Need to go back to factory SPL for warranty - Advantage X7500, MDA Ameo ROM Development

My micro drive has issues, I am unable to copy anything to it reliably anymore, even MP3's are impossible, it seems to go off line and become unavailable.
I want to get it repaired under warranty but I am stuck at SPL 3.5, is there any way to flash back to the factory SPL and OS?
Or does anyone have any ideas on making the microdrive work properly again?
G

Have you tried WM6 SPL 3.5 from this link?
5-21-08 UPDATE!! AP4 VANILLA 4 SPL1.2 Windows Mobile 6.1 for spl 1.2 and 3.5
http://forum.xda-developers.com/showthread.php?t=390328

downgrade to original rom
GuardianZX9 said:
My micro drive has issues, I am unable to copy anything to it reliably anymore, even MP3's are impossible, it seems to go off line and become unavailable.
I want to get it repaired under warranty but I am stuck at SPL 3.5, is there any way to flash back to the factory SPL and OS?
Or does anyone have any ideas on making the microdrive work properly again?
G
Click to expand...
Click to collapse
U can try this
http://htc-hackers.com/uploads/ap3newspl.zip...

niceboyyy said:
Have you tried WM6 SPL 3.5 from this link?
5-21-08 UPDATE!! AP4 VANILLA 4 SPL1.2 Windows Mobile 6.1 for spl 1.2 and 3.5
http://forum.xda-developers.com/showthread.php?t=390328
Click to expand...
Click to collapse
Beware! this do not change back once you had the 3.5 version.

SPL3.5 is a one way ticket.

I will try a hard reset again, The last lite version I loaded was based on the TMobile rom and seemed buggy to me.
Has anyone else had this microdrive issue? The drive works if there is very little on it, once I get to 3Gig or more of data the drive access times slow to a crawl, from 1500kbps writes to 10kbps. I am assuming the drive is dying or dead, I tried a format from the control panel applet, I also tried the recover microdrive, same issues. I also tried WM5Storage and formatting from within windows, still no luck.
I was going to try to go back to AP4, but once I loaded AP3Touch SPL3.5 I am unable to go back to AP4.
any ideas?

You might try downloading pocket mechanic and running scandisk and then format. I believe it has a trial.
www.wizcode.com
It has worked for me on the microdrive.

@GuardianZX9
Try flashing te ndh file of AP4 with the flashloader of one of the irus roms. It worked for me.
QAN

How do I get the nbh out of the AthenaUpdater.exe?

GuardianZX9 said:
How do I get the nbh out of the AthenaUpdater.exe?
Click to expand...
Click to collapse
when you run the .exe it unpacks all the usual NBH/RUU files to a temp folder on your computer, after it has brought up the first config screen do a search on your computer for NBH files ! (dont forget to tick the boxes that lets it search in hidden, system, and sub-folders under the advanced tab)

ice_coffee said:
when you run the .exe it unpacks all the usual NBH/RUU files to a temp folder on your computer, after it has brought up the first config screen do a search on your computer for NBH files ! (dont forget to tick the boxes that lets it search in hidden, system, and sub-folders under the advanced tab)
Click to expand...
Click to collapse
I am not sure that the team wanted this widely known.
?modify post

lakeman said:
I am not sure that the team wanted this widely known.
?modify post
Click to expand...
Click to collapse
Actually it's common knowledge.

moritz.narnhammer said:
Actually it's common knowledge.
Click to expand...
Click to collapse
Yes...yes it is :\

It's new to me, something to do coming week end. Thanks.

