i have read n search from this forum for this problem but not at my real point.
i have done flashing my X01HT softbank with this thread
but the rom ver. JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
i use NBHtool to make my own
1.IPL.nb,SPL.nd and RAdio rom i take from HTC_Hermes_SIM_CID_Unlock_v3a (HermesUnlocker_v3a.nbh)
2. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom(i used up there)
3.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10)
(Or is that i make a wrong?)
all look normal after flashing (the signal show up and all the program) but the problem is i can not still make a call.
The reason i flash it was the original in japanese and it was lock (asking password like that). I don't know japanese at all.
Oh ya,i'm from Indonesia,before this problem appear i use it normal with my gsm card (My region card)
I dont why a few week ago this problem came by him self.
Note: I haven't ever flash it before yet.
so this is the 1st time.
The radio rom before flash still ver.1.14.00.10
after flash (u know lah ver.1.16.00.00 --> HermesUnlocker_v3a)
can anyone help me?
ups i'm forgot
from this thread http://forum.xda-developers.com/showthread.php?t=281617&highlight=X01HT+rom+english+version
Or this is the other lock mode?
the first lock i have got was asking a password bar screen.
but sometimes u could see the desktop but only 2-10 sec appear then screen lock with password again.
after flash,hadn't shown that.very normal.The signal appear normally.
but i just couldn't make a call.
it said "operation fail" or
"can't complete the call.The signal maybe unaviable or the phone number maybe not valid.Verify the number or try again later".
and so was like that if i sent a sms.
just that.So...can i say that still lock?
How to solve that?
DONE. horeeeeee.....Success,i did it!!!!
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
Make a question n answer it by my self....hahahaha.....
Just for share expreriance bro....
wuahhh lucky you
i have two x01ht one before and the other one post April
unlocked one but another one still cant unlock
pls contact me if you have any idea to unlock it
want to try imei check
but paypal is just pain in the ass
especially for indonesian like us
learnig said:
Note: I haven't ever flash it before yet.
so this is the 1st time.
The radio rom before flash still ver.1.14.00.10
after flash (u know lah ver.1.16.00.00 --> HermesUnlocker_v3a)
Click to expand...
Click to collapse
i just expreriance softbank x01ht the radio rom 1.14.00.10 (before run HermesUnlocker_V3a). and after run HermesUnlocker_V3a the radio rom changed to 1.16.00.00.
Unlocked done!!! Thanks Pof.
But the problem is... i bought another x01ht with radio rom 1.46, how to change to radio rom 1.14 or 1.16? i want to change the radio rom to 1.14 or 1.16 because i think with radio rom 1.14 we can unlock x01ht with HermesUnlocker_V3a.
does anyone know where i can download radio rom 1.14 and 1.16?
i was tried to searching in forum and i got it, but when i installed the radio rom can not be changed from 1.46 to 1.14 or 1.16
thanks and regards,
b.
Related
i could hack Radio rom from Cinglar,and make Flashable file.
2 of them,,Version 1.10 and 1.16 were tested on my VarioII.
i tried to upload them onto xda-FTP many times but fialed.
so i uploaded to my FTP for you guys.
instruction of upgrade also there.
Please got to get them if you interested in.
http://asukal.net/blog/2006/09/radio_upgrade_hermes_form_cing.html
Good luck
Asukaly yours!
WTF! This is _VERY_ good news!! :shock:
How did you manage to cook the type 2 radio rom??
Is Ma_Upgrade_NoID working with the hermes bootloader?? AFAIK the bootloader lacks wdata command... (replaced by 'wdatah')
Is it that you need only rwdata but not wdata to flash radio?
An explanation of the process to create the working nbf out of the extracted .nb files would be very useful!
Thanks!!
EDIT: I uploaded the files to xda-dev FTP and make a new wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thanks for the new Radio update. Just updated my MDA Vario II. Will test if there's any improvements!
Seems to work like a charm!
