Related
Is there anyone in San Diego that could install a fast, smooth and reliable version of Android on my HD2? If so, please let me know when you can do it and for how much $.
I spend my time between coastal North County and Chula Vista.
Thanks
Steve
It's so simple. Why on Earth would you pay someone to do it?
You download the one that looks best to you from HD2 Android Development, unzip it, and put the Android folder onto your sd card.
Not inside any folders on your card, just on the card.
Then in Windows Mobile, you go to your file explorer, go into the Android folder on your sd card, tap CLRCAD (nothing will happen, thats ok just tap it each time you start Android) and then tap Haret.
It really is as simple as putting a folder onto your sd card.
Just do it yourself. If you manage to screw it up, it won't mess up your phone and somebody on this forum will take pity on you and show you where you messed up
don't forget to flash a newer radio!
kypeth said:
don't forget to flash a newer radio!
Click to expand...
Click to collapse
good point, forgot about radio.
as long as it's a XX.XX.50.XXX radio, its good
I started this thread because I had just discovered that I can't do the install on my mac with an emulator. I really need to do it myself just so I know how to do it so I don't have to hassle finding someone to do updates. Sooooo, I'm doing a clean install on an old Windows machine just to get this done.
Are there simple non-developer instructions anywhere on how to do this? I've had two people tell me how simple this is but the instructions on this forum don't seem that simple with terms like "flash, etc. What does the term "flash" mean?
magentawave said:
I started this thread because I had just discovered that I can't do the install on my mac with an emulator. I really need to do it myself just so I know how to do it so I don't have to hassle finding someone to do updates. Sooooo, I'm doing a clean install on an old Windows machine just to get this done.
Are there simple non-developer instructions anywhere on how to do this? I've had two people tell me how simple this is but the instructions on this forum don't seem that simple with terms like "flash, etc. What does the term "flash" mean?
Click to expand...
Click to collapse
It's called that because of the type of memory. Anyway, it basically means install. "Flashing" a new radio means you're installing a different version while overwriting the existing one.
HOW TO FLASH:
Use "CustomRUU.exe" to flash the file (.nbh file extension). Phone must be connected and have >50% battery. If the CustomRUU.exe isn't included, download here:
http://forum.xda-developers.com/attachment.php?attachmentid=239860&d=1256298258
Step 1 - HSPL3 must be installed.
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
The .zip attached to this must be extracted and installed. Simple enough, no?
Step 2 - Flash a new Radio ROM.
I recommend the newest one (2.15.50.14)
http://forum.xda-developers.com/showthread.php?t=611787
Step 3 (OPTIONAL) - New Windows Mobile ROM
I put optional because Android will run without a different one, it just might not be as well. Download the "RELOADED 3" one in red. I use this one. Flash the same way.
http://forum.xda-developers.com/showthread.php?t=776971
Step 4 - Download Android flavor of your choice and copy it onto your SD card. I recommend http://forum.xda-developers.com/showthread.php?t=870518
Step 5 - Go into WM, navigate to the Android folder on the root of your SD, and click CLDCAD.exe (nothing will happen, this is normal) then click haret.exe
Step 6 - Celebrate.
If you need any help, feel free to message me.
No can do with any Virtual Machine on Macintosh?
Just use the newest official.They come with a newer radio.
If you cant flash with your mac extract the file and copy the nbh file as leoimg.nbh in the root of your SD.
Start the phone with vol down and let it flash.
sthEn said:
No can do with any Virtual Machine on Macintosh?
Click to expand...
Click to collapse
Instead of a virtual machine (is it Parallels?) why not use BootCamp, then you have a full Windows os on your mac - and you can flash.
I'll see if I can borrow a mac again and test flashing via Parallels.
I would love to help you for free - you just have to spend a plane ticket from Denmark (with lots of snow and freezing temperature) ;-)
fred_up said:
Instead of a virtual machine (is it Parallels?) why not use BootCamp, then you have a full Windows os on your mac - and you can flash.
