Where to start. Ive had a new HTC HD2 for a few weeks now and I think I spend more time popping the battery cover off to reset more than I use the phone. A straight pin is now always with me.
I guess I need to do a factory reset or take the thing back but of course I am reluctant because I have got it where I like it (apps, quick links, icons, etc.) but maybe I got a bad one.
Here are my specs:
O/S:
5.2.21892 (21892.5.0.89)
Manila:
2.5.20121412.2
ROM:
2.13.53.1 (90963) WWE
date:
04/25/10
Radio v:
2.10.50.26
Protocol:
15.39.50.07U
Issue: Constant soft restart when using various apps (specifically Aloqa - which I have unstalled/reinstalled with the same problem); freezing; boot up freeze / loop; did I say freezing! yeah .. lots of it.
What I have:
WWLongLife
TaskMgr on Quick Link (use it often)
Julian Amazing Icons
BsB Tweeks
CoOkies Home v1.8.5
maybe a couple of other cabs but nothing untrusted i dont think.
I am not a major power user (i dont use email check - only through Opera 10/gmail) but a normal user.
So i am here to get some advise. If you were me what would you do?
Thanks in advance! This place rules.
try default lock .......and disable cht lock in cht editor...cht lock has been noted to have issues in the new 1.8.5 version
pakure said:
try default lock .......and disable cht lock in cht editor...cht lock has been noted to have issues in the new 1.8.5 version
Click to expand...
Click to collapse
do i need the CHT editor to disable cht locK? i cant find the setting.
in cht editor,>>>> lockscreen settings...turn enable cht lockscreen to off
and unlock style>>>manila
menu>>apply settings
menu>>exit
you dont mean to tell me u DONT use CHT editor at all??????
nope. i only installed CHT for the additional quick links on the home screen.
lol...dude, first install cht editor..........that should deal with all your issues...and still enable only the default lock...you didnot know what you are missing...
it will be in menu on the main home screen, once you install it
so the weirdest thing just happened. I opened Opera 10 to dl CHT Editor and my screen flipped vertically! i pushed the end button and now it wont boot up. ... again! *&@#*&@$&! stock on welcome screen!! ugh!
My personal sugestion will be to task29, reflash, hard re-set and try the ROM with out any extra cabs for a while...after that if everything works fine...install your cabs one by one keeping an eye on your HD2 performance.
stop messing with the phone...ha ha ha ..sorry, but u r funny........and stop sticking things to soft reset the phone by pressing the button....first disable sense by going to settings/ menu/all settings/ today/ unselect htc sense/ok
and then install cht editor and then power off/on the phone by pressing the end key....
hope it helps
M_T_M said:
My personal sugestion will be to task29, reflash, hard re-set and try the ROM with out any extra cabs for a while...after that if everything works fine...install your cabs one by one keeping an eye on your HD2 performance.
Click to expand...
Click to collapse
I was thinking this exactly but need step by step instructions
what do i get first, second, how .. is there a link to instructions? i found a site that stated you could task29 without mtty? is that what i should do? thx!!!
pakure said:
stop messing with the phone...ha ha ha ..sorry, but u r funny........and stop sticking things to soft reset the phone by pressing the button....first disable sense by going to settings/ menu/all settings/ today/ unselect htc sense/ok
and then install cht editor and then power off/on the phone by pressing the end key....
hope it helps
Click to expand...
Click to collapse
you're funny!
marinazar said:
I was thinking this exactly but need step by step instructions
what do i get first, second, how .. is there a link to instructions? i found a site that stated you could task29 without mtty? is that what i should do? thx!!!
Click to expand...
Click to collapse
First the legal mambo jumbo...you are doing by personal choice and I'll never take the blame if you end up with a $500.00 brick....capishe?
Go here and read
http://forum.xda-developers.com/showthread.php?t=644781
Then go here and pick your ROM
http://forum.xda-developers.com/forumdisplay.php?f=534
Then do plenty of reading before you press enter or ok to anything
Quick question...have you Hard SPL your phone? If not...go here and ...please read everything!!
http://forum.xda-developers.com/showthread.php?t=609477
pakure said:
stop messing with the phone...ha ha ha ..sorry, but u r funny........and stop sticking things to soft reset the phone by pressing the button....first disable sense by going to settings/ menu/all settings/ today/ unselect htc sense/ok
and then install cht editor and then power off/on the phone by pressing the end key....
hope it helps
Click to expand...
