Today I restored into my Touch Dual an Original TIM Italian ROM because with TOM ROM I can't use one exchenge certificate... I follow all the step and now my Dual is full working with the old original rom but I have a problem... On startup when the display write smart mobility and after the version of radio and ROM, the version of the ROM is a mix from the original version and the write niki projet a write like this D1iki Pro in stead of D and the code of ROM... What can I do to fix this problem? I try to reinstall 2 times the original ROM but i read always the same "error"... thanks a lot and sorry for my english
make hard reset ... ignore the splash screen
The phone works fine but I want to fix this write in the first screen because I think that would be a problem if I bring the phone in warranty
NetrunnerAT said:
make hard reset ... ignore the splash screen
Click to expand...
Click to collapse
It's not a splash screen... I read this wrong ROM number in the screen smart mobility under this write.... In red
Nobody can hel me?
make a screen shot ... i dont know what you mean ....
On the first screen image when I starup the Phone the phone write smart mobility and then in the lower part of the screen in red write the code of ROM and RADIO. When I flash the TOM's ROM I read on the screen NIKE PROJET but when I Flash the original ROM I read 1IKE PROJET and not a code of original ROM 1.31.408.09... Exclude this problem the phone work so good with the original ROM but I think that Would be a problem if I bring the phone in warranty... thanks and sorry for my bad english
I think that the problem probably is this in the picture... When I install the Original TIM ROM the version is set to 1.00.000.0... In fact in my start screen when I flash the original ROM the Only numer that overwrite the name niky projet is 1... Only a litlle help...
Flash a Full Rom, with Radio, OS, SPL and Splash screen. This clean all! Then write TIM over it!
NetrunnerAT said:
Flash a Full Rom, with Radio, OS, SPL and Splash screen. This clean all! Then write TIM over it!
Click to expand...
Click to collapse
sorry but I'm a newby with windows mobile.... where can I find a full ROM? And how can I flash the Splash screen.... Thanks a lot for your assistence....
http://www.4shared.com/file/3772442..._13170709_Radio_Nike_1581627_signed_Ship.html
start sspl and flash this rom!
so I start sspl and then flash this ROM without flash before the hard spl is it right (I've got alredy installed the hard spl) ? And then for flash a splash screen? I flash it like a ROM? Or splash sceen is inside this rom?
Just start it and flash.
I try to flash that ROM but the process always stop at 15 % with a cummunication errror... I remove the battery and the phone start with the display in 3 color mode hardspl.... where I'm wrong?
Is possible that the error is caused by the hardspl installed on my phone that don't allow to the spl of the ROM to install in the phone?
Related
I have installed WM5SE_4 on my Wizard G4 and it works great. I would now like to try TNT, but when I try to install it, I get ERROR 300. I have tried to reinstall the Cingular ROM, but I still get ERROR 300. I installed hard_SPL-G4, before I installed WM5SE_4. What do I have to do to change this ROM to another?
Replace RUU in the TNT rom with 'MUNS_RUU' or copy and paste nk_nbf folder of TNT rom in MUNS_RUU folder and run the RUU of the MUNS_RUU.You can get the MUNS_RUU from the HardSPL thread.
zabardast_1 said:
Replace RUU in the TNT rom with 'MUNS_RUU' or copy and paste nk_nbf folder of TNT rom in MUNS_RUU folder and run the RUU of the MUNS_RUU.You can get the MUNS_RUU from the HardSPL thread.
Click to expand...
Click to collapse
Wow!! That was slick. Thanks alot!
jphuffs said:
Wow!! That was slick. Thanks alot!
Click to expand...
Click to collapse
Thanz
You are welcome !
I changed ROM on my G4 Wizard to a TNT, then added cube and baterry status for speed it up a little. It was running OK.
It blocked some time after and I am not able to load a ROM again. After reading a lot on foruns I tried Wizard lobe, 5buttons the original ROM and, after 100% loading procedure, the Wizard blocks on the very first page with the IPL 2.21.0001 e SPL 2.21.olip and that is all. I always have to start on the bootload screen (3 colors screen).
I read that as long as I can access the 3 colors I am not bricked.
can you help me?
Tks in advance
GBADCC said:
I changed ROM on my G4 Wizard to a TNT, then added cube and baterry status for speed it up a little. It was running OK.
It blocked some time after and I am not able to load a ROM again. After reading a lot on foruns I tried Wizard lobe, 5buttons the original ROM and, after 100% loading procedure, the Wizard blocks on the very first page with the IPL 2.21.0001 e SPL 2.21.olip and that is all. I always have to start on the bootload screen (3 colors screen).
I read that as long as I can access the 3 colors I am not bricked.
can you help me?
Tks in advance
Click to expand...
Click to collapse
Yes ! as long as it gets into bootloaders (tri color) its safe,but DON"T ever flash a Button's Rom onto it,as its a G3 rom with G3 IPL/SPL,it'll certainly Brick it, if it still goes to bootloaders,I must say you are a lucky guy,it didn't get bricked as you flashed Button's on it.
