Related
hello all. i have an s200 G4, and it was in german. i tried to cid unlock it (succesufull), then tried to install a wm6.1. Didn't worked, after it was finished all i can see is the bootloader mode (i've removed the battery, put it back and turn on). I tried to get back to wm5, succesufully, and i tried to install a lot's of wm6.1, all are doing the same: bootloader mode instead OS system. what can i do?
Hi !
What did you do to CID-unlock the device ? Are you sure it was successfull ?
I've got a G4 S200 (French SPV M600) myself and I understand the CID unlocking cannot be performed on G4 devices, only G3 (see wiki here).
Did you use any hardspl or something of the sort ?
Regards,
David
yes i've tried. i will tell you tonight if will work with softspl, 'cause i didn't try that.
Ok...
Actually, "HardSPL or SoftSPL" doesn't really mean "CID-unlocking"... It rather enables you to flash ROMs without having to CID-unlock...
But HardSPL doesn't enable you to dump the original shipped ROM for example.
ok. i've made again now hard spl, and. i cannot install another rom instead wm5. what should i do?
so: i have installed Prophet_Orange_UK_ROM and was succesufully, and after that i've run on pda jumpspl and was finished. and after that i've tried several times (each time from beginning) to install many wm6.1 roms, but without success. each time appear bootloader mode after is finished the upgrade process. i've tried also with hardspl too. what can i do something else?
Is your PC using Vista by a chance??
nop. win xp.
What is the devices SPL before and after HardSPL?
It should change. If it does not, then HardSPL was not successful!
The device will not boot to the OS without Hard/Soft SPL being completed.
You can use a tool such as Dioxda2s "lazy tool" to automate the SoftSPL/ROM flash process.
the SPL was changed after hard-spl, i know the procedure. but, after hard-spl, I tried to install wm 6.1 (any version) and was succesfully, but, after it was finished, when to enter in OS, it doesn't. Is remaining in bootloader. but i didn't tried with that tool. I will, thank you very much.
I have the same problem , identicaly .
ady_uaic said:
the SPL was changed after hard-spl, i know the procedure. but, after hard-spl, I tried to install wm 6.1 (any version) and was succesfully, but, after it was finished, when to enter in OS, it doesn't. Is remaining in bootloader. but i didn't tried with that tool. I will, thank you very much.
Click to expand...
Click to collapse
What is your devices IPL/SPL?
it's G4, ....01
ady_uaic said:
it's G4, ....01
Click to expand...
Click to collapse
After having successfully HardSPLed your device, your SPL should be
2.G4.4PDA and not 2.20.0001...
ady_uaic said:
it's G4, ....01
Click to expand...
Click to collapse
IF SO... SAME AS MY G3 (NEVER GOT THE HARDSPL DONE CORRECTLY)
... MAY BE TRY THE LAZY_TOOL UPGRADE... ( LIKE WHAT i DO.... ALWAYS )
ok. thank you
Yeah its happening the same for me aswell. 6.1 gets stuck in bootloader no matter what
gunblade45 said:
Yeah its happening the same for me aswell. 6.1 gets stuck in bootloader no matter what
Click to expand...
Click to collapse
Gratulation you are the winner from nonreading treads. Do you have HardSPL for flashing WM6 Roms ?
Thankyou Thankyou !
The direct wm5 to 6.1 tool worked for me after I downgraded from wm6 to 5. Let it do everything ,no hard spl n crap
Hello,
where to find that direct download.
Your help appreciated
Hi everyone, I need help please. I am trying to flash a WM 6.5 ROM to my NIKI 100 (20 keys) but I cant seem to find a HardSPL that will work on my phone I always end up getting "ERROR[262]" I followed the steps to flash sspl-1.16-NIKE.exe on my phone in order to flash a HardSPL but still the same problem.
I have Official 2.09.405.1 ROM, Radio - 1.65.28.25. If I go into bootloader mode it shows: NIKI 100
SPL-1.22.0000
CPLD-4.
Is there anyone that can tell me wich HardSPL I need?? So far I"ve tried -
flash-HardSPL-Niki, HardSPL-1.15mfg-Nike, HardSPL-1.16.Nike, HardSPL-1.22-Nike-shipped and Flash-uspl-Niki.
Thanks
I hope this help
1. installed the SSPL installatoin, v1.16 (look at this thread http://forum.xda-developers.com/showthread.php?t=355730 for the installation)
you can skip step 7 and above.
2. Still in Bootloader screen, you can install HardSPL 1.22 using the installation files.
Dont worry about the step that device must connected to activesync just check the status and do next to update ROM. As long as your device is in bootloader mode (rainbow color) the update process can continue even you are not connected to activesync
3. Good luck
Has this been solved?