Click to collapse
marinazar said:
you're funny!
Click to expand...
Click to collapse
yeah, yeah...we are very funny in here...concentrate please
M_T_M said:
First the legal mambo jumbo...you are doing by personal choice and I'll never take the blame if you end up with a $500.00 brick....capishe?
capishe
Go here and read
http://forum.xda-developers.com/showthread.php?t=644781
Then go here and pick your ROM
http://forum.xda-developers.com/forumdisplay.php?f=534
Then do plenty of reading before you press enter or ok to anything
gotchya
Quick question...have you Hard SPL your phone? If not...go here and ...please read everything!!
http://forum.xda-developers.com/showthread.php?t=609477
heading there now
Click to expand...
Click to collapse
wish me luck!
pinbackup
M_T_M said:
Quick question...have you Hard SPL your phone? If not...go here and ...please read everything!!
http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
is this the same app?
http://www.dotfred.net/
ive used all my rapidshare time
marinazar said:
wish me luck!
Click to expand...
Click to collapse
Not luck...I wish you do READ everything before doing anything...plase read
marinazar said:
is this the same app?
http://www.dotfred.net/
ive used all my rapidshare time
Click to expand...
Click to collapse
No.....Hrd SPL it's what you need
M_T_M said:
No.....Hrd SPL it's what you need
Click to expand...
Click to collapse
sorry, should have been more specific - i was looking to dl PimbackUp from rapidshare but cant atm. ill wait it out bc the link i posted isnt supported.
i am reading everything now! promish
marinazar said:
sorry, should have been more specific - i was looking to dl PimbackUp from rapidshare but cant atm. ill wait it out bc the link i posted isnt supported.
i am reading everything now! promish
Click to expand...
Click to collapse
Are you trting to back up your info before flashing? If so try Mycrosoft Myphone...it's free and great!
This is the cab..
and then go here and read some more
http://sn1-p3.myphone.microsoft.com/mkweb/Start.po?mkt=en-US
Related
Ive have tried almost ever roms on this site and LOVE them BUT with all the latest and greatest ones when i touch CONTACTS it pops up then disappears.
I so badly want to use these lovely roms but not being able to use my contacts is killing me. Anyone PLZZZZ any help?
Thats because you restore backups from WM5. You cant do that.
What should i restore too? I don't get it.
I always use this RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe
Then i install the ROM i like.
Please tell me where ive gone wrong.
AnalogX said:
What should i restore too? I don't get it.
I always use this RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe
Then i install the ROM i like.
Please tell me where ive gone wrong.
Click to expand...
Click to collapse
Two things to Check.
1. Are you hard resetting after installing the WM6 ROM
2. Are you using a backup from your old version (using third party S/W like sprite SPB backup etc).
If you are not doing 1. then do it
if you are doing 2. then dont do it.
Simply do a Hardreset after flashing the WM6 you try!
CommManager + Camera button (holding these two) - doing a softreset and answer the question with YES (pushing the green Send button)! That's it!
I have only ever had this (RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe)
on my phone , thats the way i got it when i bought it off a guy and he told me to use that was the latest ROM for my prophet S200 G4. And yes i do hard reset after every install of roms.
THE ONLY THING IVE EVER DONE WITH THIS PHONE
1) Installed RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe
2) Installed NEW ROMS then hard reset. ALL works perfect but contacts on all roms i try.
IF I NEED TO USE SOMETHING BESIDES OR DIFFRENT FROM RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe PLEASE TELL ME.
animelover said:
Simply do a Hardreset after flashing the WM6 you try!
CommManager + Camera button (holding these two) - doing a softreset and answer the question with YES (pushing the green Send button)! That's it!
Click to expand...
Click to collapse
YES M8 I do this EVERY time :-( Every rom....And still contacts problem.
are u sure that you are doing the HR correctly?
HR solved that problem to me...
And I restored a backup with pimbackup from wm2003!
