Qwest Mogul: How to restore original ROM? - Mogul, XV6800 ROM Development

Hey guys,
I'm getting my Mogul replaced under warranty from Qwest and I need to know how to restore the original Qwest ROM before shipping it back to them.
TIA,
-mak

Anyone help?
-mak

.mak said:
Anyone help?
-mak
Click to expand...
Click to collapse
I didn't verify this... but check this wiki out... Return to Stock Wiki

nitro66215 said:
I didn't verify this... but check this wiki out... Return to Stock Wiki
Click to expand...
Click to collapse
Thank you, but there's no stock Qwest ROM listed
-mak

I just found this on the HTC website;
Code:
Why update the ROM on your device?
The software upgrade posted below provides several key enhancements for your Mogul:
1. Adds EV-DO Rev.A functionality for faster download and upload speeds when transmitting data.
2. Adds GPS functionality
3. Adds a Task Manager to the Today screen for easier access and management of running programs.
4. Improves Bluetooth performance including usage with wireless stereo headsets.
5. Corrects an issue where MSN Messenger content may be erased when the device power cycles.
Download HTC 6800 Mogul Update - Version 3.35.656.2
Can I use this to re-install the STOCK firmware on my Mogul?
-mak
EDIT: The Qwest ROM listed above has been linked in the 'Return to Stock' wiki article now.

Bump!
I just need verification that I can use the above stock Qwest ROM and the 'Return To Stock' wiki article to get my old Mogul back to stock.
-mak

.mak said:
Bump!
I just need verification that I can use the above stock Qwest ROM and the 'Return To Stock' wiki article to get my old Mogul back to stock.
-mak
Click to expand...
Click to collapse
I wish I could answer that. I don't have a quest phone to test this out on. I would give it a try though, personally.

What do you mean there is no stock rom??? At the bottom of the Rom's it list Qwest 3.35. That is the stock GPS Rom Mogul on the HTC Site.
Not to mention did you go here?
http://www.htc.com/us/SupportDownloadList.aspx?p_id=73&cat=all
HTC 6800 Mogul Update - Version 3.35.656.2
The HTC has the newest rom that is posted in the Wiki section.
Follow the Wiki to return to stock.

Big Dawg 23 said:
What do you mean there is no stock rom??? At the bottom of the Rom's it list Qwest 3.35. That is the stock GPS Rom Mogul on the HTC Site.
Not to mention did you go here?
http://www.htc.com/us/SupportDownloadList.aspx?p_id=73&cat=all
HTC 6800 Mogul Update - Version 3.35.656.2
The HTC has the newest rom that is posted in the Wiki section.
Follow the Wiki to return to stock.
Click to expand...
Click to collapse
I'm the one who put the Qwest ROM in there.. it wasn't there before I put it there - which was after I posted that comment and found the ROM on HTC's website
Please pay attention next time.
I still need an answer guys.
-mak

yes yes yes u can use it and u will be fine / just relock it if u have unlocked your phone before loading stock rom (i believe thats how it works)

hi guys do you have a rom 2.xx
radio ver 1.xx set up or back up?

