Cannot upgrade RadioROM with BL 1.04 - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Using XP, I am trying to upgrade from radio 1.16.00.00 to radio 1.20.31.10. I have followed the instructions in the Hermes Upgrade Guide to the letter. I have tried sever times, but I continue to get ERROR 114. Each time the phone says "Upgrade Radio Stack Please Wait..." and the upgrading process never moves from 0% on the desktop (yes, I closed process wcescomm.exe before starting.) I have also tried doing another upgrade right after the error 114 message, without disconnecting the phone nor reseting, but I get ERROR 150.
Any ideas would be helpful.
Ron
Current Setup:
ROM: 1.34.502.1 Cingular
Radio: 1.16.00.00
BL: 1.04
Task 32: 0
History:
1) Phone came loaded with Cingular ROM 1.34
2) Downgraded to Cingular ROM 1.30 to get BL1.04
3) SuperCID unlock automatically with HTC_Hermes_SIM_CID_Unlock_v3 (GREAT PROGRAM!!!)
4) Used SSPL-HERM.exe to change ROM back to Cingular 1.34
5) UNSUCCESSFULLY tried to upgrade Radio Version to 1.20

Well, I was doing everything right... but my computer was refusing to cooperate with me. Because I did the exact same thing on my wifes computer and it worked!!!
Thanks
Ron

Related

HELP | Unable to upgrade Radio to 1.16 on the new TyTN

Guys
I just got my TyTN (unlocked, stock TyTN, HERM200, HT636 series) yesterday. Device info as follows:
ROM version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ExtROM version: 1.18.255.106
I am on Cingular and in the Washington DC area.
I was trying to flash the Radio only to 1.16 because I am having issues connecting to the Cingular UMTS network, as per the wiki site (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms). Here's what happened:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error:
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
Click Exit to quit
(attached screenshot)
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Thankfully, the device started working properly after starting up.
Any thoughts regarding what's going on? Why was I not able to update my Radio?
I will really appreciate any help in this regards.
JoKer
tried to run the upgrade twice when you get the error? without disconnecting the device from usb...
No pof ... I haven't .. I disconnected it before restarting it. What exactly should I do this time?
gravejoker said:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error: ERROR 120: COUNTRY ID ERROR
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Click to expand...
Click to collapse
Everything ok until "d", don't do "e". Go to "a" again.
I followed all of above steps with my stock TyTN. Fired up the upgrade again after the country ID error, I get the white screen indicating a radio upgrade is being performed. After a while I get the 114 error, I reset the TyTN but the radio is still 1.03. Anything else I need to consider?
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
pof said:
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
Click to expand...
Click to collapse
Ok, I have 1.06 bootloader. I was interested in a newer radio ROM to figure out whether my old ROM prevents me from having a simultaneous voice/data connection...
Any suggestions what to do next?
Flash a ROM matching your CID with bootloader 1.04.
Read this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104

yet another SuperCID thread (sorry)

Alright, so im trying to superCID my Dopod 838 Pro. I've read the wiki and all the threads that i can find, and everything seems to go according to plan. Except i cannot verify SuperCID status.
I downloaded pofs http://pof.eslack.org/hermes-unlocker/
I flashed the radio, and received the "Upgrade Error 114" as expected.
I then ran HERM_Unlock_v2a.exe on the device, and after a minute i get a "Your device was SUCCESSFULLY unlocked and changed to SuperCID." message.
From mtty (after booting the device into the bootloader) i get the following results from the suggested commands.
USB>task 32
Level = FF
USB>info 2
HTCSDOPOD001Û<wHTCEUSB>
From what i understand, my device is still CIDlocked.
I want to make sure that superCID is enabled before i go flashing the ROM.
I've gone back and reread the instructions and repeated this procedure three times now.
Any suggestions as to what i might be doing wrong?
In the bootloader i see the following:
HERM100
IPL-1.01
SPL-1.04
thanks/Richard.
What radio version do you have currently installed? When you run the downgrade to radio 1.16 (attached to the unlock v2a) and get a error 114 you have to rerun it till the red progress bar appears and the radio is flashed to 1.16. Only then can you run superCID.
I have radio version: 1.06.00.10 installed.
Other versions are:
ROM Version: 1.23.707.4
ROM date : 07/21/06
Protocol version: 32.37.7010.01H
I see. Is the red bar to appear on the computer or the device? I received error 114 every time.
edit: when updating i see "Upgrade. Radio Stack. Please wait..." on the device. This message doesnt go away, even after error 114 , until i soft reset the device.
I've rerun it now an additional 5 times. I get no red bar.
Also, it wouldn't be a downgrade of the radio, as im trying to go from 1.06 to 1.16, but im not sure thats relevant.
does nobody have any insight to share?
littlenarf said:
does nobody have any insight to share?
Click to expand...
Click to collapse
I see you tried the unlocker v2a, have you tried the new version 3...just a thought.

