I'm running the latest HTC ROM for Sprint and I was just wondering if anyone had experienced problems with SPB Pocket Plus 4.0. I install it and it works fine for a little while, but then my phone starts randomly shutting off. Then when I power it on or soft-reset it, the HTC Mobility start up screen flashes for a second and the phone shuts off again. It randomly turns back on after awhile.
Anyone else have this happening?
Programs I also have installed myself:
SPB Phone Suite
A_C S2U2
Supware.net iContact
LogMeIn Hamachi
Microsoft Live Search
did you try restoring a full backup or a backup of your registry? or was SPB a fresh install?
SPB was freshly installed. I upgraded to the new HTC ROM, didn't bother backing anything up, and then just started re-installing the programs I wanted.
hmm i dunno what to tell ya then. i never had random shutoffs like you did, but SPB apps caused me some trouble when i tried installing them from a backup. if you have just started reloading programs, i would just hard reset.
Yea that's what I usually have to do once it won't boot back up. I really like the program. Too bad it won't work. Ah well. Thanks for your help.
firefurby said:
Yea that's what I usually have to do once it won't boot back up. I really like the program. Too bad it won't work. Ah well. Thanks for your help.
Click to expand...
Click to collapse
If it is not a hardware issue you should be fine. There are many people running this software including myself that have had no problems.
Uninstall and reinstall PP then soft reset the phone. If that doesn't work, reflash and install PP before anything else.
firefurby said:
Yea that's what I usually have to do once it won't boot back up. I really like the program. Too bad it won't work. Ah well. Thanks for your help.
Click to expand...
Click to collapse
do you reinstall all your apps at once? thats what i used to do, and would hold off resetting my phone after the SPB apps installed until ALL programs were back on. i found that this actually did some harm, and the SPB apps didnt run correctly. if you are doing this, hard reset your phone, then load all your apps except any SPBs. soft reset, then install your SPB apps one at a time.
hmmm... ok. I will give all of that a try. hopefully the results will be better this time around.
Well it seems it wasn't the programs, but the phone itself. Even after a hard reset and fresh flash of the Stock ROM everything still goes haywire. Sometimes it boots fine. But when I power it off and try to power it on again the start up screen flashes and appears to go off, but then the phone begins to boot after a couple seconds. Also, last night I was setting an alarm and had the keyboard open and when I slid it close the phone shut off. Any ideas?
ROM: 3.35.651.2
Radio: 3.35.05
SPL: 2.06.0000
Related
Hi
I installed piece of Software called GPS Assist to acompany by TomTom Nav software. Big Mistake.
Did a Soft Reset, and it gets to the Today screen, displays half the items on it (sometimes less or more after every reset) and then just freezes.
Tapping the screen or any hardware buttons wont do anything. Im guessing something that runs for GPS Assist is starting on bootup, and freezing it.
I really dont want to do a Hard Reset, I've been careless lately and not backed it up in quite a while.
Is there anything I can do, some way of getting into the bootup and stopping services..or anything like that ?
Thanks
David
XDA 1
WM2003
4.00.11
R4.16.00
hmmmm
Hey, for me have the same issue. but i tried installing Transformer 1.1.... Even I tried Hard reset... not working... have u found the solution????
I am using HTC ELF...
If any one have solution plz post it...
probably you will have to hard reset it, it has been a long time since i used a wallaby, you should of installed a program called safe mode which allows you to do what it says and go into safe mode on the pocket pc, spb pocket plus has a similar function too. This would of at least allowed you to boot up the wallaby and uninstall the offending program.
have you tried just leaving it on for half an hour ,connected to the pc. it might not be actually crashing just locked in a never ending loop?
And you did hold the power button in while using the stylus to reset(A hard reset) not just used the stylus to reset(Soft reset)?
I am experiencing random lock ups and freezes. It happens especially when I receive texts and incoming calls after about 30 minutes of no use. WiFi does not work either. It is very annoying and frustrating as I lose the text or miss the call. I have to reset the phone to get it working again. Sometimes it takes several resets.
EDIT: Other random tidbit...after playing with the phone a bit more, I have found that the phone functions perfectly when plugged into the power outlet-WiFi, texting, incoming calls...Maybe it has something to do with the power settings when not plugged in?
Is anyone else experiencing this?
Does anyone have a guess at what might be the problem?
I am running:
SPL 2.47
2.42.50 radio
DCD Custom 3.2.6
I have never had this problem until about a week ago. I am wondering if it is a hardware issue as I have tried re-flashing several times. It will work well for a few hours then act up again. I am thinking about relocking my phone and taking it in for service, but that is a last resort.