OK OK OK OK You guys where 100% right and i am a looser newbie who needs a swift kick in the teeth. IT WAS THE HARD RESET I WAS DOING WRONG!
I M SO SORRY FOR THE TROUBLE! ILL TRY TO BE MORE OBSERVANT IN MY PHONE FIDDLING! AND THANK YOU FOR THE HELP!
AnalogX said:
OK OK OK OK You guys where 100% right and i am a looser newbie who needs a swift kick in the teeth. IT WAS THE HARD RESET I WAS DOING WRONG!
I M SO SORRY FOR THE TROUBLE! ILL TRY TO BE MORE OBSERVANT IN MY PHONE FIDDLING! AND THANK YOU FOR THE HELP!
Click to expand...
Click to collapse
hey everyone was a newbie
I have searched and searched these forums and have seen several other people with this problem but no solution. I have also looked through the wiki to no avail, so if someone can give me an answer I would really appreciate it.
I have been able to get into the bootloader screen (the r-g-b white stripes) however there is NO text (no serial, no usb) on the screen and it is not recognized by any pc. Can't get any response from mtty.exe because it can't see the USB port. Have tried on multiple PC's...
Is there another way to resurrect this athena or is it DOA?
Thanks,
-Alex-
Some pics of problem...
Blank bootloader...
Please help!
Did you try reflash by SDcard?
http://wiki.xda-developers.com/index.php?pagename=Athena_SD_Card_Flashing
jas_pik said:
Did you try reflash by SDcard?
http://wiki.xda-developers.com/index.php?pagename=Athena_SD_Card_Flashing
Click to expand...
Click to collapse
Yes...no joy.
Just stays on the tri-color screen with no indication that it is reading the card.
Thanks for the advice though!
Did you try resetting - camera button and reset button on the back (I think...) pressed together.
Forum search will tell you exactly...
ssutherland said:
Did you try resetting - camera button and reset button on the back (I think...) pressed together.
Forum search will tell you exactly...
Click to expand...
Click to collapse
Yes, tried the hard reset (camera + reset) the alternate reset (comm + camera + reset) and even the other reset (volume slider + camera + reset). And yes, I was pushing down firmly on the camera button.
Each reset brings me to the tri-color bootloader screen with NO text. No model number, no OS version, no "USB" / "Serial"....just the red-gree-blue-white stripes.
I have looked extensively at all the forums, used the google search for the site and combed the wiki with no luck.
So do you think it is a lost case?
-Alex-
Hello,
sorry for what's happening to you. Can you tell what led to this situation ? Were you trying to unlock your phone or just flashing a new rom ?
luthor_70 said:
Hello,
sorry for what's happening to you. Can you tell what led to this situation ? Were you trying to unlock your phone or just flashing a new rom ?
Click to expand...
Click to collapse
I was trying to load a new ROM but I assumed that I had to use the OliPro unlock first.
Got to the radio flash and that is where it crapped out.
Now that I have read a little more carefully it looks like I don't need to use the OliPro beyond the first step for the stateside unlocked 7501.
Thanks,
-Alex-
when your on bootloader ? does windows detect a usb generic device ?
Nope. Tried 3 different PCs. Shut down all the activesync processes. No luck. No detection that anything is cabled to the advantage.
I am thinking that it is warranty time.
Damn, I hate this....its just the principle of the thing...
-Alex-
bairda said:
Nope. Tried 3 different PCs. Shut down all the activesync processes. No luck. No detection that anything is cabled to the advantage.
I am thinking that it is warranty time.
Damn, I hate this....its just the principle of the thing...
-Alex-
Click to expand...
Click to collapse
Key rule to remember is to always make sure the Advantage is Fully charged. Try charinging it and reflashing it with the factory rom, located here. http://www.america.htc.com/download/RUU_Athena_HTC_US_2.19.453.4_105_1.47.51.00_Ship.exe. Keep us posted and let us know how it went
have you removed the sim and memory card
just checking basics
try that with a full charge and then enter bootloader and connect to usb
Thanks for all the help! I gave up and warrantied a new unit where I WAS successful in loading a new ROM.
