Qteck S200
WM 6
IPL 2.21.0001
SPL 2.20.0001
GSM 02.61.21
OS 4.0.0.0
ROM 4.0.0.0 WWE
ExtROM 4.0.0.0.3a PDAViet
___________________________
Wich WM 6.1 would you recomend me to use?
I would like to know how do i install that rom because i've tryed to install a lot of WM6.1 and..."nothing", i don't know if i'm doing that wrong or not...so i need your help...PLEASE HELP ME
Thank you
Related
Fellows,
I'm still having the same problem with TodayAgenda (frozen) and also can't update the patch cuz sync hang up trying to connect the Agenda. I flashed twice and nothing changed. Any other rom for G4?
This is what I've got:
HTC 8125 - CID unlocked
Ms Sync 4.2
faria-htc-wizard-aku3.3-page-pool-8mb
Rom Version : 3.3.0.0
Radio Version : 02.44.11
Protocol Version: 4.1.13.22
ExtRom Version: faria V4.0
IPL 2.26.0001
SPL 2.26.0001
Any Advice
hi!
I'm thinking in upgrading my Prophet but I have some last questions to make before i go for it ( i don't need a new brick...)
My current version are:
Rom 2.10.7.24 PTG
Radio: 02.07.20
IPL 2.10.0001
SPL: 2.10.0001
This is a G4, right?
Flashing with one of the wm6 rom's (touch VII for example), woundn't I have problems with CID lock? (my original rom is in portuguese).
After flashing it I'll be able to downgrade to the version:
IPL: 2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.29 PTG
EXTROM: 2.20.7.109
Thanks in advance for your patience
Note: I've read a lot of post's and the WIKI too, but i didn't get clear answers to this questions.
xkalibur said:
hi!
I'm thinking in upgrading my Prophet but I have some last questions to make before i go for it ( i don't need a new brick...)
My current version are:
Rom 2.10.7.24 PTG
Radio: 02.07.20
IPL 2.10.0001
SPL: 2.10.0001
This is a G4, right?
Flashing with one of the wm6 rom's (touch VII for example), woundn't I have problems with CID lock? (my original rom is in portuguese).
After flashing it I'll be able to downgrade to the version:
IPL: 2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.29 PTG
EXTROM: 2.20.7.109
Thanks in advance for your patience
Note: I've read a lot of post's and the WIKI too, but i didn't get clear answers to this questions.
Click to expand...
Click to collapse
Your device is G4, your right.
About the possibility to downgrade: yes you can, but you will need a NoVendorID edition of your preferred ROM. With the update to WM6 the VendorID will get lost. If you reflash to your original ROM afterwards, the RomUpdateUtility will check for this VendorID and will not find it, so it will stop operating.
This has nothing to do with technical stuff, but everything with marketing stuff. With this method the vendors are trying to prevent that f.i. Orange customers will upgrade with T-Mobile ROM's.
It is rather simple to workaround this minor inconvinience. Just download a appropiate NVID RUU somewhere, ans exchange the nk.nsb file with your preffered ROM. Now the RUU won't check the ID and will reflash your device just as you wanted it!
Is it safe to upgrade to wm6 or wm6.1 with that ipl??
I got it with the latest wm5 rom for mda vario with aku 3.3 .
EDIT: Succesfully instaled wm6.1
rofl
Hello;
I would like to return to the originel IPL /SPL for the K-jam G4, I find some originel IPL/SPL in the forum but I did not found the originel of the K-jam.
Any idea !
________________________
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.2.xxx (Build 19199.1.0.0) SNN WM 6.1
ROM: 2.18
Registry AKU: .1.0.0
Radio: 02.25.11
Protocol: 4.1.13.12
essultane said:
Hello;
I would like to return to the originel IPL /SPL for the K-jam G4, I find some originel IPL/SPL in the forum but I did not found the originel of the K-jam.
Any idea !
________________________
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.2.xxx (Build 19199.1.0.0) SNN WM 6.1
ROM: 2.18
Registry AKU: .1.0.0
Radio: 02.25.11
Protocol: 4.1.13.12
Click to expand...
