Hi, I have a problem.....this morning I have turned on my Tytn...and start in bl mode!
I have tried to reflash ,my device, process ok, but after "align screen" phone reboot and....only bl mode!
If I reset...start only bl mode!
What do you think?
Daniele
I'm assuming , of course, you have Hard SPLed your hermes.
Try checking for bad blocks with MTTY... If there is no problem, do a Hard reset. Hold down Left & Right Soft Keys and hit reset....This is like reflashing BUT it puts the same os on (doesn't need Hard SPL).
If you are trying out WM6.1 try flashing a stock rom first, then flash up to 6.1.
Hope this helps.. Cheers....
My tytn now work fine...but I don't know why!
Related
Hey Guys.
Have a little problem with my xda. I want to upgrade to WM2003 via SD-Card-Method, but i can not enter the bootloader.
I hold the power button and make a soft reset, but the bootloader screen did not appears. It make only a normal soft reset....
Tried also after a hard reset, but that didn´t change anything.
Last Rom-Update worked via Bootloader.
I user a cooked kitchen rom 3.17.03 with RSU 4.21
Any one got infos how i can "repair" it?
Regards
Stefan
If I'm not mistaken XDAtools can be used to reload your boot loader.
Check out the below thread for more info.
http://xda-developers.com/forum/viewtopic.php?t=2189
Download:
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
HTH
you need the tool discussed in this thread:
http://xda-developers.com/forum/viewtopic.php?t=2079
Thanks to all your answers....
Tried to flash the Rom via Programm A, but i get an Error.
Now the device is out of order. No function any more.
Neither a soft nor a hard reset returns the function.
Screen is "black" and nothing happens.
I wll call my insurance tommorrow to get a new device...
:roll:
Thanks for help, hread can be closed...
Regards
Stefan
I have one Tytn that was bricked while flashing Radio rom. I tried everything that I could find on this forum and nothing (flashing from Win, flashing form SD card, tried with mtty - no luck). When I try to flash any radio rom it stucks either on 0% or 12%. I could boot the OS, but the problem now is that I wanted to try one more thing - to downgrade SPL (it was IPL 1.04 and SPL 2.30 Olipro). I used Hard-SPL v7 first but it didn`t downgrade, and then I tried the procedure for downgrade from mrvanx, frist with Hard-SPL v2. And then I was shocked. After the flashing procedure was 100% complete the device turned off, and now I can`t turn it on. I removed the battery for couple of minutes - nothing. It`s dead. It is like there is no battery (it is not the battery, i tried with another one that works), nothing happens when I press the power button.
Did someone had this problem. Is there any hope it could work. If I can`t bring it alive, could the HTC service do it???
Sorry for opening this topic that fast, but i was in a shock when it happened. I succedded to bring it on, I didn`t know that hold the reset button longer! Maybe this could use to someone. Never give up
Mixa84 said:
I have one Tytn that was bricked while flashing Radio rom. I tried everything that I could find on this forum and nothing (flashing from Win, flashing form SD card, tried with mtty - no luck). When I try to flash any radio rom it stucks either on 0% or 12%. I could boot the OS, but the problem now is that I wanted to try one more thing - to downgrade SPL (it was IPL 1.04 and SPL 2.30 Olipro). I used Hard-SPL v7 first but it didn`t downgrade, and then I tried the procedure for downgrade from mrvanx, frist with Hard-SPL v2. And then I was shocked. After the flashing procedure was 100% complete the device turned off, and now I can`t turn it on. I removed the battery for couple of minutes - nothing. It`s dead. It is like there is no battery (it is not the battery, i tried with another one that works), nothing happens when I press the power button.
Did someone had this problem. Is there any hope it could work. If I can`t bring it alive, could the HTC service do it???
Click to expand...
Click to collapse
I have your same promblem..
Once downgraded to old spl you were able to upgrade the radio rom?
Is it correct?
I thought that I will be able, but it seems that my radio bootloader is corrupt. I am reading now the forum, and I think (if I understood it) that I have to write raw radio rom (.nb file). Am I right? Anyone!
Can anyone please post a guide on how to flash Hard-SPL onto my HTC TYTN.
The guide for installing Hard-SPL onto the HERMES is not available anymore, and i am EXTREMELY confused about what im doing, and i am afraid i will brick my phone if i do something wrong.
Please please please help!
Read the sticky, first post on this page.
It really isn't hard to do. But be sure you know what you are doing btw. SO read the sticky!
Basically you just download the flavor of Hard SPL you want (I used 2.10 which I can recommend, very easy to downgrade to factory SPL again as I just learned!).
After download unzip the folder and run the RUUWrapper. Follow instructions exactly, do nout unplug your device etc. and it should work like a charm. It takes about 1 minute!
If you don't know what you are doing or you are still doubting, wait for Mr Vanx site to come online again or don't flash. There is always a risk you screw up and end with a $500 brick.
So use at your own risk!
Download hard spl v7 from
http://forum.xda-developers.com/showthread.php?t=296722
thanks guys i did it
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
puca said:
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
Click to expand...
Click to collapse
start the device in bootloader, what is displayed?
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Rockford_622 said:
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Click to expand...
Click to collapse
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
hi mrvanx
thanks for your reply after checking the bootloader it has changed to 2.10 olie it did it so fast i thought it had failed will check properly next time and have successfully flashed it to crc 9 and it runs great thanks for all the help
mrvanx said:
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
Click to expand...