Thanks in advance for any help.
same thing happened to me. It started ever since i switch out for a new battery though. I seriously think it's my battery that causes these random freezes.
hmmm...it does seem to be a battery issue as it works while plugged in. Is there any way to reset the battery somehow?
Freezes here too
I've had my phone freeze twice in the last two days. Yesterday at work, connected via activesync, when I disconnected the screen wouldn't come on. Then today I was connected to the wall charger, disconnected and the screen wouldn't come on again. Had to remove the battery both times to get the phone working again.
My experiences
When the 6800 came out I liked it so much that I hooked my entire family up with one and I have seen more problems than a lot of people. I just thought I would share some of the freezing problems I've seen and what I've dont to replace them. And if the device is not freezing when it is plugged into the wall is the screen off like in idle, or is it real dim and still up? And one great thing you can do to reduce daytime freezes is to leave the device off at night when you charge it (if you can stand to do that), or at least soft reset when you grab it to start the day.
1) The most common reason for lock ups that I've seen is memory drain. It is caused from programs you've installed that continually run in the background. The biggest killer is recieving calls when the phone has been sitting at idle too long or trying to run activesync or an internet browser.
Fix: You can try to go back and remove the programs that you've recently installed till you lack this problem, but the ultimate fix is to hard reset.
2) Some registry edits have poor efects on the way the phone performs and this is when it seems everything is good, you are keeping the memory clear with a task manager, yet it still freezes in the middle of doing something.
Fix: Every titan seems to act a little differently than others. The only time I hack the registry is when one of my family members phone is having an issue, or when I get bored and I want to mess around with my own's performance. The remedy for this is installing the stock carrier rom and then moving to a rom of your choice. Read the posts too. Make sure the radio is compatible with the rom. Trust me in this forum you can find anything.
3) Memory boosting software like memaid or oxios close apps are great, however, with some programs they interfeer with each other and cause problems.
Fix: Forget this memory programs. Find a rom with good memory management.
Animez: That is how mine started...now it does it at least 6 times a day.
Sweeny: Thank you for your detailed response. I do not think it is memory drain as I use x-button and maintain my task manager quite frequently. I have not made any registry edits except for the DCD kitchen (3.2.6), arcsoft, and carrier cab I have installed...
Question: Does the registry get wiped on a reflash or do I need to hard reset to wipe the registry? I don't really trust myself all that much fiddling with the registry unless I know what all the strings do.
bdlane said:
Animez: That is how mine started...now it does it at least 6 times a day.
Sweeny: Thank you for your detailed response. I do not think it is memory drain as I use x-button and maintain my task manager quite frequently. I have not made any registry edits except for the DCD kitchen (3.2.6), arcsoft, and carrier cab I have installed...
Question: Does the registry get wiped on a reflash or do I need to hard reset to wipe the registry? I don't really trust myself all that much fiddling with the registry unless I know what all the strings do.
Click to expand...
Click to collapse
A hard reset or rom flash will wipe your registry since it's included in the new rom and also stored in the hard reset rom. So if you screw it up, worse case you hard reset, or reflash with a new rom/same rom, doesn't matter.
You can also back up your phone prior to making any changes, and if you screw up, hard reset and then restore the backup.
BTC
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
For some reason HTC sense has stopped working, I restarted my phone just a bit ago and when it booted back up it said launching sense but it never launched and then later said it was unable to launch sense.
I've tried turning sense off and back on as well as resetting a couple of times.
I haven't done anything with my phone since it stopped working, not installed any cabs or edited the registry just all of a sudden it has stopped working. For some reason programs that use sense for example the dial pad and contacts page (or at least I assume they use some part of sense) are working.
Luckily I can still use default windows screen until I find a possible answer to hopefully save me from a dreaded hard reset.
Anyone have any ideas on how to solve this without a hard reset?
I had this problem about 2 weeks ago. I flashed the phone back to stock ROM but it didn't fix the problem. So I had to take it in for repair. I would recommend you do the same mate.
Give this ago.
I've tried using that program above but unfortunately didn't work, so I did a hard reset and thankfully sense did work so it isn't as serious as some people where sense still doesn't work after a hard reset.
But luckily I did a complete backup before hand with spb backup, restored the backup hoping that maybe it would work but like I thought sense stopped working again.
Now just wondering if anyone knows what would be the best things to start disabling from the restore that wouldn't alter sense but yet keeping the phone as close to what it was before it started working?
