Related
Ok... so the project isn't dead... I want to take time to thank dzo.. He's freakin still working hard on this... I managed to get linux booted.. not android.. <--but thats because of the SD driver.. But dzo is a super smart guy.. and im sure he'll have that working... So.. I can hook my usb up.. and linux says usb connected.. disconnect it... and it says disconnected.. it makes me happy... I cant get it to initialize my modem... cause i don't have the correct password.. or something like that... so it gives me a generic ip.. which is 127.0.0.1
I can ping it.. and its there.. it can see it... When i try to ssh it via putty it says "connection refused"... so... I need to find out what im doing wrong there.. Im using port 22.. which i think is standard... but idk... Putty has a serial connection via com ports... but idk how to work that very well... so yeah... I think if we get some more people on this... We will be able to see Android on the titan pretty soon... Once again... dzo did all the kernals and everything... i'm just messing around with them.. thought id bring some titan people some hope...
yay linux but so far i cant think of any uses for it oh wells ill rember them as time goes
duongtran said:
yay linux but so far i cant think of any uses for it oh wells ill rember them as time goes
Click to expand...
Click to collapse
Android, right?
wasupwithuman said:
... so it gives me a generic ip.. which is 127.0.0.1
I can ping it.. and its there.. it can see it... When i try to ssh it via putty it says "connection refused"
Click to expand...
Click to collapse
127.0.0.1 is always mapped to localhost on a machine. if the only ip address your titan has is 127.0.0.1, then that means there either aren't any other interfaces recognized or other interfaces aren't configured. when you try to ssh to 127.0.01 from your computer, what you're really doing is trying to connect to the computer itself on port 22. if you don't have an ssh daemon running on your computer on that port, you'll get a "connection refused" error.
since your titan doesn't have an external ip address, you'll have to resolve that before you can attempt to connect to it.
Dude, I am in the same boat as you right now. Everyday I check to see if there are any advancements on Linux ported to the Titan. Any chance I can get my hands on your files? I am pretty decent with Linux and I can see what I can do.
same here I want those files. I can rock linux once it is installed.
The option to run Android on the Mogul would be full of win and pass.
Good luck getting it working guys! I'd help but I'm not nearly advanced enough in my linux knowledge to get it working.
I've got the SD driver working now, can somebody with a titan see if android boots for them.
go to.
http://it029000.massey.ac.nz/vogue/
for instructions...
awesome news!!! Testing now, will report back.
Excellent effort all ..!!!!
Even without Android, Linux on this phone will ROCK.
Android boots up and is really fast. Touch screen works but none of the other buttons do including the keyboard. I would like to see and gpe phone edition build that might be better because it would have a software keyboard and terminal for debugging.
Phone calls work!!!
I use sprint and both username and password are blank in my default.txt browser also pulls up google's webpage with these settings
edit: power button works sometimes.
This isn't working for me on my 4gb MicroSDHC card.... (I get some weird errors, I can post later if you want.) Does this support MicroSDHC?
I have a 2gb card and it works with that I don't know about anything larger.
worked on a 512mb card i had laying around... i don't think this properly supports MicroSDHC... altho it even recognized it as SDHC in the startup...
Is there anything you can do with this yet?
Does it use wifi?
Boots and runs fairly quick. Doesn't work on my sdhc card as well.
When using pointer location, the alignment is close in some areas, but way off in others. Would be nice to be able to align as this causes issues with selecting menu apps.
Pressing the Camera button brings up the on screen keyboard, but I can't get it to work. It just flashes when I try to select a letter and never types anything in the SMS message box or Browser.
After awhile, the hangup and pickup phone buttons stop working.
Not sure if data is working or not since I can't type anything in the browser.
I am able to place phone calls. Sometimes I can't hangup due to the hangup button stops working and it says touch screen is disabled during phone calls.
Other than that, very impressive that you got this up and going on our phones!
dzo, WORDS cannot describe how I am feeling right now...
Titan - DCD 3.2.0
Android boots up from my 2gb SD card, but same problem, keyboard just flashes, won't type, hangup button stops working from time to time, anything we can do about the keyboard? seems like the touch sensitivity is a bit off too
First of All...thanks DZO...this is great work.
this is nice...just when it was booting up it was looking really NICE. The red thing going left to right n i was like "WHOA NICE" lolz
same problems as others...
Hardware: keyboard doesnt function, Only Camera, power and Phone (ON/OFF)buttons work. The buttons didnt stop working for me like they did for others...even after running this for like 3 hours. Then again I ran it...and they stopped working.
