hi , i lwant to install a new rom on my device (niki is my first win mobile device), but i'm a really newbie and i dont know what to do to install it! Would u help me saying what i have to flash and to install the rom correctly on my niki (without breaking it ) ? I've read all the sticky and i've tried to search in the forum but i've not understand what to do !
Thanks a lot guys
me too =( so many thinks dont understand..
can someone explain us step by step how to flash the device and install a new rom (i want to try the new tom codon rom)?
Before you start anything,
know that you will void your warranty if you send in your device with a different SPL and rom that it came loaded with, you should know how to revert back for warranty reasons. If you dont want to risk anything, I recommend not continuing. If you are unsure read the threads completely until you are comfortable.
This is just a simple starting piont and not a guide.
Use this post to find the threads to help unlock, update your HardSPL and flash your rom. I know the ropes somewhat but I may be a little off, since I havent done this in awhile, but here is the gist of it.
First thing you should do is check to see what device you have.
To do this take you battery off and look for a model number (i.e. NIKI100, NEON200 or NEON300) This will tell you what device you have and what Roms are available to you. Niki100 is the most common
After that you need to find out if you device is carrier locked
and if so I beleive you need to unlock it. It wouldnt hurt anyways to have the device unlocked. This allows you to use your phone on any supporting network. These locked devices are generally branded by cell phone companies like Orange or Tmobile ect.. If you have a straight HTC device more than likely you are not locked to a network.
Next you will need to update your USPL or HardSPL
by following this thread by jockyw2001 - If you can not figure this thread out, you may want to consider not flashing your device because there is always risk involved in damaging your phone especially if you dont know why and what your are doing.
http://forum.xda-developers.com/showthread.php?t=355730
Now you can flash a rom that is compatible.
Check the Rom that has been developed for guides and read the all the post for problems before flashing. This is important because alot of the Roms may be a Beta meaning they have bugs to be worked out, plus it makes other user's happier that you dont ask alot of questions that have been posted before. Make sure that the Rom will be compatible with your device (NIKI100 or NEON200 ect..)
Please continue at your own risk, I can not be responsible for errors and bricking you device. I am just tyring to give you direction to start.
Hope this helps and good luck - Thanks
Jcostanza4
htc touch dual tim
same problem ,i m new here?
how to install dutch rom .
plaese step by step
Related
does it take off everything that is on the rommy thingy?...or what...and f i want to just install it do i have to cid unlock?...( i got aa g3 now) or do i shelltool it...
lets say im going to download farias real thing...to get everything do i install it regular...or shelltool it?
From your questions, you really shouldn't be doing anything with your phone before reading the wiki on this and taking some time to read the forums a bit closer.
i didnt ask that...if u cant answer my question just say so,,,thanks for trying
TaurusBullba wasnt being mean. TaurusBullba was pointing out a few honest truths.
Hypothetically speaking, if someone doesnt know what shelltool does, despite their being a thread with almost 300 posts on using the shelltool then they are obviously not ready to flash anything yet. Furthermore if someone doesnt know which devices the shelltool is designed for then they have again demonstrated that they are not ready to flash their expensive device.
Do as TaurusBullba said and be thankful someone took the time to answer your question in a civil manner.
killacam13 said:
does it take off everything that is on the rommy thingy?...or what...and f i want to just install it do i have to cid unlock?...( i got aa g3 now) or do i shelltool it...
lets say im going to download farias real thing...to get everything do i install it regular...or shelltool it?
Click to expand...
Click to collapse
Just CID unlock your G3, you dont need shell tools for that.
i dont want to cid unlock it..and i cant...hence the reason im using shell tools...i have read the thread before but was looking for clarification...sorry for asking...and the fact that there are 300 posts makes it even easier for some1 not 2 read all the posts...to get all the information...i ditnt think anyone would read all the post to make sure there perfect with it..hence the reason all people can make threads...to post finds...and questions...and again i say...i cant cid unlock my device...does it take off everything that is on the rom?...or what...and if i want to just install the rom the regular way do i have to cid unlock?...( i have a g3 now) or do i shelltool it...lets say im going to use farias real thing...to get everything on the rom do i install it regularly...or shelltool it?
__________________
CID unlock your phone and install the normal way. There isnt much point using shelltools with a G3 when you can just unlock it.
killacam13 said:
and the fact that there are 300 posts makes it even easier for some1 not 2 read all the posts...to get all the information...i ditnt think anyone would read all the post to make sure there perfect with it..hence the reason all people can make threads...to post finds...and questions__________________
Click to expand...
