Does anybody have sms conversation cab? I simply cant find it anywhere...
Still cant find any cab?
You could find by searching with keywords:
Disable SMS Threading
The first cab in the following link disables also SMS Sent notification, so if you don't want to do that, you can use the other cab to enable it:
http://forum.xda-developers.com/showpost.php?p=2044965&postcount=22
But keep in mind that it will only work with WM6.1. The messaging app in earlier OSes doesn't support threaded (conversation style) SMS.
rondol1 said:
But keep in mind that it will only work with WM6.1. The messaging app in earlier OSes doesn't support threaded (conversation style) SMS.
Click to expand...
Click to collapse
if a noob like me did that in the WM6 not in WM6.1...and it dosent restart any more, stays in WM logo, what can i do?!?! i need the sms thats in the phone, and now i cant turn it on, and i dont want to flash again cause ill lose it....is there a way to start the phone like in safe mode so that way i can uninstall the program?!?!
thanks
spider_mg_zr said:
if a noob like me did that in the WM6 not in WM6.1...and it dosent restart any more, stays in WM logo, what can i do?!?! i need the sms thats in the phone, and now i cant turn it on, and i dont want to flash again cause ill lose it....is there a way to start the phone like in safe mode so that way i can uninstall the program?!?!
thanks
Click to expand...
Click to collapse
Oei, I think you have a problem there.... I can't think of a solution that will work after the damage is done. (All the Safe Mode utils I know have to be installed before the **** hits the fan).
Anyone..?
rondol1 said:
Oei, I think you have a problem there.... I can't think of a solution that will work after the damage is done. (All the Safe Mode utils I know have to be installed before the **** hits the fan).
Anyone..?
Click to expand...
Click to collapse
thanks...but this is #"$!"%"%|$#"§£@§£@
thanks again, anyone please?!?!?!
Thankz for the reply..! safe mode in wm6.1? hmmm...
AFAIK, there is no way to get anything when it won't boot up fully...
thanks to all...i did flash it again, and lose everything ((
in the process i put the new 6.1 ROM from Cloudyfa )) until Gollum dont release his new one ))
sorry again...but could anyone give me a link to safemode cab?!?! to use with WM6.1, cause i dont want to lose anything anymore
thanks
Related
I have a Unit PW10B1 T-mobile stuck on the T-mobile boot screen, anyway I found out “GSM ERROR” in the boot loader, any suggestion or a way to fix it, I have a working o2 mobile, I’m not aware of the battery I could replace it from the other unit and recharge it…so pls give me feedback it’s very important to me, thank you.
If you can't access the device through active synce to try flashing the RSU, then you can do nothing except trying hard reset ... if it doesn't solve it it's better to send it to repair
Biso007 said:
If you can't access the device through active synce to try flashing the RSU, then you can do nothing except trying hard reset ... if it doesn't solve it it's better to send it to repair
Click to expand...
Click to collapse
Hello Biso, I can't access the device through the active sync, I tried Hard reset as well same problem the Unit stucks on the boot screen and the light flashes every like 5 seconds... about the repair center here in leb it's impossible there's no techis could solve this problem.. Isn't another way to do something to this unit ?
Unfort. NO, I couldn't find anyway to flash the RSU through SD ... the only option if you can pass the boot screen is to copy the RSU upgrade 4 files through SD card to the \windows\starup directory and soft rest
I'll try to get in I have nothing than just to let this unit works : :roll:
Anyone here consider to say something here for help ?
I'm still stuck thus I tried the Volume buttom to enter the today screen no luck as well ,but I noticed there's an Infrared connection btw my pc and the xda but active sync cannot connect to it, But I could send a files to the Xda like now am sending a .cab file I know it's not gonna make any diffrence but still maybe someone consider some help here.........
Someone would like to help here ?
