Related
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
Hi,
I have a touch dual running 6.1 which I unlocked but installed the incorrect radio back onto so now it doesn't ring.
After unlocking I upgraded sspl 1.16.exe and now have spl 1.16 hard which won't let me install the radio version I need 1.58.16.27 (this version is running on another phone with the same set up but is locked.)
I have seen with on these pages instructions like run uspl then spl1.15 but these don't seem to work for me. I flashed the rom but still have spl 1.16 hard although I am informed that the device is "Test only not for sale" on boot up.
Is there a sure fire way of downgrading or is there a way of reinstalling the correct radio in spl 1.16.
Am I doing something completely wrong. Thanks for any and all information.
b1968 said:
Hi,
I have a touch dual running 6.1 which I unlocked but installed the incorrect radio back onto so now it doesn't ring.
After unlocking I upgraded sspl 1.16.exe and now have spl 1.16 hard which won't let me install the radio version I need 1.58.16.27 (this version is running on another phone with the same set up but is locked.)
I have seen with on these pages instructions like run uspl then spl1.15 but these don't seem to work for me. I flashed the rom but still have spl 1.16 hard although I am informed that the device is "Test only not for sale" on boot up.
Is there a sure fire way of downgrading or is there a way of reinstalling the correct radio in spl 1.16.
Am I doing something completely wrong. Thanks for any and all information.
Click to expand...
Click to collapse
Don't worry buddy, just flash a rom with a radio, or flash another radio and your device will ring again, for Niki roms with radio take a look HERE
Goodluck,
Worked a charm
Thanks for taking the time.
Ben
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
mrachni said:
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
Click to expand...
Click to collapse
Reinstall previous stock ROM.
But how? Where to find it?
I must do that from SD card if i understand?
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
No, you can flash it over ActiveSync.
About stock ROM; with aria ROM do you have? do you have a branded device?
SPL - 3.03 and ROM 3.14... Affecting installation for W7?
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Innvizible said:
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Click to expand...
Click to collapse
Ass for I know, to be able to install WP7 ROM on your HD2 you will need HSPL. And probably you know it already, but stock ROM 3.14 isn't compatible with HSPL, so yes you need to downgrade your stock ROM before.
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
similar problem on my HD2
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
tazeemn said:
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
Click to expand...
Click to collapse
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Innvizible said:
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
Click to expand...
Click to collapse
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
kurt-willems said:
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Click to expand...
Click to collapse
You are right about that. I stand corrected. This was proven through my tests yesterday. In the past, with my Athena, it worked differently.
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
2.07.50 also worked fine for me for WinMO 6.5 (Energy), Darkstone SuperRam 1.5 and WP7. In fact WP7 NAND & Darkstone from SD ran fine with MAGLDR112.
Updated Radio solved problem
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
Worked like a charm. I put on Leo_RADIO_2.15.50.14** from one of the threads and from then on I then put back SPL-2.08HSPL and then loaded MAGLDR112 and it allowed me to access bootloader and from there I loaded the DWI file for Windows 7. Everything became kinda self-explanatory after following your help... Awesome, Windows 7 rocks... Off to activate the live services...
Hi all, I've been running HSPL and Stock ROM 3.14.405.2 on my UK T-Mobile HD2. I needed HSPL as its a generic ROM.
I decided to try a cooked ROM (Artemis), which required the removal of HSPL. I extracted "RUU_signed.nbh" from the 3.14 ROM, renamed it to "leoimg.nbh" and stuck it on my SD Card, before resetting and pressing the down volume. It rebooted, asked if i wanted to continue with the installation, and then reset halfway through.
I'm now getting "Upgrade ROM code error. Please Try Again" and sometimes a grey screen with red numbers "00028002" at the top.
I've tried installing a standard 3.14 ROM again, and a 1.66 ROM, but both say they are unable to communicate to the phone.
Any ideas would be greatly appreciated please - I'm gonna have to crack out my Nokia N70 back up soon!!
What haoppened is that when you ran the 3.14 update from sd card, because HSPl was installed it allowed it to start flashing even though its not for your phone. (As hspl should indeed do).
Problem is that step 1 of the update process is to replace the spl(hspl) and instal spl 3.03.0000. The phone then reboots into the new 3.03.0000 bootloader and flashing continues. Except it doesn't, because hspl is no longer there, so your phone rejects the 3.14 rom and you get rom update error and are left with spl 3.03.0000 and no way to apply a 3.14 rom.
Had you tried to flash that rom without hspl, it would have simply failed and done nothing.
The 1.66 rom didnt work because it is an unbranded rom, and you have a branded phone.
You need a t mo uk rom, and you dont need to use sd card, you can flash over usb from bootloader and it will downgrade spl from 3.03.0000 and hspl2 will again work.
Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
if you would read the install instructions on the first post of the Artemis ROM;
1) you didn't need this thread.
