HELP!
My boss just bought a new XV6800 Verizon Titan. He wants to do what I have (flash with DCD, etc..). This is th situation - I cannot get Olipro 2.40 to connect to his device - I have placed it into bootloader mode and at present he has it set up with wireless sync - verizon server, etc...
This is the problem - I cannot get an activesync connection with either a vista or xp machine because he has set it so it will not duplicate his contacts/etc - so activesync is disabled.
HOW can I get olipro 2.40 to allow the flashing process (recognize and connect) to the device? I am going nuts!!
Thanks in advance...
http://www.lifesnotsogood.com/dcd1182/titan/spl/
I have olipro already - just need help connecting it... Thanks though N715DP
N715DP said:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
Click to expand...
Click to collapse
I think what he's saying is he has Olipro 2.4 but his boss has configured his device to not connect to Activesync via a USB cable and he has to do that for the bootloader flash. Couldn't your boss do a PIM backup...hard reset the phone which would erase the activesync settings on the device...then connect to your XP machine and let it connect to activesync via USB and unlock??
my bad, didn't read it clearly
Or tell your boss to do it himself....
On XP, can't you set activesync not to synchronize anything (which would take care of the issue of duplicates) but still connect to the device? That's how I have it set up. If so, you can disable the synchronization, flash it, and then re-enable synchronization with activesync. Just a thought.
If I do that - do a hard reset, do I put it into bootloader mode or boot into WM to flash olipro?
kashabrown said:
If I do that - do a hard reset, do I put it into bootloader mode or boot into WM to flash olipro?
Click to expand...
Click to collapse
Let it go into WM...then connect as usual...activesync should start and and save settings...then you should be able to flash as usual.
Thanks!!!
Thanks guys - had to stay a little late at work, but I got it to work GREAT - I appreciate all you that helped!!
Related
Ok...I have been through all the posts about upgrading etc. I still have a problem and I'm sure that I'm overlooking something....but I can't figure it out on my own. Here is what is happening (it does the same thing with every RUU that I've used...the DST fix...upgrading to WM6....etc)
1. I run the RUU and let it go through its routine (extract files, verify info on pc, etc.)
2. I check the box that says I have read the readme and click next
3. The next screen appears and it has the following steps:
Connect to the USB cable (check)
Establish an ActiveSync Connection (check)
Disable standby and hibernation on PC (check)
Make sure batter is > 50% (check)
Then I check the box and click next
4. I pick the update and click on the update button
5. I verify that I want to upgrade my phone from ROM verion x.xx.xxx to x.xx.xxx and click next
6. The program tells me that I am finally ready to update...and if I am sure I want to proceed to click next...so I click next
7. As soon as I click next...the progress bar comes up on my pc and my phone goes into standby mode (no bootloader...just standby). The progress bar never moves.
8. After a minute or two the RUU give me the ERROR [260]: Connection
9. I reboot my device and repeat steps 1-8
10. I reboot my device and my computer and repeat steps 1 - 8.
Now if I leave my device connected to the usb and close out the RUU after it gives me the ERROR [260], and then run the RUU again...when it is first verifying the information on my pc (before it asks any questions and before it tells me to connect my device) it will throw the device into bootloader mode. If I try to keep running the RUU while the device is in bootloader mode it give me the error that my device is not connected. I have tried and tried...maybe one of ya'll can help me. Thanks in advance
Chris
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
gerald_s said:
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
Click to expand...
Click to collapse
XP
No firewall
I tried to flash the WM6 from AT&T I assume its beta
and no did not install the Olipros bootloader
Ok...I think I found out how to do this...Ya'll can tell me if I'm screwing something up.
I go through all the steps listed above until it gets to the progress screen. When it gets there I manually put the the device in bootloader mode (Power, side ok, and reset). Once I do this...the progress bar starts moving. I will let you know if this works...
Hmmmm
Its not the way it should work but if it works its ok
You should have installed Olipros HardSPL first and then try to flash an official rom. If its working then something with your download is wrong.