Its not much good sending a file if you cant access and execute it on the xda, you have probably realised by now that "gsm error" is likely to be fatal to your xda. There is a person on this forum called Cgigate, he lives in Canada and can fix it, dont know the charges though so you need to ask him. I think he most likely writes direct to the chip through the address lines on the chip legs probably using a jtag interface and software.
cruisin-thru said:
Its not much good sending a file if you cant access and execute it on the xda, you have probably realised by now that "gsm error" is likely to be fatal to your xda. There is a person on this forum called Cgigate, he lives in Canada and can fix it, dont know the charges though so you need to ask him. I think he most likely writes direct to the chip through the address lines on the chip legs probably using a jtag interface and software.
Click to expand...
Click to collapse
Thank you cruisin-thru.. :roll:
If i understand it right you're able to transfer files from your PC to yiur XDA.
HAve you already tried to transfer the right RSU-File to the device and tried to start the update once again?
Stefan
LumpiStefan said:
If i understand it right you're able to transfer files from your PC to yiur XDA.
HAve you already tried to transfer the right RSU-File to the device and tried to start the update once again?
Stefan
Click to expand...
Click to collapse
Yes I could transfer any file I want to the Xda but still I can't do anything to it I can't reach it thus it's not an auto installer... Thus the screen is freezed on the T-mobile image, I tried the Volume buttom to enable the today screen still no luck as well :?
Ok.
So you think, with auto installer it could work. There has been a little how to about creatind an SD card with auto installer to start the RSU Upgrade. This would be the last posibility you can try to fix your device...
Stefan
LumpiStefan said:
Ok.
So you think, with auto installer it could work. There has been a little how to about creatind an SD card with auto installer to start the RSU Upgrade. This would be the last posibility you can try to fix your device...
Stefan
Click to expand...
Click to collapse
I had that auto installer file I copied it to an SD an prepared it to do that, anyway I hadn't tried it on that device later on I plugged it in my working XDA and the show begun by installing the RSU ON MY WORKING DEVICE :evil: I removed quickly the SD ,Installation stuck on 1% I went back to the start up folder and deleted the files :roll: lol I don't wanna tell you how much it feels it's like your seeing your baby dying infront of your eyes and you can't do anything about it,at the end It's still alive breathing, working properly :wink: beware guys of the RSU issue it's really horrible it might get ur device in the tombs..
Ive have tried almost ever roms on this site and LOVE them BUT with all the latest and greatest ones when i touch CONTACTS it pops up then disappears.
I so badly want to use these lovely roms but not being able to use my contacts is killing me. Anyone PLZZZZ any help?
Thats because you restore backups from WM5. You cant do that.
What should i restore too? I don't get it.
I always use this RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe
Then i install the ROM i like.
Please tell me where ive gone wrong.
AnalogX said:
What should i restore too? I don't get it.
I always use this RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe
Then i install the ROM i like.
Please tell me where ive gone wrong.
Click to expand...
Click to collapse
Two things to Check.
1. Are you hard resetting after installing the WM6 ROM
2. Are you using a backup from your old version (using third party S/W like sprite SPB backup etc).
If you are not doing 1. then do it
if you are doing 2. then dont do it.
Simply do a Hardreset after flashing the WM6 you try!
CommManager + Camera button (holding these two) - doing a softreset and answer the question with YES (pushing the green Send button)! That's it!
I have only ever had this (RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe)
on my phone , thats the way i got it when i bought it off a guy and he told me to use that was the latest ROM for my prophet S200 G4. And yes i do hard reset after every install of roms.
THE ONLY THING IVE EVER DONE WITH THIS PHONE
1) Installed RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe
2) Installed NEW ROMS then hard reset. ALL works perfect but contacts on all roms i try.
IF I NEED TO USE SOMETHING BESIDES OR DIFFRENT FROM RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe PLEASE TELL ME.
animelover said:
Simply do a Hardreset after flashing the WM6 you try!
CommManager + Camera button (holding these two) - doing a softreset and answer the question with YES (pushing the green Send button)! That's it!
Click to expand...
Click to collapse
YES M8 I do this EVERY time :-( Every rom....And still contacts problem.
are u sure that you are doing the HR correctly?
