Related
OK!
The above ROM has been released and I believe many users have already downloaded it.
Just to check whether:-
a) any problme faced during installation? Is the upgrading procedure straight forward?
b) any problem upgrading from WAXX ROM to this UK ROM?
c) any problme faced during upgrading from i-Mate v1.72 to this UK ROM?
d) other problems encountered?
Thanks for your feedback
ive downloaded both and tried had no problems so far try using file from here
http://forum.xda-developers.com/viewtopic.php?t=12512
I will upgrade later tonight, and hopefully report back tomorrow
RE
Hi Hobbit!
What file and where's the link? :roll:
BTW, is the performance better than the WAXX ROM and the i-Mate v1.72 ROM?
Thanks
this link http://forum.xda-developers.com/viewtopic.php?t=12512
sorry was in different forum lol
I've uploaded ROMs here: http://forum.xda-developers.com/viewtopic.php?t=12528
yep tried em both. no real noticable difference to the unofficial 1.72 ive been using for months. Looks like its new device time as no hope of further updates - unless someone knows differntly....
I have upgraded, no problems.......everything works fine !!
:lol:
RE
Just one question.
Is this upgrade solely meant for UK users?
I'm from the asian side. I just can't wait for myxda to release its asian version.
Any problem with my asian telco operators here?
Thanks
I just upgraded my XDA II to the O2 UK 1.72.187 release. It all went well. I previously had installed the i-mate 1.72 ROM.
I had used Activesync to do a full backup prior to upgrading, and I restored it after the upgrade. After a couple of soft resets, everything seems OK, including the Widcomm bluetooth stack I previously had installed.
So, although early days yet, everything seems OK
Only downside - in my opinion
I was using the asian ROM version 1.60.44 for the longest time without any problems, I just upgraded to the UK ROM version 1.72.181 and the only downside I noticed, as of now, is that the clear type sucks, its just like the 1.72 of the i-Mate, of the 1.66 of the Asian O2. It was way better in the old ROM I was using.
Re: Only downside - in my opinion
ZeroXtreme said:
I was using the asian ROM version 1.60.44 for the longest time without any problems, I just upgraded to the UK ROM version 1.72.181 and the only downside I noticed, as of now, is that the clear type sucks, its just like the 1.72 of the i-Mate, of the 1.66 of the Asian O2. It was way better in the old ROM I was using.
Click to expand...
Click to collapse
Take a look at this thread: http://forum.xda-developers.com/viewtopic.php?t=9279
Thanks DCS for the link. My ClearType is A OK again now
My pleasure
Just upgraded to the image with blackberry version on a CPW xdaII runing 1.66 - result good
1st I backed up with version 3.7.1 of active sync
then I hard reset
then I closed all the programs and icons in the system tray
First it failed with usb left on the screen.
I did a soft reset and re ran the upgrade program again and all is well.
I am now restoring the backup, haha which worked except for a few files which I skipped, these were the same files that were skipped on a normal restore.
Now my destinator satnav is working and that is tied to the machine so all in ace
what have I gained, I don't really known, looking forward to the fax though,
where is it?
Simon
Additional download.
You will find it in the Fax software in the XDAIIAppSuite uploaded by The Hobbit in his post here: http://forum.xda-developers.com/viewtopic.php?t=12526
Re: Only downside - in my opinion
ZeroXtreme said:
I was using the asian ROM version 1.60.44 for the longest time without any problems, I just upgraded to the UK ROM version 1.72.181 and the only downside I noticed, as of now, is that the clear type sucks, its just like the 1.72 of the i-Mate, of the 1.66 of the Asian O2. It was way better in the old ROM I was using.
Click to expand...
Click to collapse
Do you try ClearType Tuner in this ROM, the file is cttune.cpl.CAB
I think it's another way to correct the cleartype problem beside the dcs' way? Is it right?
is there anyone got problems like mine?I stuck with SMS, i did send one sms to my number and it takes 4 hour to delivery it and when i go to sent box i didnt see any sms that i have sent???? do you knows that and can you tell me how to fix it?