Software: Keyboard comes up after hitting camera button, but does not type anything. while running "Pointer Tracker" from dev tools...the center of LCD seems to be aligned, but the outer alignment is a bit off to the center from all sides. Batt Indicator does not reflect true status always shows full.
I was able to make call, but phone reset itself after 2 rings out. Incoming comes in, doesnt ring, but viberates.
Unable to test: Data, Wi-fi, GPS
Overall its really nice interface, apps load pretty quick.
It looks like it's not working on my 6gb card:
I unzipped everything to my SDcard root, and I get this error:
"mount: mounting /dev/block/mmcblk0p1 on /Sdcard failed: No Such device or address"
"Failed to Mount SD Card"
So it looks like an SDHC issue?
Now...to convince my wife to let me borrow her 2GB card!
ok, on further reading on the error:
I'm getting a DATA CRC Error when reading from the card shortly after "Welcome to Vogue Linux"
I see the "Short Transger (512 != 4096)" before the buffer I/O Error
I can give more technical details if it would help, but they are tiny, and hard to read, so I'd like to transcribe only if it would be of help....
BTW - Does the bootloader have an option to create a text log file?
I'm using the Sandisk 6gb micro SDHC with a speed rating of 4.
HTC released a new stock rom for the sprint touch pro on 09-25-2009.
TouchFlo 3D updated to improve speed and stability
Dialer application enhanced to improve the handling of incoming calls
Resolves an issue using the “r” and “w” keys on the virtual keypad
Improves contact searching performance
Includes a variety of minor bug fixes
http://www.htc.com/us/SupportDownloadList.aspx?p_id=195&act=sd&cat=2
Does this ROM disable ability to Tether?
I read over on PPCGeeks that this ROM disables the ability to tether, has anyone tried?
It does disable the tethering hack. It prevents the ForceCellConnection key from being changed from "Phone as Modem" to "Sprint". When you change it, it immediately reverts back to "Phone as modem" in the registry. I suppose either a process is checking it constantly, or there's a process by which reg edits can be automatically reversed, or it is read only, or ...
Here's hoping some smart person will figure it out. The touch improvements in this ROM are huge (finger scrolling); they make the device ten times easier to use.
I am happy they fixed a few bugs, but this also means Touch Pro is not getting a Windows Mobile 6.5 upgrade. Too bad.
the mini-usb connector on my phone broke, so I can't get an activesync or usb connection. It charges, but that's it. Is there anyway I can do the rom update through a memory card?
thanks
from my understanding, rom update can do only sync with PC. So, you cannot do it.
Please tell me if I'm wrong
loaded ROM from mSD:
open HTC download with WinZip. Extracted NBH file to memory card
renamed NBH to RAPHIMG.nbh
inserted card
Hold Volume Down, Power, and then Rest
loads just fine. Also installed a Nascar and NFL app, in addition to changes as above.
that kinda sucks about the whole tethering thing, i shoulda looked on here before updating! but bluetooth may work for updating?? don't quote me though.
I don't know if anyone has a hack for these but there are two problems I found and have emailed HTC only to get the following response.
My Issues:
I downloaded the latest Rom Update for the Sprint Touch Pro and am having issues. First issue I found, with this update I seem to have lost the ability to select multiple emails for deletion. Secondly, when replying to text messages, windows used to mark the prior incoming message as read, now it leaves it unread. I have to navigate through each msg using the touchflo in order to mark them read. Any assistance regarding these matters would be appreciated. Thank you.
Click to expand...
Click to collapse
HTC Response:
I would be more than happy to assist you with this information. To select multiple emails on you device, go to your email inbox and tap Menu> Select Messages. You will have three options: All, All Below, and Several. All will select all you your messages. With All Below, you will select a message and all items below it will be selected. You can use several to pick and choose messages. As for the text messages, this feature was added with the update to ensure that you do not miss any of your messages. You phone is operating as intended.
If you have any other questions, feel free to contact us again. You can find additional support at our user forum www.htcwiki.com. There is also a customer satisfaction survey for you to take if you are interested.
Sam
HTC Tech Support
http://www.htc.com
Click to expand...
Click to collapse
Okay, thanks, I thought it was me
fio316a said:
I don't know if anyone has a hack for these but there are two problems I found and have emailed HTC only to get the following response.
My Issues:
HTC Response:
Click to expand...
Click to collapse
THANK YOU SO MUCH.
