I'm flashing my Qtek 8500 back to stock using the RUU_STAR100_3.6.251_02.09.90 ROM and it's getting stuck at 12%.
Can anyone shed any light on this? It's before sending it back for a warranty repair so I do need a stock ROM.
Ric
Hi,
Turn off your phone, then press the two buttons on the botom of the panel on the right and left (the one for the camera and the vocal note) at the same time, and connect your phone to your computer using the cable (keep pressing the two buttons). It will go to boot loazding mode. Then, start the flashing process again.
Regards,
F.
sorted!
I was trying to be smart and do it using Windows XP running as a virtual machine under Mac OS X using Parallels. Booted XP natively and it works fine. Ho hum.
Related
Could anyone help me?
When I turn on the bootloader mode and connect it to pc,it won't make any connection and the red light won't turn on to..
Any suggestions?
I can't use my device because I can't flash new windows...
Could anyone help me?
First of all I’m running XP, and Active sync.
I used Soft SLP- VO.1 , I copied the NK.NBF
From a G4 safe rom into the soft slp folder.
While stuck in boot mode I did a hard reset,
Pluged in the usb and waited for power up.
Then I held the power button down and watched
Active sync try to connect at the same time started
Soft SLP . When active sync stopped I released the power button and then followed the instructions as normal. The phone went into white mode and copied all 100% but it still went into boot mode after it rebooted, but I was able to connect with the phone again. Now all we need is someone smarter then me that can figure out the rest of it. At least there is still hope for the dead ones.
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
lisah456 said:
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
Click to expand...
Click to collapse
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
after task29,when your device reboot
press botton "volume down" and will go in bootloader mode
now if you have your device stuck in white screen,remove battery cover
press red botton for softrest and press "Volume down" botton
bobsbbq said:
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
Click to expand...
Click to collapse
opsss..sorry bob
i have look now your post
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
kikimax said:
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
Click to expand...
Click to collapse
It won't because you're in the bootloader. Does it say USB at the bottom of the bootloader screen? As long as it says USB when the phone is plugged into your computer, flash a ROM and be happy
Hello!
And what if my hd2 not entering into the boot loader?
Thanx in advance
There is only one way to get into the bootloader.
Hold down volume and keep it down....
After that press the start button and your phone will boot up.
Now you will see the tree colored screen and you're in the bootloader.
Goodluck.
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
When you are in the bootloader screen, connect the phone to the computer /with the usb cable/ on the same bootloader screen it will change to USB - look at the bottom of the screen:
Open the folder - on your computer - where the ROM you want to flash is:
find the "RomUpdate*.exe" or "Install.exe" /if Android it will most likely say "DAF.exe" - run it as Administrator/ file and run it. Do as it says on the screen.
Do not disconnect the cable, do not touch the device. When it is finnished it will restart the device, disconnect the cable and enjoy your new OS.
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
use a <4gb or preferably <2gb sd card - class 4 or 2 with LEOIMG.nbh.
HSPL3_pkg after that - make sure .nbh (as above on sd root) is your stock and you CLEAN-reinstall bootloader.
ps:
Then hspl, then radio, then magldr, then windows 7, the hacks, then call M$= LIVE!
Hi guys i have a similar problem. After task 29 i went into the bootloader but can't install any rom whatsoever. I have SPL 3.03 on my devide, mind no not hard spl but SPL. Can anyone please help me solve this issue? I also tried to flash using sd card but it doesn't work. Please help me save my hd2. Thanks in advance.
tmo-hd2 wont go into bootloader after task29
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india..
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
gdsbalaji said:
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
Click to expand...
Click to collapse
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
lms1407 said:
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
Click to expand...
Click to collapse
I hvnt even instaled MGALDR yet....task29 and hd2 went into trouble...need to get to bootloader to save it now
Tried this as well before posting....hv a 2gb sd card>formatted to fat 32> stock rrunbh to leoimg.nbh > moved to root of sd card....but this can only work if bootloader can be initiated right? i cant get to boot loader
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
SOLVED {bootloader dont load}
checkout the solution for my problem here....might help u as well.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
______________________________
if you feel this helped...thank me
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
DeAdMaNwa said:
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
Click to expand...