Related

Telstra AU - UTMS - Radio Version

Hey All,
First of all this is a great site. Just got my Jas Jas a week ago and im in love with this place.
Any way enuf ego inflating.
--------
I thought that i would upgrade the radio version because there were reports that this would improve my UMTS / HSDPA reception.
It didn't here are my results.
1.34.00.10 Download (1st try)
Tried this one first as i thought the latest might have been buggy. Flashed nicly but the reception defaulted to GSM. Only worked on UMTS when i changed the band to 2100 rather than 850. And then the reception was 2 bars compared to the 100% i usually get.
1.27.00.00 Download (2nd try)
Tried this one next as its the reccomneded "stable" version.
Still go the same results.
1.20.31.10 (Orignal Shipped rom)'
Ended up returning to this rom to get functionality and worked no issues.
Was just wondering if any other AU ppl had these issues ?
And what is the chosen ROM of choice in AU.
I am still plucking up the courage to flash to XDA-Live but if i do my radio should not change because the install does not include a radio, correct.
And one last ? if i o upload to XDA-L does the extrom stay the same and will my unit grab all the op settings that are in the EXT Rom or do i have to load then with a cab that i can grab out of the ship rom?
Hope the post wasn't to long,
Thanks
Hi Shaun,
I suggest you have a read through the threads and the Wiki, you'll find most of your answers are in there. XDA Live does not contain a Radio ROM so will not affect that side of things. Personally I recommend putting in your provider settings manually, as that way you know nothing will stuff up due to any funny files in the CAB!
I suggest you try the new radio ROMs again when you're running WM6, perhaps you've got issues with the icons displaying incorrectly depending on your radio version. Personally I'm using 1.35 without issue, and its been better than anything else, but then again I'm not with a provider who prides itself on making its own stupid frequency decisions just to be awkward
Cheers
Kevin
Shaun33 said:
Hey All,
First of all this is a great site. Just got my Jas Jas a week ago and im in love with this place.
Any way enuf ego inflating.
--------
I thought that i would upgrade the radio version because there were reports that this would improve my UMTS / HSDPA reception.
It didn't here are my results.
1.34.00.10 Download (1st try)
Tried this one first as i thought the latest might have been buggy. Flashed nicly but the reception defaulted to GSM. Only worked on UMTS when i changed the band to 2100 rather than 850. And then the reception was 2 bars compared to the 100% i usually get.
1.27.00.00 Download (2nd try)
Tried this one next as its the reccomneded "stable" version.
Still go the same results.
1.20.31.10 (Orignal Shipped rom)'
Ended up returning to this rom to get functionality and worked no issues.
Was just wondering if any other AU ppl had these issues ?
And what is the chosen ROM of choice in AU.
I am still plucking up the courage to flash to XDA-Live but if i do my radio should not change because the install does not include a radio, correct.
And one last ? if i o upload to XDA-L does the extrom stay the same and will my unit grab all the op settings that are in the EXT Rom or do i have to load then with a cab that i can grab out of the ship rom?
Hope the post wasn't to long,
Thanks
Click to expand...
Click to collapse
im using the trinity radio 1.35.00.11 with NextG and also Vodafone and the HSDPA reception is awesome...
what ROM version are you using now??
xda-live does not flash the extended ROM... so you can use HTweakC to unlock it and use the cabs.....
I use Blackberry so my device is connected via UMTS on Telstra all the time. I had upgraded to 1.35 radio because of the reports of it's increased reception.
Well the battery drained in about 5 hours so I am reverting back to the original rom which gave me 24-36 hours battery life with UMTS active.
walshieau said:
im using the trinity radio 1.35.00.11 with NextG and also Vodafone and the HSDPA reception is awesome...
what ROM version are you using now??
Click to expand...
Click to collapse
Thanks for the response guys. Ive read the wiki and have taken it in, just wanted to check.
I have now reverted back to the orignal radio rom that was shipped with the unit which is 1.20.31.10. Its a pain i am with telstra but there is nothing you can do when the company has 30od services with them.
Was going to load the trinity mod but does this mean that i need to super CID the device. As i got a country ID. This means i will void the warrenty. Is there a way that i can do it without the super CID.
Err... the Trinity radio version in the Wiki (which I hope you're getting from the Hermes Radio Rom wiki page and not the Trinity page!) is bundled with SSPL which means you don't have to worry about CID.
Shaun33 said:
Was going to load the trinity mod but does this mean that i need to super CID the device. As i got a country ID. This means i will void the warrenty. Is there a way that i can do it without the super CID.
Click to expand...
Click to collapse
yes you need to run SSPL on your device before you run the update....
edit... and no you dont need SuperCID to flash this radio...
walshieau said:
yes you need to run SSPL on your device before you run the update....
edit... and no you dont need SuperCID to flash this radio...
Click to expand...
Click to collapse
.. but because the 1.35.00.11 radio only package from the Wiki is already bundled with the modified RUU updater which pushes SSPL to the device automatically, he'll only need to run the ROMUpgradeUt.exe
Edit: Actually with the 1.35.00.11 package, you don't even need to do that - just run the .exe you download from the Wiki and follow the prompts! What could be easier!
KevinBaker said:
.. but because the 1.35.00.11 radio only package from the Wiki is already bundled with the modified RUU updater which pushes SSPL to the device automatically, he'll only need to run the ROMUpgradeUt.exe
Edit: Actually with the 1.35.00.11 package, you don't even need to do that - just run the .exe you download from the Wiki and follow the prompts! What could be easier!
Click to expand...
Click to collapse
i sent him the update... and i forgot the sspl-herm.exe file....
walshieau said:
i sent him the update... and i forgot the sspl-herm.exe file....
Click to expand...
Click to collapse
Ah, makes sense then .
Shaun, you can either download the modified RUU Updater, or just download the 1.35.00.11 Radio ROM with RUU/SSPL updater integrated.
Thanks guys i thought that that rom was not the trinity one. Then one that i got was from the ftp .
Now i got that one which does have the RUU/SSPL updater integrated.
Thanks guys.
Just flasshed with the 1.35 Rom and it seams that its got Less reception than before. Onlyt by a bar and this in my current location. I have set the abnd to auto and will see how it goes will update ina day or 2.