HR solved that problem to me...
And I restored a backup with pimbackup from wm2003!
OK OK OK OK You guys where 100% right and i am a looser newbie who needs a swift kick in the teeth. IT WAS THE HARD RESET I WAS DOING WRONG!
I M SO SORRY FOR THE TROUBLE! ILL TRY TO BE MORE OBSERVANT IN MY PHONE FIDDLING! AND THANK YOU FOR THE HELP!
AnalogX said:
OK OK OK OK You guys where 100% right and i am a looser newbie who needs a swift kick in the teeth. IT WAS THE HARD RESET I WAS DOING WRONG!
I M SO SORRY FOR THE TROUBLE! ILL TRY TO BE MORE OBSERVANT IN MY PHONE FIDDLING! AND THANK YOU FOR THE HELP!
Click to expand...
Click to collapse
hey everyone was a newbie
Last night I received an alert on my phone stating "This copy of Windows Mobile expires within 30 days on 12/01/2009."
This morning I reloaded Da_G's 23420-fuze-uncompressed ROM and received the same expiration message.
Is there a fix for this expiration date or is someone working on it? I have attached a screen shot to show the message. My apologies for it not being clear, iPhones don't have the ability to take good macro photos.
Oh yeah, and I did a search and found nothing on the topic.
bkeitht said:
Last night I received an alert on my phone stating "This copy of Windows Mobile expires within 30 days on 12/01/2009."
This morning I reloaded Da_G's 23420-fuze-uncompressed ROM and received the same expiration message.
Is there a fix for this expiration date or is someone working on it? I have attached a screen shot to show the message. My apologies for it not being clear, iPhones don't have the ability to take good macro photos.
Oh yeah, and I did a search and found nothing on the topic.
Click to expand...
Click to collapse
From the looks of it, the shell wasn't patched during the cooking process. Odd, you say this is Da_G's ROM? Usually he is on top of things.
Wot daaaa :S
Try this: bump your calendar up a month, and see if the device pukes on you. It won't; the shell has been patched, but the notifications are still in the queue. You can delete the notifications with dotfred's task manager or sk tools.
Actually I am having the same issue!! Was using Baseline ROM and got the Error. I changed date to 1/1/10 and POOF WinMo is now gone =( cant use phone at all...... !!
What do you mean WinMo is gone? It doesn't start anymore? That is weird indeed. You should fash a new ROM and see what happens...
its gone as in a white message and everything is disabled.. cant even get rid of the expiration message..
Cant flash to new Rom cause comp wont even find it anymore when usb is connected.....ugh!
i had my phone disappear once You get a message that your version expired and then you can't enter any apps and data connections are disabled. All you need to do is force a hardware hard reset of the device - it was restore your ROM and you'll start the clock over. It's not fun but iut's better than a phone that's nonfunctional.
i think you need an patched shell32.exe, because yours is timebombed, but actually(since last week) i dont know where to get this patched exe...
which os build do you use? maybe i have one 4 you
maybe search this thread:
http://forum.xda-developers.com/showthread.php?t=544445
icythunder said:
its gone as in a white message and everything is disabled.. cant even get rid of the expiration message..
Cant flash to new Rom cause comp wont even find it anymore when usb is connected.....ugh!
Click to expand...
Click to collapse
Did you flash a Rom without first flashing Hard SPL?
If you have flashed with Hard SPL you should be able to run the boot loader by pressing Vol down button and reset at the same time, keep holding the Vol down button and the boot loader screen should load. You should them be able to connect to your pc and re flash another ROM.
Other than that if you have flashed a ROM without first flashing Hard SPL then you must have ignored all the warnings which strongly suggest that you could brick your phone. I hope this is not the case.
nice news
sorry mates but i really like this messages. coz i always hated wm6.5 and its honeycomb desıgn. may be it pushs cookers to make beauty wm6.1 roms
Farmer Ted said:
Try this: bump your calendar up a month, and see if the device pukes on you. It won't; the shell has been patched, but the notifications are still in the queue. You can delete the notifications with dotfred's task manager or sk tools.