Click to collapse
The reason some threads are 300+ posts long is because so many topics are covered, so many questions are answered. By reading all the posts in the thread you might find your question is already answered, conversely by not reading all the pages you might miss something very important. For example imagine if someone didnt read the shelltool thread and missed the discussion about the virus version of shelltool, what kind of trouble would they be in then?
so i take it we should read every single page...no thanks
killacam13 said:
so i take it we should read every single page...no thanks
Click to expand...
Click to collapse
Just the kind of attitude that leads to you not knowing what shelltools does.
i think asking him to read 300 plus pages of anything is asking too much. And he is right that we all can post threads for a reason. But still most of the info he is seeking can easily be answered by reading the first page of the original shelltools thread.
personally i hate when people say "just unlock it" because people like me who can't void the warranty can't unlock it (i have a g3, but used shelltools to try and keep the warranty) This guy has read enough to know that it doesnt cid unlock your device.
to answer his original question, im pretty sure it just flashes the os and ipl and spl or anything (thats what happened with mine) Ive used nottosmarts and xplore with no problems with it. I say just try it and see if you get the full effect.
I see the users frustration with questions such as this, but this is a forum thats known for the way it is always willing to help a new user out. All we ask is the new user just does some research and not be baby fed.
And killacam even if there is a hint of attitude, they just dont want you to brick your phone, so take take it too much to heart
The issue here is that 99% of the people asking about shelltools are people that shouldn't be flashing their phone. You may be one of the exceptions but the lack of information in your posting about what you do know makes it hard to judge.
The fact is that even shell tool (and any unauthorized tool for that matter), can "brick" your phone and most of the time (read a few threads) people blame the people posting these tools. If you are worried about warranty then you should just be happy with your phone's built in OS.
happyware said:
The issue here is that 99% of the people asking about shelltools are people that shouldn't be flashing their phone. You may be one of the exceptions but the lack of information in your posting about what you do know makes it hard to judge.
The fact is that even shell tool (and any unauthorized tool for that matter), can "brick" your phone and most of the time (read a few threads) people blame the people posting these tools. If you are worried about warranty then you should just be happy with your phone's built in OS.
Click to expand...
Click to collapse
are you talking to me? Why should i be happy with the packaged OS? Why can't i use a workaround that was developed from someone in these forums? In fact, i dont see a reason why anyone wouldn't use shelltools because of the fact that it saves the warranty.
Oh and a lot of programs can brick your phones, even the basic rom update if it's used in the wrong manner. And i don't like the way you went about this post; next time you need help maybe you shouldn't ask it, because that's apparently what you would like everyone else to do. I agree that he shouldnt have looked more at the shelltools thread, but to make a statement about me doesn't make sense.
It's never asking too much of a person to do things if he really wants to do it. Anyway, he doesn't have to read through the whole 300 pages as not every page has the information he needs, just browse through it mate and look for your magic keyword "G3"...
It was worth the 300 pages though, believe me, if I didn't I woundn't be using Core2.0 right now..
i dont think there is a warranty issue here since he wants to upgrade his OS and that would void his warranty (or not?)
the only way to learn is READING and if he doesnt want to read and expect someone else to do it for him thats a bit lazy on your part but here is my advice.....
1)if you can CID unlock your device (if you dont care about your waranty do it) this way you wont have any issues when upgrading to a different ROM
here is a link for some good info about cid unlocking http://www.htcwizardweb.net/node/170
or here you will find lokiwiz
http://forum.xda-developers.com/showthread.php?t=249474
2)if your question is what exacly Shell too does (what it does to the .nbk file) thats a question that you shouldnt be asking since you havent been able to flash a rom and that a question for a more experienced user.
3)read the first page of the Shell too thread that should answer all your questions if not be more specific about what you have done and what you can and cannot do this way we can help you directing you to the treads that might help you
4)and if none of this have help you you can PM me. i have flash several G3 and G4 devices and havent bricked any one of them.
As you can see i dont post as much im more of a Reader (the only way to learn) i usually dont post to ask but to help...thats why this forum is wonderful ...hope i helped in some way if not search....read this forum and google are your best friends
kurtslashmx said:
i dont think there is a warranty issue here since he wants to upgrade his OS and that would void his warranty (or not?)
the only way to learn is READING and if he doesnt want to read and expect someone else to do it for him thats a bit lazy on your part but here is my advice.....