radio upgrade stuck in bootlegger

Hi i have a Cingular 8525 and ran cid unlocker and bootlogger 1.0. i tried to install just radio upgrade 1.34 and it gets to 95 percent and i get an error message (three times) tried hard reset and it continues to go back to the bootlogger mode.
ther is a 4 color screen
herm100
IPL-1.00
herm100 MFG
SPL-1.01
Did i brick the phone, i tried running bootlogger again to no avail.
thanks,
glenn
U may need install a special Bootloader 1.01 MFG!
Try understand this, should help !
In order to upgrade Radio Rom only - U will need >>
HERMES Bootloader 1.01 MFG
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
To install radio upgrades, you need Bootloader 1.04. 1.01MFG won't do radio images.
Upgrade to 1.04 and then flash again.
<sorry.. double post>
use mtty to upgrade your bootloader to 1.04, then re-flash
also, are you using the standard Hermes RUU to update? or the Magician MaUpgradeUt to upgrade the radio?
Try this. Boot to OS or if you can not boot then put in BL mode(tri color screen). Run this http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
You should have Radio 1.27 after that.
From the wiki on how to fix bricks:
connect via mtty
type: set 14 0
that worked for me.

I cannot upgrade my Radio ROM

Hy at all,
I have one MSPV M3100 and i upgrate this to WM6 Xda-Live 0.20.1 ROM. This rom woek perfectly but my telephone run very bad.
Y have this version:
ROM: WM6 Xda-Live 0.20.1
Radio ROM: 1.16.0.0
Bootloader: SPL 1.06
I want upgrade my Radio Rom to 1.27 version, but not it with himself. I have tried 4 times, and always the same error. ERROR 114= Upgrade error.
I have followed these instructions:
Upgrade instructions
1. Extract the contents of the compressed file you've just downloaded
2.Run MaUpgradeUt_noID.exe
Description for Radio 1.11 shows ver 0.70, but don't worry about it, it is really 1.11
3. The Hermes screen will turn white and show "Upgrade Radio Stack Please wait........."
4. If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
5. The upgrading process will start and MaUpgradeUt_noID.exe will end up saying "ERROR 114: Upgrade Error", but the radio ROM will be flashed anyway, don't worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
that I have done badly?
as I have it to do?
Sorry for my english, is very bad.
Thanks a lot of for your answers.
By.
You need to prep the bootloader. I will go find the link.
Here is the wiki link. This should get you started. I am in the process of downgrading from 1.35 to 1.27 right now. lol
I have the Oliman 1.10 and ipl is 1.01. Search for hard spl and you will have it all.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Before you flash the radio it is a good idea to use Hard-SPL so if the flash goes wrong the phone can be recovered.
pardon, but what is Hard SPL??
Is a program??
how I prepare the bootloader??
thanks
You Need to use SSPL. Look for Radio Files with SSPL in the WIKI.
Hello,
I must make downgrade to a ROM with the version SPL 1.04 to be able to
change to my radius ROM?
That is what me say?
Thanks.
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
LegolasTheElf said:
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
Click to expand...
Click to collapse
Hello,
Pardon. It does not form well my profile. I have two mobile. One Hp 6815 with Movistar and one SPV M3100 with Orange.
Pardons but I do not understand.
How I can obtain superCID?
I want to put the RADIO ROM 1.27.0.0 SSPL that this here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
What I must do first?
Downgrade to a ROM with SPL 1.04 or Change to SuperCID.
Thanks for reply.
By.
Hey Meodio_99, sorry but you are a classical case of someone who is going to end up with a bricked (dead) phone. You have a disadvantage as your English does not appear to be very good but you need to both read AND understand otherwise sooner or later you will end up with a bricked phone.
I suggest you read all the WIKI sections talking about upgrading and also http://forum.xda-developers.com/showthread.php?t=296722 and http://forum.xda-developers.com/showthread.php?t=286755
It might take you an hour or so but it might also prevent you from crying yourself to sleep at night because you killed your Hermes!

Problem while Unlocking

Hello everyone.
I've problem while unlocking my Herm(MDA Vario II form Era). I downloaded Unlock_v3a prom forum. SPL updated succesfully to 1.40 Olipro byt while installing Radio it stuck on 0%. Then i have only bootloader screen and I install WM 6 wersion of operator (but without Radio etc because when i tried install full it stuck on 12% - radio install). Anyone have some idea what's wrong?
Maybe it is SPL case?
Thanks for replies!
Ok i want to refresh my Thread. I was reading many articles about Hermes and my case now is like that.
My Radio is working i can talking by PDA but only with cards of it's operator, when i'm trying install Radio installation stops on 0% i try to install 1.14, 1.18 Radio but always with the same result.
My IPL is 1.01
SPL is 1.40 Olipro
Radio ver. 1.05.02.00
Running on WM 6

Categories

Resources