Sorry for the yelling. I saw this when I tried to select multiple messages and I thought I had put a registry hack or something in the previous ROM. They MADE it LESS useful?
What were they thinking? This is not user-friendly.
Ugh.
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
So someone has posted a fix for the txt msg issue on ppcgeek.com...
http://forum.ppcgeeks.com/showthread.php?t=87404&page=2
Look for the program called "LOSER's SMS fix.cab" in post #12.
i dont believe that.. i think they realized the mistake after the fact and making a stupid cover up story.. thats what made me go back to stock rom.. i dont have time to go in and out 49 times for A DAM TEXT. screw that... htc/microsoft FIX THIS PLEASE lol
mdmanning70 said:
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
Click to expand...
Click to collapse
really i never had that problem
i just received a tp from insurance today. how can i tell if my tp is running this rom?
it does appear to be running the latest sprint radio.
sherm420 said:
i just received a tp from insurance today. how can i tell if my tp is running this rom?
it does appear to be running the latest sprint radio.
Click to expand...
Click to collapse
If it is running the latest radio, it is also running this ROM. Stock ROM and stock radio are installed as a single upgrade.
mdmanning70 said:
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
Click to expand...
Click to collapse
Had the same problem.
After update, WMDC just shows red X.
Tried uninstalling WMDC, no joy.
Any suggestions?
I just received a new Touch Pro as a replacement, and it is running this new ROM update. The only problem im having is that Opera does not show up on the task manager at all. So when i close(minimize) it i have to reopen from the start menu or touchflo and then when it opens my tabs are still open. Anyone else having this problem? Anyone have a fix or idea?
New build (27/6/10): http://forum.xda-developers.com/showthread.php?t=640785 Thanks Rhobuntu team! Check the linked thread for download and changelog. Fyi, for it to boot, assuming you have a touch pro or fuze, RAPH100 or RAPH110, you must change the mtype is startup.txt to 1910.
Working:
Touchscreen and Calibration
Keyboard
Screen rotation (press end call)
Sound (at least partly; phh got alsa working)
Simple 3G setup: first start Menu -> Network -> Configure 3G, after that run Menu -> Network -> Activate 3G and wait about 40 secs for the Dialog to appear
Sleep and power button (Works on Rhodium though)
Charging (Might require to be plugged in in Winmo before booting ubuntu.)
Wifi should be painless now.
Cpu throttling for better battery life
Framebuffer (Slowly though)
Not working:
Bluetooth
Video acceleration
Capacitive buttons
Radio
GPRS
Brightness control (Works on Rhodium but might work if you use shift+4 and shift+5 and disable auto-backlight in WM)
Gsensor
Proximity sensor
Stylus removal detection
I'm working on it when I get the chance. I'm a college student learning electrical engineering so I don't have much time to work on this.
and how do we install it? im downloading the file now does it run with haret same as android off a SD card or does it need to be flashed?
driftoz said:
and how do we install it? im downloading the file now does it run with haret same as android off a SD card or does it need to be flashed?
Click to expand...
Click to collapse
Same as Android. Just put the folder and ubuntu.img in root and change your mtype.
ok thanks i seen the img file and was hoping i didnt have to flash cbf re flashing again and having to re-setup my old OS
ive just extracted the folder and img file to the root of my mem card and changed the mtype to the same number as it says for raph 1910 when using android i booted haret and all i got is a white screen it hasnt changed for last 5 mins.
Tell me how it goes. Specifically, try using the command line. My / key won't register, whether with hardware or software keyboard, which makes console commands all but impossible.
I think mine is currently building a data image. Not sure it's compiling something in Haret.
sorry i just found out when i saved the start up txt in the zip file it didnt save i just changed the mtype on the mem card and haret booted, but its stoped at msmfb_start_dma 6321.563 ms after vsync request but all the numbers on the screen keep changing been like this for 5 mins or so.
now the screen has gone black and have a little blue square on the top left of the screen, is it still loading or dont know ?
Mine is doing the samething. I opened the keyboard and closed it again and the text came back still doing the same thing.
Wil Badger said:
Mine is doing the samething. I opened the keyboard and closed it again and the text came back still doing the same thing.
Click to expand...
Click to collapse
yep same here center lights now flashing and liths r on but screen still isnt doing anything
I just remembered, you should rename your img to Ubuntu.img not ubuntuarm.img or whatever it is. *Facepalms*
Also, file structure should be:
/Sdcard/Ubuntu.img
/Sdcard/Ubuntu/startup.txt
/Sdcard/Ubuntu/zImage
/Sdcard/Ubuntu/initrd.gz
/Sdcard/Ubuntu/haret.exe
Now that would help wouldn't it. Give it a try in a minute.