From Inbox check Tools/Options/Keep copy of sent mail in Sent folder
As for the four hour delay - I get that sometimes - I put it down to O2 network.
OMG!!! T-Mobile have released Official WM6 ROMS UK NE DE AT!!!
Thread
There are a lot of people who keep asking for T-Mobile ROMs I was one of them. So this morning after someone else asking I have decided to post this in the hope it can be referred to!
CURRENTLY AVAILABLE DUMPED T-Mobile ROMs
UK ROM
UK ROM - With CustomRUU v4.3 felt kind so updated it for you all!
UK ROM - Windows Mobile 6 Test 3.60 - Radio 1.50
DUTCH ROM
CROATIAN ROM
GERMAN ROM
Edit from Sleuth255: We are not allowed to host ROMs here. Please post to rapidshare or some other site then link. I must remove these ROMs from our FTP due to an edict from m$ legal. Sorry
The UK one appears to have been built however I have not tested it, if someone has used it in the past please let me know.
I have not checked any of the others, if people have used them and they are built please contact me and I shall update this accordingly.
Please can someone update the Wiki for the UK ROM, thanks.
CURRENTLY AVAILABLE SHIPPED T-Mobile ROMs
HUNGARIAN
GERMAN
SHIPPED ROMS HERE
If there are anymore T-Mobile Shipped ROMS I have not mentioned please msg me and I will update accordingly.
Any chance of this thread being sticked?
Thanks, I think this is very helpfull.
Great! Always usefull when you need to restore your device
Has anyone tested if any of these ROMs flash properly.. for me it would be the Dutchversion then... But I can not test right now can not have my phone broken down. Once Kaizer is out I am going to buy that one and then I could test, but would be nice to know if these dumped ROMs work
Unfortunately I do not know, I haven't even tested the UK version as I am not sure if it will work, however I did update the RUU.
Shame we cannot emulate the firmware install!
The T-Mob UK dumped ROM isn't quite right - the w'n'w home page doesn't work properly.
Minor thing but, one of the first things I tested
I dumped my friends ROM the other day. I'm currently working on building it and testing it - will let you know when it's done
Cheers,
Smiffy.
Hmmm...humble pie - lovely
Well, after flashing the ROM i dumped the other day, I had exactly the same thing with IE.
It took me about 3 seconds to realise it must be because the extROM had been flashed by one of the WM6 ROMs I had been using in the past.
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Smiffy.
Lordsmiff said:
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Click to expand...
Click to collapse
How can I do that?
trapper said:
How can I do that?
Click to expand...
Click to collapse
Trapper,
I assume you mean how can you put the correct Extended ROM onto your device? If I understand this correctly, the ROMs mentioned in Jygar's first post are the original main ROM but the Extended ROM is in fact from a Windows Mobile 6 ROM (I do not believe that flashing a ROM will affect the Extended ROM - the problem is that the re-flashed (downgraded) WM5 ROM is starting the Extended ROM installation after the basic OS install (as normal) but that Extended ROM is still a WM6 one.
The page that is linked to includes many Extended ROMs from many countries and devices - one of them an original T-Mobile ROM (here) and if you were to unlock/unhide and mount your Extended ROM you would be able to delete the incorrect (WM6) ones and then paste in these original Extended ROM files.
The Extended ROM files are executed during a hard reset after the OS has been installed - details of how this works are within this forum. I am not sure that you need to do a hard reset but it all depends on whether you stopped the device completing a normal (complete) install. After a hard reset the device will start to execute the Extended ROM files/.cabs and if you stop that with a soft reset as soon as it starts then the device will re-boot with a basic WM build (with no service provider fixes/updates/customisations/settings)
If this is all explaining what you already know then sorry but your question posted is rather open... Hope this helps
ExtROM.nb attached Just put it into an NBH and flash
@tony.wheeler - What was the original radio version of your Vario II? I'm in the process of creating a complete upgrade to restore UK MDA Vario II's to their 'out of the box' state with the original ROMs (IPL, SPL, MainSplash, SubSplash, OS, Radio ExtROM)
Phil
eek, think it was 1.03?