ROM 1.18.255.3
ROM date: 07/22/06
Protocol version: 32.53.7018.01H
Ext ROM 1.18.255.106
Radio 1.16.00.00
And my Bootloader remains at V1.04 :!:
(I'd have pasted a bitmap, but I couldn't figure out how!).
Major kudos to Asukal!!!!!!!
Now if we could only find a new TyTN System ROM to go along with this spiffy new radio...
super Asukal, great news!!!
about the screen alignment problem, if you have some free time, could you please translate whats is the problem and how they do to fix the screen alignment problem please
http://inuchanbt.blog54.fc2.com/blog-entry-86.html
thanks you so much Asukal!
I am receiving country id error : 120 while attempting to upgrade the radio from Cingular 1.31 ( radio 1.13). Even when i ran the upgrade second time device seems to go into radio update screen but just sits there and doing nothing.
then the radio updare error comes up. following the soft reset I have checked device information and radio version is still: 1.13
device is HTC TyTN, originally shipped with Italian ROM.
any ideas?
@superduper: I guess you need a 1.04 bootloader to perform the radio only rom upgrade from Asukal, but your current rom has bootloader 1.06
Let's see if anyone else with Cingular 1.31 rom can do the radio only upgrade or has the same problem you reported...
@Asukal: please give us details on how you did to extract the "radio_.nbf" from shipped Hermimg Cingular NBH file
this is super excellent. Now all we need is a rom image update then we can make our own aku 3.2 version.
Good job Asukal.
vua777 said:
super Asukal, great news!!!
about the screen alignment problem, if you have some free time, could you please translate whats is the problem and how they do to fix the screen alignment problem please
http://inuchanbt.blog54.fc2.com/blog-entry-86.html
thanks you so much Asukal!
Click to expand...
Click to collapse
he did ...pls see a picture
Summary to extract and convert nbh, pls wait a while.
i will make report after finish all my project of this,
now i am trying to flash Only Splash, and only OS, only Extrom separately.
PLS patient!
and thanks report guys!.
if no_id_upgrade can not work on Bootloader 1.06,
can u try with Hermes Upgrade.exe with this nbf?
(you must remove nbh before that, i didnt try that so i am not sure it work or not) :?
thanks a lot Asukal!!!
no luck. file open error : 240 :?
Asukal said:
if no_id_upgrade can not work on Bootloader 1.06,
can u try with Hermes Upgrade.exe with this nbf?
(you must remove nbh before that, i didnt try that so i am not sure it work or not) :?
Click to expand...
Click to collapse
Is it any better?
So, a question for those of you who've done the upgrade - does it make any difference you can notice? Just wondering if it's worth doing the upgrade at the moment, or waiting for new HTC rom when it finally appears.
Tried this on a Orange M3100 with the 1.31 Cingular ROM, but it doesn work. Just sites at 0% and then you eventually get an error. Seems like you need bootloader 1.04 for this to work...
are there any improvements using these new radio roms? also, what's the difference between 1.10 and 1.16?
thanks
I wasn't having any radio problems previously, and so far, I haven't seen any issues with 1.16, either.
Bluetooth works fine, UMTS/GSM calls work fine, WLAN works fine, and UMTS data works fine...
If I see any strange behaviors, I'll be sure to point them out...
Asukal said:
Summary to extract and convert nbh, pls wait a while.
i will make report after finish all my project of this,
now i am trying to flash Only Splash, and only OS, only Extrom separately.
PLS patient!
Click to expand...
Click to collapse
Aaaaghhh! I can't wait
Please tell me if this process is correct to create the radio_.nbf:
Code:
nbh2dbh.pl HERMIMG.nbh HERMIMG.dbh
dbhdecode.pl HERMIMG.dbh
alpinenbfdecode.pl -e ./GSM.nb radio_.nbf
My radio_.nbf and yours differ, is it because of headers?
Thanks!
Just tried the procedure on mine.