Well it's running but clearly the calibration is off. Looking around now.
Let me know if your / key works. I need that for the console.
yeah very hard to use with the pointer with no config and also it double clicks almost every time i touch the scrreen, maybe u could talk to the people from xdandroid and see if u can get there touch config to work with this?
OK it runs that's a good thing now it's time to start playing with the calibration settings to try and get it close. right now it's about a 1/2" from where I touch.
CLICKABLE
Yeah I know. How will you edit it? Through the console on your phone or will you mount the img in linux? I tried using the console but, like I said, my / key doesn't work so commands are impossible. Does it work for you?
Oh I'll save that for later. Just wanted to make sure it loaded for right now. I'll see what I can do. maybe it's about time to download a new copy of linux.
wow amazing, hopefully this will get as much attention as android
siulmagic said:
wow amazing, hopefully this will get as much attention as android
Click to expand...
Click to collapse
the only thing though is this woulnt support calls or sms as far as i know im not a linux person if someones able ot make a app for it then maybe but to me its more like running a mini laptop i dont expect to see any phone support it but if anyone else knows more would be good to know. but to me this will not replace android but might be nice to run asside to android like winmo and android is atm for me.
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
patc said:
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
Click to expand...
Click to collapse
Hi Pat: Wellcome to this TG01 Thread (even for few days I assume )
Anyway, I use the famous app Modaco's NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
There is another app doing the same and more finger friendly here (but never tested):
http://www.modaco.com/index.php?s=&showtopic=246171&view=findpost&p=1265802
You can try both and review here , if you agree
By the way, as a accidental TG01 user, could you please compare features with your HTC Touch HD? Thank you in advance!
Thank you for the helpful response and welcome
I've tried both apps - the first one only disables connections in a sort of semi permanent way and says you have to manually stop any existing connections when you turn them off - the point is, I can't manually stop the existing connections, that's what I want an app to do, and what Comm Manager used to do!
The second one complains about the .net framework and refuses to run, even though I have the latest redistributable on there, having windows mobile 6.5...
So I'm still a bit stuck.
I will post a comparison when I get the chance
You are welcome! That's a bit odd. I've been using NODATA for ages, on mi former device and now on TG01 under WM6.1 and WM6.5.
You have to be off data (not connected or only wifi connected). Then you ENABLE of DISABLE each mobile connection with the soft key "Toggle" and that's all. Which ROM do you have? Does somebody else have problems with NODATA?
Hi everybody,
I'm having problems with nodata on myTG01 (Evealex V5 ROM).
As soon as I launch it, it gives me an error message.
It used to work great with the second original toshiba ROM.
Please, help me !
Install attached HTC comm manager.
and do the following for Wlan:
Go to key in registy "HKLM\Software\Drivers\WLAN" and copy the value from 'AdapterName" string. Now go to key in registry "HKLM\Software\HTC\CommManager\WLAN" and edit "DeviceName" string. You see there value like this: "{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511". Delete the last part of this value ("TNETW12511") and past the value "AdapterName" which you copy at end. Make soft reset and that is all. Now Wifi button on your device should work properly
All credits goes to myn. Here is the original thread [ROM] Myn’s Warm Eclair - [RLS1 - 06/17/2010] - An Accelerated Experience
Confirm working good on my NIKE100 on ext2 SD, so withour flashing, i can use Winmo n Android on the same device.
How to:
1. Download from the original thread, i'm using NoMORootFS for SD with 240x320 version
2. Backup! than, clear whatever "android" stuff you have from sdcard (I dont want it to get caught up in the install) especially your andboot folder
3. Extract contents of downloaded zip to temporary directory
4. Copy extracted /andboot folder to the ROOT of your SDCard
5. copy zimage to /andboot folder with this version (credit to mblaster) get in from http://84.23.71.227/kerneloftheday (i'm using zimage with vibration on my nike100 with zimageNike name)
6. overwrite default.txt with attached default.txt
7. Run HaRET, than hit “run” to launch android
8. Press and hold center of dpad after hitting "run" and follow the directions in the NoMoRootFs menu system
9. Install android system
10. Quit installer
11. Booting into Android
12. After you can see android logo wait about 15 minute
13. then shutdown and open up your phone again (should boot into winmo)
14. start haret and boot again to android
15. your android is ready to use
Working: Call, sms, ring, data (although there seems to be a little problem)
Not Working: Bluetooth, camera
Great job and a good tutorial buddy, I defenitly gonna give it a try.
ok, try it and share here, maybe it can make us nike user more familiar with android
Nice... But!