I'll see if I can borrow a mac again and test flashing via Parallels.
Click to expand...
Click to collapse
I am a mac user and i used both Parallels and boot camp and i did it successfully without any issues.
I am a mac user and i used both Parallels and boot camp and i did it successfully without any issues.
Click to expand...
Click to collapse
I'm utterly stunned... I thought a Mac could do everything... and do it better than Windows, faster than Windows, more stylishly than Windows and made the user more intelligent, more likable and better looking at the same time...
Oh well...
I'm in South Orange County...If you don't get it figured out, and you are willing to come to me, I will do it for free. Just let me know.
mm0
Airborne Aircrew said:
I'm utterly stunned... I thought a Mac could do everything... and do it better than Windows, faster than Windows, more stylishly than Windows and made the user more intelligent, more likable and better looking at the same time...
Oh well...
Click to expand...
Click to collapse
On the few times I have run Windows on a Mac (via Parallels and Bootcamp), it runs really well. It just goes to show that the main problems with Windows is that of the sloppy drivers for the hardware that the hardware manufacturors provide. Since Apple only have a couple of computers, therefore they can afford to take time to develop device drivers for Windows.
Just to clarify please and sorry to be asking lame questions...
1) Is this true? "The best most reliable Froyo ROM for the HD2 is the 2.2.1 Custom Nexus HD2-FRG83D V1.8 Froyo ROM. Very stable and everything works perfectly." Is that accurate?
2) Are you saying that I can do the entire install of everything on my Mac with an emulator (VMWare Fusion) as long as I do it the way you describe?
3) Are you saying that I should change the name of the nbh file to leoimg.nbh and then drop it into my SD card?
4) My HD2 came with Android on it but it runs slow and clunky and won't make calls, etc. Its basically unusable so I'm assuming it wasn't installed correctly. There is nothing on the SD card that I care about. Should I format the SD card before starting the new build? And is there anything on the Windows side that I should delete first before starting too?
Thanks again.
Steve
Ultimaex said:
Just use the newest official.They come with a newer radio.
If you cant flash with your mac extract the file and copy the nbh file as leoimg.nbh in the root of your SD.
Start the phone with vol down and let it flash.
Click to expand...
Click to collapse
I would be willing to pay somebody for simple step by step clear non-nerdy instructions on how to install this stuff (Android, reformat SD card to FAT32, radio, etc., etc.) Seriously! You know, Step 1: Do this ya moron. Step 2: Now put this file named this in here idiot. Step 3: Now do this retard, etc.
Here are some more questions please...
1) What is the difference between a "sense" build and a "non-sense" build? Advantages, disadvantages?
2) When I plug the usb from my hd2 into my computer I don't see or recognize what is the SD card folder and I don't know where to install what I'm supposed to install. Here is what I see...
Removable Disk (E) > Application Data folder > HTC folder > databases folder > DocExp folder (with all this stuff in the DocExp folder: flintlock, postlist, postlist.baseB, record.baseA, termlist, termlist.baseB, iamflint, post.baseA, record, record.baseB, termlist.baseA)
...and next to the Application Data folder above there is also this: EncFiltLog.menc
and this is also in the HTC folder too...
ImageCache folder > DocExp folder (which is empty)
Thanks again.
Steve
magentawave said:
I would be willing to pay somebody for simple step by step clear non-nerdy instructions on how to install this stuff (Android, reformat SD card to FAT32, radio, etc., etc.) Seriously! You know, Step 1: Do this ya moron. Step 2: Now put this file named this in here idiot. Step 3: Now do this retard, etc.
Here are some more questions please...
1) What is the difference between a "sense" build and a "non-sense" build? Advantages, disadvantages?
