Right chaps... so, here's the deal, I've done a SIM unlocker for the Sedna, if you want your device sorted, click this link:
http://sedna.htc-unlocks.com
Now... this also contains Hard-SPL; if you *DON'T* need a sim unlock, then just wait as I will be releasing the Hard-SPL here anyway.
if you do need a simunlock, use the link.
Good stuff!
we are receiving P6500 next week
When you say it's for Sedna,do you mean p6500 or p6550? Some call the
P6500 the 'Sirius' so I just want to check first. I have a P6500.
M.S
Same thing (well, as far as this is concerned anyway)
Right, so does this thing invalidate one's warranty?
that depends really... mainly on how badly you break the device.
if you don't break it badly enough to stop you from overwriting the Hard-SPL manually then you just replace it before RMA.
if you can't do that, it's unlikely they'll be able to discern you Hard-SPLd it
Does the SIM unlock still work if you overwrite the Hard-SPL?
Does the very fact of unlocking with this program affect the warranty?
yes, it works indefinitely no matter what you do.
and I already answered the warranty question.
go look up the term "warranty by law" and "warranty by manufacturer"
How much time to obtain the Unlocker?
Naturally, I paid ...
My p6500 now unlocked.
Just to say thanks, this has worked and I've now unlocked / debranded my orange p6500!
Many thanks.
Richard
@OliPro
Will you publish SSPL and HardSPL for SEDNA please?
Unlock
The unlocker has not worked on my Orange P6500
I have tried it twice without success.
i keep getting the message 'network locked' when I put a t-mobile simcard in to the device
Mysterious Stranger said:
Just to say thanks, this has worked and I've now unlocked / debranded my orange p6500!
Many thanks.
Richard
Click to expand...
Click to collapse
jonboy8841 said:
The unlocker has not worked on my Orange P6500
I have tried it twice without success.
i keep getting the message 'network locked' when I put a t-mobile simcard in to the device
Click to expand...
Click to collapse
drop me a message then and we'll see what's not working.
I've not yet encountered one that's worked because of the device; it's always been due to the user.
@Olipro/others:
I can buy the Spanish ROM P6500 from Expansys USA for about $100 less than the WWE ROM (EU) version...
Any reason whatsoever to NOT do this???
Thanks and best regards...
EDIT: Of course I would want to flash WWE ROM to it as my Spanish is a little rusty
nope, save the money and get the cheaper.
Which reminds me, I really should get around to Posting Hard-SPL at some point today.
Olipro said:
I've not yet encountered one that's worked because of the device; it's always been due to the user.
Click to expand...
Click to collapse
Au contraire. I can forward the PM's back to you if your memory is that short
Sorted in the end though. No, it wasn't my fault!
M.S
OliPro, Tnx for unlocker and fast replay ... tested with success on Orange P6500 ...
Thanks Olipro, followed your advice and it worked perfectly, i now have an unlocked and debranded p6500 for about 25% of the price orange charged
IT's not working for me
The hard SPL runs and clearly flashes the handset as it's then has the OliPro rom boot image when it goesto update the radio rom it then tells me it's 100% complete then says it's failed to flash the rom propperly and returns the phone to the coloured bars meaning i have to reflash the entire thing with an original rom to make the hand set work.
ANy help would be appreciated, it's a second gen orange 6500 if that helps which may mean they've mucked around with the network lock when they dropped the 6.1 release.
Hi,
Was the HardSPL ever released for this handset?
Related
Japanese ROM from DoCoMo hTc Z has been uploaded to XDA-Developers FTP and added to the Hermes wiki, you can find it under the Available Original Shipped ROM Versions.
Notes on this ROM:
ROM Version: 1.23.731.2 06/24/06
Radio Version: 1.06.00.10
Bootloader: 1.04
Language: JPN (Japanese)
CID: DOCOM801
As you can see this is nothing new, but I guess it will be useful for people with this CID to be able to downgrade to bootloader 1.04.