Related

WM2k5_1.50g_XDA2_HIMALAYA.rar

Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
keithhiap said:
Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
Click to expand...
Click to collapse
WM2k5_1.50g_XDA2_HIMALAYA.rar :shock:
to my knowledge g could be newer than f the one in the full ram version, so this potantially could be newer, as for the files ms & radio they have to be in the same folder as NK, regarding the protocol i have no idea what do you mean so please explain further
Basically, i am trying to claify by comparing WM2003SE files.
You see, when you extract WM2003SE, you will see 3 files (MS, NK and radio) right?
And in WM2005, you only see 1 (NK).
So, by my understanding, there is no Radio, and MS(in this case, this is protocol) in WM2005
Does it means that do i need to copy Radio 1.7 FTP: xda:xda and (MS) from WM2003SE into WM2005 folder?
pardon my english.
i see the screenshot for WM2005, and it has the radio 1.7 and protocol 1337.38
this really confusing me
Also reading the upgrading procedure. is just use patch 1, patching the NK files
then use ERedit and change the operator
this leads me that this file is only for OS.
So, as for radio and protocol (here i means , MS and radio), it is copy individual from different files and place it into the folder WM2005(here i mean going to upgrade)
thanks
by the way, this file WM2k5_1.50g_XDA2_HIMALAYA.rar is only 6.08MB, which is smaller then WM2k5_XDA2_HIMALAYA_O2_FullRAM (23MB)
Huh, I downloaded it and my rar file was 23695Kb, the extracted NK.nbf was 32769Kb.
I need my device at the moment so I dare not risk the upgrade at the moment. If anyone has performed the upgrade please post a line if it was successful.
cheers
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Buzz,
what are the enhancements done on it ?
Btw thanks you for the hard work once again...
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Thnx Buzz, I just did the upgrade, no problems.. seems more stable... at least after running it for 5 minutes :wink:
Changes.log
Buzz,
Great and awesome work as usual
Just wondering if you can post a changes log or something so we can see any updates / changes you guru's have made
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
eloco said:
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
Click to expand...
Click to collapse
It's the internal storage eloco... Storage Cards ramain the same.
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount........... :?:
Perhaps are there some additional steps to do?
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount...
Click to expand...
Click to collapse
just flashed mine & memory is showing 62.00 for Storage and 56.34 for Program. I can live with 118 if this this image stops sucking my battery dry.
Can you list the differences/improvements?
Is the NAND Disk renaming to Sotrage the only change?
Can you list the differences/improvements?
Click to expand...
Click to collapse
I'm still waiting to see an improvement. Even with the slightly newer kernel I still see my battery dropping approx 1% per hour. Maybe that's OK, but with my radio, BT, and IR off I think it should do better than a 25% / day drop. If my radio was on, for 8-12 hours then 25% (maybe 40%) makes sense. I do notice that ActiveSync seems to load itself periodically (which I never saw using WM2K3SE), and I assume my serial port is being energized whenever AS loads. This could account for the power drop, but I'm still observing it. I haven't seen anything I could point to as an improvement.
I was hoping to see an improved video camera and working SMSs... :wink:
Oh well, I'm willing to wait whatever time necessary for better and better releases of BuzzMobile5.0
WoW another version from Buzz.... Buzz can u please whats the diff between the old and the new pls..
i've upgrade my xda with 1.50g, it works just great, with more stability on my device, but still with the minor bug (camera, and record button). i can see the program memory is bigger than the 1.50f, so i can open the 3mb excel file freely. now i can use the wisbar advance 2 without a bug, i think....
gadz, or anybody else with WM5, have you tried Wisbar 2.10.0.29 ? When I tried to run it, it would lock up until I renamed lrgwesex.dll. I'm also experience small graphic hic-ups, is anyone else?
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1977&start=15

How to: upgrade to WM6 without a PC!