Used SPB Backup? There uve got the option to customize ure restoring process.
Try to uncheck all/some manila files, uve edited, especially cookies manila files.
I had this. Turned out something on my storage card was giving me problems. Take your SDcard out, then reboot the phone. If Sense loads, format your storage card. If not, then it's another problem.
I've tried removing my memory card but the problem still persists, I then tried to restore certain parts from SPB backup until the problem starts happening again. Restorying everything but the registry and the databases that the problem exists.
Restoring the databases and not the registry leaves sense in a half working state and restoring the registry and not the databases leaves sense completely not working.
Is there a way of restoring all registry values that are related to htc sense and keeping all other values that are related to all other apps
aLlamaWithARifle said:
I've tried removing my memory card but the problem still persists, I then tried to restore certain parts from SPB backup until the problem starts happening again. Restorying everything but the registry and the databases that the problem exists.
Restoring the databases and not the registry leaves sense in a half working state and restoring the registry and not the databases leaves sense completely not working.
Is there a way of restoring all registry values that are related to htc sense and keeping all other values that are related to all other apps
Click to expand...
Click to collapse
Not sure about the registry. You might be better doing a task 29 and re-flashing your ROM.
Theres a method which involves deleting manilafull.xml from the windows folder that some people have reported as working...... It didnt work for me....
Ive had this a couple of times...........Once for no reason (I can think of)
The second time was because i took my sd card out while the phone was on.....Unless it just so happened to be a massive conincidence.......
Sorry to say but the only solution I ever found that works is......... the one you dont wanna do....
Yeah thought it would have to be a hard reset, ah well looks like I'll have to spend all day reinstalling a ton of stuff
Thanks anyway
happened to me the other day after i tried booting android. had to hard reset
I had that after booting the phone with a wrong SD card .. other one then i original use .. after putting in the original one again, it wasnt fixed .. had to hard reset
it happened twice with me. but when i flashed my ROM again it worked each time.
im having a problem like this...how can I hard reset without going thru manilla settings?
EDIT: jeez im such a dummy sumtimes....
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
Hi, i have a problem. so i put darkstone froyo on my htc hd2. Everything was working perfect even windows mobile and right now when i restarted my phone from android to go back to windows mobile my phone just showed "launching htc sense" but it does load up!:/ the phone and some programs work but i seem to be having a problem with sense as well I have cookies home tab installed as well as bsb tweaks. anyone have any suggestions? i really dont want to hard reset my phone.
Hello there guys. This is my first post on this forum, so please bear with me. I have problem on my device. Basically my htc hd2 was running fine, i had all my programs installed etc. I have created various backups of the phone using sprite backup.
I decided to do a hard reset because the phone never used to go into standby (screen off) when charging, only the backlight used to dim. I checked all the settings and i set the device to dim after 1 min and switch off after 2 mins when connected to external power. It still never switched off, this was turning out to be a nuisence specially when getting missed calls at night and screen staying on.
Therefore i done a hard reset and used sprite backup to restore various backup's as i had a few, but they wernt making the device function correctly. So once the backup file's were restored everything would be fine on the phone untill it went into standby, it then would fail to respond, sometimes the hardware button light up, sometimes nothing. The screen would remain off. I would really like to use the backup files as restoring the phone manually would be teadous. Any clues in what could be causing this, cant be the case off a bad backup as i have created a few.
P.S When hd2 is returned to stock it functions normally. Programs installed battlog, clear temp, bsb tweakes opera 10, opnmarket, skype, spb wireless monitor, coreplayer, srs wowhd 1.5.1.0 v2.1, coreplayer 1.3.6, myplayer, 1NETCFv35.wm.armv4i, 2NETCFv35.Messages.EN.wm, resco explorer + reg editor, cht cookie hometab.
Really appreciate it if you pros can shed any light on this? cheers
Same problem here!
Hi,
I face exactly the same problem - some days ago I was forced into a hard reset because I couldn't unlock my HD2 anymore (the PIN was not accepted anymore, which seems to be a know Win Mobile 6 bug...).
Nevertheless, after the hard reset, I restored from a previous Sprite Backupset and now the phone most of the time never wakes up from standby anymore - this drives me nuts!
I really do not to install everything from scratch (what is backup good for if the restored system does not function properly??
Any clues how to solve this issue?
Jan
Seems like the program you are using for backups of software isn't backing up properly and creating a corrupt backup. I would recommend just reinstalling everything from scratch.