2) When I plug the usb from my hd2 into my computer I don't see or recognize what is the SD card folder and I don't know where to install what I'm supposed to install. Here is what I see...Removable Disk (E) > Application Data folder > HTC folder > databases folder > DocExp folder (with all this stuff in the DocExp folder: flintlock, postlist, postlist.baseB, record.baseA, termlist, termlist.baseB, iamflint, post.baseA, record, record.baseB, termlist.baseA)
...and next to the Application Data folder above there is also this: EncFiltLog.menc
and this is also in the HTC folder too...
ImageCache folder > DocExp folder (which is empty)Thanks again.
Steve
Click to expand...
Click to collapse
OK, when you first start up your phone, and there are little red numbers and stuff down it the corner, look next to the letter 'R'
If it is X.XX.50.XXXX, then you're OK and don't need to change radio's and the process is very simple. (The X's can be any number, doesn't matter, as long as the 3rd set as shown are 50, not 51 or anything else.) So if it's 50, don't worry about the signed_ruu.nbh file or leoimg.nbh or flashing a radio. If it's not 50, you will need to change radio.
Next, when you plug the phone to your computer, the place where you find the 'Application Data' folder and the file 'EncFiltLog.menc', that is the root of your sd card. That is where the Android folder that you download and unzip will go.
So you will download the nicest looking build that you like the best, it will be in a .zip or .7z archive. You open the archive and take the 'Android' folder out and place it on your desktop. Then you drag it and drop it right next to your 'Application Data' folder. Don't put it in the 'Application Data' folder, just in the same place where that folder is at.
Removeable Disk E is your memory card, the root of the card simply means just on the card, not within any folders on the card, just on the card. That's where the Android folder goes, on the root of the card.
As far as Sense vs. No-Sense builds, Sense is maybe a little more user(noob) friendly, but it uses more of your phone's resources, so sometimes tends to lag (slow down, run slow) more than a no-sense build. For you, I would say try a Sense build first. Once you have installed one build, you will become more confident and really see how easy it is. Then you can experiment with different builds and see what is best for you.
After you have put the Android folder on the root of your sd card, alls there is left to do is to use the File Explorer on your phone to find the Android folder on your sd card, go inside that folder, first tap CLRCAD (it won't appear to do anything, but it actually enables sound in Android) (if your phone says the application is not from a trusted source,and asks do you want to continue, just click 'yes') and then tap Haret, a box will appear with a progress bar, and then Android will boot up (start).
The first time you run an Android build, it can take up to 15 minutes to start up. This is normal, just give it a while.
Then when it starts up, enter all the data it asks for (GMail, email addresses, etc. nothin major) and then when you have finished with that, and you end up at the phone's Android homescreen, hold the 'End Call' button, and choose 'reboot' and if there's no reboot option, just choose 'shut down' and then restart Android the same way as before. For some reason, rebooting after the first time like that actually helps Android to run more stable over the long term.
If you follow these instructions exactly as I have written them, you cannot fail. Now go, and enjoy Android
No need to pay me, just remember the 'thanks' button
On the few times I have run Windows on a Mac (via Parallels and Bootcamp), it runs really well. It just goes to show that the main problems with Windows is that of the sloppy drivers for the hardware that the hardware manufacturors provide. Since Apple only have a couple of computers, therefore they can afford to take time to develop device drivers for Windows.
Click to expand...
Click to collapse
I think you prove my point quite well... Macs are pretty much a single entity unto themselves. What Apple says, goes. Nothing else is acceptable. If you are prepared to be so limited then go ahead and stay with Apple products - they are for those who think they have imagination but are actually fooled into a "groupthink".
Huggs! Thank you very much for taking the time to explain that to me.
I installed Android and added my info (email address, etc.) and then restarted it like you said to do. Of course Windows loads first and when I tap the Android icon to launch Android it says: "The file Android cannot be opened. Either is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file." Since this phone had Android on it when I bought it last week (but it didn't work properly), I'm assuming that is the old Android launcher?? I did reformat the SD card via the Windows side of the phone before I installeded Android just now. Can you or anyone please tell me how I can get Android to launch now?
