Related
evrey time I try to flash my rom I get an error messege
Code:
ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype
any clue I flashed it once with one I made from the kitchen and it worked ok now well you see the error any help would be great.
I'm nearly sure you have used a t-mobile ROM on your device. These ROM prohibit flashing with other version via active sync. You have to flash via bootloader and SD-Card.
Instructions how to do this you can find here:
http://lumpistefan.dyndns.org/tools/sd_flash.htm
http://lumpistefan.dyndns.org/tools/sd2_flash.htm
HTH
Stefan
well the one I had flashed to it was a 2003 final image i made in your lovely kitchen, By the way that is awsome peice of codeing. and it worked but I couldnt get it to take another, so I did the SD flash and downgraded back to a 2002 image and it workked and I did an active sync flash and put it back to 2003 lol but it seems when I put a 2003 image on it the only way for me to flash it again is to do the boot loader method. its kinda odd
but thanks.
Do you know of any tool to get better signal strength? like a hack to controll the out put of the radio?
!!!BE SURE THAT YOU DO SOMETHING AT YOUR OWN RISK!!!
!!!FOLLOW MY INSTRUCTION FOR STEP BY STEP!!!
I want to say that Im not a real programmer, I found some way to flash CID LOCKED device and wrote only shell (with userfrendly interface) and collected some useful tools.
Special thanx to itsme for his tools (if i dont mistake...)
WARNING!!! IF YOU WILL SEE CMD WINDOW DON’T CLOSE IT!!!
WARNING!!! DON’T TOUCH YOUR PC OR DEVICE WHILE FLASHING!!!
With this tool and my instruction you could:
1) Get info about ROM
2) Extract only OS from whole nk.nbf
3) Flash this OS to your G3/G4 CID LOCKED Device (even wm6 rom or latest aku 3.3 rom).
In atachment there are:
1) ShellTool.doc - instruction. Read first and please, follow it step by step!!!
2) ShellTool.exe with some other files that it need
3) Cert_SPCS.cab/EnableRapi.cab - should be installed on your device
I tryed to flash diffrent rom to g4 CID LOCKED DEVICE and its were flashed on it and worked perfect. Have fun
_________________________________________________________________________________
If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom. ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!
_________________________________________________________________________________
ChangeLog:
1) Several bugs were fixed. Now you can flash OS from every rom you want
http://rapidshare.com/files/53678765/ShellTool_bugfixed.rar.html
Uploaded it to XDA developers:
ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/img-27361-ShellTool.rar
Great job! gonna test it soon.. Does it also install extended ROM's on G4 devices?
Yeahhh it's workinggg, great job, now i've wm6 in my g4 locked device, hehehe you're the best... thanks
@neonkoala
Thanx
speedfight said:
Does it also install extended ROM's on G4 devices?
Click to expand...
Click to collapse
No, now it can install only OS. I think i include this (extrom writing) feature in next release
2all
found some problem with old rom (try to unpack molski 2.26 rom). My tools can't extract it correctly. So be careful. Ill fixed this bug tommorow...now need to sleep..)
Great job! Think you've made many people very happy!
working fine over here now runing wm6 pdaviet4 and loving it
Still can't believe that!
Couldn't flash G4 CID-locked with "Faria 3.3 v2". The utility just doesn't flash it.
Flashing now with Orwell's WM6... let's see what we get
Yep! Worked that perfectly to me! No need to CID-unlock the Wizard
Great job mun_rus!
Well done! Works great! Just installed Orwell's 1984 flawlessly. Just have to search around to figure out the MMS and Camera bugs. Thanks!!!
i tried installing wm6 pdaviet4...but now it is stopped at the screen with ipl spl
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 10.1.0.011
no itsutils errors...nothing wrong while flashing...
EDIT: Now works. Entered in bootloader...flashed back old rom...e tried again.
Probably my error was a notification that poped up while flashing
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
Extracting OS...
Please wait...
Done!
********************
!!! Please make sure that: !!!
