Hi i have a Cingular 8525 and ran cid unlocker and bootlogger 1.0. i tried to install just radio upgrade 1.34 and it gets to 95 percent and i get an error message (three times) tried hard reset and it continues to go back to the bootlogger mode.
ther is a 4 color screen
herm100
IPL-1.00
herm100 MFG
SPL-1.01
Did i brick the phone, i tried running bootlogger again to no avail.
thanks,
glenn
U may need install a special Bootloader 1.01 MFG!
Try understand this, should help !
In order to upgrade Radio Rom only - U will need >>
HERMES Bootloader 1.01 MFG
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
To install radio upgrades, you need Bootloader 1.04. 1.01MFG won't do radio images.
Upgrade to 1.04 and then flash again.
<sorry.. double post>
use mtty to upgrade your bootloader to 1.04, then re-flash
also, are you using the standard Hermes RUU to update? or the Magician MaUpgradeUt to upgrade the radio?
Try this. Boot to OS or if you can not boot then put in BL mode(tri color screen). Run this http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
You should have Radio 1.27 after that.
From the wiki on how to fix bricks:
connect via mtty
type: set 14 0
that worked for me.
Related
Guys
I just got my TyTN (unlocked, stock TyTN, HERM200, HT636 series) yesterday. Device info as follows:
ROM version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ExtROM version: 1.18.255.106
I am on Cingular and in the Washington DC area.
I was trying to flash the Radio only to 1.16 because I am having issues connecting to the Cingular UMTS network, as per the wiki site (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms). Here's what happened:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error:
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
Click Exit to quit
(attached screenshot)
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Thankfully, the device started working properly after starting up.
Any thoughts regarding what's going on? Why was I not able to update my Radio?
I will really appreciate any help in this regards.
JoKer
tried to run the upgrade twice when you get the error? without disconnecting the device from usb...
No pof ... I haven't .. I disconnected it before restarting it. What exactly should I do this time?
gravejoker said:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error: ERROR 120: COUNTRY ID ERROR
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Click to expand...
Click to collapse
Everything ok until "d", don't do "e". Go to "a" again.
I followed all of above steps with my stock TyTN. Fired up the upgrade again after the country ID error, I get the white screen indicating a radio upgrade is being performed. After a while I get the 114 error, I reset the TyTN but the radio is still 1.03. Anything else I need to consider?
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
pof said:
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
Click to expand...
Click to collapse
Ok, I have 1.06 bootloader. I was interested in a newer radio ROM to figure out whether my old ROM prevents me from having a simultaneous voice/data connection...
Any suggestions what to do next?
Flash a ROM matching your CID with bootloader 1.04.
Read this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
Using XP, I am trying to upgrade from radio 1.16.00.00 to radio 1.20.31.10. I have followed the instructions in the Hermes Upgrade Guide to the letter. I have tried sever times, but I continue to get ERROR 114. Each time the phone says "Upgrade Radio Stack Please Wait..." and the upgrading process never moves from 0% on the desktop (yes, I closed process wcescomm.exe before starting.) I have also tried doing another upgrade right after the error 114 message, without disconnecting the phone nor reseting, but I get ERROR 150.
Any ideas would be helpful.
Ron
Current Setup:
ROM: 1.34.502.1 Cingular
Radio: 1.16.00.00
BL: 1.04
Task 32: 0
History:
1) Phone came loaded with Cingular ROM 1.34
2) Downgraded to Cingular ROM 1.30 to get BL1.04
3) SuperCID unlock automatically with HTC_Hermes_SIM_CID_Unlock_v3 (GREAT PROGRAM!!!)
4) Used SSPL-HERM.exe to change ROM back to Cingular 1.34
5) UNSUCCESSFULLY tried to upgrade Radio Version to 1.20
Well, I was doing everything right... but my computer was refusing to cooperate with me. Because I did the exact same thing on my wifes computer and it worked!!!
Thanks
Ron
Hi guys,
I have an unlocked MDA vario II, which I unlocked it by myself using the CID unlocker 3a. After the procedure which was succesful, the SPL of my PDA changed to these:
HERM 300
IPL-1.01
HERM300
SPL-1.40 Olipro
I tried to upgrade the SPL with the new HARD SPL v7
and I am getting the error 269 when I am using the RUU wrapper.
What is the problem ?
will I be able to install new roms with my current SPL ?
(sorry for this post but I dont have enough time to read arround 100+ threads in order to find assistance)
Hello everyone.
I've problem while unlocking my Herm(MDA Vario II form Era). I downloaded Unlock_v3a prom forum. SPL updated succesfully to 1.40 Olipro byt while installing Radio it stuck on 0%. Then i have only bootloader screen and I install WM 6 wersion of operator (but without Radio etc because when i tried install full it stuck on 12% - radio install). Anyone have some idea what's wrong?
Maybe it is SPL case?
Thanks for replies!
Ok i want to refresh my Thread. I was reading many articles about Hermes and my case now is like that.
My Radio is working i can talking by PDA but only with cards of it's operator, when i'm trying install Radio installation stops on 0% i try to install 1.14, 1.18 Radio but always with the same result.
My IPL is 1.01
SPL is 1.40 Olipro
Radio ver. 1.05.02.00
Running on WM 6
How do I update hardSPL to a new version? i currently have 1.16 and want to upgrade too 1.22
i tried using somthing called uspl but that didnt help it still says SPL 1.16 Hard on the bootloader
I have a HTC Touch Dual (Orange Branded - NIKI100)
That's not really difficult : just flash th 1.22 the same way you flashed the old one !
Launch the SSPL on your phone : you'll have the tricolor screen.
Plug it using your USB cable, and launch the RUU with the harsSPL NBH.
Antubis said:
That's not really difficult : just flash th 1.22 the same way you flashed the old one !
Launch the SSPL on your phone : you'll have the tricolor screen.
Plug it using your USB cable, and launch the RUU with the harsSPL NBH.
Click to expand...
Click to collapse
Thankyou! I been waiting all day for that!
HardSPL 1.22
HERE yuo can find the last HardSPL 1.22 lost in a too long thread...
Thank rling to have helped me to find it!
I have been rying to change it but it still shows:
NIKI100 MFG
SPL-1.15.Hard
CPLD-4
The "sspl-1.16-nike.exe" (the kemit icon, when on the phone) must be on the phone and executed from the phone itself (gives the tri-color screen). after that you can start the 1.22 exe from your PC and flash the spl as described.
Don't forget to backup first, remove storagecard and SIM before doing all this.