i have sprint touch pro CDMA with new energy rom. i tried to sync it with my laptop. phone and laptop both hanged. i resetted both. laptop started properly.
but TP have problem. its struck on start screen with TOUCH PRO and radio and other information. its not moving ahead. the other problem is that i cannot enter booloader as my volume down button is also not working. i am really in a fix over here.
i need to start my phone. last night also, it stuck at start screen but when i press reset button, it started. but today its not going beyond start screen.
i tried all the possibilities like connecting to different PC, same PC, different USB, removing SD card and then resetting, but no luck..
please help.....
thanx a million in advance.
csmartly said:
i have sprint touch pro CDMA with new energy rom. i tried to sync it with my laptop. phone and laptop both hanged. i resetted both. laptop started properly.
but TP have problem. its struck on start screen with TOUCH PRO and radio and other information. its not moving ahead. the other problem is that i cannot enter booloader as my volume down button is also not working. i am really in a fix over here.
i need to start my phone. last night also, it stuck at start screen but when i press reset button, it started. but today its not going beyond start screen.
i tried all the possibilities like connecting to different PC, same PC, different USB, removing SD card and then resetting, but no luck..
please help.....
thanx a million in advance.
Click to expand...
Click to collapse
Even im facing some issue with Energy's New ROM cookie 2.0 touch glass 0ct 14.
My cell got stuck when i was rebooting the cell. After that when i boot the cell it will get stuck at main screen (Touch Pro logo with red color Text). I left my device like that.After few minutes(more than 10 minutes) when i checked, my device was in main screen and i was able to use it ..
I will flash the old ROM once i go back to home today.
And regarding entering into tri color bootloader,
I am using the mini usb cable ( not htc's usb cable) to connect my device to PC, and it works fine including sync,charging,storage etc
- i switch off my device
- connect my device to PC using MINI USB cable
- It automatically switches on the phone and goes to bootloader screen
PS: i do not press any button, not even power on button
Please some one confirm if this is normal behavior or only it is happening only with me ,
Regards
happy20b said:
Even im facing some issue with Energy's New ROM cookie 2.0 touch glass 0ct 14.
My cell got stuck when i was rebooting the cell. After that when i boot the cell it will get stuck at main screen (Touch Pro logo with red color Text). I left my device like that.After few minutes(more than 10 minutes) when i checked, my device was in main screen and i was able to use it ..
I will flash the old ROM once i go back to home today.
And regarding entering into tri color bootloader,
I am using the mini usb cable ( not htc's usb cable) to connect my device to PC, and it works fine including sync,charging,storage etc
- i switch off my device
- connect my device to PC using MINI USB cable
- It automatically switches on the phone and goes to bootloader screen
PS: i do not press any button, not even power on button
Please some one confirm if this is normal behavior or only it is happening only with me ,
Regards
Click to expand...
Click to collapse
i think its related to ROM. one 1st night, it started, but form last 2 days, i have kept it on for long time, but no result. will try again.
csmartly said:
i think its related to ROM. one 1st night, it started, but form last 2 days, i have kept it on for long time, but no result. will try again.
Click to expand...
Click to collapse
Al d best , Ryt now i hav flashed Energy GTX sense2.5 Rom and going smooth. try flashing other Roms.
Regards
happy20b said:
Al d best , Ryt now i hav flashed Energy GTX sense2.5 Rom and going smooth. try flashing other Roms.
Regards
Click to expand...
Click to collapse
no luck... nothing happens...
if i remove battery and put again, its not going to bootloader on connecting with pc. only it shows that battery is being charged by flashing on round button...
csmartly said:
no luck... nothing happens...
if i remove battery and put again, its not going to bootloader on connecting with pc. only it shows that battery is being charged by flashing on round button...
Click to expand...
Click to collapse
Hmm , r u using usb mini cable or extusb cable from htc ?
happy20b said:
Hmm , r u using usb mini cable or extusb cable from htc ?
Click to expand...
Click to collapse
i tried with mini usb cable provided by HTC and also other make mini usb cable. but no luck
Related
Hi Guys,
Need your advise, I've tried to reload the PDA Viet temp on my device so that I could reload the 4.0.0.6 ver again. The rom works great but some how on the 2nd day it start to be power draining on my 818Pro. was going to reload to play as plain before any apps installation to see if its apps issue and got stuck at boot loader.
