ought to work OK.
By default, the WM GPS Driver is active- Start/Settings/System/External GPS, and this may have the port settings changed, typically to COM4. This is only useful if you plan to use more than one GPS program concurrently. Personally I don't, so I have the Access tab's Manage Automatically unchecked.
Pinoy X7500 Toronto Based
Yes just use COM 5, 4800 Baud and you're all set to go. This is also the settings Im using on mine with iGuidance v4.
Im just curious, what GPS software & Maps are you using there? So that just incase I'll go "balik bayan" next year, I'll know what to use.
Here is a Philippine based Windows Mobile Forum:
http://www.pinoywindowsmobile.net/
While com 5 does work, it is not the fastest that will get the GPS lock.
For the absolutely fastest way to get GPS fix, see this thread (see post #51)
http://forum.xda-developers.com/showthread.php?t=375959&page=10
eaglesteve said:
While com 5 does work, it is not the fastest that will get the GPS lock.
For the absolutely fastest way to get GPS fix, see this thread (see post #51)
http://forum.xda-developers.com/showthread.php?t=375959&page=10
Click to expand...
Click to collapse
Thanks for that link Steve- the whole concept is fascinating I've seen similar problems using different Radio ROMs and I suspect some of these lock differences may be Radio related to an extent.
To put my logical hat on, I can't see how you can ever get a lock with any software port faster than using the hardware port, which on the Ameo/7500 is COM5. Maybe using the WMGPSID and a software port activates the GPS in the background (at intervals?) to get a quicker fix?
In like manner, I also find that using QGPS actually takes longer to get a fix than just opening the port directly- this may be a function of the Orange SIM I use, or the ORange service itself, as of course QGPS is carrier dependent on getting a good SIM location.
But the most confusing thing in my Ameo is that Radio 1.50 simply never gets a satellite lock (at least it takes 25-40 minutes) where 1.47 gives me a lock in 1-3 minutes regardless of whether I use COM5 or software COM4 or 8. I've tested, upgraded, downgraded and reupgraded to no avail. 1.47 works and 1.50 doesn't This is the same whether using TTN6,m iGO2006 or iGO2008 (which I suppose would be expected)

gps settings not sticking

I just upgraded to the latest dcd rom .6 from and older one. I didn't touch vereizon's.
When trying to configure the gps, I set th GPS hardware port to com 4, baud rate 4800 and the program port to none.
After I save and see that google maps cant find th gps hardware, I go back to the win mobile gps hardware settings to see that it switched back to none.
The gps was working fine before I upgraded the rom.
What am I doing wrong?
Did you read this?
http://forum.ppcgeeks.com/showthread.php?t=17032
Its a basic step by step to ensure you have all the little things done right.
I always forget to check to see if gps is set to on or location only.
help me with this
I onlty have rom 2.09.605.8, where do i go now?

