I have just bought an 8GB card and need to swop everything across from my 4GB. I'm rooted with apps2sd and MCR ROM installed.
Now the questions are:
What is the best way of doing this the right way?
Do i need to partition the new card, or does MCR do this i cant remember!
If i drag and drop everything from my 4GB to my 8GB will it work?
Anyone else had to do this?
Any help will be very much apreciated...
Just been thinking if i install the modded recovery image on my new card will i be able to create partitions with that?
Anyone???
I just copied everything...
I just copied everything and it just worked.
Cheers for the reply. I`ll try it.
Wondering if anyone has been able to do this, and if not, if they'd be able to get this working on the device:
http://forum.xda-developers.com/showthread.php?t=619285
I tried a few things based on my limited knowledge, but I had no luck.
I am trying the same thing as you are trying, only trying to get Android into the Mogul's internal memory (to replace WinMo), per the instructions found here:
http://forum.xda-developers.com/showthread.php?t=636024
Would love any thoughts folks in the know might have.
sd_matto said:
I am trying the same thing as you are trying, only trying to get Android into the Mogul's internal memory (to replace WinMo), per the instructions found here:
http://forum.xda-developers.com/showthread.php?t=636024
Would love any thoughts folks in the know might have.
Click to expand...
Click to collapse
Yea only one really big problem with running NAND Android on the Mogul (Titan). That link is for the Touch (Vogue).
We are stuck with the SD method for now. And anything above 1.6 runs really slow.
RyanMogul6800 said:
Yea only one really big problem with running NAND Android on the Mogul (Titan). That link is for the Touch (Vogue).
We are stuck with the SD method for now. And anything above 1.6 runs really slow.
Click to expand...
Click to collapse
Good to know. I was wondering at the speed of the higher versions on the Titan. I think it would be cool to dual boot one of your ROMs with a 1.6 build.
Is anyone working on a NAND Android for the Titan?
i hope so... i got myns warm donut to work fine on my titan, but i had to do it from the sd card.. i figure all we need is a .nbh file, and we can nand this!
I have mssmison's eclair v7 (android 2.1) running off my SD card at a decent speed, i was suprised. its just about as fast as mym's warm donut build. im running a custom default.txt file and the eclair zimage and it seems to work well, not the fastest (fastest is probably the 1.5 ion build) but it works.
just outta curiosity (im a vogue user)
trying to help a friend with a mogul out.
You guys have a class 6 microsd? or is it class 4.
Speed ok with anything below a class 6 microsd?
Also did you guys partition it? ext2 or swap?
I really hope someone can add nand to the mogul.
im using a old class 2 microSD card, slow as hell but it dosent run extremely slow, i partioned ext2 and it ran at decent speeds, i want a better SD card so i can really see how android would run on the mogul but i dont have the money to (odviously or i wouldnt be using such a out of date piece of hardware)
nyterage said:
I have mssmison's eclair v7 (android 2.1) running off my SD card at a decent speed, i was suprised. its just about as fast as mym's warm donut build. im running a custom default.txt file and the eclair zimage and it seems to work well, not the fastest (fastest is probably the 1.5 ion build) but it works.
Click to expand...
Click to collapse
Did you have to flash the NBH file to your phone to use this? If not could you post all the files you use?
I'm currently using the initial 1.5 version which is basic. It doesn't require flashing any files. All the files you need are just placed on the sd card.
Marbieskarb said:
Did you have to flash the NBH file to your phone to use this? If not could you post all the files you use?
I'm currently using the initial 1.5 version which is basic. It doesn't require flashing any files. All the files you need are just placed on the sd card.
Click to expand...
Click to collapse
um i dont think you can flash android on moguls yet; therefore no nbh can be used. I know nbh is becoming the newer way to have android on either nand or sd but the support isnt there yet for moguls.
The way the person above is using androind on the mogul is through the sd card. You have to (similar to the way you're using android on your phone now). I believe you are using haret.exe. Anyways to FULLY maximize performance for android on sd card, you have to partition the sd card (divide the sd card).
They way you're using it right now is only 1 partition (lets say you have a 2GB SD card formated to fat32 or ntfs).
However to make android run at decent speeds, you have to partition (divide that 2GB SD Card into 3 parts).
