Related
First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
SoftBank's known 3G/HSDPA flat-rate packet data connection setting that has hacked from old X01HT ExtROM (user name: "open", password started from "oz...") will be unusable on end of March.
The user name of new setting (available at current ROM that released on end of Nov. 2006) has changed as "opensoftbank", and still no one hacked the password itself.
However, finally I found a way to create the connetcion, using some files dumped from current X01HT ROM.
To create SoftBank's connection that can be used continuously after Apr. 1 2007, you need ROM COOKING as follows, because at least the file WIFIwake.exe should be in the ROM to make the connection.
Step 1. Cook your ROM (add following 2 files in attached ZIP) and update device.
For general instruction of Hermes' ROM cooking, see the Wiki and related resouces.
addfile Out.xml
addfile WIFIwake.exe(A.xml and Initial.exe aren't needed)
Step 2. Install ConnSBM.CAB (included in ZIP)
The connection will be created, however password entry is still empty at this moment.
Step 3. The files are in ROM, so you need to set to "Menu -> Show All Files" on File Explorer to make ROM-attributed files visible (or, use similar option for 3rd party's file explorers, such as Resco or GSFinder+).
Step 4. Run WIFIwake.exe from \Windows folder.
The password will be created into the connection made by ConnSBM.CAB at Step 2.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
If the password is not created, maybe WIFIwake.exe (non-ROM attributed) exists on \Windows. After running Initial.exe, WIFIwake.exe is copied onto storage from ROM. You need to delete it before retry, if you have run Initial.exe before install ConnSBM.CAB or lost setting.
BTW, I guess this way can be applied not only Hermes, but also Universal and/or any other HTC devices those can edit OS ROM (at least, I have successed on WM6 for Universal).
Enjoy AT YOUR OWN RISK !
Great work, a lot of japanese people was pursuing this for long time! Congratulations
Awesome, I had been doing this same thing for 3-4 days no and getting nowhere.
Mad props to you.
I have the Hermes and I'll be going to work as an engineer in Japan from April. I have installed the DoCoMo ROM for the moment (simply because out of the two ROMs, it's the one to have Bootloader 1.0.4, I have no trouble reading Japanese, and I need a Japanese input that's a bit more stable than Bagoj's IME).
However I'm wondering exactly what this thread would enable me to do... I'm planning on getting a subscription with either SoftBank or DoCoMo (whichever provides SIM cards/accepts to register a foreign phone).
If I get a SoftBank subscription, would this enable me to somehow cheat the subscription on getting more Internet for free? Or if that's wrong, what exactly would it enable me to get?
I haven't looked into the phone subscription system at the moment, but soon will. Whatever this thread exactly means could be a huge help in any choice I would have to make.
Many thanks for your help in advance,
Cheers,
Yannick
Hmm, I get the connection added but when I try to run the initial.exe from Windows is doesnt do anything. Using 3DES Custom.
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
mousey_ said:
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
Click to expand...
Click to collapse
I finally got the program to work. Funny thing is that I could nt cook a ROM with the initial.exe in it of it would not install. I was using the Rom Koch 0.99 release. So if I just copied the files over to a fresh install of a ROM it worked but I had to click initial.exe about 4-5 times before the "loading" graphic appeared.
I am assuming that it either installs a dll with the password encoded in it of he knows the password and didn't want it to become public. Initial.exe puts the connection password in the connection that ConnSBM.CAB creates.
Without the initial.exe running you have the connection with a blank password.
Files
Seeing as how none of these files are in the ROM itself is there any way you can post a list of file to help us re-create the process?
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Alcibiade said:
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Click to expand...
Click to collapse
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
This is wonderful news indeed! Now we only need a way to cook Japanese fonts and stable input into new ROMs and life would be perfect...
Great!
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
Every time I cooked the "addfiles" the initial.exe would not run properly and create the connection. If I cooked the other files minus the initial.exe and the cab it still wouldnt create the password. I could only get it to work by copying the files after flashing. Anybody get it to work in a cooked rom?
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Alcibiade said:
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Click to expand...