Thanks again.
Steve
UPDATE: I opened the Android folder and tapped CLRCAD and then HARET again and got the same error message as I explained above when I tap the Android icon. Also, and maybe this is normal since I'm still in Windows, but when I try to open any of the other files in the same folder (like INITRD, ROOTFS, etc., I get an error message that says: "There is no application associated with XXXXX. Run the application first, then open this file from within the application."
Another question please: The guy I bought this phone from was using T-Mobile but I'm going to use Simple Mobile. Does doing all the stuff I just did unlock this phone or do I still need to use an unlock code when I insert the sim card? (I will need to call Simple Mobile to activate the new Simple Mobile sim card in order to transfer my existing number over to this HD2)
Install this .cab in WinMo (install to device not sd)
Soft reset device (just fully off n then on, not factory reset)
try running Android again
Sounds like your phone just doesn't trust Haret, this should make it relax a little
let me know how it goes, it should work for ya
Welcome To PS3DJB Multi for TP, Fuze, TP2, Tilt2, Diamond, Diamond CDMA, and Diamond 2
NOTE:
I have not tested it with these phones as i do not own them anymore. Please let me know how it goes for you and i will try to help out during the process. It should work as everything is based off of working solutions but just made to be use in a simpler fashion by my app. If you have issues and need help hit me up on skype: hackmimic
i might be hit or miss for the next couple days.
Please install the prep file based on your rom region.
Prep Files:
*Must Install to your Storage Card*
Storage Card - English - Download Here
Storage Card - German - Download Here
Storage Card - Norwegian - Download Here
Storage Card - French - Download Here
Storage Card - Spanish - Download Here
Internal Storage - Diamond - English - Download Here
Main App:
PS3DJB Multi - Download Here
Initial Steps:
Run Step 1. select your phone Type
Run Step 2. Select your payload of Choice
Run Step 3. Launch PS3DJB Multi (this will have all the initial setting pre set up.
To enable Jailbreak:
* Disconnect USB from PC
* From XDANDROID go to DevTools->Terminal Emulator
* Type "su", then "cd /sdcard", then "insmod psfreedom.ko" (without "")
To enable Downgrade:
* Disconnect USB from PC
* From XDANDROID go to DevTools->Terminal Emulator
* Type "su", then "cd /sdcard", then "insmod psfreedom.ko jig=1" (without "")
Downgrade Process:
1. start PS3DJB and go through steps 1-3
2. open terminal emulator (programs/dev tools/terminal emulator)
3. type su
4. type cd sdcard
4. type insmod psfreedom.ko jig=1
5. plug phone into PS3
6. Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject.
7. ps3 turns on then off automaticly.
8. disconnect your phone and turn on console to make sure you are in Factory/Service Mode. You will see a huge red box on the screen saying Factory/Service Mode.
9. Turn the PS3 off again.
10. Load any blank FAT32 USB flash drive with 2 files in the root directory:
1. Modified 3.41 PUP
2. Lv2Diag.self (File 1)
These must be the only files on the USB drive and must be placed in the main (root) directory.
11. Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see a black screen but the PS3 HDD light will flash.
12. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
13. Remove the flash drive and turn on the console, you will still be in Factory/Service Mode. Please verify you have downgraded successfully to version 3.41 by going to “System Information”. Turn the PS3 off.
(Optional) – If you wish to downgrade to any older firmware you can follow steps 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
14. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
15. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
Remove USB flash drive and turn on your console again. You will be out of Factory/Service mode and back in retail mode with your chosen firmware version installed.
what are insmod, rmmod, lsmod?
insmod installs a loadable module in the running kernel. (to load psfreedom)
rmmod unloads loadable modules from the running kernel. (to remove psfreedom)
lsmod shows information about all loaded modules. (to show you if psfreedom is running or not)
Credits:
Everyone who contributed to PSFreedom Wiki
axm9 for a good tut i borrowed to save time rewriting the same crap.