You must have overclocked it too high thats why it got stuck.Now as it goes to bootloaders and its HardSPL (IPL 2.21.0001/SPL 2.21.olip) flash wizard_love rom,hope it'll recover back,after that flash any wm6 rom of your choice,but don't overclock it too high.
zabardast_1 said:
Yes ! as long as it gets into bootloaders (tri color) its safe,but DON"T ever flash a Button's Rom onto it,as its a G3 rom with G3 IPL/SPL,it'll certainly Brick it, if it still goes to bootloaders,I must say you are a lucky guy,it didn't get bricked as you flashed Button's on it.
You must have overclocked it too high thats why it got stuck.Now as it goes to bootloaders and its HardSPL (IPL 2.21.0001/SPL 2.21.olip) flash wizard_love rom,hope it'll recover back,after that flash any wm6 rom of your choice,but don't overclock it too high.
Click to expand...
Click to collapse
I guess you are rigth. I overclocked with the allowance to float the frequence and did not set an upper limit.
The problem now is - I can get to the bootloader, start RUU flash procedure ( it goes slowly to 100% as usual) and reboot. After that all I can get is the HTC start screem and the wizardlove (the blue image) or TNT Series image without the radio data. It does not move forward to any other action.
With a soft reset it gaves me the HTC and the same image but with the radio data. Before asking I spent a lot of time searching in forum but I did not got to a similar problem.
Many thanks for your support.
Try a Hard reset and remove,if any sdcard or minisd.As it's HardSPL,you cannot flash an official rom also,coz it contains ipl/spl in it,Official rom is only possible after removal of HardSPL,the only way out is to have a working OS on the phone,try to flash any custom build wm6 rom.
Dear Zabardast_1
I tried to flash TNT, Qtek and a brazilian local operator ROM and no way. It always, after the 100% loading, boots and remains on the first screen.
With Farias ROM the same happens. It freezes with the first logo loading WM.
The hard reset shows formating FAT and fail to format.
Do you have any other idea?
Tks for your support.
As per the title... enjoy everyone
http://giesecke.tk:8090/privat/topa...&download=RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
mirror thanks to xkovi
http://rapidshare.com/files/249662958/RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
EDIT:it is a beta version of the ROM, it won't flash as such. pls use the following RUU.NBH file which contains the OS only part if u want to test it.
http://giesecke.tk:8090/privat/topaz_rom/index.php?dir=Cooked_ROMs/WM+6.5/Aman/&download=RUU.rar
Are u kidding me? Really stock rom with WM6.5? Have u already tried it???
Cant believe its true!!!!!
OMG
i cant belive it
Can someone post mirror please...Rapidshare maybe
what is the source of this rom?
Is this the official 6.5 release..? Could you comment on the source of this..?
Dont download it semi bricks the Topaz - Shadowline said in xda-devs irc
After trying to flash, it sticks at 99% and then dies after a few min. Which causes the phone to only start back into tri color bootloader with errors and no longer boot WM. Luckily flashing another rom is still possible.
Use caution when testing this rom. It may be just an isolated event or something more serious.
On another note, the next roms that I flash now say "Test rom only Not For sale" lol
im flashing now, lets se what hapends
Seemse genuine enough, but I wont know until im done flashing (5 min!)
Thx for your post shadowline, it was a few seconds before I wanted to start flashing
However, if someone wants to test it, here's the mirror:
http://rapidshare.com/files/249662958/RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
yupp, hangs at 99% for me to.. Well.
Thanks for the update.. I was just about to do my first flash of my 1 week old Topaz! I will wait. Just wonder why the the thread starter is quiet and gave little information at the opening post!?
Plz be carefull with this!!!!!
Downloaded twice the file.
Flashed 4 times, with NO success!!!!
1. Flashed with the original exe, the progressbar stuck at 99%, terminate with "Connection Error"
2. Extracted the .exe in separate folder and flashed again, same, progressbar stuck at 99%
3. Replaced the original RUU with that one what comes with all the cooked ROMs, again stuck at 99%
4. Extracted the secon download,flashed without success!!! Stuck at 99%
At least, flashed again with NTGZ28 Standard ROM and all is OK, no damage done to the device.
Any hope that our ROM Cooks solve that problem, if that is really a HTC WM 6.5 ROM???????
Update: this rom stopped at 99% (useing windows RUU), and when soft-reset it only shows color bars but will still be flashable with TOPAIMG.nbh on SD card *pooh*
So im flashing back EnergyRom now. Thank good for (mostly) failsafe flashing!
Do you or anyone that flashed (i use that term lightly lol) have that text about a test rom when you boot your device?
yes i have, red text on bootscreen. What's that about?
i've faced same problem as all of you. but i successfully managed to flash the OS part only. the red 'test only' text seems to be from the splash screen.
damn, I was sooo going to flash that!