Click to collapse
@^#)(!^@$ MMS Lite doesnt work
More EASY way has been found!!!
Another Japanese SoftBank user has found more easier way to add the new SB connection.
Now you DON'T need any ROM cooking. Please move to new thread.
http://forum.xda-developers.com/showthread.php?p=1172318
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
posted here, OS also Japane,,どうだ！参ったか！
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
I am not sure to understand the "cook" the ROM... are you talking about the OS part? The Radio or the Extended rom ?
Cheers
help
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
ysi said:
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
Click to expand...
Click to collapse
after copy Out.xml & WIFImake.exe to /windows folder, click on WIFImake.exe then the passwd will be inserted there!
thanks for the mail but still i did not
may be some thing wrong with my rom
thanks
Well, up until now, I have just used DCD's ROM's without customizing then, but I thought I would give the kitchen a shot. So, I downloaded DCD's latest and greatest kitchen of v3.2.2, also downloaded the .Net 2.0 link EXE fil from his page and tried to install it (cause you need it to run the kitchen) but I get an error, says that it is "incompatible with the previously installed version of .net"
so, i tried uninstalling all my .net stuff in add/remove, rebooting, and installing this, and still wont let me. i tried windows update and updated to 3.5, had 1.1 and 2.0 downloads as well, and nothing will work.....net will not install at all, no matter what version.
so i cannot get the kitchen to run...help....?
:: Connor
did you restart the computer? after, did you delete the entire extracted folder of the kitchen and re-extract it? that always works for me.
Using DCD's (BuildOS) Kitchen with Vista
If you have UAC active on Vista here is what I suggest. If you are seeing issues with default.hv, user.hv, boot.hv most likely you have a permissions issue. Delete your extracted directories - Create a Root folder, such as Kitchen - Select Properties of that folder in Explorer - Go to the Security Tab and choose Edit - highlight your Users group and choose full control and then OK. Extract your kitchen files into this location. Logic would tell you that you should be able to just change the permissions on your folder once you extract it - UAC and logic don't necessarilly run together.... So once you've created a Root directory, set the security, extracted the kitchen into this location - run buildNB.bat as you would anything else - good luck.
The same issue applies to Vista and .Net errors (.Net 2.0 is default in Vista)
lol @ Vista...who uses Vista? hehe.
crobs808 said:
lol @ Vista...who uses Vista? hehe.
Click to expand...
Click to collapse
Was that really necessary? You are asking for help, and decide to bash controversial/fairly useful software in the same thread. Use your brain, kiddo!
I use Vista. Works great. I also have an XP desktop.
Heck I still have a notebook running windows 95 on it.
Whats it to you?
Was that really necessary? You are asking for help, and decide to bash controversial/fairly useful software in the same thread. Use your brain, kiddo!
Click to expand...
Click to collapse
Yeah this is the same kid who claims he is the only one that has nevo remote working, even though it doesn't work on EVERY other Titan. He's also the one that says he can magically send MMS messages without any software to do so. I'm starting to smell the bs from all the way here in Boston.
crobs808 said:
Well, up until now, I have just used DCD's ROM's without customizing then, but I thought I would give the kitchen a shot. So, I downloaded DCD's latest and greatest kitchen of v3.2.2, also downloaded the .Net 2.0 link EXE fil from his page and tried to install it (cause you need it to run the kitchen) but I get an error, says that it is "incompatible with the previously installed version of .net"
so, i tried uninstalling all my .net stuff in add/remove, rebooting, and installing this, and still wont let me. i tried windows update and updated to 3.5, had 1.1 and 2.0 downloads as well, and nothing will work.....net will not install at all, no matter what version.
so i cannot get the kitchen to run...help....?
:: Connor
Click to expand...
Click to collapse
tried getting a new computer?
coffey_joshua said:
tried getting a new computer?
Click to expand...
Click to collapse
If you read his blog, he actually sells (overpriced) computers. Once again, I think gc has properly diagnosed what's going on.
I have a similar problem with 3.2.0 but my screen is stuck on the vzw screen stuck ...is there anything I can do to fix this ?
thanks
gc14 said:
I'm starting to smell the bs from all the way here in Boston.
