Hi,
I am trying to Update the ROM . I have copied the RUU_signed.nbh file to ROMUpdateUtility folder and starting my gene in Boot loader mode. When I run the ROM Update Utility , the utility is not showing the current Image version and after clicking on Update it shows the To Image version as 1.0.0.0.
Have I missed anything?
The version of SPL is 1.07.Oref
This is the problem in the ROMs and not in RUU
no need to worry
Hi,
You are right. I have downloaded another ROM. It worked fine. Can I install any contact manger and clock additionally to the exisiting programs?
rexhyd said:
Hi,
You are right. I have downloaded another ROM. It worked fine. Can I install any contact manger and clock additionally to the exisiting programs?
Click to expand...
Click to collapse
yes !! u can install
Which rom
Which rom u r trying to upgrade ????
I dont know the name of the rom. i have downloaded from here a couple of things.I was just trying to see how it works.Wud I be able to know what is the ROM I have on my Gene currently?Its with WM6.5.
Hi,
I have installed and checked almost all the WM 6.5 roms . For the Rom, the description says 15MB of free program memory after sometime. But for me, with any ROM after using for a while, shows program memory as 3-5MB only. Why is it so?
I want a ROM which has a memory advantage. Please suggest.
Now I have WM6.5.Can I flash with WM6.1 ROM now?
Regards,
yes u can flash 6.1 but don't flash any official rom.
there are a lot of rom with 6.5 working great why don't u try any of them.
hi,same problem here,can you teach me what i fix my problem?please....thanks
Related
!!!BE SURE THAT YOU DO SOMETHING AT YOUR OWN RISK!!!
!!!FOLLOW MY INSTRUCTION FOR STEP BY STEP!!!
I want to say that Im not a real programmer, I found some way to flash CID LOCKED device and wrote only shell (with userfrendly interface) and collected some useful tools.
Special thanx to itsme for his tools (if i dont mistake...)
WARNING!!! IF YOU WILL SEE CMD WINDOW DON’T CLOSE IT!!!
WARNING!!! DON’T TOUCH YOUR PC OR DEVICE WHILE FLASHING!!!
With this tool and my instruction you could:
1) Get info about ROM
2) Extract only OS from whole nk.nbf
3) Flash this OS to your G3/G4 CID LOCKED Device (even wm6 rom or latest aku 3.3 rom).
In atachment there are:
1) ShellTool.doc - instruction. Read first and please, follow it step by step!!!
2) ShellTool.exe with some other files that it need
3) Cert_SPCS.cab/EnableRapi.cab - should be installed on your device
I tryed to flash diffrent rom to g4 CID LOCKED DEVICE and its were flashed on it and worked perfect. Have fun
_________________________________________________________________________________
If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom. ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!
_________________________________________________________________________________
ChangeLog:
1) Several bugs were fixed. Now you can flash OS from every rom you want
http://rapidshare.com/files/53678765/ShellTool_bugfixed.rar.html
Uploaded it to XDA developers:
ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/img-27361-ShellTool.rar
Great job! gonna test it soon.. Does it also install extended ROM's on G4 devices?
Yeahhh it's workinggg, great job, now i've wm6 in my g4 locked device, hehehe you're the best... thanks
@neonkoala
Thanx
speedfight said:
Does it also install extended ROM's on G4 devices?
Click to expand...
Click to collapse
No, now it can install only OS. I think i include this (extrom writing) feature in next release
2all
found some problem with old rom (try to unpack molski 2.26 rom). My tools can't extract it correctly. So be careful. Ill fixed this bug tommorow...now need to sleep..)
Great job! Think you've made many people very happy!
working fine over here now runing wm6 pdaviet4 and loving it
Still can't believe that!
Couldn't flash G4 CID-locked with "Faria 3.3 v2". The utility just doesn't flash it.
Flashing now with Orwell's WM6... let's see what we get
Yep! Worked that perfectly to me! No need to CID-unlock the Wizard
Great job mun_rus!
Well done! Works great! Just installed Orwell's 1984 flawlessly. Just have to search around to figure out the MMS and Camera bugs. Thanks!!!
i tried installing wm6 pdaviet4...but now it is stopped at the screen with ipl spl
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 10.1.0.011
no itsutils errors...nothing wrong while flashing...
EDIT: Now works. Entered in bootloader...flashed back old rom...e tried again.
Probably my error was a notification that poped up while flashing
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
Extracting OS...
Please wait...
Done!
********************
!!! Please make sure that: !!!