2) you saw the step by step guide on how to do it (available in 3 language!!)
samsamuel said:
What haoppened is that when you ran the 3.14 update from sd card, because HSPl was installed it allowed it to start flashing even though its not for your phone. (As hspl should indeed do).
Problem is that step 1 of the update process is to replace the spl(hspl) and instal spl 3.03.0000. The phone then reboots into the new 3.03.0000 bootloader and flashing continues. Except it doesn't, because hspl is no longer there, so your phone rejects the 3.14 rom and you get rom update error and are left with spl 3.03.0000 and no way to apply a 3.14 rom.
Had you tried to flash that rom without hspl, it would have simply failed and done nothing.
The 1.66 rom didnt work because it is an unbranded rom, and you have a branded phone.
You need a t mo uk rom, and you dont need to use sd card, you can flash over usb from bootloader and it will downgrade spl from 3.03.0000 and hspl2 will again work.
Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
Click to expand...
Click to collapse
Thanks for the response - I thought something along those lines had happened, so I've gotten TMobile 1.72 from the HTC site.
Ive extraced RUU_signed and renamed it to leoimg, and stuck it on the SD Card. My problem is now, when i boot with the volume held down, It just says "Upgrade ROM code error. Please Try Again" still. It doesnt seem to boot from the SD. Am i missing something or is it totally ballsed?
EDIT: After formatting a different card and trying again, it's working. Wiping now....
As for this goldcard stuff, i assume there's plenty of threads to do that?
samsamuel said:
......Only way, the ONLY way, you can get a 3.14 rom onto your branded hd2 is goldcard. running it as you did with hspl causes instability and only 200 and odd meg ram, with only 50 meg free.
Click to expand...
Click to collapse
Ahhhhhh, that'd explain why performance with 3.14 has been totally rubbish. I had no idea hspl had an overhead like that. Goldcard it is then......if i ever get it working
its not hspl with the overhead, its an incompatibility between the rom and the spl. If you put 3.14 rom on there and then remove hspl leaving say 1.66.0000, you still get the same issues.
As for goldcard, theres a goldcard request thread in rom dev section, post a cid there and ill make a batch of images up later this evening.
samsamuel said:
its not hspl with the overhead, its an incompatibility between the rom and the spl. If you put 3.14 rom on there and then remove hspl leaving say 1.66.0000, you still get the same issues.
As for goldcard, theres a goldcard request thread in rom dev section, post a cid there and ill make a batch of images up later this evening.
Click to expand...
Click to collapse
I see, got it now. I've posted on there earlier, so i look forward to your help. Thanks a lot
kurt-willems said:
if you would read the install instructions on the first post of the Artemis ROM;
1) you didn't need this thread.
2) you saw the step by step guide on how to do it (available in 3 language!!)
Click to expand...
Click to collapse
All valid points, but not very helpful seeing as this is a thread requesting.....help.
Alright guys so I'm trying to install a custom rom but I' m stuck because I cannot even get hspl installed.
I have an AT&T Titan and am using a selfmade y- cable and to gold card. I flashed the OSPL 2.5 via goldcard and it worked with success, next I ran HSPL Wizard and it said that hspl installed correctly but when the device rebooted hspl wasn't installed.(Picture 1)
So I'd tried reflashing the stock Rom"IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE" to redowngrade the Spl and it flashed with success!(Picture 2)
The problem now is that even after flashing the stock rom the spl is still "2.5" when it should be "1.10"(Picture 3)
So my question to you fine gentelmen is, "Does anyone know of a way to get my spl to change?"
Thank you all in Advance!
Also now when I try to gold card anything other than a signed Cingular rom my device shows loading... the card reader flashes a few times, and then it jumps staight back to the spl loader mode?(like pic 1 and 3)
I haven't done it yet, but I am when my cables get here, but I have read the ENTIRE thread of Gold Card and DFT's HSPL for 2nd Gen devices, so I'll take a stab at it first.
you said I flashed the OSPL 2.5 via goldcard and it worked with success,, the OSPL is the original SPL when you need to bring it back to stock for warranty reasons. But that doesn't explain as to why your pics say that you SPL is 2.05 either. From my reading, if your SPL is now 2.05, you can flash HSPL and custom ROMS.
I would flash the SPL again, using the SPL not OSPL.
I'm sure you did that initially and just typed it wrong or I'm misunderstanding you.
Yeah I actually meant just the spl that came with dft's hspl.
i'm in the process of rewiring my y-cable and trying to start fresh!
Will post the results!
Thanks for replying though man!