What ROM is on there now?
Has the phone been CID unlocked?
Oli's CustomRUU is better, you may want to unpack the ROM and put the NBH in a folder with Oli's RUU and then do the upgrade.
BTW, gerald_s is right, you should not have to do that... what you may want to do is put the phone in Bootloader mode manually (while not connected to the PC), then plug in the USB, then start the RUU. That helps some people with 260 error.
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
You may be trying to flash a rom that includes the radio rom. What is your device? Is it possible that your device is a new x01ht with radio 1.14 and radio bootloader 0182? If yes, then you will get this error when you try to flash a rom with this method because during the flash it will be disconnected by the radio bootloader because it is not overwriteable. If you flash using the NBH file on the microSD, it will skip past radio and radio boot and just flash the other parts of the file.
mikebraeuer said:
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
Click to expand...
Click to collapse
If you are running windows XP, just connect the card to the computer, open MY COMPUTER, right-click the removable disk that is your microSD and then click format. Default in windows xp is to format using FAT32 filesystem which is perfect.
The thing is... if you dont know how to format a drive in Windows, should you be flashing your device yourself?
Which Solution???
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Wantoknow said:
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Click to expand...
Click to collapse
Have you tried flashing with your microSD?
Kevbodian said:
Have you tried flashing with your microSD?
Click to expand...
Click to collapse
I forgot to tell that, I had flashed through extra memory card yet, and could be done!
But I wanna flash ROM against CustomRUU through MS Active Sync as I had used before. Can you help me
i have a problem very similar to Chris. when i check the box "yes activesync is syncronised", and then the progressbar shows up and the phone goes into standby.
i've turned standby of in powermanagement options.
my os is XP
i use active sync v4.5
and this is first time i try this.
i've read something about this bootloader, i can get there but then i cannot sync with active sync. so i kinda stuck.
have been searching the forums and this was the same problem as mine but i don't understand your solutions.
//KufrA
--Problem solved--
i did all things without activesync,
1. start phone in bootloader
2. do the install
3. wait 0% to 100%, and done.
is there a problem with active sync or why do i have to do anything with it at all?
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
hey friends help me
I have dopod 818pro with wm5 ipl and spl 2.20
I cannot connect activesync my os is xp
bootloader mode is work fine
need to up grade wm6
thank you
loney_frsu said:
hey friends help me
I have dopod 818pro with wm5 ipl and spl 2.20
I cannot connect activesync my os is xp
bootloader mode is work fine
need to up grade wm6
thank you
Click to expand...
Click to collapse
What had happened to you?
more details please ~~~~~ OR
Read my Post 1 in my signature~~~~
Good luck~~~
Did you try to reinstall AS? It souns like a missing driver.
dioxda2 said:
What had happened to you?
more details please ~~~~~ OR
Read my Post 1 in my signature~~~~
Good luck~~~
Click to expand...
Click to collapse
I can install wm6 shadow successfully
when it restart again goto bootloader screen
Seems like firewall problem to me, as in the start same problem happen to me. I guess ROM has nothing to do at least with the ActiveSyc. or 2nd option could be the driver problem . btw check when you try to connect with the pc, the application activesync is running on you device or not.
loney_frsu said:
I can install wm6 shadow successfully
when it restart again goto bootloader screen
Click to expand...
Click to collapse
did you complete the hardspl flashing?
dioxda2 said:
did you complete the hardspl flashing?
Click to expand...
Click to collapse
I have disable firewall and anti virus program on my lap.but I can't
I can't connect active sync to flash hard spl I have try out ur guide,
my friends xda2 mini is connecting very nicely
it may be hardware problem?
very thank u
Can you enter bootloader (disable connect though USB in activesync) and flash a ROM after plugging the device in?
Have you tried a different USB port?
Does the orange (charging indicator) go on when the device is plugged into the computer?
Does ActiveSync report an error?