Tbdawg for helping with the storage card code
Thanks for your work HackMimic. Do you think this will work with a Touch HD (not HD2)? I did not see it in the list above or in the screenshot.
Touch Diamond 2(Topaz)
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
Appears ERROR
Missing Method Exception
Could not load type
"BeeMobile.TransparentControls.TForm"
of assembly
"BeeMobile.TransparentControls.CF3, Version 3.5.6.6, Culture = neutral,
PublicKeyToken = D07520D8A3E7B282 ".
Main App:
PS3DJB Multi Attached for those who had error link download like me I could not post the link download as I'm new here so I've attached the file
Many Thanks for the app. I have Diamond 2 I'll try and let you know the result
Nikolai4eg said:
Touch Diamond 2(Topaz)
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
Appears ERROR
Missing Method Exception
Could not load type
"BeeMobile.TransparentControls.TForm"
of assembly
"BeeMobile.TransparentControls.CF3, Version 3.5.6.6, Culture = neutral,
PublicKeyToken = D07520D8A3E7B282 ".
Click to expand...
Click to collapse
do you have .net compact 3.5 installed. That is required as I built the app on .net compact 3.5. Also try to install both cabs to the storage card.
im lost, what does this app do?
usukaz said:
im lost, what does this app do?
Click to expand...
Click to collapse
it sets up Android to allow you to downgrade or jailbreak your ps3.
Type "su", then "cd /sdcard", then "insmod psfreedom.ko
I write in the terminal emulator
su cd/sdcard/payloads/insmod psfreedom.ko
In response:
su:exec failed for psfreedom.ko Error:No such or directory
Nikolai4eg said:
Type "su", then "cd /sdcard", then "insmod psfreedom.ko
I write in the terminal emulator
su cd/sdcard/payloads/insmod psfreedom.ko
In response:
su:exec failed for psfreedom.ko Error:No such or directory
Click to expand...
Click to collapse
are you using a WWE rom or a foreign rom? i have found some issues that i need to correct. I will have an update in the next couple days. Just need to find the time to do it.
Try this:
type su then enter
Type cd/sdcard then enter
type insmod psfreedom.ko then enter
if it does not work that means i might have a issue with the payload included. I will investigate deeper.
PS i fixed the download link.
I've tried on my Diamond 2
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
4 step)choose phone mode
when I choose diamond 2 or any other device it says "no file or no directory"
so what I've done is copying the startup config and put it manually on haret folder then when I started haret (or select launch PSDJB Android in program) it seems launched successfully but suddenly it freezes and doesn't boot!! the screen stays on " booting Linux" the only choice I have then is to soft reset my Diamond2
Any ideas !?
Thanks for your help
Is it ever possible to run ps3djb on OMAP850 devices like HTC Prophet?
Android can be installed here as a port of Wing Linux
dante_cry said:
I've tried on my Diamond 2
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
4 step)choose phone mode
when I choose diamond 2 or any other device it says "no file or no directory"
so what I've done is copying the startup config and put it manually on haret folder then when I started haret (or select launch PSDJB Android in program) it seems launched successfully but suddenly it freezes and doesn't boot!! the screen stays on " booting Linux" the only choice I have then is to soft reset my Diamond2
Any ideas !?
Thanks for your help
Click to expand...
Click to collapse
i am going to need to look into it. it might have to do with the zimage or bin for psfreedom. I will look deeper into it as i might have a diamond to play with tomorrow.
on older devices i will need to look into it. not sure if psfreedom supports those devices.
I moved the file from PS3DJB/Startup config / Topaz / startup.txt
in PS3DJB
Then
From PAyloads/341/zlimage6 in PS3DJB and renamed and replaced by zlimage.