I have learned several valuable lessons in the ROM upgrade process. This was on an advantage 7501, unlocked, USA version. I did the upgrade the process with the OliPro 3.0 unlocker, the PK Rom 3.0 and vista pro (32bit):
- Make sure that you have NOT customized your athena/advantage beyond the basic calibration and cut/paste walkthrough.
-Download ONLY THE MOST RECENT VERSION OF THE OLIPRO UNLOCKER. CHECK TWICE TO MAKE SURE THAT YOU HAVE THE LATEST.
-You MUST let step one of the Unlock complete. With the latest version this will make a bricked Advantage practically impossible.
-Go through step 2 & 3 even if you don't think you need this. It will upgrade the radio and give you peace of mind if you are updating to the PK rom.
-Don't panic if you complete step 1 and goof step 2/3. You can recover. But if you screw up the initial SPL unlock in step1...it is not going to be pretty.
Hope this helps!
Thanks for everyones advice!
-Alex-
Does anybody have sms conversation cab? I simply cant find it anywhere...
Still cant find any cab?
You could find by searching with keywords:
Disable SMS Threading
The first cab in the following link disables also SMS Sent notification, so if you don't want to do that, you can use the other cab to enable it:
http://forum.xda-developers.com/showpost.php?p=2044965&postcount=22
But keep in mind that it will only work with WM6.1. The messaging app in earlier OSes doesn't support threaded (conversation style) SMS.
rondol1 said:
But keep in mind that it will only work with WM6.1. The messaging app in earlier OSes doesn't support threaded (conversation style) SMS.
Click to expand...
Click to collapse
if a noob like me did that in the WM6 not in WM6.1...and it dosent restart any more, stays in WM logo, what can i do?!?! i need the sms thats in the phone, and now i cant turn it on, and i dont want to flash again cause ill lose it....is there a way to start the phone like in safe mode so that way i can uninstall the program?!?!
thanks
spider_mg_zr said:
if a noob like me did that in the WM6 not in WM6.1...and it dosent restart any more, stays in WM logo, what can i do?!?! i need the sms thats in the phone, and now i cant turn it on, and i dont want to flash again cause ill lose it....is there a way to start the phone like in safe mode so that way i can uninstall the program?!?!
thanks
Click to expand...
Click to collapse
Oei, I think you have a problem there.... I can't think of a solution that will work after the damage is done. (All the Safe Mode utils I know have to be installed before the **** hits the fan).
Anyone..?
rondol1 said:
Oei, I think you have a problem there.... I can't think of a solution that will work after the damage is done. (All the Safe Mode utils I know have to be installed before the **** hits the fan).
Anyone..?
Click to expand...
Click to collapse
thanks...but this is #"$!"%"%|$#"§£@§£@
thanks again, anyone please?!?!?!
Thankz for the reply..! safe mode in wm6.1? hmmm...
AFAIK, there is no way to get anything when it won't boot up fully...
thanks to all...i did flash it again, and lose everything ((
in the process i put the new 6.1 ROM from Cloudyfa )) until Gollum dont release his new one ))
sorry again...but could anyone give me a link to safemode cab?!?! to use with WM6.1, cause i dont want to lose anything anymore
thanks
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
humrod said:
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
Click to expand...
Click to collapse
if still can power on,
1. force bootloader mode MANUALLY, listen, FORCE BOOTLOADER MODE MANUALLY,
ref= http://forum.xda-developers.com/showthread.php?t=353547
2. FLASH NVID,
3. FLASH MY 2a, it may flash the SPLASH into the correct address.....
Hope it helps..
Thankx for your answer. Casually, i was flashing your rom dioxda2 2A, but I make a mistake: when rebuild the nk.nkf (translate in spanish) i select the splash (92000000-Splash.nb) file instead extended rom (9b000000-Extension.nb) file. when finiseh flashing, at the firs reboot, the screen in black. in fact, the device don't respond in anyway...no power, no bootloader.
It seems very bad......
humrod said:
Thankx for your answer. Casually, i was flashing your rom dioxda2 2A, but I make a mistake: when rebuild the nk.nkf (translate in spanish) i select the splash (92000000-Splash.nb) file instead extended rom (9b000000-Extension.nb) file. when finiseh flashing, at the firs reboot, the screen in black. in fact, the device don't respond in anyway...no power, no bootloader.