New radio ROM 1.38.00.11 (from trinity)

I've extracted the radio ROM from latest Trinity ROM and packaged here as a standalone NBH radio upgrade:
HERM_RADIO_1.38.00.11_Only_SSPL.rar​This radio has HTC_BOOT 0108 and GPS enabled.
Keep in mind that the safest procedure to upgrade your radio right now is:
Flash Hard-SPL v1.10.Oli on your phone
Flash the desired radio upgrade using the RUU package
Both steps have to be done with phone connected to computer through USB cable and activesync enabled, Des SSPL will be pushed into your phone when the RUU starts.
Remember that when flashing a radio only you don't need to hard-reset your phone, so no data will be lost.
Enjoy!
Excellent! Have you given this radio a work-out yet??
still flashing 92%
Edit: Flashed and working fine (see attached image), but still haven't seen any noticeable difference
What news with this radio ? most stable, battery ingrasse ?
pof said:
Keep in mind that the safest procedure to upgrade your radio right now is:
Flash Hard-SPL v1.10.Oli on your phone
Flash the desired radio upgrade using the RUU package
Enjoy!
Click to expand...
Click to collapse
Pof ,I understand 1.10.Oli will somehow protect us from bricking device by flashing a wrong radio.But since it is base on 1.04 ,so it will not support Radio BL 0108,so if I am now having 0108 here,and I flash this rodio 1.38,and I got a bad flash,I still can not repair my device.Is that right?
Radio-BL 0108 or something newer?
Hope the battery-duration will be better than in 1.35 Radio
@qvik123: If that happens you have two options to unbrick your device:
1) wait for a hard SPL based on 1.09 (which AFAIK Des will release soon), once you have it reflash the radio again.
2) You will still be able to flash an OS only because hardSPL will still keep the "fake" SuperCID on your device, so flash a OS image with KITL enabled and then use the KITL mehtod to unbrick your device with Platform Builder.
By any means, if **** happens do not overwrite 1.10.Oli with other bootloader.
Thanks Pof,you just answered the question which kept me thinking since Hard SPL released.Flashing this one,now by 30%.
flashed 1.01 oli, flashed 1.38.00.11 - no problem, BUT when I flashing/updating (or possibly bricking ) device, I like to know what exactly is a differences between versions, only one think I know about 1.38.00.11 is, that this version have GPS enabled. Thats all. Is any changelog, or list of changed/updated/improved features inside of roms? I know, that you just dump this rom from device, but it is really nice to know, if it is necessary. perhaps we should created one special thread with differences between versions, to better orientation (sorry if I miss this one, but I think at this time doesnt exist)... guys - thx for your work anyway
Thanks Pof I am going to upgrade.
ok a little lost on the process can I just download the 1.38 file and that will upgrade it or do i have to do something to the boot loader first? Sorry for the simple question.
yes, the question is really simple. but there is one more think you can do... read all this thread, and also this one. all necessary information is in there. and if you dont want to have 700$ paperweight, I really recommend to read all information about flashing procedures in wiki - here before you start. in any case of question or problem, do not hesitate to write some posts, but if anybody ask similar question like you, without some reading, which, yes, need a some time, then If somebody want to find any relevant and usefull information, must read about 60 % pointless posts... it is nothing personal, just for your info. forums is about people, and people keep forums alive.