It is possible - I've just done it. I'm away from home and I've been using my Hermes (with WM5 AKU 3.3) to get my iBook online all week. Finally WM6 has appeared but I'm stuck with no Windows PC to perform the upgrade...but XDA-Developers gave me all I needed to do it. Here's the outline of how to do it (you'll need to figure out some finer details yourself, but I will help where possible if you get stuck).
1) You need just the .nbh file from the WM6 package of your choice. Unfortunately they are built into Windows installers. I downloaded XDA-Live and extracted the .nbh file using Virtual PC.
2)
i) Backup your storage card.
ii) Format your storage card. (I used a program called "Storage Tools" for this).
ii) Rename the WM6 .nbh file to HERMIMG.nbh and copy it to the root of the empty storage card.
3) Get Des' SSPL program from this link:
http://forum.xda-developers.com/attachment.php?attachmentid=34184&d=1171162518
4) Put the SSPL executable on your phone and run it. Cross your fingers. The phone should enter the bootloader and offer to upgrade the OS using the image it finds on the storage card.
And that's it. Once I'd figured this out, the method is straighforward. The part that has taken me all day is getting the image file extracted from a Windows world and onto a blank storage card using only a Mac and the phone itself (and no other internet connection)!
Hope this is useful to someone else.
Edit: typo.
Great! This method is much safe than other methods that depends on USB because you don't have to worry about someone unplug the USB cable, or if the PC will hang during the flashing process.
Maybe the only thing to check is to ensure that the device to have enough battery for flashing
BTW, how long will it takes for this SD upgrade method?
Brilliant!
Very ingenious solution! I'm not ready to flash yet, I want to see some bugs worked out of the WM6, but when I'm ready will probably try it your way just to see how it works!
Ben
Awesome, I'm using Vista, and I don't want to install XP just to flash Thank you.
Will this work with the Universal? I'm getting Vista soon and I want to be able to reflash if I need to.
Thanks in advance.
ahlok_hk said:
BTW, how long will it takes for this SD upgrade method?
Click to expand...
Click to collapse
I didn't time it but I'd guess it only took about 5 minutes.
You CAN flash on Vista using regular ROM updaters (the .EXEs). That's how I upgraded to AKU 3.3 recently (I don't have an XP machine either).
You do it by connecting in bootloader mode so that "HTC USB Sync" appears in Vista's Device Manager. Then you replace that driver with the one from 2004 (I got mine off the CD that came with the phone). Then the ROM updater works
Now is there a way to exec the sspl.exe on boot? So that some of the bricked users can jump start into bootloader and flash any rom.
unfortunately not... sspl is a wince EXE.
Radio ROMS's
Does anyone know if the Radio only ROM's can be flashed by this method also. If you can do you name the .nbh file the same or use a different name.
You can flash any NBH file, radio os or whatever. But not extracted radio roms in NBF, only in NBH. The file must be named HERMIMG.nbh.
pof said:
You can flash any NBH file, radio os or whatever. But not extracted radio roms in NBF, only in NBH. The file must be named HERMIMG.nbh.
Click to expand...
Click to collapse
interesting... does that include unsigned updates??
walshieau said:
interesting... does that include unsigned updates??
Click to expand...
Click to collapse
Yes, but only with SSPL.... not with the real SPL on device.
pof said:
Yes, but only with SSPL.... not with the real SPL on device.
Click to expand...
Click to collapse
ok now back to the drawing board then... do you know whether the SPL can be forced into Service mode via the RomUpgradeUT.exe file... have been doing some digging around in the DLL's and EXE and found some info about a 'Service' mode....
walshieau said:
do you know whether the SPL can be forced into Service mode via the RomUpgradeUT.exe file... have been doing some digging around in the DLL's and EXE and found some info about a 'Service' mode....
Click to expand...
Click to collapse
Not sure if I understand your question.... the so called "service mode" is what we call "booltoader mode" or "tri-color screen".... just the same.
On normal RUU, the bootloader mode is invoked by EnterBootloader.exe, on custom RUU EnterBootloader.exe file has been replaced with SSPL-HERM.exe.
pof said:
Not sure if I understand your question.... the so called "service mode" is what we call "booltoader mode" or "tri-color screen".... just the same.
On normal RUU, the bootloader mode is invoked by EnterBootloader.exe, on custom RUU EnterBootloader.exe file has been replaced with SSPL-HERM.exe.
Click to expand...
Click to collapse
yes i know that BootLoader is a type of Service mode... i was talking about a different procedure... it looks like a command from the RomUpgradeUT file to signal the bootloader to just to flash the ROM and not check the RUU sig's, model type etc....
walshieau said:
i was talking about a different procedure... it looks like a command from the RomUpgradeUT file to signal the bootloader to just to flash the ROM and not check the RUU sig's, model type etc....
Click to expand...
Click to collapse
That's not possible with the normal IPL+SPL on device, load them on IDA Pro and you'll see what it exactly does, its small enough to follow all the disassembled code with the samsung manual in hand.
so......if i want to flash both radio and wm6,
all i have to do .. is to extract the nbh file from .exe using winrar or something and rename it, put it into a formated sd card.. and run the sspl thing and do the same for wm6 ?
yes hellokittyr, that's right.
Hi pof,
have you tried to digg into the radio ROM as well? Probably with the right manual in hand one could seperate the RBL from the rest and create a 1.35.00.11 radio ROM with RBL 0107.

