is there anyway the hard spl and wm6.1 image could be hosted anywere else... rapid share doesnt work from my pc.. no image for the security
Related
Hi everyone, i'm looking for help again
This time, i've flashed to AKU PDAVIET and when i loaded (windows screen) the Upgrade.bat, the MS DOS command bugged after some time and now the S200 won't boot.
I just got the start menu with the version of ROM, EXT ... the wallpaper by Orange but it won't go any further.
I can't find any active sync connexion (hard reset does not help)
Does anyone know what to do to PLZ ?
go to the boatloader (reset while holding camera button) and try flashing again
THKS will try that tonight.
Now i remeber that i had do it with my Himalaya
did you downgrade to WM5 before flashing?
Nop i upgrade to AKU 2.2 and then i try to run the upgrade.bat wish work for a time...
Any solution to this one? I want to have the Dopod splash screen instead of the cloudy Qtek version. Is it possible?
im havin d same prob too...need to switch back from QTEK to DOPOD screen
READ ~~~~~
I hope that somebody can help
matthewchng said:
Any solution to this one? I want to have the Dopod splash screen instead of the cloudy Qtek version. Is it possible?
Click to expand...
Click to collapse
ok,u can change it but u must do some steps.
1/back up your data
2/download a origin rom from your PDA's website
3/flash it with this rom(don't extract this file,use *.exe)
4/flash it again with a rom,hard SPL,radio those u R using
5/restore your data
your splash screen will be change.i did it.my XDA neo splash was changed from O2 origin to O2 race (BMW)
What happened?
Probably you used a WM5.NVID RUU to prepare your device (Step1) for flashing another ROM.
The two startup screens (we call them splashscreens) are some specific picture-files that CAN be installed when a RUU is executed. The upgrade RUU's you find here don't bother with that, but the official vendors are very eager to have their own logo on yor device, so their RUU's contain a splashscreen section in the RUU. It does nothing more then change the startup picture.
So if you want to change back, it will only be cosmetic, there are no software changes whatsoever.
In this forumsection, there is a thread that offers a splashscreen-changer. So, if you can find the original dopod picture files, you can use that tool to chage only the startupscreens. If you have the original Dopod RUU, you could extract the splash-file.
thanks .. will find d splashscreen changer now...
If I rember correctly, user named Lastnikita develloped it. I think he posted in the general section as well.
matthewchng said:
Any solution to this one? I want to have the Dopod splash screen instead of the cloudy Qtek version. Is it possible?
Click to expand...
Click to collapse
1- extract nk.nbf from the ROM contains the splash you want using this tool and this command
Code:
typho5 nk.nbf -x
2- now use the tool nb2nbf like this:
Model ID: PM300
Language: WWE
oem version: leave blank
operator version: leave blank
CID: delte it, leave blank
only the file 92000000-Splash.nb and delete others like this: write or chose exatly like this
files 1: 92000000-Splash.nb, choose Splash Screen from image name the start address will become 92000000
3- press translate
4- flash the new nk.nbf with the NVID_Gx
cant seem to download from the link u've given..there's an error..
can pls give another link?
anyway does anyone has original DOPOD splash screen ??pls post thanks
d4rkfun3ral said:
cant seem to download from the link u've given..there's an error..
can pls give another link?
anyway does anyone has original DOPOD splash screen ??pls post thanks
Click to expand...
Click to collapse
Oh yes please. If anyone has it, please do share. If not, can someone who has the latest Official ROM for 818Pro, please upload to rapidshare. I can't get to the ROM download section because the HTC registration page don't seem to accept my device's serial number.
Thanks in advance.
the links work to me
download the latest Official ROM for 818Pro from dopod site, I have only I-mate and qtek splash
hope to say welcome in advance
Can someone try to extract the one from the following link that I found online that works. No idea if it is the latest version. I'm not at home now so haven't got access to my machine to try on this. Hope to hear the good news.