Click to collapse
Man, did you say blackstone? You should go into Blackstone forum
To go into bootloader, turn off the phone. Press volume down button and the POWER ON button (not start button) at the same time until the screen appear. It works on both Leo and Black Stone
Goodluck
i have sprint touch pro CDMA with new energy rom. i tried to sync it with my laptop. phone and laptop both hanged. i resetted both. laptop started properly.
but TP have problem. its struck on start screen with TOUCH PRO and radio and other information. its not moving ahead. the other problem is that i cannot enter booloader as my volume down button is also not working. i am really in a fix over here.
i need to start my phone. last night also, it stuck at start screen but when i press reset button, it started. but today its not going beyond start screen.
i tried all the possibilities like connecting to different PC, same PC, different USB, removing SD card and then resetting, but no luck..
please help.....
thanx a million in advance.
csmartly said:
i have sprint touch pro CDMA with new energy rom. i tried to sync it with my laptop. phone and laptop both hanged. i resetted both. laptop started properly.
but TP have problem. its struck on start screen with TOUCH PRO and radio and other information. its not moving ahead. the other problem is that i cannot enter booloader as my volume down button is also not working. i am really in a fix over here.
i need to start my phone. last night also, it stuck at start screen but when i press reset button, it started. but today its not going beyond start screen.
i tried all the possibilities like connecting to different PC, same PC, different USB, removing SD card and then resetting, but no luck..
please help.....
thanx a million in advance.
Click to expand...
Click to collapse
Even im facing some issue with Energy's New ROM cookie 2.0 touch glass 0ct 14.
My cell got stuck when i was rebooting the cell. After that when i boot the cell it will get stuck at main screen (Touch Pro logo with red color Text). I left my device like that.After few minutes(more than 10 minutes) when i checked, my device was in main screen and i was able to use it ..
I will flash the old ROM once i go back to home today.
And regarding entering into tri color bootloader,
I am using the mini usb cable ( not htc's usb cable) to connect my device to PC, and it works fine including sync,charging,storage etc
- i switch off my device
- connect my device to PC using MINI USB cable
- It automatically switches on the phone and goes to bootloader screen
PS: i do not press any button, not even power on button
Please some one confirm if this is normal behavior or only it is happening only with me ,
Regards
happy20b said:
Even im facing some issue with Energy's New ROM cookie 2.0 touch glass 0ct 14.
My cell got stuck when i was rebooting the cell. After that when i boot the cell it will get stuck at main screen (Touch Pro logo with red color Text). I left my device like that.After few minutes(more than 10 minutes) when i checked, my device was in main screen and i was able to use it ..
I will flash the old ROM once i go back to home today.
And regarding entering into tri color bootloader,
I am using the mini usb cable ( not htc's usb cable) to connect my device to PC, and it works fine including sync,charging,storage etc
- i switch off my device
- connect my device to PC using MINI USB cable
- It automatically switches on the phone and goes to bootloader screen
PS: i do not press any button, not even power on button
Please some one confirm if this is normal behavior or only it is happening only with me ,
Regards
Click to expand...
Click to collapse
i think its related to ROM. one 1st night, it started, but form last 2 days, i have kept it on for long time, but no result. will try again.
csmartly said:
i think its related to ROM. one 1st night, it started, but form last 2 days, i have kept it on for long time, but no result. will try again.
Click to expand...
Click to collapse
Al d best , Ryt now i hav flashed Energy GTX sense2.5 Rom and going smooth. try flashing other Roms.
Regards
happy20b said:
Al d best , Ryt now i hav flashed Energy GTX sense2.5 Rom and going smooth. try flashing other Roms.
Regards
Click to expand...
Click to collapse
no luck... nothing happens...
if i remove battery and put again, its not going to bootloader on connecting with pc. only it shows that battery is being charged by flashing on round button...
csmartly said:
no luck... nothing happens...
if i remove battery and put again, its not going to bootloader on connecting with pc. only it shows that battery is being charged by flashing on round button...
Click to expand...
Click to collapse
Hmm , r u using usb mini cable or extusb cable from htc ?
happy20b said:
Hmm , r u using usb mini cable or extusb cable from htc ?
Click to expand...
Click to collapse
i tried with mini usb cable provided by HTC and also other make mini usb cable. but no luck
Hi All,
So, I tried to flash Cyanogen mod last night using the instructions here: http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide. I was coming from a BIONIX ROM that flashed fine.