First time upgrading- please provide input!!!

Ok gang i have been lurking around for a while and im finally deciding to upgrade my phone. for my short background, i have done this on my old magician (once) and a friends t-mobile magician (once) as well, but now i want all the new gadgets and speed for my hermes. for the record i am currently a Cingular/ATT customer living in Orlando, FL where there is great 3G coverage.
here is what i have:
herm100
ipl 1.01
spl 1.06
ROM version 1.34.502.1
ROM date 09/21/06
Radio version 1.16.00.00
Protocol version 32.53.70.18.01H (i am not sure what this one means though...)
here is what i am planning to do (in the exact order of which i will run them so if my order isnt right please tell me):
HTC_Hermes_SIM_CID_Unlock_v3a
Hard-SPL-V7.rar package
HERM_Radinly_1.43.00.00_CustomRUU.rar (unless anyone thinks the 46 or 47 version would be better for ATT in my area)
Hermes_WM6_WWE_vp3G_v2.0_ATT.rar
CVSD_1.2_061226.rar
HomePlugIn_1.6.0.0.rar
vp3G_v2.0_CommManager.rar *edit* (yes i know the comm manager must be closed for this one too) *edit*
vp3G_v2.0_StreamingMedia_PATCH.rar
XM_Radio.rar (may install this later)
MobiTV .rar (may install this later)
TCPMP_v0.72RC1.exe
ac3.plugin.0.72RC1.rar
flac.plugin.0.72RC1.rar
ffmpeg.plugin.0.72RC1.rar
vorbislq.plugin.0.72RC1.rar
and that should be it i hope!!!! also, i think i remember needing a codec to play xvids through tcpmp but i cannot find anything that i have archived on my computer... so if anyone has that please let me know.
if there are any other precautionary measures that i can take PLEASE let me know. i 'somewhat' understand how the hardspl works, is that the only protection i have? should i clear up my phones memory? i doubt there is anything like a 'scandisk' or anything for the type of memory the phone uses but i just want to be 1000000% sure that this flash will be successful thats all. thanks guys up front for a great community and any help is GREATLY appreciated.
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Madcap180 said:
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Click to expand...
Click to collapse
No do the unlocker first...it loads HardSPL (1.40.oli) onto the device....it will downgrade the SPL if you run it second.
Once that is done...load HardSPLv7 onto it.
Then follow the list you said.
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
beppomarx said:
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
Click to expand...
Click to collapse
OK.....i will answer these qs but you do need to read the wiki so you DEFINATLY understand the different aspects of the hermes...
The device can be downgraded to normal (like factory settings)....see the guides in my sig for more info.
Overclocking....dont even bother...the restriction is in the ROM....later ROMs use the cpu much better.
If you want to backup contacts etc...either use PIMBackup (search this forum for it) or get an exchange account which will sync contacts/emails/tasks etc..
the IPL is still 1.01, can this be upgraded or does it not make a difference?
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
beppomarx said:
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Click to expand...
Click to collapse
You need to install ALL the latest .net framework packages from Microsoft on your PC, the file is meant to run on your pc NOT your hermes.
you guys are the best and so is this site!!!
last question...
i downloaded the 'vp3G's WM6 v2.0' ROM and added the patch for 'vp3G_v2.0_StreamingMedia_PATCH.cab ' but i still cannot watch videos on youtube or any site of the likes? the page gives me an error saying 'Hello, you either have Javascript turned off or an old version of Macromedia's Flash Player. Get the latest Flash player.'
i cannot find java or macromedia that works on windows mobile... what can i use??? i am finding some stuff on javaME but nothing i can comprehend or download...
lol, when I tried to do the Unlocker first it temp-bricked my phone.. I had to reflash old rom, then run hardspl then the unlocker in that order.
Use google and search for 'Flash Player for Pocket PC'
it will give you the link to Adobe Flash Player