1)if you can CID unlock your device (if you dont care about your waranty do it) this way you wont have any issues when upgrading to a different ROM
here is a link for some good info about cid unlocking http://www.htcwizardweb.net/node/170
or here you will find lokiwiz
http://forum.xda-developers.com/showthread.php?t=249474
2)if your question is what exacly Shell too does (what it does to the .nbk file) thats a question that you shouldnt be asking since you havent been able to flash a rom and that a question for a more experienced user.
3)read the first page of the Shell too thread that should answer all your questions if not be more specific about what you have done and what you can and cannot do this way we can help you directing you to the treads that might help you
4)and if none of this have help you you can PM me. i have flash several G3 and G4 devices and havent bricked any one of them.
As you can see i dont post as much im more of a Reader (the only way to learn) i usually dont post to ask but to help...thats why this forum is wonderful ...hope i helped in some way if not search....read this forum and google are your best friends
Click to expand...
Click to collapse
no, upgrading the OS through shelltools will not void the warranty. (that is if you change it back before you send it in for repair )
i agree with pretty much everything you said, and that's one thing people need to learn, is that if you read a little bit, things will just absorb and you will then gain some knowledge. these are expensive little machines to be messing around on lol.
The Real Thing won't work on it
You can try, but Faria's Real Thing won't work on a G3 CID-locked device using ShellTool. I tried already. What I did was just CID-Unlocked my G3 a few days ago. If you need to send it in for repairs, you can always lock it back up using the CID-unlocking software called Lokiwiz. Then you can just use the RUU to flash the image
Hi all
I read a few bits on updating the vario 2 to windows mobile 6 Black 3.0.01 is that right ?
Can someone tell me more about what this actually is, I also read the tutorials on about upgrading the.
IPL and the SPL what are these and what is version 2.10 olipro also and the last thing is what does it mean when it talks about CID and not reading it. What effect does this have ???
I know the T Mobile bundled stuff is no use so what functionality will I have with this Black 3.0.1 and is that the best version for me to use or do you recommed a different version ???
Help Please I dont want to brick it.
Ska
skauk said:
Hi all
I read a few bits on updating the vario 2 to windows mobile 6 Black 3.0.01 is that right ?
Can someone tell me more about what this actually is, I also read the tutorials on about upgrading the.
IPL and the SPL what are these and what is version 2.10 olipro also and the last thing is what does it mean when it talks about CID and not reading it. What effect does this have ???
I know the T Mobile bundled stuff is no use so what functionality will I have with this Black 3.0.1 and is that the best version for me to use or do you recommed a different version ???
Help Please I dont want to brick it.
Ska
Click to expand...
Click to collapse
Can't believe no-on has said this already... but you need to read the Wiki and do lots of searching / reading through the forum.
It's good that you don't want to brick your device. Research the topic by reading what is already there... no need to ask the same questions again
The WIKI will explain bootloaders and flashing to you. link in the brown bar at the top of the page, it says XDA-Wiki, click it look for the picture of the hermes device and click it. There is a wealth of information there for everyone's use.
As far as what functionality you will have with what rom - read the first post in the rom thread. The cooker will usually have a detailed list of included/removed items from the rom. Only you can decide which rom is the best for you, everyone uses their device differently and as such everyone has different ideas of what a good rom is.
Lastly, if you don't understand anything read before you start to flash. The Hermes isn't as forgiving as other devices when flashing and you could very easily ruin your device if you don't take some standard precautions. The awesome people in this forum have come up with tools to help you recover from just about every form of bricking, but nothing can save you from not having a plan ahead of time.
I suggest after you read the Wiki, that you start with the Olipro Hard-SPL before you flash anything else to your phone. And as always ask yourself why you need to upgrade your device. If the answer isn't substantial and you aren't prepared to lose the device due to a bad flash or just plain bad luck you shouldn't flash. Again if you are prepared ahead of time flashing is relatively safe, but if you jump in without knowing what you should, you risk ruining your device.
I have a hurricane and i would like to upgrade it to WM6.1..
But now i want a guide! Because the last time i just did it, i bricked it.. The SPL flash went wrong and now the hurricane is dead.. completely dead.. But unfortunally i have another one i wish to try it on but i need an exact guide..