Heya Cyanide..
Has this problem been solved? If not, I reckon you should check this out: http://forum.xda-developers.com/showthread.php?t=377260
I have both the 16 keys and 20 keys versions of the HTC Touch Dual. And the confusing thing is, the 20 key version is not a Nike. It is actually a Neon 200 (or at least mine is). How do you tell?
Remove the back cover of the phone, and remove your battery... The label will reveal whether it is in fact a Nike or a Neon. If it's a Neon, then that explains why your attempts to Hard-SPL haven't worked to date.
Anyways, hit up that link above, and you should be able to Hard-SPL easily. If you need directions, let me know, but it should be fine... let us know how you go
HK 20key version is NIKI100
Hi dr3wster
Just FYI. In HK 20 keys version of the Touch DUAL says NIKI100 inside the battery compartment.
to be honest I'm confused over NIKI, NIKE, NEON now, but will keep reading.
dr3wster said:
Heya Cyanide..
Has this problem been solved? If not, I reckon you should check this out: http://forum.xda-developers.com/showthread.php?t=377260
I have both the 16 keys and 20 keys versions of the HTC Touch Dual. And the confusing thing is, the 20 key version is not a Nike. It is actually a Neon 200 (or at least mine is). How do you tell?
Remove the back cover of the phone, and remove your battery... The label will reveal whether it is in fact a Nike or a Neon. If it's a Neon, then that explains why your attempts to Hard-SPL haven't worked to date.
Anyways, hit up that link above, and you should be able to Hard-SPL easily. If you need directions, let me know, but it should be fine... let us know how you go
Click to expand...
Click to collapse
With wich OS you PC (not your HTC) is working?
The error message sounds to me like you are working with VISTA.
If so, try to do these steps on a XP system, and it should work.
Hi,
I made sure...underneath the battery it says NIKI 100.
I tried alot of hard spl's and nothing works.
MvSt said:
With wich OS you PC (not your HTC) is working?
The error message sounds to me like you are working with VISTA.
If so, try to do these steps on a XP system, and it should work.
Click to expand...
Click to collapse
I am working with XP and not Vista
me too have same problem with niki100
i have also same probelm under battrey writen niki100 i tried alot of things here
but not working .
i need a help to flash my niki100 to english
thanks
clickes2000 said:
i have also same probelm under battrey writen niki100 i tried alot of things here
but not working .
i need a help to flash my niki100 to english
thanks
Click to expand...
Click to collapse
Try it this way.
Greetz,
Simply stuck and wandering...
Hi there
I am a noob in this area. I am reading the forum for the last days and trying to upgrade my i-mate jamin G3 but i always get stuck...
I started this thread as it involves more than one thread I read, namely
- Windows Mobile 6 Directory For Dummies
- New WM6 Upgrade Guide
- HardSPL guide and files
- Prophet Tools Light: Just the flash! & Prophet Tools: Simplify Flashing--V2.8.3 now up!
- Current upgrade guide for the most ROMs
- LAZYTOOL For all nk.nbf FLASHING + 3 color bootup SOLUTION + (PLEASE READ.........)
- WM 6.5 build 21501 Titanium [ Fixed ] & Fixed CommManager, and other ROMs I tryed...
- ...
so here it goes:
#1# I tryed to run HardSPL an I got an error message like this:
'One or more CON code pages invalid for your given keyboard'
so i guess i didn't work...
#2# then I tryed with ProphetTools and after doing the HardSPL it asks (in jamin) to run JumpSPL I click on yes and then I get white screen (in jamin) I click the flash rom and then I get either:
- error 260 or 274 - connection - this sometimes is worked around and got to 208
or/then
- error 208 - file open (and I did put the nk.nbf rom file in ...\Tools (as said on PTL) and also tryed in ...\Utils\Flash)
#3# While in white screen (achieved with PTL) I also tryed ROM 21501 (with its own RUU) and I get 3 colour screen after supposedly successful upgrade...
#4# also tryed lazyTool but got the same 3 colour screen
#5# With the no vendor NVID_RUU (got from lazy tool thread) I got it back to WM5 and working, pitfully i forgot to dump my original rom so now i am stuck in WM5 in English (i at least had it in Portuguese - my native L)...
I found this comment from dioxda2 in another thread...
Quote:
dioxda2 said:
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and
Click to expand...
Click to collapse
... actually my prophet (jamin) works fine after I flashed the NVID, the problem is that I can't put it to work with any other ROM...
So any of senior experts plz advice
hopefully i am missing some supidly simple solution
#6# Meanwhile if someone knows were do download a original PTG ROM for prophet I would appreciate.