2GB SD card gets broken down and split up into:
*256MB formated to ext2 (instead of fat32)
*Another 256MB formated to ext2
*1536MB formated to FAT32 (where you put your data normally)
After you partitioned the sd card..... you now install android (instead of running it like you've been)
You run haret.exe as usual but theres and option to copy data and systemto the ex2 partitions you made on the sd card.
the 2 ext2 partitions above will be contain the android data and system files
and will make android run faster because android files are all in that partition and it doesnt have to search and filter through your user files.
In my signature theres a video on how to partition your sd card.... but you have to figure out how to get your sd card to detect on your computer..(via card reader or other methods)
Thanks for the info intimidatorx31. That helps out tremendously. However, on the newer builds of android that are posted, instead of having the traditional system.img and rootfs.img files there is an androidinstaller.tar. Do I now use that? Also, which files go on each of the 3 partitions? On all of the directions I've found have only stated to put the downloaded files in the "andboot" folder.
Marbieskarb said:
Thanks for the info intimidatorx31. That helps out tremendously. However, on the newer builds of android that are posted, instead of having the traditional system.img and rootfs.img files there is an androidinstaller.tar. Do I now use that? Also, which files go on each of the 3 partitions? On all of the directions I've found have only stated to put the downloaded files in the "andboot" folder.
Click to expand...
Click to collapse
You're right; forgot everything has moved to andboot folder setup with no more roofts as well.
Well the android rom im using (Myn's warm donut for the vogue) has
the classic sqsh files which is what YOU need to run it off sd card using haret.exe (running off sd card).
http://forum.xda-developers.com/showthread.php?t=619980
this is where the thread is
Heres the direct link to dwonload:http://download203.mediafire.com/9k22dfx80ymg/kzyxtqkzcwa/myn-WarmDonut-03-16-2010-SQSH.zip
for additional instructions go here: http://forum.xda-developers.com/showthread.php?t=648045
Remember if you are using off sd card its highly recommended to partition the sd card; so it doesnt have to search the entire sd card...itll just have to search within that partition you've created (ext2 partition which is recognized by android)
Thanks again for the info.
Lost trying to get Android 2.1 on my Titan!!!
I have mssmison's eclair v7 (android 2.1) running off my SD card at a decent speed, i was suprised. its just about as fast as mym's warm donut build. im running a custom default.txt file and the eclair zimage and it seems to work well, not the fastest (fastest is probably the 1.5 ion build) but it works
Click to expand...
Click to collapse
have a few questions if anyone can help:
1. when i go here to get the myns warm donut version post am i supposed to use the SQSH version? if not i should be using the NoMoRootFs 240x320 version correct?
2. how do you install the mssmison's eclair or myn's warm doughnut? I just come back with errors each time.
3. what is the correct setup of the 3 partitions? I used partition manager 9 and made 3 partitions, but when i tried to install android there was no option to choose a partition.
4. is mssmison's more stable than myn's doughnut?
Sorry for all the questions, i'd love to mess around with android, but my last install was the myn's warm doughnut sqsh version, and it was installing for like 2 days....scrolling a bunch of files repeatedly it got up to 53276.1234 until i finally just said forget it, and rebooted. If anyone can help i'd be GREATLY appreciative!!
Thanks Gang!
miraclmoore, read the post a few above mine, it explains how to partion the SD card, and how i did it? custom default.txt, zimage for the mogul and a little technical knowldge, prettymuch all you have to do is put the androidinstall.tar in the andboot folder and run haret.exe then as soon as it vibrates press and hold the center button til the install screen appears, select to put data and system on ext2 and install it, runs with no errors (except completely randomly tty access errors when it first starts but those dont matter)
just wondering.....
nyterage..where did you find the custom default.txt and zimage for the mogul? considering all builds are for vogue, kaiser, and polaris? also when I use myns sqsh the system tries to create a new dataa store instead of just using the sqsh files like i've seen in others installations. I used partition manager 9 to partition my card. also do u need to give the 2 ext partitions drive letters? hope I am not asking stupid question as this is all a little new to me.
So am I completely boned if the down direction on my d pad is doesn't work? I can get to the install menu but then I can;t do anything at it
can someone provide a exact instructions on how to get a ppc 6800 titan.
i have spl-2.40
ppck 23569 image installed.
i couldnt get the android 1.5 to work from the "android packages" thread.
can someone say if this (android 2.1) or if android 1.5 working on the ppc 6800 titan thread.
if it is working please provide an exact instructions on how to get this working with the exact files needed for the sd card method im guessing.
