Flashed to latest official ROM
1. The voicemail line if gone from the today screen, and I can't find any way to get it back
2. The ForceOffSSL registry trick to get comcast email to not take forever no longer works, and breaks email completely
3. Using a hacked HTC hone dll to get weather for a custom city locks the phone up completely. How do you get custom weather?
Also, anyone have a link to the previous ROM, the last WM6 one before the 6.1 update? If I can't get these issues fixed, I want to flash back
I would try to uninstall the HTC Home can and re-install it. As for the Office workaround, I would call Comcast and ask for the exact exchange settings and let them know that you are trying to access your E-mail through your PDA phone. Sad to say you will probably just get some idiot reading out of a book so good luck with that one. You may need to tell them that you ahve a "tier 2" problem. ou may have already tries this stuff but it's a good place to start.
emkorial said:
3. Using a hacked HTC hone dll to get weather for a custom city locks the phone up completely. How do you get custom weather?
Click to expand...
Click to collapse
You use HTC Home Customizer to add a custom city for weather... not a hacked DLL...
I entered in my city using HHC, and it doesn't work.
I'm using the same comcast settings that worked with WM 6.0
What about the voicemail indicator?
You need Voicemail Today plugin. Here.
Got the cab installed, Voicemail is back
I explicitly declare dthe ports for my incoming and outgoing COmcast mail servers, and now the regfix works, so that problem is fixed.
Only issue left is weather. It doesn't work. I have the latest veriosn of HHC, I went into the weather page, switch it to a custom database, put my city, state, country, and zip code information, and it doesn't work. "Unable to retrieve data for selected city"
How do you get weather on WM6.1? I tried the hacked DLL method, but that bricks the phone.
Related
Can anyone offer some suggestions to get my SMS and MMS back up and running?
I tried the HTC Network Config but that didn't seem to have an affect on anything.
I will attempt some of the cabs that seem to apply. Are the cabs/settings specific to regions and devices?
wish I could help, mine is doing the same thing. Of course mine locks up constantly too. Been too busy to get to the AT&T store lately, but I'm taking it back tonight to exchange it for a new one. Hopefully it's just a hardware issue on mine.
Thresher said:
Can anyone offer some suggestions to get my SMS and MMS back up and running?
I tried the HTC Network Config but that didn't seem to have an affect on anything.
I will attempt some of the cabs that seem to apply. Are the cabs/settings specific to regions and devices?
Click to expand...
Click to collapse
I reflashed my ROM back to stock and I still had no SMS. I tried the HTC Network Config but that didn't work either. I ended up going into the phone settings and seeing a weird number for the Text Messages Service Center so I change it back to +13123149810 around 15 minutes later I somehow sent a sms out. MMS too.
So I think the HTC Wizard or the Stock rom may not change that phone number or it does change it, but to the old blue number.
I am going to flash a new rom today and see how it goes.
Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.
Hey all, i originally posted this problem in January, still no fix.
Wondering if any of the new folks to the forum have any suggestions.
I am using an unlocked TG01 from Orange (UK) on Rogers in Canada (GMT -5), using the official 6.5 ROM. CE OS 5.2.21840 (Build 21840.5.0.60)
My SMS messages recieved are logged 5 hours behind current time. My SMS messages sent are logged at the current time. My suspicion is that it has to do with the origin of the phone, from the UK.
I have searched xda forums and modaco forums, microsoft, and google.
I have total commander, and have modified the registry in a few was, as described below:
I have added the TrustTimeZoneField field dword (in HKLM\System\Phone Settings\OEM ... or whatever it was.)
I have modifed HKLM\Time Zones to include Eastern Standard Time with the proper TZI file.
I have tried to set the timezone to another setting (like GMT -3) reset the phone, and then change it back, and it doesn't not work.
I have download a cab file that was supposed to fix it too.
I am looking for any other ideas, please, and thanks.
Rogers Canada Connections Settings
I followed rogers settings I found on from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
Settings: I followed this from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
source site:modmymoto, forums, thread 17207
Could you provide a direct link to that thread? I'm not able to find it.
ya i got the same problem but with the topaz
Anyone out there got a "new" fix?
Rogers settings
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
that_dood said:
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
Click to expand...
Click to collapse
Thanks for the reply. I applied the cab, soft reset, test SMS has the same problem. Time sent 2:16am, time recieved 10:16pm
Bump...........
mms
Did you ever get your mms working?? I got mine going with this http://www.stephenwagner.com/?p=33
New IMPROVED CABS HERE
*********
WM6.5 and now WM6.1
*********Install on Fresh OS
Tested and flying on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K].