MYG
Jamin G3 unlocked
IPL 2.13
SPL 2.20
NVID
Last edited by MYGene; Today at 06:20 PM.. Reason: confused with dioxda2 comment...
my prophet is G4 so slightly different i would ask you to post detail for the second boot screen
here is mine
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.19.21
wapvirus said:
my prophet is G4 so slightly different i would ask you to post detail for the second boot screen
Click to expand...
Click to collapse
My SPL only shows:
IPL 2.13
SPL 2.20
im a total noob here too but i never encountered the same prob as you have.. i see SPL 2.20 right... so if you want to flash a ROM from here its required that you do HardSPL. i have a G3 device too. you might want to try this... i will try to help as much as i can...
make sure your USB cable/cradle is working perfectly and try to attached it at the back of your PC CPU...
and btw are you using XP or VISTA? coz i use XP...
just RUN HardSPL and let it do its thing... when its done check your SPL again..
marekPLPH said:
im a total noob here too but i never encountered the same prob as you have.. i see SPL 2.20 right... so if you want to flash a ROM from here its required that you do HardSPL. i have a G3 device too. you might want to try this... i will try to help as much as i can...
make sure your USB cable/cradle is working perfectly and try to attached it at the back of your PC CPU...
and btw are you using XP or VISTA? coz i use XP...
just RUN HardSPL and let it do its thing... when its done check your SPL again..
Click to expand...
Click to collapse
I just got another USB cable borrowed and tried the HardSPL you uploaded and it Worked
Actually It gave me the same error message about 'One or more CON code pages invalid for your given keyboard' but this time I didn't got the 3colour screen at the end, instead it restarted normally with SPL 2.G3
I am just waiting battery charge reaches 50% to try flashing it
Many thanks
(I assume either i got a corrupted HardSPL file either a bad USB cable...)
MYGene said:
I just got another USB cable borrowed and tried the HardSPL you uploaded and it Worked
Actually It gave me the same error message about 'One or more CON code pages invalid for your given keyboard' but this time I didn't got the 3colour screen at the end, instead it restarted normally with SPL 2.G3
I am just waiting battery charge reaches 50% to try flashing it
Many thanks
(I assume either i got a corrupted HardSPL file either a bad USB cable...)
Click to expand...
Click to collapse
Good to hear this...
Happy Flashing!!!
MYGene said:
I just got another USB cable borrowed and tried the HardSPL you uploaded and it Worked
Actually It gave me the same error message about 'One or more CON code pages invalid for your given keyboard' but this time I didn't got the 3colour screen at the end, instead it restarted normally with SPL 2.G3
I am just waiting battery charge reaches 50% to try flashing it
Many thanks
(I assume either i got a corrupted HardSPL file either a bad USB cable...)
Click to expand...
Click to collapse
That,s great news and happy flashing
Hello
after upgrading i'm stucked in spalsh screen (the one with rom version and others...). can i skip this step? the device is lost?
do you have others questions?
Cheers
no one?
Hi.. did I broke the device?
Cheers
Hi!
Give us more info about your device.
IPL,SPL,installed ROM,etc
Did you try hard reset?
BR
Szig
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Stuck in splashscreen
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
punker1993 said:
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
Click to expand...
Click to collapse
ChrBeck said:
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Click to expand...
Click to collapse
Hi!
As you can see mostly it is hopeless.Rarely rehotting DOC chip can help and I read somewhere that sometimes flashing helped,but that was a desperated try with Prophet ROM or something like that.If I was you I could try to flash it with Goldcard (just from curiousity and nothing to lose),but if ChrBeck can't help then who?
BR
Scootie
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
ChrBeck said:
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
Click to expand...
Click to collapse
Hi!
Thanks for the answer.
Just a few things:
I'm in searching for an AKU1 ROM.I had it on my computer years ago,but it lost when my HDD damaged.If I find it,I will upload it for you.
The heating up:in this case probably it doesn't help.When we have a device that can't be flashed properly,we try this and it helps more often than you think.Not only with PDAs,but with phones too.
Goldcard SH¤T:
I know what is Goldcard about.
The reason I mentioned it,it helped me 3-4 times when the device (not only Charmer,other devices too) stuck on bootloader or splash screen after flashing.I didn't have too much time in the workshop,so I tried this and worked.
I don't want to argue with you,I know you are an expert in this,I just tried to help with my experiencies.
BR
Scootie
P.S.:I found it on the xda-developers ftp server: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship.rar
ftp://xda:[email protected]_1120223_11202110_11220_T-MobileUK_Ship.rar
OK nice that you found the ROM. Maybe we'll have a new test package for the fix of format failed error soon then.