Click to collapse
Just follow the method explained in the guide 'How to remove HardSPL' and you can use any Official IPL/SPL to flash back to G4 ipl/spl and download the official k-jam stock rom and flash to revert back to wm5.
OK for removing HardSPL but rom upgrade not possible.
thanks for your reply.
I succed to remove the Hard SPL but putting Vodafone IPL/SPL, the K-jam reboot after normally and showing :
IPL 2.17.0001
SPL 2.17.0001
but upgrade with originel K-jam rom is not possible.
I succed to have the The colored screen but RUU show this error ;
____________________________________________________________
ERROR [296] upgrade only the nbf can not be used for your pda phone
please get newer nbf file.
____________________________________________________________
please advise.
i want remove hardspl & want to restore original what was there!
-i read your thread How To: Remove HardSPL
http://forum.xda-developers.com/showthread.php?t=342744
-now fact is that i didnt buy kjam(wizard device) from any operator.
in india you have two type of mobile
one which are with operator (called cdma)
other which u can buy from market & insert any sim into it.
mine is 2nd device (which u can buy from market & insert any sim into it.)
-orginally hardspl was 2.16.0001
i want to restore it back it imate kjam!!!
i have downloaded rom from imate site also!!! but i tried to installed it failed as my hardspl is like:-
The IPL version 2.21.0001 and the SPL 2.21.olip
-so question is that in your post How To: Remove HardSPL do i need to download any of below said things
what should i replace in .nbf file as none of attachment belongs to be.
pls answer soon as i have only 1 week left in my waranty period of repair/replacemant!!
i cant find G4 IPL&SPL for my k-jam on that page what do i must to do????whare can iafind it please help me soon.
mp1368 said:
i cant find G4 IPL&SPL for my k-jam on that page what do i must to do????whare can iafind it please help me soon.
Click to expand...
Click to collapse
I know it's late now and this is more of a warning, but people should make IPL/SPL backup with WST before applying the HardSPL because they can be used later on to restore the phone to original condition. I have done it myself with a friend's G4.
Well, this is soo strange. The problem is this:
1- I upgraded to Shato Touch 1.0 (WM6) before.. Worked fine
2- I decided to upgrade to Wm6.1 - Cloudyfa Touch Edition 2.0, so i did a clean PVTemp install and now i have
IPL: 2.13.0001
SPL: 2.20.0001
Rom Version: Qtek 2.20.7.34 WWE
Radio Version: 02.47.21
Extrom: 2.20.7.114
4- Now the problem: Ive tried every tool on the forums. Every tool to Hard SPL it. Everytime it just reboots after all process, and the IPL / SPL numbers stay the same. As i figure from the forums: they should turn to 2.G4.4PDA or 2.24.opil, But they remain the same?
Please tell me what to do? I mean i really want to upgrade to 6.1, but icant fugire out what s the problem
c0d3r said:
Well, this is soo strange. The problem is this:
1- I upgraded to Shato Touch 1.0 (WM6) before.. Worked fine
2- I decided to upgrade to Wm6.1 - Cloudyfa Touch Edition 2.0, so i did a clean PVTemp install and now i have
IPL: 2.13.0001
SPL: 2.20.0001
Rom Version: Qtek 2.20.7.34 WWE
Radio Version: 02.47.21
Extrom: 2.20.7.114
4- Now the problem: Ive tried every tool on the forums. Every tool to Hard SPL it. Everytime it just reboots after all process, and the IPL / SPL numbers stay the same. As i figure from the forums: they should turn to 2.G4.4PDA or 2.24.opil, But they remain the same?
Please tell me what to do? I mean i really want to upgrade to 6.1, but icant fugire out what s the problem
Click to expand...
Click to collapse
................go for 1d, no hardspl is required.
haha! Ive been trying to hard spl for abt 1 month now.. with breaks of course, whenever i got time... but as soon as i posted it, it worked!
I ran the hardspl.bat in the Upgrade_HardSPL_G4 folder... not the nvrom setup.
ANd it worked! Its showing 2.0.G4.4pda .. and i just installed wmtouch 2.0 edition (cloudyfa ).
Well, this is a odd, but thanx a bundle Ill do the 1d method when i plan to change roms again