Then
File from the payloads / modules 2.6.2 ..... moved to a folder and PS3DJB psfreedom1.ko moved to Storage card and renamed psfreedom.ko
Launched HARET in folder PS3DJB
Run Android
Then
menu devtools terminal emulator
And he wrote
su (press ENTER)
cd (space) / sdcard (press ENTER)
insmod psfreedom.ko (press ENTER)
END
Diamond CDMA Problem
Problem with Diamond CDMA -
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
4 step)choose phone mode
when I choose HTC Touch Diamond CDMA or any other device it says "file or directory is missing"
Thanks for your help.
andyandmarlys said:
Problem with Diamond CDMA -
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
4 step)choose phone mode
when I choose HTC Touch Diamond CDMA or any other device it says "file or directory is missing"
Thanks for your help.
Click to expand...
Click to collapse
See if this file exists:
\Storage Card\PS3DJB\STARTUP CONFIG\DIAMOND100\STARTUP2.TXT
and if so rename and copy here:
\Storage Card\PS3DJB\STARTUP.TXT
This is of course assuming "\Storage Card" is the name of the path to your removable Storage.
Will this work on a HTC HD (Blackstone)?
Good App btw congrats
tbdawg said:
See if this file exists:
\Storage Card\PS3DJB\STARTUP CONFIG\DIAMOND100\STARTUP2.TXT
and if so rename and copy here:
\Storage Card\PS3DJB\STARTUP.TXT
This is of course assuming "\Storage Card" is the name of the path to your removable Storage.
Click to expand...
Click to collapse
On thee CDMA Diamond it is "\Internal Storage" but.... I didn't see a startup2.txt in the \Internal Storage\PS3DJB\STARTUP CONFIG\DIAMOND100\. There was a startup text file though. I tried copying that to the Internal Storage\PS3DJB\ folder, but I am still getting the same problem.
Am I running into an issue because the CDMA Diamond doesn't have a storage card, and only the internal storage?
Thanks for helping out so fast!
Andy
dante_cry said:
I've tried on my Diamond 2
1 step)I install Storage Card - English
2 step)Install PS3DJB Multi
3 step)PS3DJB multi run.
4 step)choose phone mode
when I choose diamond 2 or any other device it says "no file or no directory"
so what I've done is copying the startup config and put it manually on haret folder then when I started haret (or select launch PSDJB Android in program) it seems launched successfully but suddenly it freezes and doesn't boot!! the screen stays on " booting Linux" the only choice I have then is to soft reset my Diamond2
Any ideas !?
Thanks for your help
Click to expand...
Click to collapse
I more or less did this on the CDMA Diamond, and it looked as if Linux was trying to load, however the screen goes black and just did a soft reset.
andyandmarlys said:
On thee CDMA Diamond it is "\Internal Storage" but.... I didn't see a startup2.txt in the \Internal Storage\PS3DJB\STARTUP CONFIG\DIAMOND100\. There was a startup text file though. I tried copying that to the Internal Storage\PS3DJB\ folder, but I am still getting the same problem.
Am I running into an issue because the CDMA Diamond doesn't have a storage card, and only the internal storage?
Thanks for helping out so fast!
Andy
Click to expand...
Click to collapse
It seems that the app may not be recognizing the "\Internal Storage" path as a card path. Are you by any chance getting a message box popping up stating:
No Storage card found.
If card has not been inserted, do so now then select Retry.
when you start the app?
Or a message box stating that there were:
Multiple storage cards found!
and then asking you the if the path displayed is the correct path?
Try downloading this, extract the .exe and run from your phone. Report back what the output of the SD Count and the Path(s) in the box are.
View attachment SDCard.rar
There is no SD card on the Diamond CDMA... Just the internal storage. I was able to get linux to attempt to run, but it freezes and restarts my device.
Hopefully the OP will be able to play with the Diamond he might be getting, and see if it is possible to get it to go.
Thanks
hi i just got this phone and im new to all this any suggestions to how to start messing with it im kinda lost on it.
Most of all the Roms, Tweaks, Apps and themes are personal pref. best to get to grips with the device and surf the forums to find things you like.