This time i have made single cab[sipConfig.cab] with Schap`s voip setup inbuilt. Hopefully 3g option will work with this cab as i have changed few settings. Tweaked is home screen item selection[select thru Available and selected to make cellular call or sip/voip call{one have to use classic home screen to do this}]. This cab is GSM codec based unlike previous cabs hence very low bandwidth is required to place calls, Can be used to make calls over GPRS but not sure. Quality of calls is .99/1 and no dropouts and one can call as long as credit available in account. What else, as this cab will integrate into phone system, it is very easy to use with addressbook, etc. I have attached audioswitch out file which if installed comes into action[can hear from earpiece] 13 seconds after phone window is active on screen, doesn`t matter calling or recieving. I have also attached SRS file just in case if someone hear less/low volume from earpiece just follow the instructions attached. Also attaced is Wifi always on file which some HD2 users need. Also 5060 port has been enabled in these cabs but you may need to forward 5060UDP port in your router for possible two way communication. Hopefully you guys like this cab, Please leave comments and suggestions. Thanks
Credits to developers.
*Most of the bugs has been fixed discussced in previous cabs.
Previous Cabs can be found here
--------------------------------------------
UPDATE : 1
DIAL PLANNew cab[sipConfigDialPlan.cab] with jaaps Dial Plan inbuilt. Both sipConfig(setupVOIP) and DialPlan can be accessed from Start Menu. Now one have the option to install with or without dial plan. Thanks
UPDATE : 2
GPSNow there will be no problem when using GPS [File Updated]
UPDATE : 3
START MENUOnly one instance of voipSetup shortcut in start menu
UPDATE : 4
WM6.1 SUPPORTNow WM6.1 OS supported just choose the cab with WM6.1 written in it, others are for WM6.5 OS.
UPDATE : 5
VOLUME INCREASE Tip By: angusc Thanks Now one will be able to hear bit loud sound either from back speaker or earpiece.
UPDATE : 6
OTHER CODEC SUPPORTNow all major codec supported ie: G.711 a-law, G.711 u-law, GSM codec.
--------------------------------------------
*RECOMENDED INSTALL LOCATION : DEVICE*
*DO NOT INSTALL ALL CABS, JUST INSTALL ONLY ONE YOU WANT*
*IF NOT WORKING OR GIVES YOU ERROR, THEN ITS OPERATING SYSTEM LIMITATION*
*DO NOT INSTALL WM6.1 CABS ON WM6.5 OS AND VISE VERSA*
*AudioSwitch.cab/WifiNoStandby.CAB/Tested SRS.rar cabs are OPTIONAL and can be installed on both WM6.1 and WM6.5 OS*
Will you eventually release a dialplan supported version? I know this is a nitpick but I really use that file alot.
Yes, working on it. But will take time as hard to get time off. Thanks
Any reason why I can't install this...
Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
try installing remove certificate or first cab in Tested SRS.rar attached to get rid of this warning. are you installing on fresh OS. Thanks
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
cu2cool said:
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
Click to expand...
Click to collapse
I think you are slightly confusing things, with voip you can make calls from anywhere as long as you have internet access. Now the free bit is different, you must have a voip provider and their fees may vary. Now if tmobile is giving away voip subscriptions with their wireless then I need to find out about that, but I have never heard of it!
@dhillonbros - Much love for working on this!
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
cu2cool said:
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
Click to expand...
Click to collapse
are you sure that its an integrated solution
No, I'm not sure. That's just what it looks like. There's a whole thread for it here http://forum.xda-developers.com/showthread.php?t=508715.
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
I installed todat without any errors. T-Mobile UK. The phone picks up my SIP landline service number but in the today screen after the no. it states no service.
I also appear to have two copies of the same software listed in my programs one called SetupVOIP the other sipConfig. Both on clicking setupvoip.exe
the dialer option page is blank.
looking forward to dumping fring but need a wee bit of help to get over the last hurdle.
this build is working better than older version on my Tilt. The issues I have are the dial plan, but I fixed that by editing the ipdialplan.xml file and removing all the number nines in it.
Second issue is that it looses registration after a while. I'm using AT&T 3G. Later on it is registered again but on and off throughout the day.
Installation ok but no voip on HD2
Hello,
The instalation is gonna well, but i have only the configuration tool, no additional items in today screen or phone menu, how can i switch between voip and standard calls?
br
nobisz
The configuration tool is used to set when your call will go through voip ("never", "whenever available", ...). From there it works transparently. For example, if you set to "whenever available" all calls will go through VOIP if it is able to register to the VOIP service, otherwise they will go through your cell network.
in the configuration tool, should I select TCP or UDP? I am using 3G
cesierra said:
in the configuration tool, should i select tcp or udp? I am using 3g
Click to expand...
Click to collapse
udp is the best option
@amcclean : Please try new cab. Problem fixed
interlope said:
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
Click to expand...
Click to collapse
Mines flying on HD2, same as registrar server.
In Polish version of WM 6.5 you shall add "telefon" in command.txt file (Program Files/audioswitch) for the AudioSwitch to work....
EDIT: 11:15pm 9/25/2012 - ISSUE RESOLVED, SEE BOTTOM OF POST FOR SOLUTION
Okay, relevant information first:
Evo 4G LTE on Sprint
HBOOT 1.15 S-ON HTC DevUnlock
Current ROM CM10 Nightlies
Sprint-Google Voice integrated number
Now for the issue:
Texts can not be sent through the messaging app. When attempting to send a text, it will say "sending..." for a few seconds, then I get a notification saying "message not sent". Clicking on this notification takes me to the messaging app where the failed message has a red triangle next to it. When I long press the failed message, it comes up with a menu, and when I click "view details" it says "Error Code 98".
