Dcd Rom Problems - Mogul, XV6800 ROM Development

Could you help me out. I am trying to connect to a wifi network on the new DCD rom but from some reason its not showing the normal wifi connections page its showing the configure network adapters page. And im not sure if i am connected to wifi because there is no notification or signal icon at the top, but it is letting me access internet and saying that i have connection when im on the Wireless Lan page. But i want to beable to manage what connection im on and beable to tell if i am connected or not is this a normal problem?

The best idea is to post in that thread. You'll get more attention and less flaming

Related

wifi problems

my wifi was working fine with dcd 2.2.6, but since the upgrade to 2.3.x ive been having issues with it. it doesnt connect to my network, or search for networks like it should. sometimes it tries to connect and stays with the wifi icon on and arrows continuously going back and forth, but wheb i tap the icon, all it shows is the cellular data connection as active and no no wifi access point. in the wireless LAN settings it lists my networks as unavailable and wheb i click add new it wont search for ones that i know are around, it just asks me to put in the name of a new one. sometimes i dont even get the flashing arrows back and forth, but just get the antenna without a circle around it. any suggestions? either known problem related or just basic wifi fixes you can help me out with.
thanks
righ after posting i saw what i think is a similar problem in the thread right below me, so before someone calls me an idiot for not searching enough i wanna get that out there

[Q] WIFI network Connection unsuccesfull...I NEED HELP!!PLS....

hey everybody here...i have a big problem here....
i jz get my htc 7 mozart this few day...BUT i can't get connect my home wifi network.....
the phone keep showing " Connection Unsuccesfull, your phone couldn't reach the wifi netwok...." even i use the right password......T_T
HELP HELP HELP!!!!!
Well i suppose you can see the network you are connecting
If you can't connect, try to change some options on your router and then try again. Make sure the network is working fine first, like connect a wireless PC to the network and check its status.

WiFi Problem

Hey. My phone arrived today and so did the problems.
I have a wireless router(Asus W530G-V2). The internet runs great on my PC
Just before I went to school I could see my Wireless Network's name but I couldn't connect to it. It simply said Connecting... over and over again. The interned didn't work. Now I got home and and I can't even find the network. If I manually add it it's out of range.
Can someone help me?
Thanks.
edit: once in a while i get a weak connection (tp-link_b22866) that also doesn't work.
lol. check if ur asus router supports wireless internet. does it have an antenna or something?
Yes, it does. My sister used the wireless to use internet on her laptop.
It's possible that you could have entered the wrong password the first time, that would result in the connecting loop you mentioned, as for it not being visible I'm not sure why that would happen unless the SSID of the router is being masked, an idea might be to go to maccas and test your phone using the wifi there maybe? If nothing else connecting to another network would help us diagnose the problem.
I did a factory reset but still, the phone wouldn't see any network.
I'll try adding a wireless card to my PC and see if it receives any signal from the router.
If not, I gotta set up the router somehow.
Thanks.
check if ur router is compatible with the dd-wrt custom firmware. if its compatible flash it on ur router, it will solve all the problems.
or
try this
Small utility that allows you to adjust the transmitter power of WiFi, thus can be great help to save battery life.
Has been done 5 hard dimmer. The apartment is missing 4 or 11 dBm for normal operation. Battery consumption with this sometimes falls on the 60-100 mA.
Nope, dd-wrt is not supported
And I can't install the apk since I don't have internet access therefore I don't have Astro File Manager.
ok try this.
find out ssid broadcast name of ur router from ur sisters laptop.
ask her if its password protected. if yes, get it from her somehow.
then on ur phone do this,
Settings>Wireless & network settings> Wi-Fi settings
turn on the wifi
and select add Wi-Fi network
enter the ssid name in there.
if needed enter that damn password and save it.
voila!
I've tried that but below the network name it says "Out of range".
And my sister ain't here. I don't know if it's my phone that isn't receiving the wireless signal or if it's the router which isn't sending. I'll go later today in a place with hotspot.
Images of the router's settings. maybe there's something wrong here:
http://imgur.com/iJu8n&6TIsH&rkcJk&rKvub
maybe ur sister needs all the bandwidth and blocked ur phones mac id on the router lol
I said above that my sister isn't here now. It's only me so no one is using the wireless.
From what I can see there it's possible that the security on the network could be set to filter MAC addresses, I'm not sure if that is the problem, however at this point I'm not sure what else it could be...
Nah, it's not that.
I've messed around with it(to accepts the phone's MAC, disabled) but still won't work.
I'll go to a mall or somewhere to see if the phone's the culprit here.
Went to the local library and wifi worked smoothly. I've downloaded all the apps I needed(especially Astro file manager). So the router was the problem from the beginning.
Thanks anyway.
Well I'm glad it's not your phone that's the problem, hope you like your 01 and that you get your router working.
Hi,
can you check on which wifi channel your router sends. On my P500 I also don`t see a wifi network above channel 11.
By the way I`d like to know how to enable these channels with my Cyanogen 7.0.2 beta 6.5. I know that there must be some possibilities..
see: http://forum.xda-developers.com/showthread.php?t=576575

Wifi IP address error, Please help!

So my phone randomly dropped it's wifi ability. It cannot find any wifi connections even if I know they do exsist and are running.
When I go to advanced settings it gives me my MAC address but not my IP? Is that the source?
Currently I'm running Mik's cm7 6.6.1 with francos 29082011.
I enable wifi, it says connecting but with no connections available? At least not scanned. But then it stops and says disconnected and can't see any connections.
Anybody know a fix??
Okay, this is messed up. When I tried to connect to my schools internet today it screwed it up. My school is under construction and I guess the internet is a little screwy so when I connected it went online for a second, then added the connection twice and disconnected and wouldn't let me connect to anything or see any other wifi connection.
So I went about to format it and reflash my ROM and I went into my wifi settings and started to delete a few connections. After I deleted both of my schools connections my router NETGEAR popped up! And it works quite well...
I'm so confused as to why this happened.

[Q] Wifi connection problem - Omega rom v35

Hey guys,
Wasnt sure where to post this. Have a question regarding wifi conection settings. I was on omega v34 and everything was fine. My phone connected to all wifi networks I wanted it to. I updated to v35 of the rom and now I have a strange problem.
My phone still connects to my house wifi and work wifi, but refuses to connect to my parents wireless. Ive reset their router, changed the password and removed the settings for the network on my phone. When I refresh and attempt to connect to it all I get is "authenticating" and then it will give up. It is a BT home hub and the strange thing is that my phone will connect to the 'free wifi' BTwifi-with-FON and the BTwifi, but not the proper network zone BTHub3-T2G6. Its incredibly annoying.
Are there any hidden settings in my phone that may have the wrong settings for the network in it?
Any help would be appreciated
EDIT: Just turned the security off on the network and the phone connects fine. I dont understand why the security key would cause problems as it connected before the update and the settings havent changed.
check my sig

Categories

Resources