wm6 rom problem help needed - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi guys i need some help
i have the hermes 200
ive flashed to wm6 with schapps 4.31, everything was peachy until i soft reseted, after the device finished loading (loaded ok) once it was powered off , it wouldnt power on again. i had to restart several times until i could get it to work properly. this probled repeated itself every time i soft reseted.
i thought the problem was with the rom so i flashed to CRC 11.2 stable version and got the exect same problem.
any ideas

Related

Have I trashed my TP ?

I have flashed a lot of roms lately, ROMeOS - all flavours DSC, SWTOS, and serveral reconstructed roms for testing. But today my phone started to behave very strange - strange crashes. Could flash a rom and it wouldn´t boot while it the same rom worked before. And with just the rom and no 3rd part application suddenly I can´t press the Programs or setting - nothing happens. And then the phone reboots and make an hard reset. I feels like the flash memory in the phone is defect. Could I verify that in someway ? I have reflashed Hard SPL and restored SPL to the default and reflashed stock rom but nothing seems to help - it crashed randomly with nothing installed
Yes, my TP died and has gone to HTC heaven Three weeks old and now I have to wait two weeks to get it fixed. So I have to use my Diamond, damn - I really like the TP much more

Help!! Unusual Titan problem!!

I have spent the past week on this problem , including reading ppcgeeks & ppckitchen threads for hooouuuurrrs. And still no working phone!
What I have: ActiveSync 4.5 on an XP desktop. I successfully RUU WM6.1 onto my Alltel PPC6800, had the upgraded radio, internal GPS worked.
The problem:
From the Bootloader screen, without ActiveSync, I flash a ROM. After RUU says it was successful the Mogul resets. No LEDs light up and the screen stays off. I Hard Reset. The Green LED comes on and stays on.
I’ve removed the battery and Hard Rest and Soft Reset with the result being that just the Green LED stays on.
Whenever I use the RUU the current ROM version on the phone is not displayed. But the RUU lets me continue.
I can always get the Bootloader (tri-color) screen, which has:
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
After re-flashing the stock WM 6.1 ROM, the phone gets into a reset loop with nothing displayed on the screen and the Green LED blinking.
I’ve re-flashed 2 previous Kitchen ROMs that worked originally.. No change.
I’ve removed and then reinstalled ActiveSync. Rebooted XP. Still no connection.
I’ve removed and reinstalled PPCKitchen with successful updating. Rebooted XP. No change.
I’ve tried to flash from my fats formatted 2gb SD with renaming RUU_signed.ngh to “TITAIMG.nbh” and copying it. Got the Grey screen with progress bar. Then Hard Reset. No change.
I’ve tried every combination of Soft reset, Hard reset, battery removed combination with each ROM flash.
I’ve tried the Titan Exit Bootloader exe. This was successfully executed but did not solve the problem.
I’ve tried flashing the radio but I get a Bad Command error.
Update: In an attempt to diagnose the source of the problem by eliminating my cooked ROMs as the problem, using the SD method, I Flashed third parson's cooked Alltel ROM.
By all indicators the Flash was successful. I have Hard Rest (pushing the "R" then "space bar" when told to do so) several times. (Once I removed the battery for several minutes then Hard Reset.) But I still have the same problem of after Hard Reset the Green LED stays on and the screen appears to be off.
Since I am having the same results with my cooked ROMs I believe that my Bootloadeer and ROMs are OK. (Looking for confirmation here.)
Then is the problem with the radio? Or is it a hardware problem?
Any help is appreciated!!
Maybe try updating the radio? As far as I remember there were a few radio versions that did have internal GPS enabled but are still incompatible with the latest ROMs.
What radio version are you running now?
WatchOut said:
I have spent the past week on this problem , including reading ppcgeeks & ppckitchen threads for hooouuuurrrs. And still no working phone!
What I have: ActiveSync 4.5 on an XP desktop. I successfully RUU WM6.1 onto my Alltel PPC6800, had the upgraded radio, internal GPS worked.
The problem:
From the Bootloader screen, without ActiveSync, I flash a ROM. After RUU says it was successful the Mogul resets. No LEDs light up and the screen stays off. I Hard Reset. The Green LED comes on and stays on.
I’ve removed the battery and Hard Rest and Soft Reset with the result being that just the Green LED stays on.
Whenever I use the RUU the current ROM version on the phone is not displayed. But the RUU lets me continue.
I can always get the Bootloader (tri-color) screen, which has:
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
After re-flashing the stock WM 6.1 ROM, the phone gets into a reset loop with nothing displayed on the screen and the Green LED blinking.
I’ve re-flashed 2 previous Kitchen ROMs that worked originally.. No change.
I’ve removed and then reinstalled ActiveSync. Rebooted XP. Still no connection.
I’ve removed and reinstalled PPCKitchen with successful updating. Rebooted XP. No change.
I’ve tried to flash from my fats formatted 2gb SD with renaming RUU_signed.ngh to “TITAIMG.nbh” and copying it. Got the Grey screen with progress bar. Then Hard Reset. No change.
I’ve tried every combination of Soft reset, Hard reset, battery removed combination with each ROM flash.
I’ve tried the Titan Exit Bootloader exe. This was successfully executed but did not solve the problem.
I’ve tried flashing the radio but I get a Bad Command error.
Update: In an attempt to diagnose the source of the problem by eliminating my cooked ROMs as the problem, using the SD method, I Flashed third parson's cooked Alltel ROM.
By all indicators the Flash was successful. I have Hard Rest (pushing the "R" then "space bar" when told to do so) several times. (Once I removed the battery for several minutes then Hard Reset.) But I still have the same problem of after Hard Reset the Green LED stays on and the screen appears to be off.
Since I am having the same results with my cooked ROMs I believe that my Bootloadeer and ROMs are OK. (Looking for confirmation here.)
Then is the problem with the radio? Or is it a hardware problem?
Any help is appreciated!!
Click to expand...
Click to collapse
Sounds like you need to just flash a new radio to your phone.... I had the same problem at one time and that fixed it...
Problem solved??
Skippyd, Thanks for the suggestion!!
Interesting Update: I started to take more risks. (All flashing was done by SD method.)
I re-flashed radio 3.42.50. Although the flash was completed there was no change in results. I re-flashed both ROMs that had worked and ones that had no change. And still no change.
Then I decided to flash any ROMs made for Alltel (Titan) that I could find. (I wasn't really seeing if the ROMs had radios in them.)
I flashed nueROM_MTitan-201-201-spackr.rar which booted to the 2nd splash screen [AAAHHH!!! something different!!!] The following information also appeared on the screen:
Nuekernel 3.01
Build 109(c) 2008 No2chem
High Mem (camera disabled)
HTC
M09
B03
P=DCAAXAM 4350H
R=3.42.50
D=3.56
After resets and re-flashes of this ROM I could not get past the 2nd. Splash screen.
I next went to the link from: http://forum.ppcgeeks.com/showthread.php?t=22132&highlight=boot+stop+splash (post # 3)
I flashed: Alltel_titan_20273_a2.rar . However, the result was the same as my original problem.
I skipped the .exe file that was in the list.
Then I flashed Nex_5054.8_Alltel_b3.rar and SUCCESS!!! It booted. (I did not install any of the CABs listed on the screen.) I can enter all of the menues. I don't know if GPS still works. The green LED flashes like it did when I could use the phone. (I can't use the phone now because I reactivated my old phone.)
I have not tried these other ROMs that are also listed:
Nex_5054_Alltel_b2.rar
Nex_5054_Alltel_spb'd.rar
Nex_Alltel_dcd_3.0.0.rar
Nex_Alltel_superBB_chick.rar
Before I do any more test-flashes, can anyone tell me:
#1) what additional information I should copy off my phone before I try these other ROMs?
#2) can anyone tell me the differences in the ROM that works and the ones that did not (so I know why Nex_5054.8_Alltel_b3.rar works)?
And #3) Does anyone have any suggestions before I proceed with testing other ROMs or try cooking my own again?
Thanks, in advance, for your help!