So I'm a total n00b at unlocking phones but I was trying to unlock my alltel 6800 and after running the program and following the steps I'm stuck on the screen that is red/green/blue/white that shows the rom info and says USB at the bottom when plugged into the pc. I tried a hard boot/soft etc. and can't find a solution. Also activesync is not recoginizing it. Thanks much for any help.
i believe you have to flash it with a new rom/radio.
download the the newest radio. connect your phone via usb. your screen should be in the tricolor (2.40spl) at this point. run the radio flash.
Download a new rom. do the same as above.
to get to tricolor screen (hold power + camera + press soft reset)
Yeah i'm thinking I might have to load it from the SD card but I can't find my stinkin adapter so I can format the SD card. Activesync is not recognizing my phone at all.
=I'm stuck on the screen that is red/green/blue/white that shows the rom info and says USB at the bottom when plugged into the pc.
Click to expand...
Click to collapse
it IS recognizing the phone being plugged in if it says USB at the bottom, so just flash a new rom/radio and you should be good.
HOLD, Give a little more info please
wilmheath said:
Yeah i'm thinking I might have to load it from the SD card but I can't find my stinkin adapter so I can format the SD card. Activesync is not recognizing my phone at all.
Click to expand...
Click to collapse
OK, before it is bricked, tell us the numbers on the rainbow screen, then if it is 1.6 then run the 2.40 olipro, then new ROM, then radio. It is not broken yet, activesync does not like it when the unit is in bootloader mode so it will not show it, but the RUU will work if you just go forward with it and when done it will get you out of bootloader. If you get confused and lost then being an alltel unit you can put the 1.6 bootloader back on, run the stock RUU from utstar.com, bring it back stock and start again.
I got it fixed and installed the sprint firmware but silly me let it run through the setup and now it's trying to use the spring network. Sometimes I wish i could punch myself in the face..
Ok so i got no2chem up and running great but I still can't actually dial out. When i dial it says i'm not allowed to etc after a few rings. Is there some way to change back to the alltel network?
ok now i'm running titan 3.35 but can no longer get active sync which is required to relock the phone. I've tried everything but activesync does not want to work anymore. Any ideas?
ok now i'm running titan 3.35 but can no longer get active sync which is required to relock the phone. I've tried everything but activesync does not want to work anymore. Any ideas?
Click to expand...
Click to collapse
First of all, you don't relock your phone...you leave 2.4-olipro on it because it's required to boot your phone with this rom on it.
Second, go into activesync settings and make sure usb is enabled in the connections.
get back to Alltel,,,,
wilmheath said:
ok now i'm running titan 3.35 but can no longer get active sync which is required to relock the phone. I've tried everything but activesync does not want to work anymore. Any ideas?
Click to expand...
Click to collapse
You will need to load up the PRL and then do IOTA.
madman34 said:
You will need to load up the PRL and then do IOTA.
Click to expand...
Click to collapse
I'm sorry but i'm not familiar with those terms. I do have USB enabled on activesync though but it never detects it.
From reading other threads I assumed I had to relock it, then reload the alltel rom to get the radio working again. Is there another way?
I got the factory alltel rom back in and working but it's not letting me make calls still. Any ideas on how to fix this?
Well i got my phone working finally but now the data line is not working. It says I need a password now which I haven't needed before.
I have a VZW HTC6800 and I need to get the SPL 2.40 on the device so I can move forward. I get to the point where it ask for the disconnect/reconnect but on the reconnect I cannot get it to see ActiveSYnc. I have searched for an answer and cannot find one. What danger would I have if I did not disconnect and continue will I still get the 2.40?
parcou said:
I have a VZW HTC6800 and I need to get the SPL 2.40 on the device so I can move forward. I get to the point where it ask for the disconnect/reconnect but on the reconnect I cannot get it to see ActiveSYnc. I have searched for an answer and cannot find one. What danger would I have if I did not disconnect and continue will I still get the 2.40?