!!! You enabled the RAPI (setuped EnableRAPI.cab and rebooted)
!!! You connected your Wizard to the PC with USB ActiveSync connection
***Please, dont touch your device or PC while flashing***
***Because you may abort this operation!!! Dont do that!!!***
***You will get the message when your device will be flashed!!!***
********************
***Press OK to start***
********************
----!!!This process takes more tnan 15 minutes!!!----
[12:11:48.62] Write ROM 80040000-extension ro.nb Start
Do not disconnect the Wizard during the process
********************
[12:11:50.89] Write ROM 80040000-extension ro.nb End
********************
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
it does work... you saved me 30€
tnx mate
chriskaragiannis said:
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
....
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
Click to expand...
Click to collapse
try to use new version of my tool
mun_rus said:
try to use new version of my tool
Click to expand...
Click to collapse
I can't download
Upload it once more to xda
thabks
Thanks a lot Mun_rus for the tool! it work great
just upfrade to molski 's aku 3.rom
souvath
ps where can i download your aku 3.5
thank u
this program work perfectly and i think thats amazingly achievement and it made my day so happy!!!
Thanks!!!
Many thanks to mun_rus, the tool works perfect, upgraded ROM to Faria's AKU3.3.
This thread should be No1 in G4 !!!!!!!!!!!!!!!!!!!!
link is dead
hi guys ftp link is not working anymore.where can I download shelltools?thanks for help
It works well.
What I understand is this thing flash the system rom part while runing the OS instead of putting the device in a flash mode.
Btw, I was used to work with a virutal machine (emulated XP becaause of Vista) and I wasn't able to flash correctly.
Each time, it wouldn't go to the end of the process.
Hi guys, hope you can help me.
I have a Hd2 and have flashed it with sspl and a custum rom etc. i managed this as the post in question gave a link to the flashing program, but the new version does not provide a link, so questions:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
2) is the flashing program for a radio the same as the one for a rom? can i use a flasher program to flash a radio and the same one to flash a rom?
3) is the flasher for other HTC devices the same as the one for the HD2? i have an image file from a older HTC device, could i replace the nbh file in that with the one i want to flash and it works?
P.s. the rom i use is atemidis and i am interested in dutty`s new rom as the new artemdis has problems with things missing.
dutchtrance said:
Hi guys, hope you can help me.
I have a Hd2 and have flashed it with sspl and a custum rom etc. i managed this as the post in question gave a link to the flashing program, but the new version does not provide a link, so questions:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
Click to expand...
Click to collapse
not sure, they may be, but why risk it since all(most)roms come with a customruu.exe anyway
2) is the flashing program for a radio the same as the one for a rom? can i use a flasher program to flash a radio and the same one to flash a rom?
Click to expand...
Click to collapse
yes, however you said you used sspl, , , sspl wont work for radios.
3) is the flasher for other HTC devices the same as the one for the HD2? i have an image file from a older HTC device, could i replace the nbh file in that with the one i want to flash and it works?
Click to expand...
Click to collapse
the nbh file is the actual ROM, if you flash a rom from a different phone, , well, just dont.
P.s. the rom i use is atemidis and i am interested in dutty`s new rom as the new artemdis has problems with things missing.
Click to expand...
Click to collapse
dutchtrance said:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
Click to expand...
Click to collapse
As far as I know they are, as in you should be able to use any of them to flash any ROM onto the HD2 (I've done this plenty of times, though alot of times I will use the one that comes with the ROM). Note that not all of them are the same as some will perform task29 before flashing the ROM or another trick.
Thanks for the help thus far.
You've confirmed what i thought.
I installed the new spl-2.08.HSPL, then installed the recomended radio.
I`ve then flashed the athedies v28 gen 2 but it wont boot into windows, it just hangs at the red/orange screen with the big windows logo where it says its setting up the today screen.
I gather that i can flash a new image as i have the hspl, but how do i go about doing this as i cannot get an activ sync connection in windows to launch the flasher.
I assume i can hold down the down key to get into the HSPL menu and then flash from there some how? does this mean i have to do a flash from the memory card?
I have managed to flash by holding down the down key and getting into the 3 colours screen and then i can flash from there, but the thing still hangs at the red/orange screen. think its the rom
Hi guys I have a HD2 (obviously says you's) that is locked to only installing Vodafone roms. Im stuck on rom 1.72 as Vodafone havent released any newer ones nor are they intending too!
I wanted to install hspl and install the newest htc stock rom. 3.03?
But I am aware that there is no hspl available that will allow you to do this.
So my question is, what is the newest Rom I can install that HSPL can do and where would I get it?
Thank you for your help
Mark
You can only install a stock Rom from your device.
This means if you have a branded device; you can only install stock rom this branded device.
BUT;
You have two solutions:
- Using a custom rom.