And then i suspect my other hurricane to be some kind of prototype.. I flashed the "patched_ruu" and it went fine but after that i just got a white screen and now the device dosn't work.. I have tried to get help but as it seems it is not repairable.. So i would like to know if the device i have is a "genuine" hurricane? How can i check that?
The other hurricane i had was not branded.. Nothing was stated on the cover.. The one i want to flash now is branded "Qtek 8200" and the splash screen says "Test Only - Not for sale"
Can somebody help me here ? Iam afraid to brick this device too !
Guys damned i need some help here !
There are more than enough upgrade guides. Just look into the longer WM5 or WM6 threads and make sure that the ROM you downloaded really is intended for your device. Don't just assume and better check twice. HTC devices have confusingly many codenames and are sold under dozens of different brand names. Even some people writing guides confuse one or the other model.
Sorry, I know this is the answer you just didn't want. But reading the threads provides just the kind of information you need if you don't want to brick the second phone.
Regards,
Dirk
Spades01 said:
There are more than enough upgrade guides. Just look into the longer WM5 or WM6 threads and make sure that the ROM you downloaded really is intended for your device. Don't just assume and better check twice. HTC devices have confusingly many codenames and are sold under dozens of different brand names. Even some people writing guides confuse one or the other model.
Sorry, I know this is the answer you just didn't want. But reading the threads provides just the kind of information you need if you don't want to brick the second phone.
Regards,
Dirk
Click to expand...
Click to collapse
I assumed it was a rom intended for my device, cause the rom i downloaded was in the WM6 from this forum.. The guide in the thread i found isn't very desciptive.. Others have downloaded and got it to work on their device but somehow i did something wrong OR it could be because my device was a sample.
No one with a little spare time ?
hello everyone!
i have bought a HTC Hermes from eBay and hopefully will receive the device soon. As I want to be prepared, when my new toy arrives, I have already started to read thru the Wiki and the Forums! I know, that the experts, which have been posting here for years now, want every beginner to RTFW and to use the search function and so on. What some mebers here don't seem to understand, that such a huge amount of information, which is often unstructured, easily misunderstood and/or simply outdated, is almost impossible to overcome!
personally, i am sure i learned a lot by reading thru xda-devs for sevreal days. but nevertheless, all this different information leaves me just confused and unsecure. seriously, i dont want to take any chances of bricking my pda!
so my appeal is to sum up some basic information regarding flashing & upgrading. and to make sure that i dont make any mistakes i ask all of you to correct me if i am wrong (which i am most likly going to be a couple of times).
ok. lets go!
basically i believe, that since latest developments
( --> "Free HTC Hermes SIM & CID Unlocker *New* version v3a" & --> "Hard-SPL V7"),
almost all Hermes versions can be UNLOCKED & UPGRADED safely, regardless of what bootloader version they are running....
true?
so all I need to upgrade to my phone to the latest versions is
HardSLP, the UNLOCKER and the ROMs I want to install!
true?
using those new tools mentioned above, downgrading to official 1.04 SLP rom versions (?!) to upgrade IS NOT necessary anymore.
true?
if my phone is once prepared with the two tools mentioned above, it is ready to get flashed again and again.... using those tools is a one time thing, which has to be done first time flashing.
true?
i have some questions as well you could help me with!
in what order should I start working?
what are the first steps? (which tool is used first?)
what are the major mistakes i could make to brick my device, even if i use the newest tools...?
i really hope that some people will understand my problems and try help me!
i would really like to contribute to the forums and if this wokrs out as i imagine, it could result in a new and up to date beginners guide!
thanks for reading!
please help!
regards,krz
Personally....
1) unlock as I believe it actually upgrades your SPL to 1.40. This is fine BUT if you've put Hard SPL ver 7 on then you have to run it again.
2) Hard SPL Ver7. You can put version 9 on BUT its for developers & really doesn't help the person who wants to just flash. It also throws up an error message after flashing that can be worrisome. No problem but apparently it needs fixing.
3) Find a rom you like - Only a hermes rom... If you find a rom you like for another Phone and they try to flash this you can be assured of an instant brick. Its like throwing an english speaking person into another country where no english is spoken. BIG TROUBLE... and unlike a person, the phone won't adapt and learn.
Check the forum for a rom you like, I can guarantee there is no "perfect rom" and sooner than later something else will come along that MUST be tried... Start with wm 6 as these are known to be stable and cut your teeth with these before venturing into the deep waters of 6.1. When you're confident flashing and troubleshooting these, then try wm6.1 as some work and research will/may be necessary to get these roms working stable.