Issue Now:
1. on running the device now it goes into boot loader and when connected.
2. doesnt seem to have any OS install and when Hard reset goes to bootloader too.
3.when try to load the ROMUpgradeUtility_NV_G4 fail to connect.
4. Now even when in Boot Loader Screen, the device goes on and off USB connection. making it impossible to transfer files to device.
Please Advise.
Thanks in advance
Try to push/hold camera, comm, and reset button, then release reset and comm but hold the camera, it will be go in the bootloader screen. At this point connect the usb cable and wait until the connection is done.
Are you sure your pda is G4?
thks some more light to the problem both hard and soft rests gives me bootloader but its turn on and off on the USB connection and last check on power is @ 90%
skyhigh75 said:
thks some more light to the problem both hard and soft rests gives me bootloader but its turn on and off on the USB connection and last check on power is @ 90%
Click to expand...
Click to collapse
Hi All,
Just like to encourrage all to be persistent on resolving the issue, think my issue had been resolve, not sure why the batt hard to be charge for bout 6-8hrs by Charger(not USB connection from Computer) almost like initial charge to be able to last through the step one downgrading to wm5.
Previously I charge for bout 4hr via charger and it didnt work, but since there's not new solution I persisted to charge for a longer time and rest before I try again and it work. Thanks for all's contribution the the solutions.
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/showpost.php?p=6707785&postcount=1 )...but[/url] with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india...
gdsbalaji said:
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india...
Click to expand...
Click to collapse
Wow, did you search? There is a thread right below yours with 13 comments for the same problem.
i did search for 2 days and tried the suggesting provided by the users...but nothing seem to work....i just need to get to the bootloader so that i can load a rom and move on to wp7....after task29...somehow hd2 never goes into bootloader screen...tried many times hoping for luck...still trying...
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
gdsbalaji said:
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
Click to expand...
Click to collapse
hey. how did you fix it?
mine is totally dead after flashing a non compatible rom, but i can revive it if I can go to bootloader
hanniabdin said:
hey. how did you fix it?
mine is totally dead after flashing a non compatible rom, but i can revive it if I can go to bootloader
Click to expand...
Click to collapse
With some more information, it was easily'r to help you.
Witch HD2 device do you have?
Witch stock ROM did you install?
Can you get access to bootloader?
SOLVED {bootloader dont load}
posted my the solution to my problem here.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
check it out...
________________________
thank me if this is useful.
kurt-willems said:
With some more information, it was easily'r to help you.
Witch HD2 device do you have?
Witch stock ROM did you install?
Can you get access to bootloader?
Click to expand...
Click to collapse
mine is t mobile hd2
I installed rom 2.01
I cann't got to bootloader and I can't eveing sync it with the windows. the windows just give sound but no sync. even the charging light will not turn on.
Hello
I have a problem with my X10 mini. Im trying to unlock its bootloader, but im stuck.
In the tutorial, it says that i have to turn my phone off. Im like, fine... But the phone turns on again by it self. Only happens when the USB is plugged in.
I cant continue installing CM7 until this problem is fixed.
I searched the forums, found one thread. But they were not on stock software and startet talking about coding..
Its updated to 2.1
4GB SD Card
No sim-card
-Oh, and it wont search for any updates btw.
Balano said:
Hello
I have a problem with my X10 mini. Im trying to unlock its bootloader, but im stuck.
In the tutorial, it says that i have to turn my phone off. Im like, fine... But the phone turns on again by it self. Only happens when the USB is plugged in.
I cant continue installing CM7 until this problem is fixed.
I searched the forums, found one thread. But they were not on stock software and startet talking about coding..
Its updated to 2.1
4GB SD Card
No sim-card
-Oh, and it wont search for any updates btw.
Click to expand...
Click to collapse
you need to turnoff your phone (WITHOUT USB PLUGGED IN !!!!)
SpyderX said:
2a. Turn off your phone. ---> not plugged in USB !!!!
2b. Open the directory you unzipped S1tool to and run S1tool.exe. Then, click on IDENTIFY button before proceeding to step 2c.