I have the same problem
nismotigerwvu said:
So am I completely boned if the down direction on my d pad is doesn't work? I can get to the install menu but then I can;t do anything at it
Click to expand...
Click to collapse
Any build I use when I get to the install screen to select where I want to install it, I cannot select anything. Only 2 things I can highlight in the list are install to NAND and quit.
The proper options are selected by default buy I cannot get to menu option 1 to do the install.
Any help would be appreciated.
Thanks
Hi guys, so this is my situation:
I have dual boot WP7 (nand) and Android (sd). My SD card is partitoned, half for wp7, half for android.
I would like to try some custom WM roms now, and I don't know how to get back from wp7.
So:
1) How to go from WP7 to some custom WM6.5 rom?
2) Will I still be able to run Android form SD card?
Thanks,
There is more than enough information on this topic available at xda. Do a search first please.
Cenobite_ said:
There is more than enough information on this topic available at xda. Do a search first please.
Click to expand...
Click to collapse
+1 for this.
It´s just astonishing that we have to repeat again and again the same story:
Simply flash your stock ROM via SD card method, this way, you will completely erase everything on your phone. The SD card itself will not be changed, btw.
You might also flash via USB using the RUU.exe file, to keep HSPL, but I still would recommend to start from scratch.
Can someone please help me?
I have the same problem after formatting my sd card and trying to remove hspl, now it says "Not allow" when i turn my phone on and then displays the same as OP's phone, I'm freaking out, i don't know how to access SD card when i can't turn on my phone please help :[
Try doing a task29 then flashing a stock rom. It should erase the spl and every thing else. From there you should be able to do what you want with Wm and SD android.
Sent from my HD2 using XDA App
Hello,
i'm new here and my English isn't so good, but i have any questions regarding the sdcard and flashing.
i mean, i have now alex-v1.8 gb sense hd rom. But i want change to MildWild V-4.3Final Based on Oxygen 2.3.2.
Now i want backup my rom with 4ext rovery and save the file on my computer. Then i want format my sd card and then repartition it with PartitionWizard Home edition, or which program would you suggest for partition?
And then i will flash MW 4.3 Oxygen. If it should not work or any problems, i transfer the backup file to my sd card and then i restore Alex 1.8 gb sense hd rom with 4ext recovery.
My question is: is my approach correct? Would there be problems if I would proceed as described above? Please help me and which partition program would you suggest?
And would you please explain it a bit simple English
and sorry for my bad English
can nobody help me?
I have been trying for at least two days now to get CM10 on my nook tablet, I have been going through many guides to do it but most are very specific and I don't really know where to go or what to do (I am a total noob at this). Yesterday I found an extraordinary tutorial that explained step by step everything I had to do, I followed it and again I couldn't get past attempting to install the roms because it cannot find the files. I had reached this same stage by following different tutorials but in the end I couldn't find the zips. I even tried with another SD card and the same happens. I have thought of putting the rom zips in the internal memory and running them from there but I'm not sure if it's a good idea.
(Is it any good to tell you I wiped a N2A card 8GB with 2.2 in it to use as my sd card for CM10? I believe it was running CM7 but a week ago I couldn't get it to work so I decided to try CM10 myself thinking it couldn't be that hard)
I really hope someone here knows what can I do because to me my nook tablet is pretty much useless without Android.
Since you're a newbie I suggest using the SDC image. You can download it from here: http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
Note this does not flash to internal so it doesn't change anything on your book itself.
All you need to do is write the image file to an SD card and you're good to go. No need to flash it from recovery. You can also repartition the SD card for more space in the data partition, allowing more apps.
If you get stuck or need something explained just reply or send me an email.
Only the zip files are missing? Or all folders are missing?
Sent from my ST27i
Zip files missing
satan89 said:
Only the zip files are missing? Or all folders are missing?
Sent from my ST27i
Click to expand...
Click to collapse
Only the zip files are missing, I can browse through folders without a problem.
Saturnath said:
Only the zip files are missing, I can browse through folders without a problem.
Click to expand...
Click to collapse
Just place them in a location where cwm recovery is reading. Doesn't matter if its SD or internal.