This happens both when connected to WiFi and when not connected to WiFi. It also happens both in my home town, and another town 45 minutes away (meaning the issue doesn't seem to be with the particular tower).
The last successful text sent or received was on Sept 13th.
Calls still operate as normal.
No changes were made by me between when my SMS was working properly, and when it stopped working. (Same ROM, Recovery, Kernel, etc). I haven't downloaded any SMS apps (handscent, gosms, etc) that could be interfering with the messaging app. I DO have the Google Voice app, but I had that when SMS was working properly as well, and the GV app hasn't been updated since March (meaning it shouldn't have changed how it was behaving).
Other peculiar behavior:
In addition to not being able to send texts via the messaging app, it seems that my number is also unable to receive texts. When texts are sent to my number, my phone does not receive them and they also do not show up in my Google Voice inbox. The sender is given no notice that the text has not been received. I am able to send texts from the Google Voice app, and others successfully receive them. When I send a text to myself from the Google Voice app, I receive it in my Google Voice app, but not in the stock messaging app (even though my Google Voice app settings say that texts will be received via the messaging app).
Things I've Tried (Updated: 3pm EST, 9/25/2012 ):
* Turning it off and on again
* Updating CM10
* Changing Google Voice settings (though it's possible I overlooked a setting)
* Factory Reset, Reflash ROM
* Flash Sense ROM, Update Profile/PRL
* Flash different AOSP ROM (Paranoid Android)
Things I've Not Tried (in order of how willing I am to do the things):
* Using an alternate SMS app (GoSMS, Handscent, etc)
* Un-integrating (and Re-integrating) Google Voice
* Giving the EvoLTE a relaxing bubble bath, to calm it down
* Flash Stock, Unroot, Update Radio
So, does anyone know what might cause this problem, and/or how to resolve it?
EDIT: Solution below
STORY:
I called Sprint Support, and had them reactivate my old phone (Evo4G running a CM9 alpha), by giving them the MEID for that phone. At this point I powered the phone back on, and called an activation number that they had given me (888-546-0314). On a Sense ROM, I would have simply updated my profile, instead of calling the number. We then tried SMS on the reactivated phone, and it worked (also, texts began showing up in Google Voice again at this time). I turned off my Evo 4G LTE, then I gave him the MEID for it and had him switch my number back to that phone. After he said he had switched it, I powered the Evo 4G LTE back up, and updated the profile, which I was able to do since I was still on Viper4G (note: I had to update the profile via WiFi, it might have worked over data, but it was taking longer than expected so we cancelled and just use WiFi for the update). Once the profile had updated, I called the test number again to confirm that the phone was activated. When I tried SMS, it worked as it should, including sending a copy to Google Voice.
TL;DR:
1. Find an old phone
2. Write down the MEID of both phones
3. Find a third phone to use to call Sprint (since you'll be activating/deactivating the other phones throughout the call)
4. Call Sprint Customer Support (888-211-4727), and punch the appropriate numbers until you are talking to someone
5. Have them switch your number to the old phone's MEID. Make sure the old phone is activated.
6. Have them switch your number back to the new phone's MEID. Make sure the new phone is activated.
7. Texting should be working on your new phone again.
Notes: The old phone may not be necessary. It may be enough for the Sprint Service Rep to deactivate your phone and then reactivate it. But I figured I would write out the EXACT method that solved the problem for me, since I am positive that this method has worked at least once. I have neither the means nor the desire to recreate the problem, so I will have to leave testing of other methods to the next person that experiences this problem.
Update: Clean flash of Paranoid Android did NOT resolve the issue. Still getting "Error Code 98".
So, this tells me/us this is not an issue with CM10 (which is not surprising, since I have no idea how what ROM I have flashed would keep Google Voice from receiving the texts as well).
This may sound odd but try moving the time up an hour or back an hour, error 98 is a problem with home agent, it's a sprint network error. I don't know of anything else that's helped
Try calling sprint and ask them if they can do anything. When I went s-off I had to call them bc my calls and text had errors. Data worked though.
They pushed something that fixed it in less than 10 seconds. Just wanted me to verify my account.
I tried changing the time 1 hour forward, and 1 hour backward, neither of those resolved the issue.
On hold with the Sprint tech department (it's taking longer than 10 seconds, but hopefully they figure out how to fix it.)
EDIT:
Mini-Update: Flashed Viper4G (a sense ROM), problem persists.
Updated profile and PRL while in Viper4G, problem persists.
Was told by Sprint technical support to press ##6-digit-MSL-here# and edit something, then reboot. Did that. Problem persists.
SOLUTION
The problem has been resolved, and the OP has been edited to include the method used to solve the problem.
If this was a game, Anthonicia would win for being closest (though it took closer to 2 hours on the phone with Sprint to fix the issue, if we include all four calls I made, 20-30 minutes if we only include that final one).