Hardware = Dopod 838Pro
ROM = imate
Upgraded to radio version 1.16, the procedure worked fine! Except that after the flashing was complete the PC displayed "upgrade failed" but after a soft reset of the PDA, it worked.
You did a great job, Asukal!!!
I can see some improvement that I can see more wireless bar on my title bar after I upgrade radio ROM.
Thsi is cingular ROM, so I don't know somebody who lives outside US can see this improvement, but I can see it in my rural US state.
In addition, as you said, I can see OS runs smoothly than my original ROM.
I was usually stuck when I run "menu" or "button" applet in control panet. But after I upgrade to Radio 1.16, I don't have it.
I don't know why, but it is real.
I appreciate your effot!!
works great, thanks..
guys who can not flash Radio
One of my friends try to flash 1.16.and faild in that.
But could flash 1.11.
then tried 1.16 again, finally he could flash 1.16.
Please try this step.<this is not to guarantee can do, just a possibility>
And i will prepare 1.13 also soon.
Ok... now this is going to be a work in progress and an answer to most questions...
To all pof, Des and Sleuth have done a great job in getting the tools together so we can flash our devices...
1. To all who want to SuperCID your device no matter what ROM version you have and no matter what Radio BootLoader version you have you can use POF's version 3 unlocker found here http://pof.eslack.org/hermes-unlocker/
2. Once you have SuperCID your device you can now load extracted ExtRom, OS, and radio roms (radio can only be done if you have radio bootloader 107 or less) to do this goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
3. For all of those not interested in ROM cooking and flashing cooked ExtROM's all you need to use is des's SSPL tool... just copy it onto your device and run it... the SPL version should say SPL-1.09.des. The tool can be found here http://forum.xda-developers.com/showthread.php?t=293651
4. Just to clarify... once you have flashed radio bootloader 108 onto your device it is possible to do Extracted Radio only upgrades please read edit 3 below..... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
5. if your device is unusable please refer to here http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
appologies for all the links but thats what the wiki is for guys... lots of reading but it is all worth while in the end...
and if ive missed anything feel free to add...
edit 1... The reason you SuperCID your device is to enable flashing of any SPL Bootloader versions, extracted OS roms, extracted ExtROM's and to an extent Radio ROM's (only if your device has RadioBootloader 107 or less).... but SuperCIDing your device voids the warranty... if your just looking to upgrade your device to a newer ROM and are worried about the warranty just use des's SSPL tool... read point 3 above...
edit 2... the SSPL tool... you need to copy this onto your device while windows mobile is running... if your device is not in a usable state refer to point 5... once its finished copying click on the exe and run it... it will put your device into a 'Service' mode and with bootloader versions IPL-SSPL by Des and SPL-1.09.ds... all you need to do now is choose which shipped original rom you want to use to flash your device with... see here for options http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Dead Tytn
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
jash431 said:
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
Click to expand...
Click to collapse
you need to boot it into Windows Mobile... can you do this?
walshieau said:
you need to boot it into Windows Mobile... can you do this?
Click to expand...
Click to collapse
I thought step 5 covered this.
wpbear said:
I thought step 5 covered this.
Click to expand...
Click to collapse
but he didnt read step 5... i hadnt added that bit yet
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Please Answer if you are sure
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ME TOO...
IF have one NEW VERSION with "SSPL",use Micro sd /RUU ,maybe can help me and you to reflash it ...
walshieau
BIG THANKZzz for this information...
simple said:
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Click to expand...
Click to collapse
1. If you have radio bootloader 108 you cannot downgrade it...
2. Yes its true but that still wont downgrade your radio bootloader.. it will just downgrade your radio, os and extended rom
3. yes that is correct
4. current limitations read this... http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ok now you have to open an mtty session... download this ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
1. Disable 'Allow USB Connections' in Activesync
2. Open mtty.exe
3. type \\.\WCEUSBSH001 in the port section and click ok
4. press 'Enter' twice and type task 32 and press enter
4. type info 2 and tell me what is displayed...