Nice one there. There is seems problem with the hardware keypad. The hardawre keypad works though keypad #1 when pressed twice sleeps nike. Maybe the said button is mapped for that function. Better if we can bring it back to the original function. Thanks again.
uhm...
Hey,
I copied everything onto my SDcard, into the /andboot directory
Haret.exe starts, holding the D-pad...Linux starts etc, but...then it hangs with an error "sh: 2 unkown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD card"
And from there on every button I press gives my weird syntax...
anybody knows what I'm doing wrong..?
Installed on ext2 partitions, now take some tests on my nike 100.
Problems I found:
- On boot I have Voice Search not responding.
- If I try to set mms settings the apn disappear (i use Wind in Italy), setting only apn and name work (i'm syncronizing with gmail)
Thanks a lot for this tutorial!
Many thanks for this post.
Three questions:
You are using kernel with vibration for niki200/300 on your nike100 and your screen dont freeze?
What's the problem with data connections?
It's android 1.6?
Regards!
ebautista said:
Nice one there. There is seems problem with the hardware keypad. The hardawre keypad works though keypad #1 when pressed twice sleeps nike. Maybe the said button is mapped for that function. Better if we can bring it back to the original function. Thanks again.
Click to expand...
Click to collapse
what do you mean by keypad #1? hardware numeric and alphabetically works on me.
and the android device keypad is different with winmo, in android there are back, menu, end key (CMIIW). so we need to map our device keypad to android one
hansie_k said:
Hey,
I copied everything onto my SDcard, into the /andboot directory
Haret.exe starts, holding the D-pad...Linux starts etc, but...then it hangs with an error "sh: 2 unkown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD card"
And from there on every button I press gives my weird syntax...
anybody knows what I'm doing wrong..?
Click to expand...
Click to collapse
when it tolds to hold d-pad, try to hold it or press it twice,it will come to installer screen, then install it first, after that you can boot android
vocione said:
Installed on ext2 partitions, now take some tests on my nike 100.
Problems I found:
- On boot I have Voice Search not responding.
- If I try to set mms settings the apn disappear (i use Wind in Italy), setting only apn and name work (i'm syncronizing with gmail)
Thanks a lot for this tutorial!
Click to expand...
Click to collapse
voice search: i don't use that, maybe that is the build error
never set mms, but if we set apn other MNC and MCC then it will disappear on apn list but it do work, myn is trying to fix this problem
Maxxd01 said:
Many thanks for this post.
Three questions:
You are using kernel with vibration for niki200/300 on your nike100 and your screen dont freeze?
What's the problem with data connections?
It's android 1.6?
Regards!
Click to expand...
Click to collapse
yes, my screen is not freeze
data connection?my apn setting no showing on apn list but it do connect, but sometimes i find it is more difficult to make connection, don't know if it is eclair probelm or network problem
no, it is eclair, android 2.1
waiting for froyo to come here
youngsien said:
voice search: i don't use that, maybe that is the build error
never set mms, but if we set apn other MNC and MCC then it will disappear on apn list but it do work, myn is trying to fix this problem
Click to expand...
Click to collapse
youngsien said:
yes, my screen is not freeze
data connection?my apn setting no showing on apn list but it do connect, but sometimes i find it is more difficult to make connection, don't know if it is eclair probelm or network problem
no, it is eclair, android 2.1
waiting for froyo to come here
Click to expand...
Click to collapse
The APN editing issue is caused from the paid market enabler script that is running as a service. It is trumping changes made to the APN list.
I am going to talk to dzo about making the same changes he made in the Donut ril for me. This should hopefully eliminate this issue.
The Voice Search Wait/Force close on start is a known issue and unfortunately in this build is more of an annoyance. For now just click the "Wait" button.
Okay, tested it today almost the whole day, started with full battery at 08.00, very surprised about the graphics and the response of my Niki, lot's of stuff are working, internet connection worked, hardware keypad was working normally, Gmail working, incoming and outgoing call's working, sms working.
Only tested those things because it's a phone and those things are the most important for a phone (my opinion).
Try to acces my sim-card to add contacts but wasn't able to do that.
Okay at 19.45 my battery is empty, be aware my battery is 3 years old.