COULD MODs CARE ABOUT GPS error here - a long time has fixed for many guys

Hi Mods!
I really sorry that I have to open new thread, because I and some others also posted here
http://forum.xda-developers.com/showthread.php?t=405016&page=4
but it seems that no one can solve that problem correctly. And MODs seems that don't know about that problem.
So, could MODs give us some ideas and solutions.
For example: I used Original ROM, GPS with TT7 was OK.
But when I change to another ROM (any other ROM), it was so good that everything works well but not GPS.
Hope to hear from u soon.
Thank you.
vqscorpions said:
Hi Mods!
I really sorry that I have to open new thread, because I and some others also posted here
http://forum.xda-developers.com/showthread.php?t=405016&page=4
but it seems that no one can solve that problem correctly. And MODs seems that don't know about that problem.
So, could MODs give us some ideas and solutions.
For example: I used Original ROM, GPS with TT7 was OK.
But when I change to another ROM (any other ROM), it was so good that everything works well but not GPS.
Hope to hear from u soon.
Thank you.
Click to expand...
Click to collapse
You do know about the problem with validating maps for a new installation of TT7 ?
Do a google for this in xda -devs.
i used this TT7 on Kaiser and it worked like a champ.
and from your instruction, I also sink to another sea that the need information is somewhere but could not find out.
could u pls give me a better ideas. pls don't tell me that: google something in somewhere.
I spent so much time to discuss and post somewhere else.
thanks
Clarify.
Please explain the type of gps problems your having, Problems with getting fixes? Problems with tomtom?
I need yr help
thanks friend
My problem is here.
When I bought x7501, I installed TT7.45 with Map of North America. It work fast and better than Kaiser I had.
Then I tried to Up ROM to SPL 3.5 (every ROM for 3.5) and I could not use GPS. TT7 work but it only show the working screen with: Waiting for valid GPS signal... forever. And when I find the GPS position, it says: Poor signal.
I tried to change Radio version but failed.
I also tried to convert back to SPL 1.2 now and working with Official ROM 6.0 (but with SPL 1.2 Oliprof). I tried to change Radio version, from 1.47 to 1.57 to 1.58 but failed. So strange (because I had to format the drive when I convert back from SPL 3.5 to SPL 1.2 so I lost my backup file for SPL 1.2 for original ROM).
Now I can not receive GPS signal.
I also try to install GPS Proxy,but this program doesnt run in my Athena, it says: Negative exception and quit.
I aslo try to change th port for GPS to another COM port, but it will not turn on GPS device.
In my Athena, the default COM port for GPS is COM4.
So, that's my problem.
Could you help me with detail instruction.
So thanks and wait for your help
try
you can try going to
settings/system/external gps/
*
software port com 4,hardware leave it at none,set baud 9600,manage gps automatically checked
*
import attached reg file on device
*
install attached visual gps
*
run quickgps ,download updated empheris file
*
soft reset device
*
load visualgps, click agree,click edit,settings,set port to com4,baud 9600,click ok
*
hold device by window or go outside
*
Wait for grey signal bars to go blue then your set
*
load up ttn,click where u see signal bars in lower right,then agn on right above version number,configure gps to use other nmea,set com port 4,baud 9600
*
it should instantly have fix!
thanks friend
i hope it will work
i try it now then tell u later
but do u mean that it works for AP 4 only? or another rom?
What Radio do you have installed
i am confused because your sig says you have radio 1.57 but you say in your post above that you couldn't upgrade from radio 1.47.
AP4 needs at least radio 1.50 according to here http://www.htc-hackers.com/uploads/AP4_How_To_1.8.pdf
vqscorpions said:
thanks friend
i hope it will work
i try it now then tell u later
but do u mean that it works for AP 4 only? or another rom?
Click to expand...
Click to collapse
Steps are optimal for michy roms,ap4 gps should be blistering fast "out the box"! When I used ap4 I was using radio 1.57,and even indoors I had gps fixes in 30 secs after soft resetting.
As of now I use radio 1.58 for hsupa on michy 6.1 rom and have fairly good gps.The steps above emulate my settings with exception of rom.
GOOD NEWS - GPS is working like a rabbit
Hi friends
Firstly, so thanks to all of my new friends, who were trying to reply and show me the way to solve the problems.
Secondly, I want to give u the good news. Now GPS is working as a champ.
But it is a little bit difference with some guides from u.
- I follow the steps above and change the baudrate to 9600, but after reset, it comes back to 4800 as default.
- The COMPORT for program is COM 4. For the hardware, I set default is NONE.
- Then, I install VisualGPS.BeeLineGPS.v1.83.Build.125 and reset. After that I run Visual GPS Beeline first, it works after 20 seconds and lock my location when I stay in my car (The weather now is -1 celcius degree outside - very cold).
- Then I run TOMTOM, I choose BUILT IN GPS (but not other NMEA). And TOMTOM works perfectly after 10 seconds - I did that because I remember that I always chose BUILT IN GPS when I used TT7 with this one two weeks ago.
And here are some tests after that:
- I turn on Wifi, open DATA connection (that is a issue when I use Kaiser, if Data connection is opening, TT7 can not receive the signal), then open TT7 (without openning the VISUAL GPS), it works after 12 seconds.
- I come into my room (the second floor in a three floors house) and turn on TT7 without using any other software, it lock after 10 seconds with average 5-8 sats.
WOW. It can't be better.
But I still don't know which one help which one. Because, when I installed TT7, then I run it for the first time yesterday, it said: could not run because of the memory available.
Then I try to run GoogleMap (even if I did not connect to Wifi - so ofcourse GoogleMap only turned on but did not run with data), then I tried to open TT7 again and it run (confuse here, who can explain to me)
The problem only now is.... WIFI. I hope can fix it soon as the instructions from CMONEX.
Thanks friends.
slight correction
just a minor correction to guide after you stating baud rate returning to 4800, in external gps settings on hardware tab to change baud I notice you need to set hardware com port to com 5 first then setting baud to 9600 ,then click ok to save.Go back in external gps settings and back to hardware tab ,as you will notice settings saved but now this time select none in hardware port and leave baud at 9600 then hit ok.
As I remember in ap4 4800 baud was default and worked best with that rom anyway,and so far it works for you.I do recommend setting use other nmea in tomtom input your baud and software com port settings from external gps control panel because you used visualgps to boot up your gps to get sat fixes for tomtom, with these settings you dont have to use visualgps to warm it up.Make sure you update your quickgps evrey 2 days then soft reset and hold phone by window or go outside when you use gps with new emphemeris file from quickgps as it can take a lil bit longer to regain track ironically ,but once you get fix itll be super quick no matter where you are,even if you soft reset.The only time you need to have clear view of sky again to get sat fix is if you turn off device completely for an hour or 2, or update quickgps data agn in 2 days (up to full 3 sometimes) or flash a new rom :>.
For wifi,I dont kno how to fix,cmonex prob has to send you a special file to regain mac address so wifi can work even after spl changes.

Radio 1.58 and GPS

Hi, i have 1.58 radio and found the following issue:
GPS does not work properly, its not precise, in tom tom it shows you a bit "OFF" the co-ordinates from where you actually are and takes quite long to get a fix.
You have to select com4 in tom tom in order for the gps to work.
Can anyone please tell me how to correct the GPS problem?
Many thanks
Hi
how far off are you? my gps would be within 10-30 metres depending on speed. I wonder how accurate the mapping is in your area?
the settings I use are
in external gps
program port = com 8
hardware port =com 4
baud rate = 4800
in TomTom
"other nmea gps receiver"
com 8
baud rate 9600
this will get a cold fix, usually within 1 minute. you need to get a fix before you start to drive. It will never get a fix if moving. I dont bother with quick gps. it isnt any quicker. There is a thread discussing gps settings for Athena, have a search for it

Categories

Resources