WM5torage or Card Export w/ New Rom

Can anyone confirm or deny that either of the two programs work with the brand new rom?
They didn't with 3.27. There also is a newer version of Card Export out now.
Still not working for me on the official 3.35 ROM. I'd love to get this fixed. That was an essential feature for me and it sucks not having it.
Were you referring to Card Export II 3.08 or WM5torage?
both....
I was running Card Export 3.06, so when I saw your post I was hoping 3.08 would work. Installed it and still no love. This sucks.
Edit: I submitted a bug report at Softick's website. Here's hoping for a resolution
WM5torage 1.75 works with the new rom.
Not working for me. Did you do anything special? What ROM are you running? I'm on the official Sprint 3.35 release.
Also posted at PPCGeeks,
For those interested in Card Export/WM5torage:
I don't know about everyone else, but the ability to use my phone as a flash drive for transfering files is a huge advantage for me. Activesynce/WMDC blows, and is not installed on every computer. Since the update to 3.XX ROMs, neither of these programs has worked (at least for me). I've been in touch with Softick (makers of Card Export) and I think we will have a solution soon. I've run some debug programs for them and they have developed a working version. Not sure when the final release will be, but hopefully soon. I was amazed at how responsive their team was. The day after I emailed them, the developer was in contact with me. I ran some debug programs, and the next day he had a working test version for me to try. Really awesome to see them working that quickly to develop a fix. If I hear anything about the final release I'll post again. Just thought some people might want to know.
atomclock said:
WM5torage 1.75 works with the new rom.
Click to expand...
Click to collapse
is this inaccurate information??
i have both working on dcd 3.01 rom with the new 3.35 radio. I also discovered a way to unhide the extrom in dcd's kitchen and without the bug that happens when u follow this links suggestion : http://forum.xda-developers.com/show...ghlight=EXTRom
I have the phone recognize my extrom as a Mounted Volume or a harddrive for a lack of a better term. This means that since it is recognized as other than an extension of the primary, u could get files to treat it like a 2nd harddrive, maybe have a two OS's installed at 1 time. ( wm5 and then wm6 ) just boot into which 1 u want to use. or im working on trying to get the WM^ to treat it like a swap file for extra 10mb of memory. swap files r treated just like system memory by the Operating system.
any how u just have to make some reg changes and u are in business
bunvilla said:
i have both working on dcd 3.01 rom with the new 3.35 radio. I also discovered a way to unhide the extrom in dcd's kitchen and without the bug that happens when u follow this links suggestion : http://forum.xda-developers.com/show...ghlight=EXTRom
I have the phone recognize my extrom as a Mounted Volume or a harddrive for a lack of a better term. This means that since it is recognized as other than an extension of the primary, u could get files to treat it like a 2nd harddrive, maybe have a two OS's installed at 1 time. ( wm5 and then wm6 ) just boot into which 1 u want to use. or im working on trying to get the WM^ to treat it like a swap file for extra 10mb of memory. swap files r treated just like system memory by the Operating system.
any how u just have to make some reg changes and u are in business
Click to expand...
Click to collapse
would you care to further explain exactly how you got wm5torage and card export working on dcd's 3.01 rom with the new 3.35 radio? cause i jus tried both on the same rom and it's a no go for me, using the computer operating system windows XP. i have seen them work in linux.
well first i have the security and encryption off/ second, my version of both those progs are cracked, so they have been altered and third i thinks got something to do with the fact that i use QPST program which i have both 6700 and 6800 usb drivers on my phone. i use the 6700 usb drivers for that program and possibly thats what is making those programs work. U know because i havent had a problem with them i never thought about it./ but i couldnt but a 100 percent sure, but it would be my best guess. besides from my last post u can see that i have been messing with my extrom in which i use the 2 progs to help me with