P.S Welcome to the site!
BATMAN_SBP said:
hi i just got this phone and im new to all this any suggestions to how to start messing with it im kinda lost on it.
Click to expand...
Click to collapse
1.Flash HSPL (Search forum for DL)
2.Upgrade Radio (Ive used 2.12.50.02_2 for ages works great -search forum for DL again)
3.then format SD Card (use your WinMo again to do this - app is in there somewhere)
4.Download an Android Build (Try darkstones SuperRAM build v1.5 - really good!)
5.Unzip Android Files and put into SD card (Sync phone to PC and drop files into SD)
-a. Press CLRCAD (use Windows Mobile File Explorer to Nav to android folder on SD card)
-b. Press Haret (Same process as CLRCAD)
Android will Boot and congrats -
(IMHO dont play with custom ROMS Windows Mobile use stock WWE or whatever - Stick to Android especially when NAND is around the corner..if your going to Windows wait for WP7 - IMHO)
check your software version in case you need to update..few apps to start you off
cookies home tab2 and cht editor
bsb tweaks
open market
again like previous op, do a search as these questions have been asked many times
All .cab files have to be coped to your memory card and run from there. Cab files cannot be unzipped and run from your computer.
Lots of fun ahead of you. Welcome.
This thread will host all of your Remix OS for PC error log reports so we can better troubleshoot your issue. Please follow the instructions below:
To send us error log reports for Remix OS for PC, please follow these instructions:
http://bit.ly/2dMjx4S
Then, please post your error logs in this thread in the following format:
Issue you're experiencing (ie. Using Gaming Toolkit causes my games to crash)
Exact steps to replicate the issue (ie. 1. Open up your game of choice 2. Open Gaming Toolkit 3. Game crashes)
Go to 'Settings > About tablet > Remix OS version' and list your Remix OS version
IMPORTANT: The above information enable your log files to be useful to us for troubleshooting your issue. If you don't include the above information, we cannot troubleshoot your issue effectively.
Finally, attach your log files here in the comments below this post.
IMPORTANT: You MUST use the 'Go Advanced' option when commenting in this thread to attach your log files.
1) Video Playback issue... in all apps including Youtube, MX Player.. but not Kodi.
2) Open Youtube app, can't play any quality above 240, hangs at a frame then skips then repeats. It shows libStagefright metadata error in logcats in Youtube and other appications
3) Running Remix OS version 2.0.206
AMD Athlon Dual Core 2.00 Ghz, 32 bit installation, 3 GB ram, Nvidia Gefore 8200 mg.
For this specific video card, please add this command to init.sh in future versions to fix a nouveau bug related to thermal settings causing the screen to flickr badly making it useless, so that I, and other users having the same card, don't have to manually enter the command each time we boot Remix OS.
"echo 135000 > /sys/class/hwmon/hwmon1/temp1_max
echo 135000 > /sys/class/hwmon/hwmon1/temp1_crit
echo 135000 > /sys/class/hwmon/hwmon1/temp1_emergency"
Please rename logcat.zip to logcat.txt
orfox does not load, it opens and shuts down a split second later.
remix os 3.0.206
HIT freezes up. https://play.google.com/store/apps/details?id=com.nexon.hit.global&hl=en
Volume going up and down like crazy !!
Online Suport by: Cameron Yan
The mail I sent this October 14, 10:54 CST:
Hi, I have installed the Remix OS in my HP Pavilion dv4-2170us and everything worked fine untill I pressed the power button (in the OS menu) and selected the ''standby'' option...
That's when the system freezed (but the music still playing at the background), I tried pressing every button, but still nothing happened.. That's when I decided to force shutdown the laptop by holding the power button.
Then I turned it on again, and when the OS finished loading, the first I see is the volume gui showing and hidding over and over again, and the volume going up and down like crazy!... Since then I have been trying to fix this with some ''volume lock'' apps, but this thing keeps happening... The most annoying thing is that when the volume goes up or down, the mouse arrow dissapears, so I can't even do things in peace, I have to fight constantly with the invisible arrow, and the click also works whenever he wants... Please help me fix this!!