Anyways, the phone went into a reboot loop in the recovery screen and I foolishly just held the power button until it stopped. When I turned it back on it was broken. That is, now all it does is display the white Vibrant logo in the middle of the screen with the smaller Samsung logo below it. If I hold the power button for about 8 seconds the screen goes black for about 2 seconds and then comes right back up to where it was. I can't seem to even turn the phone off any more. It just stays on that screen permanently unless I hold the power button, in which case the screen is off for 2 out of every 10 seconds. Yanking the battery of course turns it off, but putting it back in immediately returns it to the state I've described.
I've scoured these forums and tried every button press + battery state + cable state + SD card/SIM state combo suggested, but the phone won't go to download or recovery mode. I found one thread describing the exact same problem. The OP said he'd try a jig and then disappeared without any further updates. I'm going to try to get my friend to make a jig using one of these sets of instructions
http://forum.xda-developers.com/showthread.php?t=819551
http://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
but until then my questions is: does anyone have any experience with this problem (can't even turn the phone off)? If so, do you have any recommendations? Did a Jig work?
keep trying to get to download mode, pull battery, plug usb in to computer and to the phone, while holding both volume up and volume down pop in the battery. People have tried hundreds of times with it not working and then all of a sudden *bam* download mode.
So... my friend made me a jig and it works in that I can see the shoveling droid indicating download mode. However Heimdall/Odin won't recognize my phone. Heimdall's zadig utility won't locate the phone either, even with the cable plugged in. I'm, once again, stumped.
Just an update; I've tried Odin on three different computers, two Windows 7 (64 bit) and a Mac (with Heimdall). None of them seem to recognize the phone. Device manager on the Windows 7 machine does not update when I plug the phone in (in Download mode via the jig or not) and I can't find anything about Samsung in it anywhere. However I have installed the Samsung drivers; a few different sets I've found around the forums. I've also tried a couple utilities like the Vibrant toolbox and one click unbrick. Nothing seems to have any effect. I was so hopeful when the jig worked and got me to download mode, but now it's seeming I'm actually bricked. Has anyone seen a phone that could get to download mode but still be bricked? Oh, and I checked the cable using a friend's phone; her Mac recognized her phone using the cable. Haven't tried her phone on my Window's machines though.
Once again, any help is more than appreciated.
Have you tried to see if adb is working? If it does then try adb reboot recovery? If it works there is a file I can post for you later (is in my pc) that can restore your sbl.bin and fix your download mode problems.
Thanks for your help everyone, the problem was apparently resolved by a new cable; which is strange because the old one works for data transfers... just not for flashing apaprently. :S
Hey guys.....
This is pretty much my first thread . I have got a Chinese android tablet called HSG MIDX5A Telechips Tcc 8902 (a.k.a. Herotab RK7, Pandawill G11 1st model) with ARM1176J2 chip.
What I did yesterday is that I tried to get it into recovery mode and then somebody on IRC assisted me to flash the tablet with the recovery image using fastboot and then I got the recovery mode <3e> working but I was not able to navigate through the recovery menu using the home, back and menu buttons. However I do not have any Vloume up /down keys with this tablet .
BUT this is not my problem now. After I failed to navigate through the recovery menu I decided to flash a new lk.rom file using FWDN V7 2.13 and that went fine but as you guys know I need to flash the tcc8902_mtd.img after that. Here is the problem I want to get into the FWDN mode to flash the tcc8902_mtd.img but I`ve been trying since yesterday and I was not able to go into FWDN mode. My tablet is not booting too normally. I`ve tried to make the splash screen "I love you " to still there but no hope. I`ve tried the home+power button and also power+touch the center of the screen also did not work too. Whenever I release my finger out of the power button it just turn off.
So please what do you guys suggest ???
Alternatve method ?
I heard about USB Host boot mode or is it no longer needed even in my case ?
What about this ?
I am really sure that I flashed the right rom.
Again I am really struggling on how can I put the tablet in FWDN mode, however I tried the combination you just mentioned and it did not work for me . Yeah something happened to me yesterday that I tried to push the middle of the screen but firmly and really hard at the same time I hold the power button and finally the splash screen"I love you" freezed as it should be but I was not able to get it detected by FWDN V7 2.13 ? Am I doing something wrong ?Should I switch to windows xp 32 bit ? I am using windows 7 64 bit which I had to hack the drivers in order to get the tablet detected at the first beginning before I flashed the lk.rom file so please help