how'd u get the 6700 usb drivers on your phone? u cooked it in using dcd's kitchen? where'd u get the 6700 drivers from? the apache kitchen??
card export II seemed to work w/ linux for me (did an "ls" to see the directory listing), However, when used with Server 2003 (my regular desktop that has activesync), it mounted itself, but when I went to see the drive, it was empty.
exactly the same for me. works in linux...and is visible but empty in windows. wonder how bunvilla got it to work. he's the only one so far that's been able to get them working.
says the drivers from the 6700 is on his 6800...sounds very likely to work that way but.....wonder how he got the drivers from the 6700??
Hopefully they will figure out something soon. This program is really helpful.
i want to make sure we are on the same page ok. When i use that program I only have access to my SD card. I cant access my phone folders. So when im at work and i want to save something to my sd card i turn on Card Export II 3.08 and then the little green light comes on and in a minute it shows up when i click "my computer" icon. But u know something ever since i changed the extrom to Mounted Volume ( no i didnt just rename the Extrom to Mounted Volume) it shows up too as a little 9mb removeable drive right below my Sd card.
so in the main directory there are 2 extra removable drives that shows up, and the only thing i can think of is my SDcard is formatted fat32.
Oh and by the way i didnt extract the 6700 usb drivers from a 6700 phone, i got them from a website and i rename my usb drvs for the 6800 and use the 6700 usb drvs and then switch when im done.
someone told me that i was doing it the hard way but it works for me. hope this helps some,
there are those times when stuff jus doesnt work for everyone else. sound like a lucky dude and congrats...cause NO ONE else can get it to work. not even the company who created the program. they're supposed to be working on a fix now.
well u know something else that i have that nobody else seems to have is the extrom , on my version of DCD' 3.01 everyone else seem to have issues with that too. at best they get extrom and extrom2 showing up when they use No2chem unlock extrom in the root directory of thier phone. I include a thumb shot of my root and u will see that i not only fixed that issue i also have the extrom show up as a removable drive and it changed from extrom to Mounted Volume and i didnt rename it that, it happened because of the reg edits i made and flashdrv.dll i used. im surprised that doesnt get your curiosity. I can both read and write to it, might even be able to add it to the pagepool. im working it right so i will let u know if i succeed .
WM5torage 1.8 hacked version working
Hey all. Found this on one of the kaiser forums.
I can verify that I have successfully used this cab on my sprint mogul with OLD stock rom 2.17
The steps required are as follows:
1.Install hacked cab below
http://forum.xda-developers.com/attachment.php?attachmentid=69221&d=1202300677
2.Soft Reset
3.Click yes to install card export and then OK to error messages
4.Open WM5torage and disable rndis
Note:According to thread, this will not work if you have ever installed card export on your system. Not sure why
Note 2: I am using 512microsd card with stock rom. I am about to reflash (for a change) and will repost later with my custom rom based on new 3.35
-Josh
bunvilla said:
well u know something else that i have that nobody else seems to have is the extrom , on my version of DCD' 3.01 everyone else seem to have issues with that too. at best they get extrom and extrom2 showing up when they use No2chem unlock extrom in the root directory of thier phone. I include a thumb shot of my root and u will see that i not only fixed that issue i also have the extrom show up as a removable drive and it changed from extrom to Mounted Volume and i didnt rename it that, it happened because of the reg edits i made and flashdrv.dll i used. im surprised that doesnt get your curiosity. I can both read and write to it, might even be able to add it to the pagepool. im working it right so i will let u know if i succeed .
Click to expand...
Click to collapse
it gets my curisoty as well. one thing i have to say is it appears your level of geekiness is definitely a step above mines. u're a smart guy man. would be nice if you could maybe dump that rom of yours for us and maybe create a bunvilla's rom based off dcd's 3.01 with wm5torage and a mountable extrom working. im almost certain it would get a substantial amount of users.