Click to expand...
Click to collapse
you can make sure you got 2.40 correctly, by manually entering bootloader. (power+camera+reset) if it says that you have 2.40, then you got it. so you can proceed, if not then go back and try again to make sure you get it
I have a VZW HTC6800 and I need to get the SPL 2.40 on the device so I can move forward. I get to the point where it ask for the disconnect/reconnect but on the reconnect I cannot get it to see ActiveSYnc. I have searched for an answer and cannot find one. What danger would I have if I did not disconnect and continue will I still get the 2.40?
Click to expand...
Click to collapse
You're not supposed to see activesync at that stage. Disconnect and reconnect, and continue with the process.
Make sure also that you HEAR the tones that acompany the disconnect and connect... You will hear tones.... On disconnect you will hear tones that decend, and on connect they will ascend....
gbenj said:
you can make sure you got 2.40 correctly, by manually entering bootloader. (power+camera+reset) if it says that you have 2.40, then you got it. so you can proceed, if not then go back and try again to make sure you get it
Click to expand...
Click to collapse
OK...will try again...when I disconnect then reconnect this is done in the DOS window. After that I do I do hit continue and the RUU I guess you would call it comes up. In that procedure it request that an active sync connect be made and this is where I have been for hours trying to get it to connect. If I never disconnected in DOS I would be OK but I know this is required...
Oh well...must mean I do not need it...
OK...will try again...when I disconnect then reconnect this is done in the DOS window. After that I do I do hit continue and the RUU I guess you would call it comes up. In that procedure it request that an active sync connect be made and this is where I have been for hours trying to get it to connect. If I never disconnected in DOS I would be OK but I know this is required...
Oh well...must mean I do not need it...
Click to expand...
Click to collapse
Yeah it's fine...just keep going...as long as when you reconnect, at the bottom of the bootloader screen it says USB and not Serial, then you're fine.
Thx...that info did help...
For any newbies like me this might help. I followed the instructions hanging off each word for each step. One the SPL update entering into the Windows GUI and I attempting over & over to connect to active sync because the instructions state to do so before checking the box. Maybe it was dumb of me but I never saw it stated to ignore that step from WiKi page...so hope that helps someone down the road.
Pros...now that I am updated is it safe to add tweaking apps like tweaks2k2 or Pocket Toolman. I am sure some reg hacks are added but do not want to cross up anything with the new 312 rom? Please advise?
I have vista64 is there a way to install the spl using vista64 or the sd card
When I posted this I was on the 2.40 boot loader but now I am on the 2.47. This loader is loaded from the SD card so all the trouble I posted you will not see. Sorry I do not have the link but do a search for the 2.47 you will see it and how to load it off a SD card.
i really need help,
i started off connected to activesync but thn im getting error saying pput.exe is being used by something else now i have colored screen with TITA100 and SPL-1.30.Olipro
i dont know what to doo, please someone help, new in these filed.
Thank you
EDITED: got it working... sorry
Thx
my turn
I am trying this on my old 6800 ( broke rubber power button) before I do new one.
I am on Verizon, don't care about GPS, running STB but really like features on 6.5. I have read everything I can find and still confused. Do I need to change anything if all I want is 6.5?
Also, when asked to plug and unplug usb, I get tones remove and replug, but then I get connection error and stay in 3 color spl-2.40
Thanks...
Jerry
stuck in bootloader 1.20
i tried to upgrade my daughter's Titan, firmware 1.4 so fsirly old, no gps. When I started the phone hooked up fine with Mobile Device Center. I ran Olipro 1.2 fine did the unplug and replug fine and got success message. Then couldn't restart the phone and now it won't connect through Device Center, so nothing else will run. Wanted to run Olipro 2.40 and then flash a GPS enabled rom and radio.
I have read everything I can find on here, but without a connection thru Device Center I am stuck.
Have I bricked the phone?
Ok got the phone working again with extbl.
Thank for listening.