- Using the GoldCard solution/technique. in this case you can install stock rom 3.14
i'd suggest going for a custom ROM...the possibilities are endless, check out the ROM Dev. forum and pick the one that suits u best.
Hi thanks for your help. I'm trying the goldcard version now but need a little help please. When it says
1. Download your 3.14 Stock ROM from HTC, Links you will find here:XDA 623283
2. Extract your Stock ROM (RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.1 5 .50.14_LEO_S_Ship.exe)
3. Copy RUU_signed.nbh to your Goldcard and rename it to LEOIMG.nbh
(Use the “Explore” Feature of ActiveSync / MobileDeviceCenter)
What escatly does it mean? I have downloaded the rom which has a the name
"_HTCHD2_RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
What do I do to this now to extract it? When I double click on it it just opens the programme. Could someone help me please.
Thank you
Its ok I worked out how to extract the file thanks. Hopefully it works now
Its still not working.
When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions
Just a morning Bump
You most probably must Format your SD Card,but from my bitter experiance I would consider the steps very carefully before flashing from an SD Card,I was lucky to bring my HD2 back to life after a day of bicking it.
I myself installed the HSPL tried out many custom ROMS but so far couldnt find one without a bug,one thing I noticed common with all of them:my WIFI suffered badly that was my main reason to go back to the stock ROM,which has good WIFI reception now as my laptop!!.
Even the new Stock 3.14 reception was not up to my current one.
This is just my experiance.
I have a weird problem.Since i flashed new official ROM 3.14 yesterday my phone reports that its RAM is full(Duttys Task Manager reports 80% usage all the time).
Before,on my old ROM 1.66....Duttys TM reported 50% usage in worst cases and while playing games.
I don know what is the problem.I cant even surf because phone doesnt have enough RAM to run Opera!
Before installing new ROM i did Task 29.The phone reports that it has 576mb of RAM.
I did a Hard reset but no luck.
Help me please.
as mentioned, ,, everywhere, , , if you dont have spl 3.03 (i.e if you have hspl installed) with 3.14 rom then your ram goes missing.
Hmm..I didnt know that.
Thanks!
So,where do i get and how do i install spl3.03?
neurokrem said:
Hmm..I didnt know that.
Thanks!
So,where do i get and how do i install spl3.03?
Click to expand...
Click to collapse
1) Tearn back on your previous stock ROM.
2) use HSPL2_RUN.exe to install SPL 1.66
3) Install stock ROM 3.14 over ActiveSync.
4) use SSPL to install custom ROM.
you shouldnt need to flash your old rom first, just run hspl.exe and remove hspl (choose 1.66.0000), then run the 3.14 flash again.
Im quite new to all this.
Just to make it clear:I download HSPL2_RUN.exe and i install it and during installation i choose to install 1.66.0000.
Didnt i installed HSPL2_RUN.exe to have hspl 2.08 in the first place?
neurokrem said:
Im quite new to all this.
Just to make it clear:I download HSPL2_RUN.exe and i install it and during installation i choose to install 1.66.0000.
Didnt i installed HSPL2_RUN.exe to have hspl 2.08 in the first place?
Click to expand...
Click to collapse
If you have choose to install SPL 1.66.0000 than it's okay.
Yes with HSPL2_RUN you can install SPL also install HSPL
Now you need only to install stock ROM 3.14 again.
Ok,i just have two more questions:
Can i use Android on my phone given the fact that now i have SPL3.03 and ROM 3.14?
Is there any way to install some other HSPL that dont cause memory conflicts with ROM 3.14?
neurokrem said:
Ok,i just have two more questions:
Can i use Android on my phone given the fact that now i have SPL3.03 and ROM 3.14?
Click to expand...
Click to collapse
yes
Is there any way to install some other HSPL that dont cause memory conflicts with ROM 3.14?
Click to expand...
Click to collapse
no. Use sspl if you want to flash other roms.
I am running HSPL 2.08 and rom 3.14 and I have full ram and everything I can even make a youtube video and show you if you want me 2
Thanks guys.You have helped me a lot!
@samsamuel, Ok,just to be sure:Its ok for me to start Android from my SD card even if i use spl3.03?Wont that brick my phone?
@rascall97, please show me what you did.I had memory problem with HSPL2.08
no idea, i dont run android, but it should be fine.
@rascall,
settings - about phone - hardware info - RAM size says 576 meg for you right?
go to settings - menu - all settings - system - memory
what are th three figures under "program memory"? something like 200 total and 60 free would be my guess.
memory specs
total program 458.74
used program 172.95
free program 285.79
then you're on the tmous rom? (or a cooked rom, that doesn;t use a full 3.14 base?)
EDIT - oh wait, dallas, t mobile symbol, , you have a tmous phone, with 576 ram.
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..