What i recommend is just saving all the cab files on your SD card and when you need to hard-reset you can just run through all the installation instead of keep downloading the cab files. Also some Roms have auto-install folders where you can place your cab files in a certain folder and it will install everything for you. Other than that your pretty much SOL. Hope this helps.
Luckych
explicitsoundz1984 said:
Hello there guys. This is my first post on this forum, so please bear with me. I have problem on my device. Basically my htc hd2 was running fine, i had all my programs installed etc. I have created various backups of the phone using sprite backup.
I decided to do a hard reset because the phone never used to go into standby (screen off) when charging, only the backlight used to dim. I checked all the settings and i set the device to dim after 1 min and switch off after 2 mins when connected to external power. It still never switched off, this was turning out to be a nuisence specially when getting missed calls at night and screen staying on.
Therefore i done a hard reset and used sprite backup to restore various backup's as i had a few, but they wernt making the device function correctly. So once the backup file's were restored everything would be fine on the phone untill it went into standby, it then would fail to respond, sometimes the hardware button light up, sometimes nothing. The screen would remain off. I would really like to use the backup files as restoring the phone manually would be teadous. Any clues in what could be causing this, cant be the case off a bad backup as i have created a few.
P.S When hd2 is returned to stock it functions normally. Programs installed battlog, clear temp, bsb tweakes opera 10, opnmarket, skype, spb wireless monitor, coreplayer, srs wowhd 1.5.1.0 v2.1, coreplayer 1.3.6, myplayer, 1NETCFv35.wm.armv4i, 2NETCFv35.Messages.EN.wm, resco explorer + reg editor, cht cookie hometab.
Really appreciate it if you pros can shed any light on this? cheers
Click to expand...
Click to collapse
fast_jan said:
Hi,
I face exactly the same problem - some days ago I was forced into a hard reset because I couldn't unlock my HD2 anymore (the PIN was not accepted anymore, which seems to be a know Win Mobile 6 bug...).
Nevertheless, after the hard reset, I restored from a previous Sprite Backupset and now the phone most of the time never wakes up from standby anymore - this drives me nuts!
I really do not to install everything from scratch (what is backup good for if the restored system does not function properly??
Any clues how to solve this issue?
Jan
Click to expand...
Click to collapse
I have the same problem! Which else backup program is recommended?
harrygol said:
I have the same problem! Which else backup program is recommended?
Click to expand...
Click to collapse
SPB Backup v2.1.0 build.3536 has served me well ...
SPB Backup. I've had to restore backups to my phone several times, and it's worked like a charm. Be sure to consider using the SPB Backup Sync feature, which allows you to also so keep copies of your backups on another computer.
explicitsoundz1984 said:
Hello there guys. This is my first post on this forum, so please bear with me. I have problem on my device. Basically my htc hd2 was running fine, i had all my programs installed etc. I have created various backups of the phone using sprite backup.
I decided to do a hard reset because the phone never used to go into standby (screen off) when charging, only the backlight used to dim. I checked all the settings and i set the device to dim after 1 min and switch off after 2 mins when connected to external power. It still never switched off, this was turning out to be a nuisence specially when getting missed calls at night and screen staying on.
Therefore i done a hard reset and used sprite backup to restore various backup's as i had a few, but they wernt making the device function correctly. So once the backup file's were restored everything would be fine on the phone untill it went into standby, it then would fail to respond, sometimes the hardware button light up, sometimes nothing. The screen would remain off. I would really like to use the backup files as restoring the phone manually would be teadous. Any clues in what could be causing this, cant be the case off a bad backup as i have created a few.
P.S When hd2 is returned to stock it functions normally. Programs installed battlog, clear temp, bsb tweakes opera 10, opnmarket, skype, spb wireless monitor, coreplayer, srs wowhd 1.5.1.0 v2.1, coreplayer 1.3.6, myplayer, 1NETCFv35.wm.armv4i, 2NETCFv35.Messages.EN.wm, resco explorer + reg editor, cht cookie hometab.
Really appreciate it if you pros can shed any light on this? cheers
Click to expand...
Click to collapse
I think, I have solved the problem. I reinstalled and re-configured all our common programs (battClock, clear temp, bsb tweakes, opera 10, skype, spb wireless monitor, coreplayer, srs wowhd, NETCFv35.wm.armv4i, resco explorer + reg editor, cht cookie hometab) and it work with no problem in the last 24 hours. It means that one of the above programs couldn't be restored properly with the "sprite backup".