Enjoy
Hi pof,
Thanks for that. I tried this to flash my X01HT after unlocking it with imei-check but with no luck. RUU went successufully till the last screen and I hit the upgrade but it returned an error saying something like this RUU cannot be used for the device. Bootloader is now 1.04 and the device should be SuperCID with imei-check. The only thing I can think of is that I upgraded the radio to your 1.2. Would that screw SuperCID? I appreciate your advice in advance.
Thanks,
harryk
harryk1372: If you are in 1.04 bootloader just run the upgrade utility again without disconnecting the device or start the upgrade in bootloader mode to bypass CID checking.
If it is really SuperCID then you shouldn't have seen this error.
Hi pof,
Thanks very much for getting back to me so quickly.
I ran the upgrade in the bootloader mode. I thought that I don't have to run it twice if the device is already at the SuperCID state and didn't run the update twice. I'll try it again when the device is fully charged as the battery is now down to like 30%.
I'll post the result again when I am done. Thanks again for your prompt advice. You're the man and I really appreciate your efforts taking us thus far in cracking Hermes.
Regards,
harryk
Hi pof,
The device looks like it was not in the SuperCID state and RUU went fine with the second run with no error. However, the upgrade failed when it hit exactly 47% no matter how many times I tried it. Lucky that I did not brick my device but of course it seemed to lack some of the components and it did not even have the Connections setting to set up the Internet access. Also, AutoRun and cabs in the ExtRom didn't take any effect either although the cab files were there.
I decided to flash the TyTN ROM instead and that was successful. That is fine as I only use Japanese occasionally and I didn't really want the Japanese MUI so I will keep it as is. Perhaps I will tweak it a little to be able to use Japanese with loading the Chinese nls, Japanese font, Japanese IME and so forth just like I did with my Universal.
Thanks again.
harryk
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
fyi...
http://forum.xda-developers.com/showthread.php?t=283177&page=2&highlight=qtotter
I always downgrade my JASJAM using I-Mate shipped ROM
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
i use the docomo rom on my x01ht. it's ok. i have no problem with it at all.
a friend of mine uses a sim-unlocked x01ht (/w the original s/b rom) with sb_usim, but she does not get such a msg at all. do you use a s/b sim?? if yes, i suppsoe you did something wrong...
X01HT Unlocking Problem
I've got this X01HT a few days ago from S/B shop but when I tried unlocking it the result was no good using my cable. I read from other site that X01HT released from December 2006 cannot be unlocked. Please give me some clarifications on this and also, is FLASHING on lower rom version even in english version can resolve the problem...? Your response will so much appreciated.
Thanks in advance.
At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
To the experts, I need some advice. I intend to get a X01HT, already unlocked and flashed with the dopod 838 pro firmware. However, I intend to flash back the Japanese shipped rom :
RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip
What are the requirements esp where :
Bootloader (SPL)
Latest Radio Bootloader (HTC_BOOT)
Or since its unlocked, do I just go to the bootloader mode and flash direct? Any side effects if I do so, since its changing from an english rom of another clone (Dopod 838 pro, WM6)?
I am not even sure if the RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip rom is WM5/6. Please advice, thanks..
Thanks POF, my 8525 is unlocked, but I have gone through hell with Vista so just to let you all know that "don't try these upgrades on VISTA".
I have read many posts and finally got it to unlock. In any case, here is what I did (on a XP box with activeSYNC 4.2 - it is running all the time for each of the steps below):
1) on XP, connect the phone to XP and make sure ActiveSync see the phone. Run the exe in 1.30 ROM for Cingular to download the SPL to 1.04. After this the phone will reboot/restart itself.
2a) On XP, with ActiveSync running and connected, run POF's MaUpgradeUt_noID.exe within the unlocker v2a xip file to upgrade the radio to version 1.16. If it fails with ERROR 114, go to step (3); else go to step (2b).
2b) If the first time failed, DON'T TOUCH THE PHONE. Run the exe again and the second time should run fine. There is a 114 error at the end and it is OK. Once you get the 114 error, soft-reset the phone before next step.