Click to expand...
Click to collapse
Whoa and that's saying a lot, given the way that bean town must smell; I mean they call it bean town for a reason, right ?!
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
gc14 said:
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
Click to expand...
Click to collapse
... and he knocked that one right over the center-field wall
gc14 said:
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
Click to expand...
Click to collapse
Now who's shoveling the bs.....
OH - wait, they kinda did spank my Lakers..... guess I'll go back to the corner now.....
No it is ok as Bean-town, only used as a verb. Still has the sports connotation, and can be used both offensively and defensively, and in all the sports Boston offers (Hockey, BB, Baseball, Football, etc).
Verb
To bean.
1. To hit with a projectile, accurately.
The pitcher beaned the batter, rather than letting him hit another home run.
I allreyd flashed a lot and did use a soft spl, but I do not find a proper
explanation what it is.
So, i Think it is the Bootloader ?
Can anyone tell me what a soft and a hard SPL is and does ?
For what do I need it ?
I just got my new Touch Pro bought in UK and now it is here in Germany and I want a german ROM on it as soon as it is available.
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threats
Greetings
Marcus
69reichertm said:
....So, i Think it is the Bootloader ?...
....Can anyone tell me what a soft and a hard SPL is and does ?....
Click to expand...
Click to collapse
Yep your right on that assumption sir The bootloader does alot of the low level handling of the startup process when you power on the device aswell as handling the process when you flash anything to the device...im sure its far more technical than that but thats a starter explanation Essentially you NEED a bootloader for the device to work at all, the case with many of the HTC devices...other devices are different most likely.
Soft SPL: (normally referred to as SSPL) IS loaded into RAM and allows you to perform some of the operations the standard bootloader would do, naturally with some extra functionality (explained later)
HardSPL: Same sort of thing except it is flashed to the device permenantly, so it replaces the HTC bootloader in your devices flash memory.
Both of these tend to safeguard against corrupting the device by having some fancy workarounds and updates to the processes built into the HTC SPL, and the best part is that they allow you to flash ANY ROM you wish therefor allowing us to use Cooked ROMs and various updates like radio updates and etc...frees the device up quite superbly.
69reichertm said:
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threads
Click to expand...
Click to collapse
Perhaps some mebers feel like adding a general HardSPL page to the wiki for FAQs like this to be answered better than "Search the forum.." since we know its not that good for finding anything.
The Wiki is there for everyone to use and edit so, learn and pass it on
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Hello !
Thank you for your advise.
One more question:
Should I install Hard or Soft SPL ?
I want to try out many ROMS - I think Hard is better, what do you mean ?
Thank you for your help
By the way:
I am a kind of technican - working in IT for nearly 18 years starting fron Novell, Banyan Vines and DOS up to Windows Vista. Also I am a kind of apple Guru, thats why I have certainly an iPhone 2G and 3G.
For business I use HTC devices sind the first MDA. But I lost track a little sind iPhone.
As I am a technic nerc I sstarted with th the Diamond touch again and I liked the device but i swapped this week to the touch pro because of the keyboard, SD Slot an flash light. I love this device.
By the way I also have the new Samsung Omnia 900 here and an unfun Nokia E71 ( I hate this old symbian - looks like last centuty )
So good night and thank you
Marcus
Jiggs1337 said:
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Click to expand...
Click to collapse
no, raphael hardspl is unsigned, means any rom is allowed, including HTC official roms.
69reichertm said:
One more question:
Should I install Hard or Soft SPL ?
Click to expand...
Click to collapse
you can only install hardspl. the job of soft spl is to install hardspl.
do not ever try any of the following:
- with SSPL, do not flash anything other than the included SPL NBH files. as extra protection the diamond and raphael SSPL's require htchacker sign (except the version jocky edited) and will reject anything that's not an SPL.
- and do not ever try to flash SSPL as an NBH, especially if it is a diamond or raphael.
Im sorry to disagree with your "don't tell me to use the Wiki".