you did not provide us any information about you current version of OS/ROM, BL version, for me it was easy, just extracted Hard-SPL.zip, runned ROMUpgradeUt.exe - after reset I have oli BL, then you can run HERM_RADIO_1.38.00.11_Only_SSPL.rar.... there is much much more knowledge about that, so try wiki first, it is only for you own good.
jasonmoe said:
ok a little lost on the process can I just download the 1.38 file and that will upgrade it or do i have to do something to the boot loader first? Sorry for the simple question.
Click to expand...
Click to collapse
sinmae said:
....just extracted Hard-SPL.zip, runned ROMUpgradeUt.exe - after reset I have oli BL, then you can run HERM_RADIO_1.38.00.11_Only_SSPL.rar.... there is much much more knowledge about that, so try wiki first, it is only for you own good.
Click to expand...
Click to collapse
Yes definatly read the wiki etc... but also do as sinmae has done and load a HardSPL first, this is especially relevant when flashing radios.
@pof are you also running a HardSPL based bootloader??
...can somene put this ROM on Rapidshare or somewhere else, cause XDA FTP is not working
Regards,
Primoz
any feedbaack with wm6 roms
has anyone tried this radio with wm6 and whats the advantage over radio 1.35. i have got wm6 running with radio 1.35 running very good with no issues and lock ups.
sinmae said:
Is any changelog, or list of changed/updated/improved features inside of roms? I know, that you just dump this rom from device, but it is really nice to know, if it is necessary.
Click to expand...
Click to collapse
Unfortunately HTC keeps this information private, so there's no ChangeLog.
The radio was not dumped from a device, but extracted from 1.23.408.1 Italian Trinity ROM.
mrvanx said:
@pof are you also running a HardSPL based bootloader??
Click to expand...
Click to collapse
Yes, I'm running 1.10.Oli right now.
Pc78 said:
XDA FTP is not working
Click to expand...
Click to collapse
It's fixed now, try to download again. The server has been down during last hours, but it should be all fixed now.
duttythroy said:
has anyone tried this radio with wm6 and whats the advantage over radio 1.35.
Click to expand...
Click to collapse
Yes, I tried only with WM6. We don't know the difference / advantage, just that it's a newer (higher) radio version.
duttythroy said:
has anyone tried this radio with wm6 and whats the advantage over radio 1.35. i have got wm6 running with radio 1.35 running very good with no issues and lock ups.
Click to expand...
Click to collapse
The download server was down now running!!!!!
Just upgraded to radio 1.38 from 1.35 and I am running xdalive first release WM6 on O2 3g. Since the upgrade I am pretty sure the phone signal is now stronger as I have tested it in areas around my home and outside that got no signal, especially near my pc. I can now make a call next to my pc with 3 bars on the signal meter! The signal does not drop so much, I will test further and report back any problems, but so far so good.
Please let me know how you get on.
Can somebody compare the battery duration between this Radio and 1.34?
PAPPL said:
Can somebody compare the battery duration between this Radio and 1.34?
Click to expand...
Click to collapse
I will let you know on that one as I had it fully charged for the radio upgrade. I will keep an eye on it and report back.
I was about to down grade my radio back to .1.27 or earlier beacause of my UTMS reception in Brisbane (AU) and also the battery life. So i will also let you all know how this goes.