And yes you are right sometimes Goldcard helps if you have forgotten to flash HardSPL or it is damaged then it may help but you need to have acces to OEMSPL and we don't have it.
So hope I can do something soon.
Hi!
I have a question:
I have a Charmer with IPL,SPL 3.08.Unfortunately it is CID locked,so I can flash it with official v3 ROMs only.Is there any solution to downgrade it?Or with JTAG only?
Thanks in advance!
BR
Scootie
The NoID RUU will be able to downgrade it.
Hi!
I tried that,but:
1.flashing is successful,but nothing has changed,I get the old OS after upgrade
2.I tried the v1 ROM I found.The IPL has been changed to 1.12,but the SPL remained 3.08.The OS has been changed in this case,so it worked flawlessly.
The CID unlocking methods didn't work (obvious,SPL was 3.08).
After that I tried to upgrade it,but it was a torture.I got errors and errors,but after an hour finally I could upgrade it successfully.
So,if you have an idea,I have a device to test it.
BR
Scootie
The IPL is down means it worked. After that you can flash a Prophet ROM.
What ROM of Prophet?
High, I was today flashing my Charmer with all original ROM I mean and the flashing process behaves OK, after flashing, it writes "Congratulation" and all the things like OS, Radio, IPL... are change to the definite ROM. But it's all. It will stuck in the splash screen... I have read in this thread something about Prophet ROM. What is it?
The prohpet ROM is an official Prophet AKU 2 flashable after downgrade.
System is as follows:
Fist flash the Charmer AKU1
Then flash a Prophet AKU2
Then flash Charmer Aku3.
You need to do all these steps with the NOID RUU.
That should fix the HardReset failing.
I'm working to get a tool running that does the whole thing automatically.
THX
Oh ****, Thanx 4 quickly answer...And I'm waiting :-D
Ok, so now I'm having
IPL 1.12
SPL 1.12.0000
GSM 01.12.20
OS 1.12.2.23
And I'm waiting 4 your instructions...
How have you gotten the SPL down?
Normally, with flashing... It can be flashed with every ROM...
OK. Cause normally SPL stays up. I never saw a full downgrade.
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Sim0cYz said:
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Click to expand...
Click to collapse
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Hakim Rahman said:
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Click to expand...
Click to collapse
hey thanks! I'm trying this way. will let you know
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Sim0cYz said:
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Click to expand...
Click to collapse
You should first understand the instructions and tried to install WMDC for Windows Vista 64bit on your own computer! WMDC can you get on http://www.microsoft.com/download/en/details.aspx?id=3182
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Sim0cYz said:
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Click to expand...
Click to collapse
Ok, seems to work on WinXP @ VBox, but now I got stuck at two first lines
=== Niki SuperCID and Security Unlocker (c)2008) by jockyw2001
=== Donations happily accepted, paypal to [email protected]
but the tool won't continue doing his job..
I have the same problem: I have followed all the steps (Security Unlock, ROM isntallations, RADIO installations) but still no service (and with a Nokia I have full signal).
Ok, the problem was that I had installed HardSPL 1.22 instead of 1.15.
I flashed an official ROM, flashed HardSPL 1.15, flashed the suggested radio (1.58.21.23).
After that I ran the SuperCID, on my VirtualBox Windows XP based, disabled usb connection in ActiveSync, then it worked in a second. Nice! At the boot now I get "Security Unlocked".
Now I flashed the radio "RUU Nike Radio 1.58.21.23S Modded"
Going to insert my sim and check out
Ok, the Connection Setup installed the vodafone IT config, trying to reboot now..
Always the same.No Service.
If I try to press "Find Network", it takes very very long, after that I get "No Service"..
if I choose Network Selection "Manual", it can't retrieve the list of networks, says:
Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again.
Same if I try "Set Networks".
What can I do?
Tried another Radio,
1.58.21.23S Modded
1.64.08.21K
1.71.09.01K
Are not working for me.
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Thx @Rataplan, indeed I have HD2. This is my wife's phone (she replaced her BB with this one). I tried also an original ROM, but doesn't work. The thing is that in my house I don't have signal, but outside is ok; so this means that the antenna is a little bit weaker than others.
Rataplan said:
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Click to expand...
Click to collapse
OK, i'm trying the ITA rom (i'm from italy). Will let you know for sure.
tried. it's not working..
Sim0cYz said:
tried. it's not working..
Click to expand...
Click to collapse
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Rataplan said:
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Click to expand...
Click to collapse
Thanks for your help, do you know how could i fix it?
Sim0cYz said:
Thanks for your help, do you know how could i fix it?
Click to expand...
Click to collapse
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Rataplan said:
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Click to expand...
Click to collapse
hey thanks, u're a PRO! let me see!