3) On the phone, flash with POF's unlocker (v2a) ON THE PHONE MEMORY HERM_Unlock_v2a.exe (in the zip file same as above download for unlock v2a). There is a success notice at the end.
That is it. Hope this help someone.
Andy
And what about the CID matching
Good for you! Tomorrow I´ll be picking up my 8525 and I´am anxious to unlock it and strat using it, in preparation I´ve been reading throughout the forum and looks for me that it was very simple for you (except for the issues caused by Vista). I was wondering if you had to check the CID in your device or if you just went blind into the procedure regardless the CID inconveniences?
Why don't 8525 users simply call cingular for the subsidy unlock code? Its cleaner, faster, and there is no risk to brick'ing your phone.
I really don't get it.
Just followed your steps and it worked for me as well. The first time I ran MaUpgradeUt_noID it failed with a 112 country code. But like you said, run it the second time and it worked.
Just popped my tmobile sim in and am going to install blackberry connect because that sim has by BES enabled and see what happens
Thanks much!!
wimpy said:
Why don't 8525 users simply call cingular for the subsidy unlock code? Its cleaner, faster, and there is no risk to brick'ing your phone.
I really don't get it.
Click to expand...
Click to collapse
I asked the rep in the cingular store, they lie to me, telling me just call the 611 customer support number and they will unlock me. So, it is a company phone and I said fine.
I have been cingular for years and I will definitely switch to TMOBILE once this expire! I had tmobile before and they just require me to be with them for 90 days before I call.
About the 611 call, they ask me to join the $6.99/mo global travelling plan.
MacGuruTX said:
Just followed your steps and it worked for me as well. The first time I ran MaUpgradeUt_noID it failed with a 112 country code. But like you said, run it the second time and it worked.
Just popped my tmobile sim in and am going to install blackberry connect because that sim has by BES enabled and see what happens
Thanks much!!
Click to expand...
Click to collapse
I have SIM from all the places I have been to and once a non-singular SIM inserted into the phone, there is a pop-up a screen asking for UNLOCK CODE.
andykwg said:
I asked the rep in the cingular store, they lie to me, telling me just call the 611 customer support number and they will unlock me. So, it is a company phone and I said fine.
I have been cingular for years and I will definitely switch to TMOBILE once this expire! I had tmobile before and they just require me to be with them for 90 days before I call.
About the 611 call, they ask me to join the $6.99/mo global travelling plan.
Click to expand...
Click to collapse
All you have to say is you're travelling outside the United States and wish to use the phone with a different sim. They will do it right there and then, or they will log a ticket to have some other group do it. It can be had instantly, just a matter of whether the rep you talk to have access to that system. The unlock code is based off of your IMEI number.
I think there is a number in the wiki page that connects you directly to their roaming group of some sort. I just dialed 611 and they emailed it to me the next day without any additional plan.
You'll simply roam on other carrier if cingular network isn't found.
wimpy said:
All you have to say is you're travelling outside the United States and wish to use the phone with a different sim. They will do it right there and then, or they will log a ticket to have some other group do it. It can be had instantly, just a matter of whether the rep you talk to have access to that system. The unlock code is based off of your IMEI number.
I think there is a number in the wiki page that connects you directly to their roaming group of some sort. I just dialed 611 and they emailed it to me the next day without any additional plan.
You'll simply roam on other carrier if cingular network isn't found.
Click to expand...
Click to collapse
That is what exactly I said.... I have 3 other phones with Cingular before and they all unlocked the same way. I think they just mess up on this one this time.
hey ya'll, so I followed these steps and everything works except for now, the backlight on the slideout keyboard no longer turns on -- any suggestions on what to do now?
no cingular unlock code can SuperCID your 8525 however...
I worked for me
andykwg : Thank You!
Having your post as a starting point and after a lot of reading through out the threads I suceed to unlock my 8525 spl 1.06.
I found a couple of issues during the unlock
1.- After 2% progress I got an Error # 262 (Update Error) so I had to get into the recovery procedure, but it was very easy and finally I downgraded to ROM 1.30.502.1
2.- During the Radio Patch flash I got the Error # 120 (Country Error), but as you instructed I only had to rerun the exe and at the end I got the expected Error # 114
Thnk you and pof, I guess I wouldn´t dare if I had read your post.....