2c. Boot your phone into flash mode (make sure you installed Gordon's Gate found in step 1a first). All users, press and hold back button while connecting cable from PC to phone. Continue holding back button until you get some output. The LED on your phone should flash green if it is in flash mode.
Click to expand...
Click to collapse
booting into flash mod is plugging your phone while pressing back button (and stay pressed !)
so you don't need that your phnoe stays off while on USB... since the main thing is that he needs to startup with USB
If him post didn't help you try turning off, taking off the battery for 5-10 seconds, then put again and try again unlocking your bootloader
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
hi guys,
first, i know that the title is typical but i searched the the forum for my problem and i couldnt find any help so please hear me out!
i've been using xperia sola for over 5 months now and also been using the Ultimate V11 JB ROM, everything was ok till 2 days ago. at first it started with hanging and then restarting itself but now it still hangs at anywhere possible but it doesnt restart itself and none of the keys work so i cant hard reset it too!
i flashed it to stock rom, didnt work. tried the new NovaThor JB ROM and still nothing. the problem still exist.
now it wont turn on completely. tried with the another charger thing but i get a red light for 1 sec and then nothing.
plz help, its somewhat urgent!
ardalan1991 said:
hi guys,
first, i know that the title is typical but i searched the the forum for my problem and i couldnt find any help so please hear me out!
i've been using xperia sola for over 5 months now and also been using the Ultimate V11 JB ROM, everything was ok till 2 days ago. at first it started with hanging and then restarting itself but now it still hangs at anywhere possible but it doesnt restart itself and none of the keys work so i cant hard reset it too!
i flashed it to stock rom, didnt work. tried the new NovaThor JB ROM and still nothing. the problem still exist.
now it wont turn on completely. tried with the another charger thing but i get a red light for 1 sec and then nothing.
plz help, its somewhat urgent!
Click to expand...
Click to collapse
Now try to charge it full
If can't try to reflash the Stock ICS ROM
ardalan1991 said:
hi guys,
first, i know that the title is typical but i searched the the forum for my problem and i couldnt find any help so please hear me out!
i've been using xperia sola for over 5 months now and also been using the Ultimate V11 JB ROM, everything was ok till 2 days ago. at first it started with hanging and then restarting itself but now it still hangs at anywhere possible but it doesnt restart itself and none of the keys work so i cant hard reset it too!
i flashed it to stock rom, didnt work. tried the new NovaThor JB ROM and still nothing. the problem still exist.
now it wont turn on completely. tried with the another charger thing but i get a red light for 1 sec and then nothing.
plz help, its somewhat urgent!
Click to expand...
Click to collapse
only once the red light is blinking or it is continuously turning on when you are connecting the charger..if it is turning on then charge your mobile
for 3-4 hour..if that is not the case then try flashmode and fastboot mod..and when you are pressing power button are you getting any vibration??
if there above things dont work then your device may have hard bricked for which you have to take your device to service center...good luck
bibhu059 said:
only once the red light is blinking or it is continuously turning on when you are connecting the charger..if it is turning on then charge your mobile
for 3-4 hour..if that is not the case then try flashmode and fastboot mod..and when you are pressing power button are you getting any vibration??
if there above things dont work then your device may have hard bricked for which you have to take your device to service center...good luck
Click to expand...
Click to collapse
the red blinking light apears everytime i connect the charger, but for 1 sec. but now when i connect it to wall charger no red light but when i connect it to pc usb the red light apears and now it stays and doesnt go away. does this mean it is charging?!
how can i fix it with flashmode or fastboot?!
i dont think it is bricked because it was working fine 2 days ago and suddenly it started restarting!
then try to enter into flash mod by pressing the vloume down button and simultaneously connect the usb to the pc...if it is working then flash the stock ftf...if by connecting the cable to the phone through pc led is showing constantly then keep it remain like that for 3-4 hours..it might get charged.
bibhu059 said:
then try to enter into flash mod by pressing the vloume down button and simultaneously connect the usb to the pc...if it is working then flash the stock ftf...if by connecting the cable to the phone through pc led is showing constantly then keep it remain like that for 3-4 hours..it might get charged.
Click to expand...
Click to collapse
i tried the volume down thing but it didnt work, couldnt flash my phone.
i connect it to pc and the red light appears but it disappears after 10 minutes and i have to disconnect and then connect it again to get the red light!
its on the OS, could happen any time. Probably bootloop.
install flashtool
download ICS stock room
click the lightning on the flashtool and locate where you have put the ICS stock room.tft
hold down volume before connecting the cable to the phone.
then wait till the stockrom flash correctly.