!Aman! said:
i've faced same problem as all of you. but i successfully managed to flash the OS part only. the red 'test only' text seems to be from the splash screen.
Click to expand...
Click to collapse
could you please upload the os part that you flashed or tell us how to circumvent the other part?
Thanks
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Obsolete
see http://forum.xda-developers.com/showthread.php?p=19893221#post19893221
id\ did it and my mobile now dont make any response to any kind of action i cant even open it boot it or any thing
noooooooooooooooooooooooo
did you have a stock rom or custom one before flashing ? how did you flash it?
thx in advance
i was using latest stock rom of my country (middle east)
but i used the spl flasher but changed the file with the link in this forum and then every thing went black i cant even press volume down to install a rom or boot any thing cant even charge my mobile
warning
pls dont installllllll my phone is completely brick dont installl people
i swear my phone is now completely brick down
Flash back hardspl or your backup
The old SPL file was corrupt, the first post is updated with a working new SPL.
How to flash this to my phone?
I tried via rom update utility but it can not read the file.
[edit]
obsolete message
Thanks.
This file works with rom update utility.
Great.
Did you find any difference with SPL 1.28 other than the charging animation?
so far no.
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
VirusPlus said:
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
Click to expand...
Click to collapse
Do you have 1.28 HardSPL or stock 1.28?
You should probably flash HardSPL first
I have 1.28 HardSPL, not stock one. I reflash HardSPL tho but still nothing
I'm searching for a way to fix this.
Will keep you posted
[edit]
obsolete message
I've had some fun with the TG01 after finding after a couple of years, manged to play a few roms 6.5>7 and back to 6.5 and then managed to brick it after messing with EFS2 in a bid to unlock.
Thanks to qinwengui I managed to get it working, but I'm stuck with one ROM that I would like to change from.
At the moment I have 'miRom 7 radio 0321' rom running from mirolg's thread " http://forum.xda-developers.com/showthread.php?t=1367055" but I can not change it to any other other rom??
I've been trying to change to another one or two that I'd like to try from the rom section but they will not boot.
I can sucessfully use TG downloader or MicroSD card and although any other rom will flash, the phone will not boot.
After ever attempt, I need to go back to miRom 7 radio 0321, which works fine everytime.
Am I missing something obvious?
I've only tried the following "[ROM][miROM1_rel. 6][ENG][18.04.2011] HTC SENSE 2021 with 96 MB free RAM " &
"[ROM][miROM12][ENG 31.12] [GER 02.01] NEWest Build 29007 OS6.5.3 CLEAN 94 MB free RAM" but they will not boot up.
I suppose I'm grateful I have the phone working again in the main, but I'd love to try another ROM if possible.
As said, can use TG Downloader, 100% sucessful message appears, phone will not restart automatically. When I manually restart, green light, will not boot.
I can also use SDDL/prg, phone shows white screen, do not remove SD or power off, takes a while, then will not boot.
Any ideas would be truly appreciated.
D
Hi.
First I suggest to flash any official rom ( it was said in different threads it could help in some cases because it contains full kernel ). If it works You will be able to flash any custom roms. It it not help, maybe You have not original bootloader from WM6. but this one that was needed to install WP7 ?
Regards
fdjacentyfd
Thanks for the advice and good shout for the boot files. Any quick way to check? I have tried a malaysia official rom as I could not find much else -
TG0110_5005180028TSW.tsw but still same, not boot. Thanks though
I guess , roms You want to flash have not radio 321 ?
I think You will be able to flash any rom with radio 321 so maybe simply change a radio in any rom You want to have to radio 321. First start with official rom. Maybe after success of such operation You will be able to flash any rom with radio other than 321.
Regards
Wow, That's me lost now
I just followed every step from this post "[GUIDE] upgrade to wp7 / flash wp7 rom/ downgrade from wp7 to 6.5 WM OS"
My thinking was in case as you mentioned the boot files were wrong, all worked right up to boting on WM7 rom and I got a black screen with a picture of the phone connected to PC in white colour. Could not get past that. Now backtracking and also following the get back to WM6.5 tut and another rom, still no go. As I write, trying the 0321 rom that has been working. I can't get my head around this.....
Are you thinking that I can only use a rom with the radio 0321? Is this my problem?
Long pause as the 0321 rom via tg downloader is on 99%, may aswell wait to update -
WORKING! Absolutely stuck as to why this is the only rom that works, tried a few 6.5, a few WM7???
D
I am bit confused now . What is working ? Still Miro7 rom with radio 321 loaded via tg downloader ? If so , could You test any official rom ( use sdll+ ) changing it radio to 321 ? Radio 321 has always been "suspicious" for me. Taken from God knows where with for eample battery driver bug . That is why I do not use it even if some people
are say enthusistic oppinions about it.
Regards
yes, sorry for any confusion. The only rom I can get workign is the 0321 rom posted on mirolgs tut for 6.5>7>6.5??
thanks !
fxdjacentyfxd.... thank you Changed rom 0321, job done! TY!!