T-Mobile ROMs - Available links here!

OMG!!! T-Mobile have released Official WM6 ROMS UK NE DE AT!!!
Thread
There are a lot of people who keep asking for T-Mobile ROMs I was one of them. So this morning after someone else asking I have decided to post this in the hope it can be referred to!
CURRENTLY AVAILABLE DUMPED T-Mobile ROMs
UK ROM
UK ROM - With CustomRUU v4.3 felt kind so updated it for you all!
UK ROM - Windows Mobile 6 Test 3.60 - Radio 1.50
DUTCH ROM
CROATIAN ROM
GERMAN ROM
Edit from Sleuth255: We are not allowed to host ROMs here. Please post to rapidshare or some other site then link. I must remove these ROMs from our FTP due to an edict from m$ legal. Sorry
The UK one appears to have been built however I have not tested it, if someone has used it in the past please let me know.
I have not checked any of the others, if people have used them and they are built please contact me and I shall update this accordingly.
Please can someone update the Wiki for the UK ROM, thanks.
CURRENTLY AVAILABLE SHIPPED T-Mobile ROMs
HUNGARIAN
GERMAN
SHIPPED ROMS HERE
If there are anymore T-Mobile Shipped ROMS I have not mentioned please msg me and I will update accordingly.
Any chance of this thread being sticked?
Thanks, I think this is very helpfull.
Great! Always usefull when you need to restore your device
Has anyone tested if any of these ROMs flash properly.. for me it would be the Dutchversion then... But I can not test right now can not have my phone broken down. Once Kaizer is out I am going to buy that one and then I could test, but would be nice to know if these dumped ROMs work
Unfortunately I do not know, I haven't even tested the UK version as I am not sure if it will work, however I did update the RUU.
Shame we cannot emulate the firmware install!
The T-Mob UK dumped ROM isn't quite right - the w'n'w home page doesn't work properly.
Minor thing but, one of the first things I tested
I dumped my friends ROM the other day. I'm currently working on building it and testing it - will let you know when it's done
Cheers,
Smiffy.
Hmmm...humble pie - lovely
Well, after flashing the ROM i dumped the other day, I had exactly the same thing with IE.
It took me about 3 seconds to realise it must be because the extROM had been flashed by one of the WM6 ROMs I had been using in the past.
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Smiffy.
Lordsmiff said:
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Click to expand...
Click to collapse
How can I do that?
trapper said:
How can I do that?
Click to expand...
Click to collapse
Trapper,
I assume you mean how can you put the correct Extended ROM onto your device? If I understand this correctly, the ROMs mentioned in Jygar's first post are the original main ROM but the Extended ROM is in fact from a Windows Mobile 6 ROM (I do not believe that flashing a ROM will affect the Extended ROM - the problem is that the re-flashed (downgraded) WM5 ROM is starting the Extended ROM installation after the basic OS install (as normal) but that Extended ROM is still a WM6 one.
The page that is linked to includes many Extended ROMs from many countries and devices - one of them an original T-Mobile ROM (here) and if you were to unlock/unhide and mount your Extended ROM you would be able to delete the incorrect (WM6) ones and then paste in these original Extended ROM files.
The Extended ROM files are executed during a hard reset after the OS has been installed - details of how this works are within this forum. I am not sure that you need to do a hard reset but it all depends on whether you stopped the device completing a normal (complete) install. After a hard reset the device will start to execute the Extended ROM files/.cabs and if you stop that with a soft reset as soon as it starts then the device will re-boot with a basic WM build (with no service provider fixes/updates/customisations/settings)
If this is all explaining what you already know then sorry but your question posted is rather open... Hope this helps
ExtROM.nb attached Just put it into an NBH and flash
@tony.wheeler - What was the original radio version of your Vario II? I'm in the process of creating a complete upgrade to restore UK MDA Vario II's to their 'out of the box' state with the original ROMs (IPL, SPL, MainSplash, SubSplash, OS, Radio ExtROM)
Phil
eek, think it was 1.03?
[edit]Have done a search it appears it is 1.05!
only problem is this is HTC_BOOT 0106 and most ppl are now patched to 0108 so I would have thought we cannot downgrade our radio rom.
TBH 1.43 is the best radio rom out and i cannot say a bad word against it. I have only eva updated my radio rom and since the radio update have not had a problem with the origional t-mob os.
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
The dutch rom seems to be in *.raw files. How can i open of re compile it?
jm012a9749 can you upload it?
RaDeNRFX said:
The dutch rom seems to be in *.raw files. How can i open of re compile it?
Click to expand...
Click to collapse
Same question here.
Does anyone know how to use the .raw files...?
as its all t-mobile users on this thread, what radios are people finding the best? UK
Read, read, read...
wensing said:
Same question here.
Does anyone know how to use the .raw files...?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoReconstruct
fil said:
as its all t-mobile users on this thread, what radios are people finding the best? UK
Click to expand...
Click to collapse
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
jm012a9749 said:
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
Click to expand...
Click to collapse
Any chance of you posting this backup ROM? There are many of us who would be very keen to have this as a safety net for when we have to return our Vario 2s under warranty.
twelve47 said:
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
Click to expand...
Click to collapse
I too am running with Radio 1.50, after a short-lived update to WM6. I have had no problems at all with 2g or 3g, steady as a rock.