Click to expand...
Click to collapse
The Timebomb is active! I bumped the calendar up and it froze up and locked me out. I can no longer use the phone. Below is the error message that I received.
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further information, please visit the web site that you used to obtain your current beta release."
eckki, I'm using Da_G's WinMo 6.5 23420-fuze-uncompressed ROM. Can you PM me the instructions and link me to the shell32.exe that is patched to prevent the timebomb?
audible_paradigm said:
Did you flash a Rom without first flashing Hard SPL?
If you have flashed with Hard SPL you should be able to run the boot loader by pressing Vol down button and reset at the same time, keep holding the Vol down button and the boot loader screen should load. You should them be able to connect to your pc and re flash another ROM.
Other than that if you have flashed a ROM without first flashing Hard SPL then you must have ignored all the warnings which strongly suggest that you could brick your phone. I hope this is not the case.
Click to expand...
Click to collapse
You can do what he said and you should also be able to flash from your SD card. Please say you have a card reader.
bkeitht said:
The Timebomb is active! I bumped the calendar up and it froze up and locked me out. I can no longer use the phone. Below is the error message that I received.
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further information, please visit the web site that you used to obtain your current beta release."
eckki, I'm using Da_G's WinMo 6.5 23420-fuze-uncompressed ROM. Can you PM me the instructions and link me to the shell32.exe that is patched to prevent the timebomb?
Click to expand...
Click to collapse
I'm 99% sure you can't replace the shell.exe file once a ROM has been flashed. It's something that has to be cooked into the ROM. Anyone have any success replacing the shell.exe after a flash?
silentP said:
I'm 99% sure you can't replace the shell.exe file once a ROM has been flashed. It's something that has to be cooked into the ROM. Anyone have any success replacing the shell.exe after a flash?
Click to expand...
Click to collapse
I'm re-flashing the phone now, so it will be back to normal in about 20 minutes. I guess we have ~30 days to get a fix for it.
bkeitht said:
I'm re-flashing the phone now, so it will be back to normal in about 20 minutes. I guess we have ~30 days to get a fix for it.
Click to expand...
Click to collapse
That sucks, hopefully you didn't lose anything. You going to stick with 23420, or trying another flavor? Have you tried your hand at cooking yet?
bkeitht said:
I'm re-flashing the phone now, so it will be back to normal in about 20 minutes. I guess we have ~30 days to get a fix for it.
Click to expand...
Click to collapse
I'm surprised that it snuck in; I've tested my 23081 build (which has the notifications), and the timebomb was patched properly. Maybe you should pm Da_G just so he knows. You can sometimes overwrite shell32.exe I believe, but it's not a great way to fix things. You're better off cooking in the patched shell.
HI, im using Energty 23016 25/10 and no message until now. I has sync with my phone and everything its normal...
Ofcourse I hard-SPL it, when I turne phone off and press vol down nothing happens.. can u please help how do I hard reset and re flash?
as in the tri color screen comes, just says RAPH 0.37 something.. no option to flash/undo lol.. HELP!
icythunder said:
Ofcourse I hard-SPL it, when I turne phone off and press vol down nothing happens.. can u please help how do I hard reset and re flash?
as in the tri color screen comes, just says RAPH 0.37 something.. no option to flash/undo lol.. HELP!
Click to expand...
Click to collapse
Ok, turn your phone off. Now, simultaneously hold vol down, hold the power button, and use your stylus to press the reset button on the bottom. That will take you to the tri-color screen. Plug your USB into your phone and reflash.
Where to start. Ive had a new HTC HD2 for a few weeks now and I think I spend more time popping the battery cover off to reset more than I use the phone. A straight pin is now always with me.
I guess I need to do a factory reset or take the thing back but of course I am reluctant because I have got it where I like it (apps, quick links, icons, etc.) but maybe I got a bad one.