[edit]Have done a search it appears it is 1.05!
only problem is this is HTC_BOOT 0106 and most ppl are now patched to 0108 so I would have thought we cannot downgrade our radio rom.
TBH 1.43 is the best radio rom out and i cannot say a bad word against it. I have only eva updated my radio rom and since the radio update have not had a problem with the origional t-mob os.
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
The dutch rom seems to be in *.raw files. How can i open of re compile it?
jm012a9749 can you upload it?
RaDeNRFX said:
The dutch rom seems to be in *.raw files. How can i open of re compile it?
Click to expand...
Click to collapse
Same question here.
Does anyone know how to use the .raw files...?
as its all t-mobile users on this thread, what radios are people finding the best? UK
Read, read, read...
wensing said:
Same question here.
Does anyone know how to use the .raw files...?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoReconstruct
fil said:
as its all t-mobile users on this thread, what radios are people finding the best? UK
Click to expand...
Click to collapse
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
jm012a9749 said:
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
Click to expand...
Click to collapse
Any chance of you posting this backup ROM? There are many of us who would be very keen to have this as a safety net for when we have to return our Vario 2s under warranty.
twelve47 said:
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
Click to expand...
Click to collapse
I too am running with Radio 1.50, after a short-lived update to WM6. I have had no problems at all with 2g or 3g, steady as a rock.
After trying several WM6 ROMs for my iMate JAMin (G4) I've gone back to WM5, as using this as a phone is my main priority, which every WM6 ROMs I tried, have failed to do.
Now I've got the RUU_Prophet_220734_2207114_024721_NVID WM5 ROM installed.
I'd like to know a few things:
1) Is there a better WM5 ROM than the current one I'm using
2) Is there any way to increase the free RAM? Is this Pagepool thing applicable to WM5 too? I get only 23.5MB free after a soft-reset
3) Can I get Office Mobile 6/6.1 installed in any WM5 ROMs?
4) Can i run HTC Cube in a WM5 ROM?
5) The HTC Network Wizard was a useful tool which I miss in WM5. Can it be installed & used in WM5? If yes can anybody give me the CAB for the same?
I had first posted all these questions in the 'Prophet Upgrading' section. But haven't yet received any proper answers. It seems all smart guyz are busy over here
So I hope for some ans at least now. Thanks in advance guyz....
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Ok, i suspect this has been asked a million times before.... Yeah i've been to raph wiki... Just want to clarify things, its too much info and i want to know if i get everything right. Please help me get my head around this if you can.
My phone:
Vodafone HTC Touch Pro (factory not SIM-locked)
CE OS build 19945.1.2.3
Rom version: 1.90.161.5 WWE
Date: 09/03/08
Radio: 1.02.25.19
Protocol: 52.33.25.17U
I have HardSPL'ed my phone successfully. If i want to flash another RAPHAEL radio i dont need to do anything else. "Security" unlock is only needed if non-raphael radios need to be flashed (such as diamond?)?
Do i replace current Vodafone rom (besides radio)? Is there a good reason to do so ? If so, which one and why ? Not interested in software overload, but prefer to have Touch Flo and as much speed as possible. I have read that t-mobile Vario4 roms are extremely bad, cant say this about Voda, but what do i know - i only owned HTC s710 (Orange SPV E650) for a year or 2. (flashed it to WM6.1 myself, came with 6.0)
How do i unload contacts, software,games off the s710 to my TP ?
So much questions. Please bear with me.
Thanks for your time.
To answer your rom question, the newest roms are version 5.05 instead of 1.90. I have an unbranded tp so I just installed the official 5.05 and no custom one. But if you're looking for speed you should check out energyrom 2.0 I guess. Your contacts can be easily ported from s710 to tp using outlook. Use activesync to sync your 710 contacts with outlook and then sync outlook with your tp. I've done the same with my old s620 and it's the only way I've found that works. There are programs in which you can backup you contacts (such as sktools) but from smartphone to ppc it doesn't seem to work.