Conclusion, for me it is a perfect working phone, sometimes you need a little bit patience to let the phone do his job.
Thanks youngsien
Any chance of getting CDMA functionality for this?
youngsien said:
when it tolds to hold d-pad, try to hold it or press it twice,it will come to installer screen, then install it first, after that you can boot android
Click to expand...
Click to collapse
I've tried after I read this reply , ( try to hold d-pad or oress it twice)...
It's still not work.
maybe we need the file = "system.img") that not provided on sdcard.
myn said:
The APN editing issue is caused from the paid market enabler script that is running as a service. It is trumping changes made to the APN list.
I am going to talk to dzo about making the same changes he made in the Donut ril for me. This should hopefully eliminate this issue.
The Voice Search Wait/Force close on start is a known issue and unfortunately in this build is more of an annoyance. For now just click the "Wait" button.
Click to expand...
Click to collapse
hey, the creator Myn is here, is it ok if i post your build in here? i hope nike user can has some fun to get android run on their device.
Can you please talk to dzo to make bluetooth enable for nike too? i think this is the minus one for nike user, kaiser and polaris even can use wifi and bluetooth but for us nike user, we don't have wifi but we can't use bluetooth also
will wait for your next release. thanks.
Rataplan said:
Okay, tested it today almost the whole day, started with full battery at 08.00, very surprised about the graphics and the response of my Niki, lot's of stuff are working, internet connection worked, hardware keypad was working normally, Gmail working, incoming and outgoing call's working, sms working.
Only tested those things because it's a phone and those things are the most important for a phone (my opinion).
Try to acces my sim-card to add contacts but wasn't able to do that.
Okay at 19.45 my battery is empty, be aware my battery is 3 years old.
Conclusion, for me it is a perfect working phone, sometimes you need a little bit patience to let the phone do his job.
Thanks youngsien
Click to expand...
Click to collapse
yup, seems like battery problem still there,can't compare to winmo. Lose in battery, bluetooth, and camera. hey you can manage it for a long time, do you have data always on?how was you using it?
88fingerslukee said:
Any chance of getting CDMA functionality for this?
Click to expand...
Click to collapse
don't know about that. soryy....
Dricos said:
I've tried after I read this reply , ( try to hold d-pad or oress it twice)...
It's still not work.
maybe we need the file = "system.img") that not provided on sdcard.
Click to expand...
Click to collapse
no, system.img is created in /andboot when installing, no need to copy file "system.img". here is the step i usually use. when starting haret and hit run, lot of text (linux boot style) come out. ok from now press and hold center d-pad, after some page it will halt with the message "press center d-pad to....." then release your 1st d-pad hold then press and hold once again. you should see some weird code on your screen but that's ok. after that you will come to installer screen to make system.img and data.img on your sd.
hope you understand, sorry for my english
thanks
youngsien said:
don't know about that. soryy....
Click to expand...
Click to collapse
Darn.
I think it actually already has CDMA functionality since this came from the Vogue thread, but I'm not unsure as to how to get the default.txt file right so that it will boot. Does anybody know of a guide to the the android linux boot commands? It's possible that the devices differ enough to require some different commands.
88fingerslukee said:
Darn.
I think it actually already has CDMA functionality since this came from the Vogue thread, but I'm not unsure as to how to get the default.txt file right so that it will boot. Does anybody know of a guide to the the android linux boot commands? It's possible that the devices differ enough to require some different commands.
Click to expand...
Click to collapse
theoritically is right, but i don't know about that, do you ever asked mblaster on his nike myn donut thread?he is more master in this, because he can compile zimage kernel for nike. maybe he know the answer.
Hi all, I've tested yesterday and this morning...
I found it unstable, after I have set the apn I tried to sync with gmail accont, but never work (always "problem with the sync" reported).
Sending and receiving sms work, make calls work difficult, sometimes i heard but on the other side doesn't hear me.
I try to reinstall and don't set the APN, but anything solved.
Last, after reinstall, when I call it goes to sleep mode but no more wake up (using camera button twice, or other buttons).
I'll do more test, hope this can help.
Bye
p.s. sorry, I speak english only a little bit
Hi all,
Nice build...
Anyway, although it's very hard to resist, imho it's a good idea to wait a few more days until Myn releases the next Versions. If you follow the original Thread in the Vogue forum, you'll see that there are still a lot of problems even for the Vogue Users. For that reason it's probably a good idea to wait until the big one's have been fixed...