Here are my specs:
O/S:
5.2.21892 (21892.5.0.89)
Manila:
2.5.20121412.2
ROM:
2.13.53.1 (90963) WWE
date:
04/25/10
Radio v:
2.10.50.26
Protocol:
15.39.50.07U
Issue: Constant soft restart when using various apps (specifically Aloqa - which I have unstalled/reinstalled with the same problem); freezing; boot up freeze / loop; did I say freezing! yeah .. lots of it.
What I have:
WWLongLife
TaskMgr on Quick Link (use it often)
Julian Amazing Icons
BsB Tweeks
CoOkies Home v1.8.5
maybe a couple of other cabs but nothing untrusted i dont think.
I am not a major power user (i dont use email check - only through Opera 10/gmail) but a normal user.
So i am here to get some advise. If you were me what would you do?
Thanks in advance! This place rules.
try default lock .......and disable cht lock in cht editor...cht lock has been noted to have issues in the new 1.8.5 version
pakure said:
try default lock .......and disable cht lock in cht editor...cht lock has been noted to have issues in the new 1.8.5 version
Click to expand...
Click to collapse
do i need the CHT editor to disable cht locK? i cant find the setting.
in cht editor,>>>> lockscreen settings...turn enable cht lockscreen to off
and unlock style>>>manila
menu>>apply settings
menu>>exit
you dont mean to tell me u DONT use CHT editor at all??????
nope. i only installed CHT for the additional quick links on the home screen.
lol...dude, first install cht editor..........that should deal with all your issues...and still enable only the default lock...you didnot know what you are missing...
it will be in menu on the main home screen, once you install it
so the weirdest thing just happened. I opened Opera 10 to dl CHT Editor and my screen flipped vertically! i pushed the end button and now it wont boot up. ... again! *&@#*&@$&! stock on welcome screen!! ugh!
My personal sugestion will be to task29, reflash, hard re-set and try the ROM with out any extra cabs for a while...after that if everything works fine...install your cabs one by one keeping an eye on your HD2 performance.
stop messing with the phone...ha ha ha ..sorry, but u r funny........and stop sticking things to soft reset the phone by pressing the button....first disable sense by going to settings/ menu/all settings/ today/ unselect htc sense/ok
and then install cht editor and then power off/on the phone by pressing the end key....
hope it helps
M_T_M said:
My personal sugestion will be to task29, reflash, hard re-set and try the ROM with out any extra cabs for a while...after that if everything works fine...install your cabs one by one keeping an eye on your HD2 performance.
Click to expand...
Click to collapse
I was thinking this exactly but need step by step instructions
what do i get first, second, how .. is there a link to instructions? i found a site that stated you could task29 without mtty? is that what i should do? thx!!!
pakure said:
stop messing with the phone...ha ha ha ..sorry, but u r funny........and stop sticking things to soft reset the phone by pressing the button....first disable sense by going to settings/ menu/all settings/ today/ unselect htc sense/ok
and then install cht editor and then power off/on the phone by pressing the end key....
hope it helps
Click to expand...
Click to collapse
you're funny!
marinazar said:
I was thinking this exactly but need step by step instructions
what do i get first, second, how .. is there a link to instructions? i found a site that stated you could task29 without mtty? is that what i should do? thx!!!
Click to expand...
Click to collapse
First the legal mambo jumbo...you are doing by personal choice and I'll never take the blame if you end up with a $500.00 brick....capishe?
Go here and read
http://forum.xda-developers.com/showthread.php?t=644781
Then go here and pick your ROM
http://forum.xda-developers.com/forumdisplay.php?f=534
Then do plenty of reading before you press enter or ok to anything
Quick question...have you Hard SPL your phone? If not...go here and ...please read everything!!
http://forum.xda-developers.com/showthread.php?t=609477
pakure said:
stop messing with the phone...ha ha ha ..sorry, but u r funny........and stop sticking things to soft reset the phone by pressing the button....first disable sense by going to settings/ menu/all settings/ today/ unselect htc sense/ok
and then install cht editor and then power off/on the phone by pressing the end key....
hope it helps
Click to expand...