I managed to get back my spl to 1.10 from 2.6 (from the recent HTC update), by flashing the stock rom twice. This was coincidental, while I trying to get the internet sharing to work with my att titan 1 (there is a thread for this in this forum)- This how I did it: flash stock cingular rom, then forced cab update to 8107; booted phone then reset while booting up switched it again to spl mode to reflash stock cingular rom second time then forced update cab update again to 8107, following this i did a factory reset. After all this long drawn process I didn't get the internet sharing to work but for some reason it did downgrade spl from 2.6 to the original 1.10
BTW, my att titan is now unbranded, flashed with european stock rom using goldcard with spl 2.5
Same Issue here.. except I'm on the 2.5 that came with DFT's folder.. I can only flash the AT&T .nbh nothing else
I can't even get to 2.6 (HTC update). stuck on 2.5
habnzrot said:
I managed to get back my spl to 1.10 from 2.6 (from the recent HTC update), by flashing the stock rom twice. This was coincidental, while I trying to get the internet sharing to work with my att titan 1 (there is a thread for this in this forum)- This how I did it: flash stock cingular rom, then forced cab update to 8107; booted phone then reset while booting up switched it again to spl mode to reflash stock cingular rom second time then forced update cab update again to 8107, following this i did a factory reset. After all this long drawn process I didn't get the internet sharing to work but for some reason it did downgrade spl from 2.6 to the original 1.10
BTW, my att titan is now unbranded, flashed with european stock rom using goldcard with spl 2.5
Click to expand...
Click to collapse
I reflashed the stock rom, and tried cab update to 8107 but when I run cab sender tool it finishes "restarting your phone..Error: System.Exception: Firmware Device is null at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List' 1 updates, UpdateType type)
at wm7update.Program.Main(String[] args)"
Never used cab sender so I have no idea what this means.
Sorry mate, I can't help you with that error. I haven't had any problem with cab sender with stock cingular rom. Try to search the other forum re cab sender. I wonder if this is to do with the DFT 2.5 spl. Why not try to debrand your att titan using the goldcard method? this might be the long process if you can't get the cab update going.
Now I'm stuck on 7720 .. CabSender Doesn't work (null Firmware)... Can't Flash Europe 2.05 rom using GoldCard... I'm stuck with 2.5(DFT) SPL even when i try flashing the SPL 2.6 from HTC or the HSPL from DFT.... Whatever SPL they made or got it from..... It won't upgrade/downgrade.
This is Nice...
IronMan1289 said:
I reflashed the stock rom, and tried cab update to 8107 but when I run cab sender tool it finishes "restarting your phone..Error: System.Exception: Firmware Device is null at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List' 1 updates, UpdateType type)
at wm7update.Program.Main(String[] args)"
Never used cab sender so I have no idea what this means.
Click to expand...
Click to collapse
I believe it has something to do with language cabs being sent with update cabs.
Sent from my PI39100 using XDA Windows Phone 7 App
I'm just throwing this out there...but it seems that ATT Titans seem to be getting half brick issues more compared to unbranded devices.
Did you guys stay at stock SPL 1.10 (never upgraded the bootloader from the HTC website) when you tried installing the HSPL through goldcard?
OR
Did you upgrade the bootloader (off the HTC website) to upgrade the SPL to 2.6 before trying the goldcard?
I have not tried anything yet with my phone, but I was curious because half of the Titans have SPL 2.6 already from HTC while all/most ATT users are stuck at 1.10. -Would this have anything to do with the problems we are having?
Tachi91 said:
Now I'm stuck on 7720 .. CabSender Doesn't work (null Firmware)... Can't Flash Europe 2.05 rom using GoldCard... I'm stuck with 2.5(DFT) SPL even when i try flashing the SPL 2.6 from HTC or the HSPL from DFT.... Whatever SPL they made or got it from..... It won't upgrade/downgrade.
This is Nice...
Click to expand...
Click to collapse
Flashing the stock rom twice reverted the spl back to 1.10 for someone else earlier today. its worth a shot.
Sent from my PI39100 using XDA Windows Phone 7 App
xconomicron said:
I'm just throwing this out there...but it seems that ATT Titans seem to be getting half brick issues more compared to unbranded devices.
Did you guys stay at stock SPL 1.10 when you tried installing the HSPL through goldcard?
OR
Did you upgrade the bootloader off the HTC website to upgrade the SPL to 2.6 before trying the goldcard?
I have not tried anything yet with my phone, but I was curious because half of the Titans have SPL 2.6 already from HTC while all/most ATT users are stuck at 1.10. -Would this have anything to do with the problems we are having?
Click to expand...
Click to collapse
I had SPL 1.10 ... Then I made a GoldCard with the 2.05 SPL within the DFT folder and flashed... The Bootloader then read 2.5.XXXXX ... So I assumed all went well and ran the HSPL Install program.. It continued successfully and claimed HSPL was installed.. I restarted the phone and the bootloader still read 2.5.XXXX
GreenGrenadez said:
I believe it has something to do with language cabs being sent with update cabs.