It seems very bad......
Click to expand...
Click to collapse
Can it still enter the bootloader mode manually anyhow?
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
humrod said:
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
Click to expand...
Click to collapse
mm. If you cant go to bootloader mode. I think your Prophet is dead.
Sorry to hear it.
humrod said:
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
Click to expand...
Click to collapse
I mean to press and hold the comm manager button and same time pick the reset pt for one second,
Then only release the stylus and wait for the bootloader screen...
try ~~ hope it helps ~~
humrod said:
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
Click to expand...
Click to collapse
according to my opinion, if you experience of the matter like that on ur prophet, I think ur prophet is dead, same likes varanusvincent said...
Maybe, u can try with the others way to repair it..U can try, the dioxda2 methode...Perhaps, it can help u to get back ur prophet...I hope so...
Thanks...
Thanks for all your opinios, but it is really dead....
I make a mistake cooking the last room....
Bad times, good face.....probably going to Diamond....
I'm talking with vodafone.
See you soon
humrod said:
Thanks for all your opinios, but it is really dead....
I make a mistake cooking the last room....
Bad times, good face.....probably going to Diamond....
I'm talking with vodafone.
See you soon
Click to expand...
Click to collapse
I'm sorry to hear that.
I like the HTC Nike very much. I think i would go with that.
Try the charge trick (short the wires or something), dont know how, but some users reported that work.
I dont see why, but u can trie, nothing to loose.
Good luck.
Last night I received an alert on my phone stating "This copy of Windows Mobile expires within 30 days on 12/01/2009."
This morning I reloaded Da_G's 23420-fuze-uncompressed ROM and received the same expiration message.
Is there a fix for this expiration date or is someone working on it? I have attached a screen shot to show the message. My apologies for it not being clear, iPhones don't have the ability to take good macro photos.
Oh yeah, and I did a search and found nothing on the topic.
bkeitht said:
Last night I received an alert on my phone stating "This copy of Windows Mobile expires within 30 days on 12/01/2009."
This morning I reloaded Da_G's 23420-fuze-uncompressed ROM and received the same expiration message.
Is there a fix for this expiration date or is someone working on it? I have attached a screen shot to show the message. My apologies for it not being clear, iPhones don't have the ability to take good macro photos.
Oh yeah, and I did a search and found nothing on the topic.
Click to expand...
Click to collapse
From the looks of it, the shell wasn't patched during the cooking process. Odd, you say this is Da_G's ROM? Usually he is on top of things.
Wot daaaa :S
Try this: bump your calendar up a month, and see if the device pukes on you. It won't; the shell has been patched, but the notifications are still in the queue. You can delete the notifications with dotfred's task manager or sk tools.
Actually I am having the same issue!! Was using Baseline ROM and got the Error. I changed date to 1/1/10 and POOF WinMo is now gone =( cant use phone at all...... !!
What do you mean WinMo is gone? It doesn't start anymore? That is weird indeed. You should fash a new ROM and see what happens...
its gone as in a white message and everything is disabled.. cant even get rid of the expiration message..
Cant flash to new Rom cause comp wont even find it anymore when usb is connected.....ugh!
i had my phone disappear once You get a message that your version expired and then you can't enter any apps and data connections are disabled. All you need to do is force a hardware hard reset of the device - it was restore your ROM and you'll start the clock over. It's not fun but iut's better than a phone that's nonfunctional.
i think you need an patched shell32.exe, because yours is timebombed, but actually(since last week) i dont know where to get this patched exe...
which os build do you use? maybe i have one 4 you
maybe search this thread:
http://forum.xda-developers.com/showthread.php?t=544445
icythunder said:
its gone as in a white message and everything is disabled.. cant even get rid of the expiration message..
Cant flash to new Rom cause comp wont even find it anymore when usb is connected.....ugh!
Click to expand...
Click to collapse
Did you flash a Rom without first flashing Hard SPL?