Click to collapse
marinazar said:
you're funny!
Click to expand...
Click to collapse
yeah, yeah...we are very funny in here...concentrate please
M_T_M said:
First the legal mambo jumbo...you are doing by personal choice and I'll never take the blame if you end up with a $500.00 brick....capishe?
capishe
Go here and read
http://forum.xda-developers.com/showthread.php?t=644781
Then go here and pick your ROM
http://forum.xda-developers.com/forumdisplay.php?f=534
Then do plenty of reading before you press enter or ok to anything
gotchya
Quick question...have you Hard SPL your phone? If not...go here and ...please read everything!!
http://forum.xda-developers.com/showthread.php?t=609477
heading there now
Click to expand...
Click to collapse
wish me luck!
pinbackup
M_T_M said:
Quick question...have you Hard SPL your phone? If not...go here and ...please read everything!!
http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
is this the same app?
http://www.dotfred.net/
ive used all my rapidshare time
marinazar said:
wish me luck!
Click to expand...
Click to collapse
Not luck...I wish you do READ everything before doing anything...plase read
marinazar said:
is this the same app?
http://www.dotfred.net/
ive used all my rapidshare time
Click to expand...
Click to collapse
No.....Hrd SPL it's what you need
M_T_M said:
No.....Hrd SPL it's what you need
Click to expand...
Click to collapse
sorry, should have been more specific - i was looking to dl PimbackUp from rapidshare but cant atm. ill wait it out bc the link i posted isnt supported.
i am reading everything now! promish
marinazar said:
sorry, should have been more specific - i was looking to dl PimbackUp from rapidshare but cant atm. ill wait it out bc the link i posted isnt supported.
i am reading everything now! promish
Click to expand...
Click to collapse
Are you trting to back up your info before flashing? If so try Mycrosoft Myphone...it's free and great!
This is the cab..
and then go here and read some more
http://sn1-p3.myphone.microsoft.com/mkweb/Start.po?mkt=en-US
Hi all,
I have problem with HTC HD2 LEO
The problem is the operating system is not going up give me error
..\..\common\persistence\internal\winmfile.cpp:56
i have the sound control button is completely not working i need to make format(hard reset) i cant is any other way to do the format ?
i did try the phone shop to fix the phone volume key but every one saying they can't fo it :s
i was wondering if any one the professional developer they can make auto format for the mobile when attached into the SD active itself automatic like
autorun.
Many thanks for all try to help
Wael
I cant see anyone has the idea for the problem thank you very much for looking at the post
if any one knew any way for this can you write it in this post please and i will check it always .
If it was me I think the only thing i would even think of trying IF ITS STOCK rom and all. I would try to use the offical tmobile upgrade rom somehow. If you can plug it into the PC and the computer "knows its there" then I would try the offical tmobile rom. I hope you find a way to fix it. Good Luck
is any way i can connect the phone without windows mobile device centre ?
wa2el said:
is any way i can connect the phone without windows mobile device centre ?
Click to expand...
Click to collapse
The same thing is happening to me...I donr know how ...but I turn mt phone on and all of a sudden there was a message saying that there was an error and to push the up volume. To hard reset...and it did it by its self...cause my down volume. Doesn't work...so tthe phone knew it had a problem...I fixed it...loaded some of my mods...andvthe error now came bavk and I'm screwded once again...hoping that message will come back...I let it sit for hours and that's when it came on...???
hi again.
still i cannot find way to fix it but was wondering if some one has really good exprience in windows mobile can make patch for us to format the mobile auto run throw memory card it will be helpfull
Thanks in advance.
wa2el said:
hi again.
still i cannot find way to fix it but was wondering if some one has really good exprience in windows mobile can make patch for us to format the mobile auto run throw memory card it will be helpfull
Thanks in advance.
Click to expand...
Click to collapse
That wouldnt work cause we can't get to the home screen to the browser /internet to download anything...so we are screwed...