4) Have fun....
Cheers...
thank you ultramag69!
unfortuneatly, noone else seems to want to help me here...
well, i'll keep on trying...
i had time for some further reading.
it seems, that I would not necessarily need the HTC Hermes SIM & CID Unlocker, if my phone was NOT simlocked.
instead of that, i could use the latest version of HardSPL to make it SuperCID!
RIGHT OR WRONG?
[btw: what excacty is the difference between SPL & MFG? what is a mfg anyway?]
I found THIS GUIDE while reading the forums.
* Housekeeping
* Flashing HardSPL
* Upgrading the Radio
* Upgrading to ______ WM6
* Programs and Settings
no matter what ROM version, bootloader, radio, etc. my phone is, following this guide would always work!
RIGHT OR WRONG?
if NOT, when wouldn't it?
what exceptions are there?
again, please be so kind and comment on this. i would realy be glad to be absolutely sure in what i am going to have to do!
there is still some insecurity left, please help me to make things a little clearer for me!
thank you in advance!
regards,
krz
Try reading 1st age of this thread.... Guides by MrVanx... http://forum.xda-developers.com/showthread.php?t=299462&page=34
As for Hard SPL, you can flash ANY HERMES rom... DONT TRY TO FLASH ANY OTHER ROMS.... Also, remember always that Hard SPL ISNT a guarantee not to brick your phone, its a safety net to help you when (and if you get to flashing alot) things go splat. It means that fixing a brick is put back into the realms of possibility instead of you now owning a very expensive paperweight. Please remember too that upgrading your radio rom is the riskiest thing to do on your hermes. most bricks come about because the radio rom gets corrupted & CANT be fixed... Hard SPL or no...As the saying goes, "if it aint broke, don't fix it". depending where you are in the world depends on which radio rom is best... research first and dont overflash this. If in Oz then 1.54.30.10 is selected by Testra. Seems to be ok...
Hope this isnt too much for you to digest...
thank you again ultramag!
ultramag69 said:
Try reading 1st age of this thread.... Guides by MrVanx...
Click to expand...
Click to collapse
i have read thru this, thank you.
but what does "reading 1st age of this thread" mean?
ultramag69 said:
As for Hard SPL, you can flash ANY HERMES rom... DONT TRY TO FLASH ANY OTHER ROMS....
Click to expand...
Click to collapse
that's clear. of course i meant any HERMES Roms regardless of version number, etc. ROMs of other devices (eg. Wizard, Kaiser) are of course NOT compatible...
i just wanted to double check, that downgrading to a certain bootloader is not necessary anymore in times of HardSLP v7...?
ultramag69 said:
Please remember too that upgrading your radio rom is the riskiest thing to do on your hermes. most bricks come about because the radio rom gets corrupted & CANT be fixed... Hard SPL or no...
Click to expand...
Click to collapse
i'm curious, why upgrading the radio ROM is that riskiy or some much riskier that upgrading the windows ROM for example. is it only, because it can't be fixed when flashing goes wrong? or is flashing the radio rom more likely to go wrong than flashing WindowsROM ?
ultramag69 said:
Hope this isnt too much for you to digest...
Click to expand...
Click to collapse
not at all!
keep it coming!
whats "wrong" with my tries to get a RIGHT or WRONG for my assumptions...?
noone seems to feel the need to answer that?
thanks again,
krz
Just the guides... Helped me lotsa times...
Downgrading your SPL from 2.10 isn't the best idea if you are gonna flash a lot a It is a safety net. If you do want to downgrade SPL you can, there is a guide in the wiki.
When the radio rom upgrading goes wrong it seems to be that the memory itself becomes corrupted. There are plenty of "fixes" BUT they seem to work erratically. The os is completely wiped and rewritten and doesn't seem to be affected by these "unrecoverable bad blocks". It can still be screwed up but is more tolerant of errors and can be repaired easily enough using MTTY(do search on wiki).
Read some of the posts about people who've bricked their phone & you'll see that MOST people who cant recover their Hermes have screwed up their radio... ie. phone displays "No GSM". Most can still use the PDA part of the Hermes BUT it won't make calls again so is considered a brick.
Most cooked roms DON'T contain the radio rom.
