Hey guys been searching the forums alot and can't seem to find a solution to this issue apart from people saying its in the registry, but i can't find hte setting if its in there
My phone is the Neon200 which should have UMTS 850/2100
However the ROM i have used (Seth2006's Diamond V2) makes my phone think its UMTS 800/1900 setting the phone to auto fixes my issues except the phone likes to use the 850Mhz over the 2100Mhz thus i Roam to Telstra's network and nto Three's
Any idea's how to fix this?
I have tried installing different radios and running some CAB's i found on the forum to no avail
No idea's or solutions at all?
Ahaha please guys really i've trolled the forums and google nothign at all
Did you try ask Seth2006 about it?
Yes unfortuntely i've had no reply
Can anyone help me with this? Point me to a registry setting or somethign atleast where these settings would be kept
Im close to solving this and will post it up
http://forum.xda-developers.com/showthread.php?t=386661
Is my reference its the wrong model just reloading a stock Telstra ROM then exporting the registry keys
Ok i solved this issue
I hav atatched in this thread 2 .reg files that make the appriate changes
http://forum.xda-developers.com/showthread.php?p=2580215&posted=1#post2580215
Related
Hi,
Apologies for this question, but i cant get 3G sign in my mobile, while other Nokia n73 can get it. I updated my radio to v1.43, and still no [3G] sign...
In some areas i get [G] which means GPRS signal, and in other areas i got [E] which i don't know what does it mean... Any ideas??
Thx in advance
E = Edge...
Thanks Madcap... But as far as i know that Edge (EGPRS) is an extended version of GPRS whilst 3G is based on WCDMA.
My question now is why my Nokia n73 Reading always 3G, and my HTC is not reading it??? Is there is something wrong in HTC? or i must do some settings for that one?
Thx
pop20032004 said:
Thanks Madcap... But as far as i know that Edge (EGPRS) is an extended version of GPRS whilst 3G is based on WCDMA.
My question now is why my Nokia n73 Reading always 3G, and my HTC is not reading it??? Is there is something wrong in HTC? or i must do some settings for that one?
Thx
Click to expand...
Click to collapse
Hello,
You say that your Nokia can receive a 3G signal and the Hermes cannot - are they both using SIM cards from the same provider and if not then do both providers supply a 3G signal where you are trying to use the Hermes?
If you should be able to receive a 3G signal on your current provider then I'd suggest you try the following:
1. Check the settings of the Hermes Phone. Try looking at the band selection setings by going to Settings - [Personal] Phone - Band Tab then checking that the Network type is set to Auto. The screenshot below shows the screen that I mean. If this is set to GSM then change it to Auto and see if that fixes the problem. If not then try...
2. Force use of 3G. Even with Auto selected your Hermes handset may be using 2G because that signal is much stronger than the 3G signal. You can force the handset to try 3G only by using a 3rd party application such as Bandswitch (an excellent product by Daniel Herrero - see his posts here: http://forum.xda-developers.com/showthread.php?t=286844&highlight=bandswitch). You can download Bandswitch here: http://commmgrpro.com/_wsn/page2.html. Try using this application to set the handset to 3G and see if that works.
If you should have a 3G signal but none of this helps then it seems you have a problem that may need warranty attention. Is the handset new?
Hope this helps
Hello Tony,
Thank you for your reply. I tried what you advised. Still Cant Capture the 3G signal...
Also, i tried an application called "fieldtest_157.exe". It is described somewhere in this group. I can't find any signal (zero values) for anything related to WCDMA, UMTS, and 3G
This is weird.. I just went into settings>phone .. and there is no BAND tab.. wtf?
Madcap180 said:
This is weird.. I just went into settings>phone .. and there is no BAND tab.. wtf?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=283797http://forum.xda-developers.com/showthread.php?t=284201
Mike
Hi Mike,
Have added this reg tweak. It added WCDMA & a couple of protocols in the band section of phone settings. Non of them is working... Is it possible that my radio has a problem? I'm using GPRS very well, and i have excellent GSM connections... What could be the problem?
Hi everybody,
I'm trying to solve an issue regarding to the network selection with my old prophet.
I'm actually in Switzerland, just a few miles from the french border and as french internet mobile are way better than swiss one, I keep on using my french mobile.
I set my network selection to manual but as soon as I loose the french network, it switch to a swiss one as if network manual selection was not enable.
I know it doesn't come from the sim as it has the right behaviour on my HTC Diamond (unfortunately Diamond reception is far from the Prophet one)
I tried to update the Radio without success and I also tried every possible rom.
If somebody could help me trying to understant where it comes from.
118 view and not a single answer... Come on guys, I know we are not a lot of Propher users remaining but somebody necessarily noticed this issue ?
tonio94 said:
118 view and not a single answer... Come on guys, I know we are not a lot of Propher users remaining but somebody necessarily noticed this issue ?
Click to expand...
Click to collapse
you may try THIS SECTION
Hello,
I am new to posting here, however I have been reading throughout the forums since I got my HTC PPC6800 in September through US Cellular. I have been through a few different custom roms and have never had any trouble. Then, yesterday after flashing to a winmo 6.5 rom, I lost the ability to connect to EVDO and I am stuck on 1x all the time. I switched back to Titan Reloaded v1.3.4 and still have the same issues. I also had changed my banner yesterday from CellSouth to US Cellular through QPST and I have since reloaded the file from when I read it with QPST before making changes.