What about writing an app which fully identifies all Hermes specs? It should open a message box and answer whether device is SuperCID, which IPL, SPL, RBL, ROM, Radio and if readable which ExtROM. Wouldn't that be nice? Every noob could give all the information viable for all others to help.
well if the user was to go and look at the device information application in 'Settings' > System then can find out what radio rom version they have when in turn if they look at the table in the wiki they can tell what version of Radio Bootloader they have... but i will investigate writing a little app... shouldnt be too hard...
walshieau said:
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Click to expand...
Click to collapse
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
wpbear said:
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
Click to expand...
Click to collapse
1. i havent tried that... what is the point??
2. yes that is correct...
dead tytn jash431
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
jash431 said:
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
Click to expand...
Click to collapse
check your pm
Hi Walshieau,
After I follow your edit 3 step, when I try to upgrade the radio,
it shown Error 262. What's that error message for?
Thanks
did you copy SSPL to your device and run it before you started the upgrade???
Am I right in thinking I could mix and match all the components with this tool?
I.E. extract the o.s. from one full update then extract the radio from another, then use "NBF generator" to merge them and flash them all at once?
HTC Wizard SoftSPL (sSPL) For G4 Wizards
FAQ:
What is SoftSPL?
-SoftSPL is a patched SPL that will temporary unlock your CID (untill reboot).
-It will be copied to your device and loaded (BUT NOT FLASHED!), the device is tricked to believe it has SuperCID (More accuratly g_cKeyCardSecurityLevel will be 0 ).
Why Temporary?
-1st because of warranty, since there is no CID block written, warranty isn't void
-2nd with this tool it's not necesarry to have a permanently unlocked CID.
-3rd it's safe, it doesn't flash CID block or IPL/SPL by it's own, but choose your ROM you want to flash wisely!
Isn't shelltool the same?
-no shelltool will strip the rom, and then flash it with pdocwrite, where sSPL is a bootloader which says it has supercid, thus tricking the RomUpdateUtility.
But can I make it permanent?
-Yes it can make it semi permanent, with HardSPL (it's the same trick, but now a patched SPL is flashed to device).
What does Soft SPL change on my device?
-nothing, it's loaded into memory. Only the ROM you choose to flash with the RUU will change your device.
USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip
G4 Safe means:
-No IPL/SPL and no Extended ROM.
Many Thanks Go to:
Olipro: For patching the latest SPL
SAA044: For testing all the versions, and keeping his head cool when the first hardSPL killed his Wizard (beyond repair!), and for keeping on testing the new versions with his brand new Wizard!
Whiterat: For all his technical and moral support, without him it wouldn't have excisted.
Pof & Des: From whom I took the idea, and some of the scripts.
NB. This sSPL is not for G3, it will proceed with updating, but in the end OS will not be written, tested it with my own G3. Beware of the SPL/IPL (there is danger to flash G4 spl on your G3 due to the fact you are using a G4 sSPL, the RUU will probably think it's running from a G4 device!).
NB.2 If you want to mtty in stead of flashing a ROM, place mtty in the folder and rename it 2.exe
[EDIT:12-september 19:54] I updated the file for a confirmed working RC1 (v0.1) WITH the missing dll [/EDIT]
[edit] 23.09.07
Some people reported that enable rapi does not always work, if that is the case for you, you can try to replace the original enable-rapi with the one attached here.
[/edit]
Well Done Eqx and Well Done to everybody else involved.
I look forward to giving this a go.
This is great work.. I will try this first thing in the morning..