[Q] Bad flashing, plz help!

Hi all, i have a tricky one for you. MUCH respect to the one that can help me out with this one.
I belived my HD2 to be faulty and was to return it in for repairs. Having HSPL on the phone presented a problem so i tryed installing from SD card to remove it and restore the phone back to original ..... exept that didnt happen.
See, i didnt save my original rom back in the days when hspl showed up and apperently, you need to extract your original rom if you ever inteend to restore it to full original. So after some tries, with stock 1.48 and stock 1,66 i gave up and did a task 29, installed NRG rom and was back to normal ... OR so i thought.
The problem that started showing was a strange connection error.
"Dialer
cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings " some more text of non importense is displayed on there.
Thing is i lose the connection for like 1 second, it then shows this message and the connection is back again ... so i just press "Dismiss" untill it randomly will occure again now and then.
Now i tryed radio 2.10.50.19, 2.10.50.28, 2.12.50.28_2 with no luck.
I tryed to start with 1.48 stock installed from computer, then Task 29 with radio, then the latest NRG rom ... and some older. Nothing changes this thing, and the problem never occured before. I tryed just Task 29 and straight to NRG rom, nothing.
Plz plz if you have an idee, or think you can help, plz do, this is getting on my nerves, what if i never can save it!!!! ... oh my oh my
Best regards
Peder Nakazul Tjärnberg

Stuck on HD2 once again...

Hello!
My phone died few hours ago after crushing on YouTube app. Since I had energy ROM installed first thing i see after reboot is the energy logo on which phone get stuck. I tried flushing radio, flashing to stock ROM through USB/SD card, or even changing the SPL version.
I tried everything from here:
http://forum.xda-developers.com/showthread.php?t=632273&page=7
what should I do?
I SOLVED IT!! But why??
Then i changed a battery to my older battery and now it booted up.

[Q] Leo won't start after error during radio downgrade

Hi all,
first from all, take my apologies for my english.
Now back to topic, I have a serious problem with my leo (T8585). It was started to freeze from a few weeks, after I changed ROM, but allways i was able to restet it. And now it froze for good. The screen is black and any buttons are not lighting. At the begining when i have removed battery and put it back, i could feel vibration at start but the screen didn't turn on. After several attemps I was able to run the device. And then, when i have tried downgrade radio from 2.15.50.14 to 2.14.50.04, it has showed me a error at the begin of process (0% of progress). I restarted device, but now I don't feel even vibration at start.
What can I do with this? Any ideas? Please, help me
Niko666 said:
Hi all,
first from all, take my apologies for my english.
Now back to topic, I have a serious problem with my leo (T8585). It was started to freeze from a few weeks, after I changed ROM, but allways i was able to restet it. And now it froze for good. The screen is black and any buttons are not lighting. At the begining when i have removed battery and put it back, i could feel vibration at start but the screen didn't turn on. After several attemps I was able to run the device. And then, when i have tried downgrade radio from 2.15.50.14 to 2.14.50.04, it has showed me a error at the begin of process (0% of progress). I restarted device, but now I don't feel even vibration at start.
What can I do with this? Any ideas? Please, help me
Click to expand...
Click to collapse
What ROM did you flash? Maybe it is caused by a bug in the ROM..
Try another different ROM.
I test almost all ROM here, and Radio 2.15 is the best radio so far.
BTW, you need HSPL to flash a Radio or if you dont have HSPL installed, you have to flash the full stock rom.
Cheers

Categories

Resources