But this is a fairly comprehensive answer to your question: http://wiki.xda-developers.com/index.php?pagename=SPL Questions? straight out the wiki.
Ta
Dave
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Jiggs1337 said:
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Click to expand...
Click to collapse
Yes - Everything Goes.
No.
Ta
Dave
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Jiggs1337 said:
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Click to expand...
Click to collapse
There are several things.
UC is short for User Customisation; it is in all the Kaiser ROM's nowadays. l3v5y's Raph ROMs also have it.
Links: l3v5y's ROMs & Main UC Thread.
I use UC to install programs, Provisioning XML (as part of UC) to change registry settings, my xcopyce application to copy folders and active sync to copy contacts, calender etc.
Ta
Dave
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Jiggs1337 said:
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Click to expand...
Click to collapse
I can't say. I haven't done it, what says you will lose all the info, the RUU or the thread? If it's the RUU, then you should be OK, it's probably the standard message that the proper RUU (used for carrier ROM upgrades) has.
UC is good, takes maybe an hour or two to get setup, but once done, you don't have to do it again and it makes flashing so much fun. I started with just installing CAB's and Copying files, then went onto ProvXML for my registry settings next. The latest version of Schap's Advanced Config (3.0) can export tweaks into a Prov XML file for you. It is worth it if you flash your ROM as often as I do.
Dave
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Jiggs1337 said:
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Click to expand...
Click to collapse
We are getting a little off topic of the OP now but...
Any tweaks done with schaps Advanced Config can be easiler exported using a "export" menu option.
If you export your registry after flashing, and again after you have all your settings setup right, you can Diff then using a Diff Program and copy the changes into your ProvXML file. Most PPC Regedit programs can export.
Any more on UC, I'd have a read of the UC thread and ask any questions in there. Myself and l3v5y keep and eye on it most of the time and should be able to help fairly quickly.
Ta
Dave
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Thank you for all the help - now lets start using the Touch - weekend is near
69reichertm said:
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Click to expand...
Click to collapse
lol, sure, there is only one package, and you simply click the EXE and it goes
http://forum.xda-developers.com/showthread.php?t=410150
Is it possible to use those backup softwares? Like Spb Backup for example that say "ROM Upgrade Mode — now it's possible to restore data after the ROM upgrade"? Instead of UC and such?
there is a IPL initial program loader (sort of bios)
a SPL secondary program loader (kinda like the ntloader)
and there is a service mode (3 color screen) (the flashprog)
then we have a RUU remote unit upgrader
mft masterfile table
mbr master boot record
and some other shizzle
the device switches the output of the internal usb when device is in 3 colorscreen to a service mode which allows it to overwrite the internal flashdrive .. pretty neat as what it actually does is switching to an internal flashprogrammer which programs the internal flashdrive. this is the same process as is used for your pc at home to update the bios.
the CID celloperator identification code (used for blocking certain rom upgrades)
enjoy..
Soft SPL quesiton
I have a SPV M700 and it's unlocked. I want to install Schaps rom. I have the folowing SPL version 1.07.000. I have't managed to install hard spl. Can I use soft spl to flash it? Can I permanently brake it?
ok....
here's the deal:
I've been using an OEM-package in mylast roms for tomtom version 7.915.
This has been working without troubles.
Now I cooked a new ROM based on new 21018 XIP/SYS
The device really flies and everything seems to working flawless....EXCEPT tomtom.
When I start Tomtom, in a flash I see the gray bootscreen but then immediately I get the error: 'Unable to start. Not enough memory is available.'
But I have more then 130mb program memory available so that can not be the issue....
I did not change anything to the OEM-package. So I guess it has something to do with the new SYS.
Do more people have this problem and/or does somebody now the fix....
Thnx all in advance for your help!!
Greetz Merten
p.s. I used the search function of course and saw a lot of similar errors but no sollutions.....
I am running TomTom 7.915.9196 (OK via a cab) on 21028.1.6.0 (just installed yesterday)
This is Da_G's simple kitchen plus the updated pack posted in that thread this morning.