Is there a way to disable the volume hotkey or something, or just lock it, or hide that the volume is changing every time.. I don't know, something!!..
I will apreciate it very much.
Hope we can solve this together.
//////////////
They answer my mail by telling me to compile this 3 error log files
and attach them into this web, so...
Here, my 3 files to check whats going on...
Thanks!
LINK TO THE 3 LOG FILES:
https : // we.tl/7muywrOO5h
bomp
Hello !
1. I can not play HIT (Heroes of Incredible Tales)
2. I want to try Gaming toolkit so I install and open HIT, game update patch, intro run, HIT auto quit without any report.
3. Remix OS 3.0.206 ( Model number VPCEA36FM , Sony)
Ps: I do not know how to add attach files in go advance.
I succesfuly Install Nova 3 on my laptop and there is no problem in single player game but whenver i play multiplayer game online (there is no problem in Local wifi game) Firstly game work like butter but after i get killed game stuck(not responding also stuck play store) it stuck at respawning( sometime it play smoothly 2 to 3 spawning). The only way out of this quit game from taskbar or force quit. and when i try to reopen this game only black screen appears, the other game which work perfectly now shows also black screen.Only Way out off this restart laptop(Clearing cache force stop not working )
I attached all needed log files
Hope issue resolved in next version.
PS-last file in attachment is actually tar.gz
Stop "Detected game pad" on some games
I am using remix os for Laptop(Android x86)
as title suggest any way to disable game pad detection on some games.
Because my external keyboard detected as game pad and all on screen buttons gone.
So i cant map anything with mapper .
I search lot on google nothing find useful,
Any application that hidecertain hardware access to certain apps.
1. no wired network connection on msi h81i
2. auto or manual ip conf. does no help (wired adaptor works fine in Ubuntu)
3. The downloaded version is B2016110301 deb for LINUX TESTING
log files: bit.ly/2gkRvzP
Since update 3.0.207 we launched a new GitHub Feedback System & Troubleshooting Center
Post your issues and logs in there please.
when i use gaming toolkit while playing Heroes evolved the gamepad touching itself the setting in HE im using wasd button for joystick
I have just started playing scrabble on Windows 11 with the emulator LDPlayer.
At the moment I have to go to the playstore to open the scrabble app. Surely there a way of having a shortcut on the LDPlayer homerscreen? Have searched hard but can't find anything - anyone?
Also is there an adblocker that will work with this?
Install WSA ( Windows Subsystem for Android ) and run the game within it.
The app is supposed to appear in the homescreen after you install it. Clear disk cache from LD Player Settings > Advanced (located at bottom). Install the APK version, the shortccut should appear hopefully. If nothing works, you can always create a new instance. MEmu (memuplay) emulator lets you create desktop shortcut for apps installed in it, might wanna give it a try.
Lookeed into this a couple of times but I can see nowhere in the Bios where virtualisation is mention.
TheMaverick1953 said:
Lookeed into this a couple of times but I can see nowhere in the Bios where virtualisation is mention.
Click to expand...
Click to collapse
What's your motherboard model? In Asus board it's called SVM (Secure Virtualization Mode), or VMX. User manual should point it's existence at the end.
Belarc says:
Board: HP 8437 1.3
Serial Number: PGUCR0HP1B90LD
Bus Clock: 100 megahertz
UEFI: AMI F.53 10/23/2020
Please search thoroughly, it must be there somewhere. This guide might help -
HP PCs - Enable Virtualization Technology in the BIOS | HP® Customer Support
Learn how to enable or disable hardware virtualization technology on your computer in the BIOS. Virtualization Technology might be required for some features of Windows or other apps to work.
support.hp.com
Still no sign of virtualisation
attachment to above
The article says to look into security tab, can you provide an image of that?