!!! You enabled the RAPI (setuped EnableRAPI.cab and rebooted)
!!! You connected your Wizard to the PC with USB ActiveSync connection
***Please, dont touch your device or PC while flashing***
***Because you may abort this operation!!! Dont do that!!!***
***You will get the message when your device will be flashed!!!***
********************
***Press OK to start***
********************
----!!!This process takes more tnan 15 minutes!!!----
[12:11:48.62] Write ROM 80040000-extension ro.nb Start
Do not disconnect the Wizard during the process
********************
[12:11:50.89] Write ROM 80040000-extension ro.nb End
********************
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
it does work... you saved me 30€
tnx mate
chriskaragiannis said:
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
....
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
Click to expand...
Click to collapse
try to use new version of my tool
mun_rus said:
try to use new version of my tool
Click to expand...
Click to collapse
I can't download
Upload it once more to xda
thabks
Thanks a lot Mun_rus for the tool! it work great
just upfrade to molski 's aku 3.rom
souvath
ps where can i download your aku 3.5
thank u
this program work perfectly and i think thats amazingly achievement and it made my day so happy!!!
Thanks!!!
Many thanks to mun_rus, the tool works perfect, upgraded ROM to Faria's AKU3.3.
This thread should be No1 in G4 !!!!!!!!!!!!!!!!!!!!
link is dead
hi guys ftp link is not working anymore.where can I download shelltools?thanks for help
It works well.
What I understand is this thing flash the system rom part while runing the OS instead of putting the device in a flash mode.
Btw, I was used to work with a virutal machine (emulated XP becaause of Vista) and I wasn't able to flash correctly.
Each time, it wouldn't go to the end of the process.
Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat
Hi,
I am trying to Update the ROM . I have copied the RUU_signed.nbh file to ROMUpdateUtility folder and starting my gene in Boot loader mode. When I run the ROM Update Utility , the utility is not showing the current Image version and after clicking on Update it shows the To Image version as 1.0.0.0.
Have I missed anything?
The version of SPL is 1.07.Oref
This is the problem in the ROMs and not in RUU
no need to worry
Hi,
You are right. I have downloaded another ROM. It worked fine. Can I install any contact manger and clock additionally to the exisiting programs?
rexhyd said:
Hi,
You are right. I have downloaded another ROM. It worked fine. Can I install any contact manger and clock additionally to the exisiting programs?
Click to expand...
Click to collapse
yes !! u can install
Which rom
Which rom u r trying to upgrade ????
I dont know the name of the rom. i have downloaded from here a couple of things.I was just trying to see how it works.Wud I be able to know what is the ROM I have on my Gene currently?Its with WM6.5.
Hi,
I have installed and checked almost all the WM 6.5 roms . For the Rom, the description says 15MB of free program memory after sometime. But for me, with any ROM after using for a while, shows program memory as 3-5MB only. Why is it so?
I want a ROM which has a memory advantage. Please suggest.
Now I have WM6.5.Can I flash with WM6.1 ROM now?
Regards,
yes u can flash 6.1 but don't flash any official rom.
there are a lot of rom with 6.5 working great why don't u try any of them.
hi,same problem here,can you teach me what i fix my problem?please....thanks
Obsolete
see http://forum.xda-developers.com/showthread.php?p=19893221#post19893221
id\ did it and my mobile now dont make any response to any kind of action i cant even open it boot it or any thing
noooooooooooooooooooooooo
did you have a stock rom or custom one before flashing ? how did you flash it?
thx in advance
i was using latest stock rom of my country (middle east)
but i used the spl flasher but changed the file with the link in this forum and then every thing went black i cant even press volume down to install a rom or boot any thing cant even charge my mobile
warning
pls dont installllllll my phone is completely brick dont installl people
i swear my phone is now completely brick down
Flash back hardspl or your backup
The old SPL file was corrupt, the first post is updated with a working new SPL.
How to flash this to my phone?
I tried via rom update utility but it can not read the file.
[edit]
obsolete message
Thanks.
This file works with rom update utility.
Great.
Did you find any difference with SPL 1.28 other than the charging animation?
so far no.
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
VirusPlus said:
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
Click to expand...
Click to collapse
Do you have 1.28 HardSPL or stock 1.28?
You should probably flash HardSPL first
I have 1.28 HardSPL, not stock one. I reflash HardSPL tho but still nothing
I'm searching for a way to fix this.
Will keep you posted
[edit]
obsolete message