Click to collapse
I appreciate your reply Mr. Vanx. Same as with puca, I put my phone into the bootloader mode and it does indeed show the correct 2.10 Olipro version. This is the 3rd 8525 I have had and I could have SWORN it took much longer on the first 2. Even the update from WM5 to WM6 seemed to take much less time with this particular phone. Guess I shouldn't really complain
Downgrade Error 260
Hi Mr Vanx I have followed your guide to downgrade my current SSPL (2.10 Olipro) to SSPL (1.11). But I keep getting error 260. I have followed guide step by step.
I have even tried flashing from SD-Card (by renaming to HERMING.nbh). Process runs successfully, but nothing happens.
Its still showing SSPL-2.10 Olipro in bootloader. Am I missing anything?
Thanks
can some one point me to the guide. I am facing a NO GSM problem on vodafone VPA 1605 with following config:
ROM Version: 1.20.161.6
Radio: 1.03.06.00
CID: VODAP001
Bootloader: 1.04
I do not see the radio version or the IMEI. So I would like to do a HARDSPLv7 followed by Radio ROM update to 1.06.00.10. I hope this will work. Seniors may help with their sggestion.
Can someone help me with the guide to HARDSPL as I am doing it for the first time and the guides are not available at MR Vanx site nor can I locate the sticky?
regards,
H
have you read the first page?
cant uprade from spl 1.40 to 2.04
am using hermes 300 and i want to uprade from 1.40 t o 2.40 but i cant do it.i ve tried can anyone help
dania
How to hard reset without win
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
majida said:
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
Click to expand...
Click to collapse
you should try the hard reset iMate 9502 posts by martin_yo in http://forum.xda-developers.com/showthread.php?t=407336&page=2
Code:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
but !!
With many thanks Hakim
But I know hard reset of my phone, I did it many time before, unfortunately it dosen't work this time. I tried all I knew about hard reset. but I couldn't do anything for my phone.
I tried (FN+Green+power like last time I did hard reset easy)(FN+Green+reset button)It don't sho any reaction.
Please help me.
hi guys
I have a bricked hermes
DOPOD 8525 -> WM 6.1 Professional
From bootloader screen
HERM100 IPL-1.01
bootloader SPL-1,40.01ipro
Tried to flash ROM using safe SSPL with RUUwrapper.
At completion of flash both my mobiler & win mobile device centre disconected or lost connection with device, after soft reset will only load up to second HTC screen. How can I recover from this brick? device manager recognises HTC usb sync when plugged in but I can't connect to re flash rom.
Reading helps my friend
Get to bootloader, press ok and power on left and right respectively and stick stylus in all at same time.
that should bring up tricolour screen.
Download your imate jasjam official ROM
EDIT i think you got a dopod so the dopod ROM is what you want from my 4shared or wiki!!
from the wiki or from my 4shared, and flash it while it is in boot loader mode.
then you need to flash hard spl one of the first stickys on this thread that you have just posted to.
Then flash your desired rom.
Thank you Zocster
Got it unbricked & working, thanks to you I have a lot of trouble reading as I am leagally blind but get by with T2V & magnifiers most times. however searching threads is a lot harder than for most.
thanks
Lou
PS if you ever cross the tasman drop me a line
loulian, to make it easier to recover from bricks, It would be best if you flashed Hard SPL V7 from here - http://forum.xda-developers.com/showthread.php?t=296722
It won't guarantee a flawless flash but will help if something goes wrong by giving you a GOOD chance of recovery.
You can then use the sd card method and make life easier by not having to worry about pc crashes, cables being pulled, blackouts or those annoying "sync" errros.
Cheers...
Also if you have trouble setting up your Hermes after a flash/hard reset because of the alignment points being hard to see, It would be a good idea to download this -
http://www.codefactory.es/en/downloads.asp?id=44
It will, after you save the settings, allow you to use your PC to set up the Alignment point if you need to Hard Reset or flash your phone making it load the os to the today screen.
zocster said:
Reading helps my friend
Get to bootloader, press ok and power on left and right respectively and stick stylus in all at same time.
that should bring up tricolour screen.
Download your imate jasjam official ROM
EDIT i think you got a dopod so the dopod ROM is what you want from my 4shared or wiki!!
from the wiki or from my 4shared, and flash it while it is in boot loader mode.
then you need to flash hard spl one of the first stickys on this thread that you have just posted to.
Then flash your desired rom.
Click to expand...
Click to collapse
Sorry to ask a stupid question. I have the same problem, but when i try to flush it from a TriColor mode i get a communication error, it complains about activesynch not connected. BTY mine is cingular 8525 so i am trying to use one of the cingular roms.
Hello
I try to upgrade my second HTC Fuze, as same the first one I follow step by step the upgrade process for using TAEL ROM
ROM your trying to flash
TAEL ROM v3.23518
Is the device HardSPL'ed
Yes
Is the device unlocked
Yes
Flashing via USB or SD-Card
SD Card
Phone freezes on the splash boot image, with no option to enter to the bootloader mode.
How can I revive?
Pull the battery for a bit, then put it back in and either soft reset or go into bootloader. The phone should be fine IF you do have hard spl on it (1.90 Olinex, not some other hard spl. If it's another one, the phone is dead.). Then just flash another rom, or re-download Tael's rom. Weird stuff happens if you flash enough. I've had my phone do something sort of similar before, where I couldn't get into bootloader. You may need to soft reset, then let it boot to the alignment screen, then put it in bootloader. Don't worry, it will be ok, hard spl is your parachute.
Thanks you Ted...3 minutes ago I press low volume and power it..and the tri color appeared again....I'm downloading the last rom,
Thanks again
Great my phone is alive again...with the last TAEL ROM
You are right the HARD SPL is the parachute!
Thread close ?!
Thread closed ... another Fuze saved.