I see that you can't do this in VISTA.
Has anyone tried in Windows XP x64 yet?
Thanks,
-J
RUU.dll error when I run MaUpgradeUt_noID.exe
So I downgraded from SPL 1.06 to SPL 1.04
I syched.
I tried to run MaUpgradeUt_noID.exe and I get this error:
"This application has failed to start because RUU.dll was not found. Re-intalling the application may fix this problem.
I searched the threads looking for this error with no luck. What am I doing wrong?
Thanks,
8525 owner running XP Pro
wimpy said:
Why don't 8525 users simply call cingular for the subsidy unlock code? Its cleaner, faster, and there is no risk to brick'ing your phone.
I really don't get it.
Click to expand...
Click to collapse
I don't think You get SuperCID that way do you?
8525 owner said:
So I downgraded from SPL 1.06 to SPL 1.04
I syched.
I tried to run MaUpgradeUt_noID.exe and I get this error:
"This application has failed to start because RUU.dll was not found. Re-intalling the application may fix this problem.
I searched the threads looking for this error with no luck. What am I doing wrong?
Thanks,
8525 owner running XP Pro
Click to expand...
Click to collapse
SAME here... Please HELP ASAP!
For those with errors please ensure your rom firmware and you follow the steps to the letter.
I love my 8525 i just wish they gave a cover, it gets messy on the screen.
Worked for me as well.
Thanks! Followed your instructions to the letter, now mine is unlocked and superCID! No issues and running T-Mobile now.
country code error, what next?
Need a bit of help here. I downgrade successfully my 8525 from 1.06-->1.04 but when i tried to run the map****.ID.exe i continue to get country code error 120.
I must have done this at least three time and still no luck, what next can i try?
DishXpert
dishxpert said:
Need a bit of help here. I downgrade successfully my 8525 from 1.06-->1.04 but when i tried to run the map****.ID.exe i continue to get country code error 120.
I must have done this at least three time and still no luck, what next can i try?
DishXpert
Click to expand...
Click to collapse
You are not SuperCID.
Run the new Pof unlocker/SUPERCID version 3.
Hi everyone,my name's Larry and I just registered to the forums. Please forgive my newness but I am in a bit of a pickle here.
I have a MDA Vario II, aka Hermes 300, that I bought s/h off ebay. Works fine,no worries, but I upgraded to WM6 because i felt browsing was a little slow and the screen graphics werent as good as I expected. The upgrade was from the T-mobile site itself and all went fine. Only thing is I dont believe this phone can handle it(needs more RAM really) and after being online a while it gets really slow,like steerig a cow through treacle at times so I came to the conclusiong it was a bad move! Now I've noticed a link on here about downgrading to WM5 but is it that easy for one with no specialised tools or knowledge(tho i did build my own PC, or should I say ahem WE did)
Also a problem the phone has developed since the upgrade is it keep deleting my email settings, even tho on the 'desktop' screen it tells me i have so many unread emails in each account! So now i cant check emails from it either!
I do hope I can sort this out cos it is really frustrating having a PDA and not being able to browse properly!
Many thanks
Larry
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
scousemartin said:
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
Click to expand...
Click to collapse
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Hermes300 said:
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Click to expand...
Click to collapse
all your question answered here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have looked thru the wiki and cannot find the advice I need.
My device has the following on it and what I would like to know is if I can actually drowngrade the device back to WM5.
The rom version is 3.60.110.4 (T-mobile UK)
The radio version is 1.50.00.00 so I assume that it is boot 0108.
The IPL is 1.04 and the SPL 2.03.
The protocol reads as follows 32.83.7020.20H
I have come across a guide that states if the radio is above 1.27.00.00 then downgrading may not be possible.
"(NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.)" -http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
The other question I would like to ask is this - it is possible to put another verion of WM6 on with this radio version?
Thanks for any advice!
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Hermes300 said:
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Click to expand...