If you have flashed with Hard SPL you should be able to run the boot loader by pressing Vol down button and reset at the same time, keep holding the Vol down button and the boot loader screen should load. You should them be able to connect to your pc and re flash another ROM.
Other than that if you have flashed a ROM without first flashing Hard SPL then you must have ignored all the warnings which strongly suggest that you could brick your phone. I hope this is not the case.
nice news
sorry mates but i really like this messages. coz i always hated wm6.5 and its honeycomb desıgn. may be it pushs cookers to make beauty wm6.1 roms
Farmer Ted said:
Try this: bump your calendar up a month, and see if the device pukes on you. It won't; the shell has been patched, but the notifications are still in the queue. You can delete the notifications with dotfred's task manager or sk tools.
Click to expand...
Click to collapse
The Timebomb is active! I bumped the calendar up and it froze up and locked me out. I can no longer use the phone. Below is the error message that I received.
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further information, please visit the web site that you used to obtain your current beta release."
eckki, I'm using Da_G's WinMo 6.5 23420-fuze-uncompressed ROM. Can you PM me the instructions and link me to the shell32.exe that is patched to prevent the timebomb?
audible_paradigm said:
Did you flash a Rom without first flashing Hard SPL?
If you have flashed with Hard SPL you should be able to run the boot loader by pressing Vol down button and reset at the same time, keep holding the Vol down button and the boot loader screen should load. You should them be able to connect to your pc and re flash another ROM.
Other than that if you have flashed a ROM without first flashing Hard SPL then you must have ignored all the warnings which strongly suggest that you could brick your phone. I hope this is not the case.
Click to expand...
Click to collapse
You can do what he said and you should also be able to flash from your SD card. Please say you have a card reader.
bkeitht said:
The Timebomb is active! I bumped the calendar up and it froze up and locked me out. I can no longer use the phone. Below is the error message that I received.
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further information, please visit the web site that you used to obtain your current beta release."
eckki, I'm using Da_G's WinMo 6.5 23420-fuze-uncompressed ROM. Can you PM me the instructions and link me to the shell32.exe that is patched to prevent the timebomb?
Click to expand...
Click to collapse
I'm 99% sure you can't replace the shell.exe file once a ROM has been flashed. It's something that has to be cooked into the ROM. Anyone have any success replacing the shell.exe after a flash?
silentP said:
I'm 99% sure you can't replace the shell.exe file once a ROM has been flashed. It's something that has to be cooked into the ROM. Anyone have any success replacing the shell.exe after a flash?
Click to expand...
Click to collapse
I'm re-flashing the phone now, so it will be back to normal in about 20 minutes. I guess we have ~30 days to get a fix for it.
bkeitht said:
I'm re-flashing the phone now, so it will be back to normal in about 20 minutes. I guess we have ~30 days to get a fix for it.
Click to expand...
Click to collapse
That sucks, hopefully you didn't lose anything. You going to stick with 23420, or trying another flavor? Have you tried your hand at cooking yet?
bkeitht said:
I'm re-flashing the phone now, so it will be back to normal in about 20 minutes. I guess we have ~30 days to get a fix for it.
Click to expand...
Click to collapse
I'm surprised that it snuck in; I've tested my 23081 build (which has the notifications), and the timebomb was patched properly. Maybe you should pm Da_G just so he knows. You can sometimes overwrite shell32.exe I believe, but it's not a great way to fix things. You're better off cooking in the patched shell.
HI, im using Energty 23016 25/10 and no message until now. I has sync with my phone and everything its normal...
Ofcourse I hard-SPL it, when I turne phone off and press vol down nothing happens.. can u please help how do I hard reset and re flash?
as in the tri color screen comes, just says RAPH 0.37 something.. no option to flash/undo lol.. HELP!
icythunder said:
Ofcourse I hard-SPL it, when I turne phone off and press vol down nothing happens.. can u please help how do I hard reset and re flash?
as in the tri color screen comes, just says RAPH 0.37 something.. no option to flash/undo lol.. HELP!
Click to expand...
Click to collapse
Ok, turn your phone off. Now, simultaneously hold vol down, hold the power button, and use your stylus to press the reset button on the bottom. That will take you to the tri-color screen. Plug your USB into your phone and reflash.