Cingular 8525 Downgrade

how would i go about downgrading back to the origional cingular 8525 rom? i have upgraded to the wm6 black edition and the keyboard is messed up. is it at all possible to downgrade back to wm5 for the att or cingular 8525?
Jc61990 said:
how would i go about downgrading back to the origional cingular 8525 rom? i have upgraded to the wm6 black edition and the keyboard is messed up. is it at all possible to downgrade back to wm5 for the att or cingular 8525?
Click to expand...
Click to collapse
No need to just search for Advancedconfig install to your phone and go to the Misc. tab then change your keyboard to Cingular. Or else search the WIKI and see how to do it using the registry
oh also, when i upgraded, it says i dont have a data plan, so how would i add the data number and info to my phone so i can go on the internet again
but still if i wanted to downgrade back to the original os how would i?
To go back to the original you would probably need the original flash from ATT/Cingular. I believe you can get it from their support web site.
The problems you have are fixable though. You need to edit your registry for the qwerty keyboard and install the "cingular.cab" on your phone to get your data connection back (or manually set up the connection).
Jc61990 said:
but still if i wanted to downgrade back to the original os how would i?
Click to expand...
Click to collapse
Check this link for downgrade help.
Cingular ROMs (which can be un-rar'd and then extracted with dutty's good nbh tool to get the pieces of the ROM if you only want pieces) can be downloaded from the wiki here.
Jc61990
HERE'S a link to a page a created for less experienced users with links to many reference sites.
If you go to Hermes Cab Respository link and scroll down to DeStefano's Cab Collection I believe you'll find a Cingular Keyboard Fix which may also help.
As well, my page hopefully has many other threads and resources that may be helpful.
Best wishes,
thanks a lot.... im back on WM5
upgrade to mobile 6
http://forum.xda-developers.com/showthread.php?t=334771
advancedconfig install?
ruff_ryder_v12 said:
No need to just search for Advancedconfig install to your phone and go to the Misc. tab then change your keyboard to Cingular. Or else search the WIKI and see how to do it using the registry
Click to expand...
Click to collapse
Ho do you do the advancedconfig install? I searched the forums with no result.

Do I have a new VZW STOCK radio and rom?

I just received a replacement phone from VZW and it appears to have a stock radio/rom that I cannot find the in the community.
From the right side of the boot screen:
P DCBBPZM-615010
R 1.03.09V
D 1.08
From the bootloader (tri-color) screen:
SPL-0.40.0000
From the About screen in Settings:
Windows Mobile 6.1 Professional
CE OS 5.2.20769 (Build 20679.1.4.5)
I was able to rip the flash memory from a tutorial on this site (link) but I have still yet to find a tutorial about dumping the radio. I have been doing searches on here and on PPCGeeks, but I have not found what I'm looking for. Does anyone have any help they can give?
Thanks to Mattheyu and CheezWiz on PPCGeeks for the help so far.
Link to the thread relating to this on PPCGeeks: link
would love to try a new tp radio
You can't extract a radio from a dumped ROM.... All radios are extracted from Shipped ROMS.
metalmayhem said:
You can't extract a radio from a dumped ROM.... All radios are extracted from Shipped ROMS.
Click to expand...
Click to collapse
I know for a fact that all of them aren't extracted from shipped ROMS. I know that they include them, but if you look at my first post I have the raw files dumped from my phone's memory, not just the ROM. If these raw files do not include the radio, then I would be happy to learn how to dump the radio as well. I know it can be done, I just don't have the means to do it.
just to let you know this radio is already dumped and you can use it on the tp for cdma. not sure about gsm though. i really really want a dumped shipped rom of alltel or just even the stock radio would be fine.
psycho_maniac said:
just to let you know this radio is already dumped and you can use it on the tp for cdma. not sure about gsm though. i really really want a dumped shipped rom of alltel or just even the stock radio would be fine.
Click to expand...
Click to collapse
You and me both brotha, I have a feeling now that the merger is in full swing, us Alltel peeps wont be seeing any new ROM updates or new devices. I really hope I'm wrong though.
As you mentioned psycho_maniac, VZW has released an update that was leaked to the community. I'm not giving up my pursuit, but now it has turned from me wanting to give a new radio to the community, to how much I can learn about this stuff. If anyone has any adivce on the use of QMAT, please feel free to give it.
I wish you two, and all other alltel customers luck on getting an alltel update.

Categories

Resources