Don't know if that helps, but I would be very interested in an OEM for TOMTOM if you can get it working?
crazyC said:
I am running TomTom 7.915.9196 (OK via a cab) on 21028.1.6.0 (just installed yesterday)
This is Da_G's simple kitchen plus the updated pack posted in that thread this morning.
Don't know if that helps, but I would be very interested in an OEM for TOMTOM if you can get it working?
Click to expand...
Click to collapse
I got the exact same oem-package working in M-rom v1.71!
So it really beats me why I get the error.
I tried cooking the rom again but still the error....
I am still cooking up my rom and so will reflash tonight - if you can post up your tomtom OEM I will take a look and try and flash it and see if I can get it to work? Maybe a conflict somewhere that might not be on mine as I do chaneg a number of the packages.
crazyC said:
I am still cooking up my rom and so will reflash tonight - if you can post up your tomtom OEM I will take a look and try and flash it and see if I can get it to work? Maybe a conflict somewhere that might not be on mine as I do chaneg a number of the packages.
Click to expand...
Click to collapse
Ok OEM can be found here in the map: packages
Package looks OK at first glance - hope to be able to try it tonight and will post back tomorrow with results.
If this doesn't work - you could try simply using the cab via UC etc as I do - I have checked and the cab of the same version in your OEM DOES work for me.
In fact, I think I might leave it in my UC, (but will flash tonight anyway with it just to see)
merten3000 said:
When I start Tomtom, in a flash I see the gray bootscreen but then immediately I get the error: 'Unable to start. Not enough memory is available.'
But I have more then 130mb program memory available so that can not be the issue....
Click to expand...
Click to collapse
I had the same problem some time ago, and it turned out to be SKtools automated Free-Ram shadow service that was causing this.
You dont happen to have similar software running (something that clears your RAM on the fly)?
GenghisZ said:
I had the same problem some time ago, and it turned out to be SKtools automated Free-Ram shadow service that was causing this.
You dont happen to have similar software running (something that clears your RAM on the fly)?
Click to expand...
Click to collapse
I tried new ervius packagetool: 5.3 and saw something about shadow service... will roll back to 4.3b1 and see if tool is the problem...
Thnx for the tip!
merten3000 said:
I tried new ervius packagetool: 5.3 and saw something about shadow service... will roll back to 4.3b1 and see if tool is the problem...
Thnx for the tip!
Click to expand...
Click to collapse
Nope, did not help...
OK - apart from the shortcut not being copied to programs - I didn't check the initflashfiles first - d'oh - it works.
I went to windows with file explorer and ran it from there - no problems.
Have flashed twice - it must be something else in your rom.
Does the page pool make any difference? or the filecache sizes?
crazyC said:
OK - apart from the shortcut not being copied to programs - I didn't check the initflashfiles first - d'oh - it works.
I went to windows with file explorer and ran it from there - no problems.
Have flashed twice - it must be something else in your rom.
Does the page pool make any difference? or the filecache sizes?
Click to expand...
Click to collapse
I always change my roms pp to 32mb...can that make a difference? I did it in v1.71 and tomtom worked fine...
I don't know - I have been around here long enough to know that your skills far outweigh mine. If it used to work then I see no reason for the change.
All I know is that my rom is based on Da_Gs really clean latest (ie 5.08) from his simple kitchen thread (from his post near the end not the first post) plus Eras2rs package updates.
The only other packages I add are a few utilities and personal tweaks. I import an advanced config xml as part of the UC process but that just ensures the various settings in Advanced Config are set to advised etc.
Hi,
I don't know if this can help but I got this same error message when the map isn't correctly activated.
Regards,
___________
TP - RomeOS 1.70
Harikoss said:
Hi,
I don't know if this can help but I got this same error message when the map isn't correctly activated.
Regards,
___________
TP - RomeOS 1.70
Click to expand...
Click to collapse
Maps work(ed) fine..
btw I bypassed the error by removing the OEM-package and made it a cab which is installed during system configuration. It takes more system space but this way it is uninstallable....but it remains a mistery to me why the OEM does not work in this SYS and does in 21014 SYS...