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Hi there, i have a situation that happened to my s200/G4 when i've tryed to update:
First i've updated IPL to 2.20 and it went ok showing on the device IPL 2.20.0001. Then when i've tryed to update SPL to 2.20 also and here the problem acoured. in the end it showed ok but when it rebooted it showed IPL 2020.0001 and SPL 2.20 and nothing else...... after this the s200 always stops at the bootloader screen. I'v tryed the hard reset, soft reset, latest i'v tryed the ppc charge trick(cut wires, etc...) i can even put the s200 discovered in the pc as a usb htc device(bootloader) but when i try to update to a new rom or anything the update program (always used g4 software and confirmed that it is a g4 ppc before update) it says that it can not communicate with the device....?!?!?
well, the device is showing in the device manager as a usb ppc device.
i don't know what to do more.
since he is connecting to the pc, how can i force him to accept any firm?
really this is a complicated situation to me since i am a beginner.
If anyone can help me please do. I would apreciate it.
Thanks
Hi nightRoller
I have the exact same problem, i've have started this thread looking for help and logging all the steps i've been doing with any success:
http://forum.xda-developers.com/showthread.php?t=357045
And like you, i also have my IPL 2.20.0001 and SLP 2.20 and i think that there's where the problem is
So lets see if any one can help us out, and keep me posted if you manage to do something, and i'll le you know if i succeed in the meantime.
Anyone would care to help uus out?
THank you very much in advance.
Cheers
Try Soft SPL
Instead of hard SPL, why don't you try just Soft SPL?
Search the Soft SPL thread, copy the 3 files to your Prophet root (\) dir and execute the SPL link, answer YES to the Program Executing Firewall if it pop up.
You'll need some WM5/6 to be able to operate the Prophet in order to do this, I went from the BootLoader directly to PDAViet Step 1 Temp WM5, after it ask me to tap the sreen to begin to use the device, I follow all the steps in order to have a WM operative, then use ActiveSync to Explore and copy Soft SPL to root dir.
After this, execute Soft SPL from your pocket, a blank screen will came. Press the Camera Button (Just in case), the Execute "ROMUpdateUtility_NV_G3.exe" or G4 equivalent from your nk.nbf preferred WM6 ROM.
Some time you'll have to unlplug the PDA and plug it again so the update to WM5 PDAViet Temp to begin without the "PDA not connected error", please, be advice that Activisync will be disable during this Bootloader stage, I mean, It will not sincro nor anything, but you'll still be able to update to Step 1 WM5.
You haven't actually done HardSPL right. Not an expert so I can't help you do it, there are guides on this forum though. But your IPL wont show 2.20.0001 ... it will have something with G4 in the middle. Sorry I can't be more specific, I only fixed this on my phone last night.
trying to upgrade my prophet, but cannot get the hard spl dos prog to do anything, i get ppc connected via activesync, run the prog, says initialising, but dosent do anything,
i have perviously upgraded using the old method with no problems, but cannot find the pdaviet file required.
i have a g4 device,
can any one help???
Hi to all,
I just took a unbuffered wiggler from my service man that i paid to make me one.
it looks like this http://www.testbox2.com/pliki/manuals/Solution/wiggler.gif
Is this a right cable?
So, i need a IPL and SPL to writte to my phone. It can turn on. First shows green screen, than white and then shows the 3-color screen. And a IPL is 1.00.15 and SPL is 1.00.84. After the bad format (the gsm calibrations) some guy (saxon13) told me that i need to put nb and spl and ipl through jtag. And i think that cid block is out too. So please i need help. need to know what else i need to put right sw in my hurricane and if someone have it, feel free to upload for me!
Thank you!
Is it possible that no one have it? Pls ppls, I just need that software, i have all equipment i need for JTAG flash!!!!
I found it! If anyone else need it, pp me to give you the link!
Please, give me your link with spl and ipl...thanks!
Try this link http://www.megaupload.com/?d=7CRGQP8P
this is SPL, Ruu software and unlock tools.
I found It on my Hdd (I had C550).
http://pda2u.ru/topic244s340.html?p=28642&#entry28642
here i found it... Just scroll the thread! And translate all!