-waiting feedback
skyfast said:
its on the OS, could happen any time. Probably bootloop.
install flashtool
download ICS stock room
click the lightning on the flashtool and locate where you have put the ICS stock room.tft
hold down volume before connecting the cable to the phone.
then wait till the stockrom flash correctly.
-waiting feedback
Click to expand...
Click to collapse
tnx but the problem is computer doesnt recognize the phone!
install first the driver, its in the flashtool
skyfast said:
install first the driver, its in the flashtool
Click to expand...
Click to collapse
it's not bcuz of the drivers. the phone doesnt even boot to be recognized!
ardalan1991 said:
it's not bcuz of the drivers. the phone doesnt even boot to be recognized!
Click to expand...
Click to collapse
its easy to recognize it, hold turn-off button and volume-up until 3 vibrations = force turn-off
if already turn-off
then hold volume-down before inserting the cable.
--feedback
skyfast said:
its easy to recognize it, hold turn-off button and volume-up until 3 vibrations = force turn-off
if already turn-off
then hold volume-down before inserting the cable.
--feedback
Click to expand...
Click to collapse
none of those buttons work! i hold the power off and the volume-up button but nothing happens!
the only thing thats working in my phone is the red LED light when i connect it to charger! although it disappears after 10-15 minutes and i have to disconnect and reconnect it again!
ardalan1991 said:
none of those buttons work! i hold the power off and the volume-up button but nothing happens!
the only thing thats working in my phone is the red LED light when i connect it to charger! although it disappears after 10-15 minutes and i have to disconnect and reconnect it again!
Click to expand...
Click to collapse
im sorry but your talking about the computer doesnt recognize your device lately, how will it recognize if it is connected to the charger and not on the PC
ardalan1991 said:
none of those buttons work! i hold the power off and the volume-up button but nothing happens!
the only thing thats working in my phone is the red LED light when i connect it to charger! although it disappears after 10-15 minutes and i have to disconnect and reconnect it again!
Click to expand...
Click to collapse
DUDEEEEEEE CALM DOWN AND LISTEN. THE FIRST SIGN OF AN XDA NOOB IS TO PANICK WHEN HIS/HER PHONE IS BRICKED.
Listen to the advice of @skyfast as what he said is completely correct. Try his suggestions and update us. Flash Mode will work regardless of what state. Hold volume down then connect the cable to enter flash mode.
Sent from my LT22i using xda premium
skyfast said:
im sorry but your talking about the computer doesnt recognize your device lately, how will it recognize if it is connected to the charger and not on the PC
Click to expand...
Click to collapse
WHAT!?! it's like you're talking chinese to me right now!
either i connect it to wall charger or pc the only thing i get is a red stable light which disappears after 10-15 min. and computer doesnt recognize the phone when i connect it to PC!
AndroidNoob69 said:
DUDEEEEEEE CALM DOWN AND LISTEN. THE FIRST SIGN OF AN XDA NOOB IS TO PANICK WHEN HIS/HER PHONE IS BRICKED.
Listen to the advice of @skyfast as what he said is completely correct. Try his suggestions and update us. Flash Mode will work regardless of what state. Hold volume down then connect the cable to enter flash mode.
Sent from my LT22i using xda premium
Click to expand...
Click to collapse
plz read my answers too! i said it before that i tried all the combo buttons and they dont work! my phone doesnt respond to any of them. i tired the PowerOff + Volume Up, the PowerOff + Volume Down, i tired connecting it to pc with both Volume Up and Volume down but none of them work!
i know that my sola is bricked and all i need to know is the correct and step by step way to fix it. plz!
You seem to have the same problem with @MegaSharkXDA
Sent from a JB Moonbreaker 3.5 device
http://forum.xda-developers.com/showthread.php?t=1849170
check here, hope you can fix your phone.
hey man you can wipe system data and dalvik and then formate system this happend for me once and then flash the ics stock so you can boot to ics and if you booted wait a while and then flash any custom rom you must wait cuz this time my sola was bootlooping if any custom kernel was seted up
wish i helped