As for "Yes/No Answers", Yes you are partially right and no, you are partly wrong. Did that clear that up???
ultramag69 said:
As for "Yes/No Answers", Yes you are partially right and no, you are partly wrong. Did that clear that up???
Click to expand...
Click to collapse
totally!
i know that i know nothing!
anyways, thanks for trying. i think it kinda worked....
i flashed the Blue Angel and the Wizard a couple of times without any problems... my PC even crashed once while flashing the wizard.... fortuneatly i could reflash it afterwards..... i thought flashing the HERMES could be more of a hustle... ?
regarding the RADIO ROM: i guess, i will avoid flashing the radio too often!
btw: i am from AUSTRIA, Europe, and I am using the telering/t-mobile network!
recommending me a good RADIO ROM for telering/t-mobile austria would be very much appreciatiaed!
after all, flashing from SD card instead of flashing via an USB connection seems to be recommendeable regarding safety issues! i shall consider that as well!
breaking it down:
1) use HardSPL to upgrade ROMs (instead of downgrading to official SPLs, which are flashable...)
2) dont upgrade the radio too much. find the best one for your provider, flash it once, keep it if it works!
3) safety first! use the SD card for flashing instead of the PC and USB connection.
aight?
krz
Soon grasshopper, you will take over.....answering these questions...
As for radio rom, sorry, but I'm in Australia, ass end of the world where all the crap phones turn up. REALLY happy to find a FANTASTIC phone in the Hermes.....
hello again....
i want to start flashing soon, but there are still some things unclear.
regarding the AKU: i read about AKu in the forums, but i am still not sure about it....
when i upgrade to windows mobile 06 for example, is there a AKU included?
only in official ROMs?
or do i have to upgrade AKUs seperatly?
could anyone at least briefly answer my questions and maybe even try to explain the whole AKU stuff for me again...
would be awesome!
thx in advamce
krz
ps: the more i read in the wiki, the more confused i get... all this outdated information is confusing me more and more... it is really hard to catch up here. specially when all u get is a "gofckyourselfandreadthewiki"-post
KRZTF said:
hello again....
i want to start flashing soon, but there are still some things unclear.
regarding the AKU: i read about AKu in the forums, but i am still not sure about it....
when i upgrade to windows mobile 06 for example, is there a AKU included?
only in official ROMs?
or do i have to upgrade AKUs seperatly?
could anyone at least briefly answer my questions and maybe even try to explain the whole AKU stuff for me again...
would be awesome!
thx in advamce
krz
ps: the more i read in the wiki, the more confused i get... all this outdated information is confusing me more and more... it is really hard to catch up here. specially when all u get is a "gofckyourselfandreadthewiki"-post
Click to expand...
Click to collapse
You're just getting information overload, If you searched for "What is AKU" using google you'd have got this http://forum.xda-developers.com/showpost.php?p=1445514&postcount=1
Just follow Mr Vanx's Guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26 or else http://forum.xda-developers.com/showpost.php?p=1186163&postcount=1 from start to end & you should have a successful flash. This link is also very handy for beginners http://forum.xda-developers.com/showpost.php?p=1465974&postcount=1
Just remember if you intend to flash one of the WM6.1 Roms, many of the members feel that it is best to flash an official carrier Rom before flashing your selected Rom to prevent H/R issues. Happy Flashing!
So I don't know much about this stuff, the extent of my knowledge is how to get a .cab on my phone and install something like Manilla 2D on my HTC Touch Dual(model no.: NEON400).
I saw this thread: ttp://forum.xda-developers.com/showthread.php?t=567027
which is pretty much what I am asking.
Can so please give a more detailed tutorial on how to do all of this stuff about HardSPL and Radio and stuff? If you need to know what rom I am looking at putting on my phone it is this one:
ttp://forum.xda-developers.com/showthread.php?t=591274
Sorry for being such a newb but I just don't want to **** up my phone.
*PS: I had to remove the h on the url due to the new member link restriction.
-Please use the 'Search' function first, and check the manuals already made available for the Niki.
-First read the manuals completely and follow the steps meticulously..!
-Before posting your questions, remember that everything you need to know, to flash your device, is probably already made available for you on the board.
-Take your time to find out what you need to know before you flash your device, or you 'will' brick it..!
I can't hspl my Neon400 using the same things as used for the Nike, I've tried and it does not work so this thread is obsolete. But thank you for acknowledging my trouble and taking the time to try to help.