HTC TYTN WM5 to WM6 Upgrade help needed

Hi guys
I own a HTC TYTN (Vodafone 1605) having WM5 and would like to have latest updates and features on it. I checked HTC site and i suppose they are not offering any updates for this model.Please help since i am not very used in doing upgrades etc.
Thanks
Ashok
Start here!
DO THIS FIRST!(MOST IMPORTANT)
HARD SPL
http://forum.xda-developers.com/showthread.php?t=296722
THIS IS NEXT
SIM/CID Unlock
http://forum.xda-developers.com/showthread.php?t=293665
THEN GO HERE
Schap's WM6 ROM (It's great!)
http://forum.xda-developers.com/showthread.php?t=359458
IF YOU GET STUCK GO HERE
http://forum.xda-developers.com/showthread.php?t=455859
Mind you, Schaps is a very old rom now, go to the wm06 part of this forum to find roms that are more current.
It may be old but it still works great.
It might be old but i like it. It doesn't hang and all my 3rd party apps work flawlessly even TOMTOM 7.
What ROM would you suggest?
At the moment I'm using REVROM Lite. I changed the flash screens though as I like some others better. I also use Tomtom 7 though I have it installed on my sd card and just send a shortcut to windows startmenu folder. Have no probs whatsoever.
Its really fast and seems to be stable with me NOT having to soft reset at all for the last 2 days... You gotta admit thats pretty decent performance, I've also had no HR's or freezes. Could just be I've finally found the rom and setup that is good for me...
Cheers...
Yeh, i hear ya. I actually flashed two other ROMS on my phone tonight just to see what they were like, but i'm going back to schaps. It was stable and it seemed to give good battery life. I have all my 3rd party apps installed to my 8GB SD card to save space on my phone. Seems to work for me. Thanks for your input. Two heads are better than one unless one of them is a goathead. LOL Anyway thanks again.
Have been having similar problems upgrading my HTC TyTN from its official WM5 to the Official release of WM6. Every ROmor upgrade or program I have used has failed once it has switced the phone into bootloader mode even using Hard-SPL. Ive being crazy trying to find a solution. Hasnt help that Ive had enough trouble getting started thanks to using Vista-64bit and its driver signing problems. I have since sorted that problem and am now not getting any further with flashing the ROM.
I wouldnt class my self as an expert but I also would consider myself a novice as I build PC's and have flashed both my Xbox 360 and my PSP so am used to working in the shady underworld.
Vista Home premium
Ok here's what i've found with vista. I run AVG anti virus and spybot search and destroy on my laptop. When i use my laptop to flash a rom to my phone i have to turn both off. Even then when i flashed to the OEM cingular rom i had to put my phone in bootloader for it to flash. If i let the program put it into bootloader it wouldn't work. Now, when i flashed to shcaps and my preferred radio rom it worked fine as long as advanced network funtionality WAS checked. Before i found these fixes though i used the SD flash method which is in my opinion the best way to go since it is so simple. That is the way i flashed my Axim X51V so i was familiar with that method, i just had to figure out the correct procedure for the phone.
This is from the post that explains SD flash.
1. download hardspl v7 from the first post.
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done
Good luck
OH and if you need the official Cingular WM6 ROM you can download it here.
If you have Hard SPL installed ignore the steps using SSPL.exe as that is Soft SPL. It's not as safe as Hard SPL.
Cheers...
PS. make sure you use a 2Gb or less sd card as the bootloader won't recognise sdhc cards, format FAT32 (most cards are default formatted FAT) & make sure of your spelling as it won't work otherwise - hermimg.nbh.
thankĀ“s you all for help me upgrade HTC TYNT

Categories

Resources