Click to collapse
I think you might not have gotten help 'cause it doesn't look like you've read what people pointed for you to read. Hopefully this'll help you get over the jargon hump and make progress. Having upgraded from the Offical T-Moble rom and swapped ROMs, it's definitely worth taking the time to learn how to do.
SIM unlock & CID unlock aren't the same.
If you've had you phone with T-Mobile for at least 3 month they will let Unlock you SIM (at least they do in the US). Contact them directly, you'll need an active account & phone number with them. This is free.
CID unlocking allows flashing ROMs onto your PDA. For some reason the folks at T-mobile, etc want you to have to look at their stuff every time you use a machine you bought through them. Using a cooked rom is like reinstalling XP without having AOL on your computer, makes life much better.
(flashing = installing to a PDA's Read Only Memory)
(ROM = OS + Radio + other stuff = basically everything thats on the PDA after a hard reset)
Flashing can be a dangerous thing, you don't want to 'brick' your PDA so you install an escape hatch. Hard SPL is that escape hatch.
(Brick = peice of baked clay = your PDA if a ROM install fails and you didn't install Hard SPL first)
The Hard SPL protects you if the ROM you installs fails 'cause power went out, ROM was bad, you bumped the cable, etc
http://forum.xda-developers.com/showthread.php?t=296722
Read & Follow the directions.
Select a ROM from here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I have the same model & just installed Custel V2.5, seems to work well so far (day 2).
http://forum.xda-developers.com/showthread.php?t=364617
Good Luck
Thanks gt, and we have read advice on here but a lot of seems to be conflicting plus we seem to be just going round and round. Yep, ben there, yep read that etc.
I know the diff. between SIM and CID unlock but all I want to know is is it necessary to SIM unlock the phone to update a ROM?
I wont be using another network but will be staying with T-mobile W n W.
I did it!
Well I did it. flashed the phone with Schaps WM6 4.30 WWE.
Have noticed it runs faster than the previous T-Mobile WM6 and has some really neat features-you can adjust a lot more settings on the phone than before,quite impresed! Thanks for everyones help!
I must be thick as I have read more posts on this than I have had hot dinners and tried various utilities all to no avail although thankfully my Wizard still seems to work.
My O2 XDA-Mini s is about 2 years old and of course locked to O2 although the device come up as SIM Unlocked but CID Locked.
IPL - 2.21.0001
SPL - 2.21.0001
I am now on the Three network and would just like to get back to using the phone I love rather than the freebie I have now, so I am assuming I need to get CID Unlocked?
Having bothered to get to that stage I would want to scrap the O2 software and upgrade to a better ROM.
Sorry for being so stupid on this, I am hoping someone in the know can take the time to reply.
Thanks in advance
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
CID is only used for flashing, so if you want to upgrade to the better WM6 roms now available, you'd have to unlock it permanently (hard SPL) or use the Soft SPL.
Good luck,
EquinoXe
the-equinoxe said:
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
EquinoXe
Click to expand...
Click to collapse
Thanks for taking time to reply EquinoXe, you have confirmed what I had already thought.
The device reports "Invalid or missing SIM card" with the Three SIM card and WST v4.2.2 reports "Your phone is already SIM unlocked" ??
I do wan't to upgrade the ROM but more importantly I want to get the thing working with the Three SIM card, then I can worry about the ROM.
Any other suggestions will be gladly received.
Thanks in Advance
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
ashasaur said:
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
Click to expand...
Click to collapse
I have done this twice just recently but my G4 is not asking me to enter any unlock code. I read other threads where people had similar problems so tried a few times, device still comes up "Invalid or missing SIM card"
I ran EnableRapi from the device before running the batch file so I'm not sure what is going on or if it is something quirky about the G4 device??
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jackson>cd\
C:\>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ¨~äe├ÇÔ►-┴«p¦╚.;
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Strange, according to lokiwiz (and WST) you are sim- unlocked.
But clearly your three sim card won't be accepted.
I do remember that HTC had been messing with the bootloaders, had to downgrade one in order to unlock it too..
