Hi i have a Cingular 8525 and ran cid unlocker and bootlogger 1.0. i tried to install just radio upgrade 1.34 and it gets to 95 percent and i get an error message (three times) tried hard reset and it continues to go back to the bootlogger mode.
ther is a 4 color screen
herm100
IPL-1.00
herm100 MFG
SPL-1.01
Did i brick the phone, i tried running bootlogger again to no avail.
thanks,
glenn
U may need install a special Bootloader 1.01 MFG!
Try understand this, should help !
In order to upgrade Radio Rom only - U will need >>
HERMES Bootloader 1.01 MFG
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
To install radio upgrades, you need Bootloader 1.04. 1.01MFG won't do radio images.
Upgrade to 1.04 and then flash again.
<sorry.. double post>
use mtty to upgrade your bootloader to 1.04, then re-flash
also, are you using the standard Hermes RUU to update? or the Magician MaUpgradeUt to upgrade the radio?
Try this. Boot to OS or if you can not boot then put in BL mode(tri color screen). Run this http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
You should have Radio 1.27 after that.
From the wiki on how to fix bricks:
connect via mtty
type: set 14 0
that worked for me.
I'm using Herm100 IPL-1.01 SPL-1.04. every time when I cannot actsyn. and exe RUU Warrpper, I got error (0xc000135) from PC. Also, I got no response from my softbank. Actually, what I want is to do HardSPL & then flash to WM6
I unbrick my htc p3600 with HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!! Can somebody create Hermes unbrick because when i use Hermes i always see message image corrupted because i not have activesync in my HERMES stack in logo only bootloader!!!!Cid locked!!! i can not intsall any rom hardspl...etc...try more then 50rom and all hardspl...all cid....now only see this http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl ??? Sory for my bad english please need help where is pof???
please read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
this not work because i ask to someone create Exploit???
this not work i try all i not have kitl mode , and can not use SSPL+ActiveSync because i stack in bootloader-no active sync my problem is to change bootloader when device is cid locked only solution to create Hermes overflow exloit and when i have temporaly cid unlock my device then i can flash rom.
Flash a cooked ROM, leave the device in bootloader mode, connect with USB....run the RUU and select your bootloader version.
The RUU shouldnt care that the device is already in bootloader mode, just follow the usual steps.
Explain me more because
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
How to jump spl address in hermes from dos??
Is any chance to jump spl to address in hermes or artemis from dos or mtty command what is spl address for hermes bootloader for artemis spl address is:.
* Kaiser Jump address is 0x00000000
* Artemis & Herald Jump address is 0x10000000
How to chenge bootloader in cid locked demaged
cid in hermes ???? HTC Trinity Stack Overflow exploit have this read in :
http://forum.xda-developers.com/showthread.php?t=308691
Who can explain and create for hermes?????
It's wierd!!!
there is no sign of POF and olipro!
I want to know where are they!!!
Maybe they are hired by HTC
Unbrick of Hermes IPL 1.04 SPL 2.03
mbsshop1302gsm said:
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
Click to expand...
Click to collapse
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
edyfast said:
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
Click to expand...
Click to collapse
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Tested! But DID NOT HELP!!!!!!!!!
8525 bricked IPL 1.04 spl 2.03 Solution
koorosh_bsboys said:
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Click to expand...
Click to collapse
Hi
It is a WM5 Rom, this is the only one I tried that worked at the first try!, however it seems at the beggining that wont work because it takes too much time to advance in the percentage bar on downloading, for me took about 35 minutes, the good notice is that this rom completes the installation and installs a WM5 but it is a good start since once you are done with this you can install hard spL on your phone, you mentioned that didn´t work please be patient if you notice that the percentage bar is working, at the end this will fix your phone.
where
can you sent me link to download or put in megaupload to try this rom please respond its very urgent to try.Sent me link to download??
And if my phone cid locked this will work or not???/
Unbrick 8525 IPL 1.04 SPL 2.03
Hi
here is the link:
http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship.exe
My phone was cid locked and KITL disable before I fixed it! now I did the unlocking using PoFs cid and sim unlocker and it worked fast and easy at the first try!
I understand your urgent requierement I was 15 days with my phone damaged with the only showing of IPL 1.04 and SPL 2.03 "serial" text on the bottom.
This Link Not No File Found
CAN YOU UPLOAD NEW LINK this link is dead :http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30 .00_108_Ship.exe
please use megaupload.....respond me please when you add new link.
THIS LINK is dead NO FILE FOUND
This will not work only solution to unbrick any Hermes stack in bootloader cid locked that somebody create Herems Stack Overflow exploit - ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl temporaly tehn we can flash any rom ???
Here is link for Trinity and work i unbrick my p3600 with this cid locked stack in bootloader:
http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes
Sory for my bad english please need help where is Pof to creat this for Hermes??Imei check and htc men help??
How to unbrick herm100 in tri-clour mode
download Mtty1_42.
CONNECT brick herm100 with usb
FROM the port setting,choose USB
A white page should open
TYPE set 14 0
TYPE set 16 0
soft reset with stylus.
HURRAY u are down.
dont 4get to say thanks
Hi all
I,ve got wizard with cid locked and stuck on bootloader IPL 2.26 SPL 1.03... i,ve tried everything to repair it, even rapair love rom...
do you think if if downgrade ipl to 1.03 it will help? the problem is that i don't have such a .nbf with the ipl 1.02
please help
Are you sure it is a G4? It shouldn't be even able to power on because the IPL and SPL version you provided is should not appear in G4!
Hello everyone.
I've problem while unlocking my Herm(MDA Vario II form Era). I downloaded Unlock_v3a prom forum. SPL updated succesfully to 1.40 Olipro byt while installing Radio it stuck on 0%. Then i have only bootloader screen and I install WM 6 wersion of operator (but without Radio etc because when i tried install full it stuck on 12% - radio install). Anyone have some idea what's wrong?
Maybe it is SPL case?
Thanks for replies!
Ok i want to refresh my Thread. I was reading many articles about Hermes and my case now is like that.
My Radio is working i can talking by PDA but only with cards of it's operator, when i'm trying install Radio installation stops on 0% i try to install 1.14, 1.18 Radio but always with the same result.
My IPL is 1.01
SPL is 1.40 Olipro
Radio ver. 1.05.02.00
Running on WM 6