Many Thanks
First of all many thanks for ur effort.
second-should i back to the love room befor flashing this room or i can flash directly from any room?
third - with shell tool if any problems happend i can back to love room and retry again. is it possible here also?
forth - is soft room = new room without spl & ipl?
awaiting ur reply & thanks again for ur hard work
First of all many thanks for ur effort.
second-should i back to the love room befor flashing this room or i can flash directly from any ROM?
third - with shell tool if any problems happend i can back to love room and retry again. is it possible here also?
forth - is soft (safe?) ROM = new ROM without spl & ipl?
awaiting ur reply & thanks again for ur hard work
Click to expand...
Click to collapse
First, you're welcome.
2nd Please keep in mind you need IPL/SPL 2.xx.00001 for WM6 (use the latest officcial one from your provider)
3rd It's not different from an ordinary flash, you can go back to any ROM that is G4 safe.
4rd G4 safe means no IPL/SPL (Extended ROM hasn't been tested yet)
Thanks bro
thanks bro for ur quick reply & i will try it as soon as TNT5 release.(inshaa-allah)
it's sound pretty easy ... i'mma try it 2marow as well .
thanks for everything
where r u guys?
42 person's were downloded without any comments. your feedback is very important to other's.
yalla come on
[solution] G4 SoftSPL Flash any ROM to CID locked device
Thanks!! I wil post the results a soon as i flash a new ROM
Thanks!! It's 2:33 in the morning where I live and I just found this. Am trying now. Will report results.
I tried it and it didn't work. But it was probaly my fault.
Would anyone be so friendly posting some G4 Save-Roms. I think a lot of us guys aren't sure wich are save and wich aren't.
Thank you
thomme
My way
For anyone interested i did it like this!!!!
1. Flashed back to latest origenal rom.
2. Copied the file into shelltool directory to verify the ipl/spl status. (Normally most roms here dont have ipl/spl in it, never hurts to check though.
3. Used wizard service tool to make sure the enable rapi command is installed on device.
4. Copied the desired nk.nbf file into softspl (root) folder.
5. Ran the main exe file without errors and had wm6 flashed successfully.
saa044 said:
For anyone interested i did it like this!!!!
1. Flashed back to latest origenal rom.
2. Copied the file into shelltool directory to verify the ipl/spl status. (Normally most roms here dont have ipl/spl in it, never hurts to check though.
3. Used wizard service tool to make sure the enable rapi command is installed on device.
4. Copied the desired nk.nbf file into softspl (root) folder.
5. Ran the main exe file without errors and had wm6 flashed successfully.
Click to expand...
Click to collapse
The only difference now is that there is a ROM folder now
hmmm
thomme said:
I tried it and it didn't work. But it was probaly my fault.
Would anyone be so friendly posting some G4 Save-Roms. I think a lot of us guys aren't sure wich are save and wich aren't.
Thank you
thomme
Click to expand...
Click to collapse
Most of the roms on this page should be G4 safe.
http://wiki.xda-developers.com/index.php?pagename=wizard_WM_6
The ones I have tested up till now is the wrcx, TNT and SNE 3 ones. Try what I said in my previous post, that might also work for you. What error did you get by the way, a 620 errors that said it could not communicate with device?
the-equinoxe said:
The only difference now is that there is a ROM folder now
Click to expand...
Click to collapse
yup, that is nice.
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
dharvey4651 said:
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
Click to expand...
Click to collapse
Can you give us more detail to where you get the error and what it is? Also did you flash origenal rom with softspl or bootloader? Oh and if your device asks for permission to load the dll files it wont work.
the-equinoxe said:
4rd G4 safe means no IPL/SPL (Extended ROM hasn't been tested yet)
Click to expand...
Click to collapse
I have a CID Locked G4 and I can flash using RUU any ExtendedRom
contact me
dharvey4651 said:
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
Click to expand...
Click to collapse
Contact me via msn at [email protected] I will try me best to help u, but eventually EquinoXe is the master here.
saa044 said:
Can you give us more detail to where you get the error and what it is? Also did you flash origenal rom with softspl or bootloader? Oh and if your device asks for permission to load the dll files it wont work.
Click to expand...