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Even without the Language cab it fails... And the phone does not stay in the Zune Update Screen for long... If I restart the phone and manually enter the Zune Screen (Vol-) it restarts after 2~ seconds.
----
I tried flashing the Cingular 1.10 rom twice via GoldCard and RUU both flashed successively but kept the SPL at 2.5
habnzrot .. From what i assume did not attempt HSPL, merely updated to HTC 2.6 SPL then unbranded the titan by flashing Europe ... essentially going from 2.6 > 2.05 > 1.10
Whatever is going DFT SPL2.05 is preventing it from being rewritten up or down
Back on 8107 ... Run the Cabsender and while the phone is restarting for the first time.. Pull the Battery and then Power on the phone while holding (vol-)
The downgrade happened when I was on stock Cingular rom with spl 2.6 (upgraded through HTC recent bootloader update) as I said previously it was a pure coincidence whille I was trying to get my internet sharing to work. When I unbranded my titan though goldcard, I first upgraded it using the HTC update so I was back to spl 2.6 ATM I have not tried to flash the HSPL.
This is very interesting...on the DFT thread on the Windows forum, it seems very few people with ATT Titans have the HSPL and actually flashed a custom rom.
So Tachi, just for confirmation your phone actually had "HSPL" 2.5.xxxx after goldcard? or just SPL 2.5.xxxx??? I think the OP had just "SPL" 2.5.xxxx after trying to goldcard with HSPL.
It would be very interesting if this has to do with the original SPL number on the phone. When you upgrade to SPL 2.05 (which is basically the same/modified HTC's 2.5 SPL?) it's possible that it doesn't "successfully" upgrade when we have SPL 1.10 even if it does say "successful."
Now going back to your problem...and once again I am throwing this out there...
Have you tried reflashing the stock OS with with Advanced RUU?
http://forum.xda-developers.com/showthread.php?t=1637294
I am not entirely sure if what this does as it may be just another way to flash through RUU, but I remember Task 29 on WinMobile where it practically wiped the phone before you could install the a new/stock OS/SPL.
xconomicron said:
This is very interesting...on the DFT thread on the Windows forum, it seems very few people with ATT Titans have the HSPL and actually flashed a custom rom.
So Tachi, just for confirmation your phone actually had "HSPL" 2.5.xxxx after goldcard? or just SPL 2.5.xxxx??? I think the OP had just "SPL" 2.5.xxxx after trying to goldcard with HSPL.
It would be very interesting if this has to do with the original SPL number on the phone. When you upgrade to SPL 2.05 (which is basically the same/but modified HTC's 2.5 SPL) it's possible that it doesn't "successfully" upgrade when we have SPL 1.10 even if it does say "successful."
Now going back to your problem...and once again I am throwing this out there...
Have you tried reflashing the stock OS with with Advanced RUU?
http://forum.xda-developers.com/showthread.php?t=1637294
I am not entirely sure if what this does, but I remember Task 29 on WinMobile where it practically wiped the phone before you could install the a new/stock OS/SPL.
Click to expand...
Click to collapse
I had 1.10 then I used the GoldCard to flash DFT 2.05 SPL ... Thats when It showed 2.5 ... I attempted afterwards to flash HSPL but the SPL remained at 2.5 ..
I tried using the Advanced RUU but its the same.
task28 stops task29 which formats the Partition where the UserData is stored... It leaves the radio/SPL untouched. Now task00 stops task28 from taking place keeping UserData, but it fails when i try doing a task00/28 with the 2.05 SPL DFT provided.
Tachi91 said:
I had 1.10 then I used the GoldCard to flash DFT 2.05 SPL ... Thats when It showed 2.5 ... I attempted afterwards to flash HSPL but the SPL remained at 2.5 ..
I tried using the Advanced RUU but its the same.
task28 stops task29 which formats the Partition where the UserData is stored... It leaves the radio/SPL untouched. Now task00 stops task28 from taking place keeping UserData, but it fails when i try doing a task00/28 with the 2.05 SPL DFT provided.
Click to expand...
Click to collapse
That is BALLS!!! yea, thanks for the info on "Task" - I totally did not know that. Well I will continue to look into this issue. I might even try it myself once I get my Y cable here in the next few days. But anyway, hopefully more folks will chime in to help you over on the DFT thread.
Does anyone know if we can overwrite the spl via cabs?
Sent from my PI39100 using XDA Windows Phone 7 App
IronMan1289 said:
Does anyone know if we can overwrite the spl via cabs?
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
No.. cabs work only on things that deal with the OS. Bootloader, Radio, SPL are too low level actions.
Have anybody fixed this cabsender error: "system.exception: firmware device is null"? I still can't upload language pack. What I'm doing wrong?
I've just unlock my Titan as described ht tp://ww w.youtube.com/watch?v=drTVTuj71TY