Does anyone know of any issues that could cause this?
Thanks
Dave
Hey this might get you on the right track.
Did you use Debug(fieldtrial) (dialer code ##33284 call button) mode and look in the HDR tab and make sure it says you are authenticated? If not then you have to Re-Authenticate. That is done is PST (##778 call button). Follow my Cricket PST settings thread, (only the Part about re-authenticating) and use your US cellular values. Let me know if I have helped.
Just whatever you do, do not Use CRICKET settings for the Carrier you are using which is US CELLULAR
Have you checked your EPST settings to make sure they are correct? You might try running the uscc carrier cab. EVDO will not connect unless the EPST Security/MIP Profile settings are correct.
These were the settings I had to change for my phone to connect to EVDO: http://sites.google.com/site/victorbush/htc-6800-1/epst-data-settings
Its under EPST, goto Security, under HDR Username and password it needs to be as follow.
Find your ESN (In hex first)
HDR Username should be ESN(IN HEX)@uscc.net
HDR Password should be your ESN(IN HEX)
i.e.
ESN = 3C123456
HDR Username [email protected]
HDR Password 3C123456
(The ESN must be in CAPS)
PPP Username and password are based on phone #
i.e.
phone# = 1234567890
PPP Username = [email protected]
PPP Password = 1234567890
This bit me and several other people when USCC first launched EVDO
Also, mine has been changed from just flashing the rom, so you may need to fix this more than once.
Just an FYI.
BTC
THANKS
This method worked great (changing settings in EPST.) I thank you all for all the help!!!!
Thanks SOOOOOO MUCH!!! Without EVDO my phone is useless!\
Dave
wow thanks for all the responses. in actually using your rom ryan. i love it but i often wondered what that debug program was for....lol im gonna try that asap. i thought just flashing it with your rom would "magically" work. everything else has. what is the us cellular stuff ur talkinh about? do the rest of those comments that all the other great people who responded carry any weight with ur rom? is it even a rom specific issue? my phone does recognize the evdo signal but will not function untill it drops back to 1x just to clarify my issue. sorry it took so long to respond. i have been attempting to cook my own rom and im working on a 2d fix that is not a plugin. thanks everyone for the response. i appreciate all the help!
abadasstanker69 said:
wow thanks for all the responses. in actually using your rom ryan. i love it but i often wondered what that debug program was for....lol im gonna try that asap. i thought just flashing it with your rom would "magically" work. everything else has. what is the us cellular stuff ur talkinh about? do the rest of those comments that all the other great people who responded carry any weight with ur rom? is it even a rom specific issue? my phone does recognize the evdo signal but will not function untill it drops back to 1x just to clarify my issue. sorry it took so long to respond. i have been attempting to cook my own rom and im working on a 2d fix that is not a plugin. thanks everyone for the response. i appreciate all the help!
Click to expand...
Click to collapse
I am only responding to what is in BOLD above. That issue sounds like you need to Un-Authenticate and Re-Authenticate. If you are using Cricket it explains how to do that in my Cricket PST settings thread.
I currently do not have a US cellular version of my ROM. This thread was created by the Member "kwineon" only to find out why his EVDO was not working on his ROM for US cellular. We helped him fix his problem and then you come along asking questions that do not even apply to MY ROMs OR This Thread (with the exception of your EVDO issue)
If you are going to experiment do it at your own risk... I have cooked 4 carrier specific rom's (Cricket, Sprint, Verizon, Metro PCS) thats it buddy..
I have an A&TT atrix , and i live in isral/
so, my problem i ithink is in my atrix, beacuse i tried everything and try in 1.57 and 1.83 the 3g cellular won't work.
ofcourse i write down the apn and nothing change.
I see the H sign up in the screen but no movement of the incoming an outgoing data and i was talking with my cellular company and the problem is in my cell.
what can i do? i want to break my phone
sorry about my english
Are you using Orange Celecom, or Pelephone?
cellcom why?
Did you make sure you have the right APN?
Menu>settings>wireless>mobile network>Apns>Menu>New APN
which you can either get from the many israeli blogs that have these settings or from cellcom
ofcource i tried and talked with my cellula company and i konw what to write in the apn setting . and that does't work at all.
i think i have a problem in my atrix..
I'm having exactly the same problem with my Atrix (brazilian version).
I guess is it something with Baseband version N_01.77.07P but im not sure.
does anyone know how to change the MMS Settings on the Lumia?
Factory reset seems to be a popular answer
but that doesn't fix anything
Yeah, you can't change it on WP. I would suggest Nokia's Network Setup, but it doesn't cover Giffgaff.
Change the MMS Settings
Hi,
Has anyone already succeeded in changing the MMS settings on the Nokia Lumia 800 ? I read a lot of workarounds, but nothing seems te help. The nokia Network Setup tool is even no longer available on the marketplace.
Anyone can help ?
Kind regards,
Bart
weemaba said:
Hi,
Has anyone already succeeded in changing the MMS settings on the Nokia Lumia 800 ? I read a lot of workarounds, but nothing seems te help. The nokia Network Setup tool is even no longer available on the marketplace.
Anyone can help ?
Kind regards,
Bart
Click to expand...
Click to collapse
Nokia Network Setup IS available on marketplace, if you open the link directly on the phone in the thread where it was posted.