Click to collapse
Here is exactly what my device is doing:
I flash back to the official T-Mobile WM5 rom for the 2.26.0001 IPL/SPL adn then let customization finish and then try to softSpl but with no success. On my MDA, it asks me to confirm something and the screen never turns white like it is supposed to do.
I have tried this several ways and on 2 different roms.
I have tried flashing back to T-Mobile official but skip customization 2 times and use softSpl to flash faria's rom and it failed. I tried once after waiting untill customization is complete and installing faria's rom and it failed once again.
I also tried installing cert_SPCS.cab and installing enablerapi.cab prior to running softSpl 2 different times, once before customization and once after customization. both times failed. this time I was using Black Diamond 2.0 instead of faria's rom to see if it was just the rom.
Not once did I ever get the white screen and not once did it flash successfully using this method.(At least not for me)
Sorry if this is a stupid question but I am in a hurry so have no time to search and investigate in this mater by myself for now!
I have flashed several roms in the past, right now I am running RomeOS 1.40
However I have now sold my device and need to revert to the original rom and SPL!
I have the Swedish rom, but the problem is that the file I have is RUU_Signed.nbh I dont have the wrapper or what it is called so that I can flash my raphael!
Also, do I need to SPL lock the device again? and if so how do I do that?
Last but not least, after flashing RomeOS, I got alot of information on the first screen (You know when you first start the device where it shows the radio version and everything!) But the problem is that I have tried to flash other roms but the information on the first screen is still there!
How do I get rid of it so it looks like the original?
Hope you know what I mean and how to help me!
Thanks in advance!
branko.savic said:
Sorry if this is a stupid question but I am in a hurry so have no time to search and investigate in this mater by myself for now!
I have flashed several roms in the past, right now I am running RomeOS 1.40
However I have now sold my device and need to revert to the original rom and SPL!
I have the Swedish rom, but the problem is that the file I have is RUU_Signed.nbh I dont have the wrapper or what it is called so that I can flash my raphael!
Also, do I need to SPL lock the device again? and if so how do I do that?
Last but not least, after flashing RomeOS, I got alot of information on the first screen (You know when you first start the device where it shows the radio version and everything!) But the problem is that I have tried to flash other roms but the information on the first screen is still there!
How do I get rid of it so it looks like the original?
Hope you know what I mean and how to help me!
Thanks in advance!
Click to expand...
Click to collapse
The wrapper is included in the attached file along with the htc splash screen. the original spl also in there so do the following:
1- extract the zip file and put the customruu + your RUU_Signed.nbh in one folder and run that to get your original rom
2- put now the customruu + htcsplash together and flash to change the splash screen
3- Now use the spl tool to revert to the original spl
karimartine said:
The wrapper is included in the attached file along with the htc splash screen. the original spl also in there so do the following:
1- extract the zip file and put the customruu + your RUU_Signed.nbh in one folder and run that to get your original rom
2- put now the customruu + htcsplash together and flash to change the splash screen
3- Now use the spl tool to revert to the original spl
Click to expand...
Click to collapse
Thank you, I did everything you told me and it worked like a charm!
I cant thanks you enough!
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
I did try flashing the room
I did try flashing the room with "Athena_SPL1.2_WM6.1_R0-CleanEdition_MiChY" but I got this message ERROR [270] : update error.
another error
This is another error, Please see the attaches image. whem i'm trying to flash it with another room.
ahmadkaram said:
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
Click to expand...
Click to collapse
Sorry to hear this.
You should have read a bit more first as you would have realised that you can't flash a radio without unlocking.
Using the unlocker would have changed the SPL to 1.2 and allowed you to flash the radio.
Have you tried doing a hard reset first?
You can only flash the original branded ROM for your machine now if you can find it.
Have a look in the wiki for original shipped roms.
I have a feeling the SPL1.07 was a dutch or german ROM that is very hard to find.
Good luck
Regards Lakeman