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
Just ignore the carrier ROMs, and only update (downgrade) the IPL/SPL with one attached to djharvey's thread (preferably the orange, because that one worked for me).
Flashing bootloaders can damage your device beyond repair, please use this method only if you are shure about the process, and know what you are doing. I am not responseble or liable for any damages.
Flash the IPL/SPL (takes a minute), then try again to unlock the phone.
Note: WM6.x needs IPL/SPL 2.19.xxxxx at least (works great with a 2.19), so if you have downgraded to a lower number, you'd have to upgrade again in order to run WM6.x .
Good luck,
EquinoXe
Same Problem
I have the same problem as the previous post. I downgraded from WM6.1 to a WM5.1 ROM and then ran lokiwiz - success!
I have now gone back to the original WM6.1 ROM and again I am locked out from my o2 SIM.
I am using: WM6.1 ROM Prophet My Green Edition http://forum.xda-developers.com/showthread.php?p=2116170
Any suggestions?
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.47.21
OS 5.2.19.209
the-equinoxe said:
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
EquinoXe
Click to expand...
Click to collapse
Thanks EquinoXe, I am going to try a T-Mobile, Vodaphone and Orange SIM later to see what results then maybe tomorrow try your last suggestion.
Thanks and I will post any results, hopefully not a flashy paperweight (~:
------------------------------
I have now tried T-Mobile, Vodaphone and Orange SIM cards in the Wizard and all work OK so unlocking was never the problem, obviously O2 is OK also as this was it's original branding.
So the problem is only with the Three SIM, I have an old T610 and T630 which I just put the Three SIM into with the same results.
Need to do a bit more reading on this but I thought this sort of restrictive trading practice went out with the monopolies issues, as it seems at the end of my contract it's not just a matter of me buying a phone of my choice, if I want a new handset I have to go with Three, who interestingly don't do XDA style phones, or change contracts.
More if it happens.
I'm guessing that the reason the 3 sim card won't work is because the Mini S isn't a 3G capable device - 3 is the only network in the UK that's 3G exclusive, hense why other (T-mobile, Vodafone, O2 and Orange) sims will work and the 3 sim card won't.
Hope this helps.
Hi folks! Please help me! I killed tons of nerves because of this phone!
So here is my sad story. 1 Year ago i bought second hand HTC HD2. Seller told me that phone is locked to T-mobile(Not US one!! UK one!! Transaction was held in UK). After I got phone I rushed home to install Android and I was successful at this point. Then I bought a unlock code from ebay, so I Finally could make phone calls. Then I realized that the only way I can insert code is putting back WM 6.5. And here the worst part starts. I read hundreds of manuals but still was unsuccessful. I downloaded many official WM 6.5 ROM installers but they didn't flash my phone. They just got stuck at 0% and error pops up. I was trying it for a week and then I just raged and put phone to the shelf and was waiting til I get will power to start over again.
I hear that every phone needs its own ROM installer for particular region and operator but I couldn't find UK T-mobile ROM so used many others and it didn't help.
I also heard that by IMEI it is possible to find to what operator the phone is locked(just to check if seller didn't lie me) but again I didn't manage to do so.
Here is my IMEI 354120035834066
Please experts help me, little nooby, with this horrible situation.
thank you
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
samsamuel said:
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
Click to expand...
Click to collapse
Thank you, but always when I am trying yo install HSPL4 critical error comes up. I think it comes up because I have spl 2.1000000 which should be 2.08 I found information that in order to downgrade to 2.08 I need to flash official ROM. But when I am trying to do so it is always stuck on 0%...
I am so $%^& up ...
any ideas?.... thx
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Mister B said:
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Click to expand...
Click to collapse
Hi. Thanks for ROM, but still.. got stuck on 0% and doesn't go further..
When I try to install HSPL4 it always gives me critical error...
Fixed my problem. Now everything works fine!! Thank you very much guys!!
how ??
rom4eg said:
Fixed my problem. Now everything works fine!! Thank you very much guys!!
Click to expand...
Click to collapse
explain