Ok... i have a phone programmed on my network (VZW) *228 , 1 and *228 , 2 done. Data is working. Messaging is working. The only problem I have not accomplished, is getting the Roaming Indicator to go away... and when people call... I get the roaming message. I looked at the EPST compared to my other phone.... and it looks right. What's missing?
Bump......
There has to be somebody that has an idea on what the PRL / PRI should be in order to get rid of this Roaming issue.
There is a site that shows all of the latest prl's for all carriers...I just tried to find it for you....I know it is over at ppcgeeks....if I find it I will post it back....just changing the prl should fix it....
flyers2114 said:
There is a site that shows all of the latest prl's for all carriers...I just tried to find it for you....I know it is over at ppcgeeks....if I find it I will post it back....just changing the prl should fix it....
Click to expand...
Click to collapse
I've done that... something like colorodo.com/prl... whatever. Did that... and also let the Verizon *228 , 2 load the latest PRL. It's newer than the one on that site. Still says I'm roaming though.
PRI : 2.00_003
PRL : 51056
nitro66215 said:
I've done that... something like colorodo.com/prl... whatever. Did that... and also let the Verizon *228 , 2 load the latest PRL. It's newer than the one on that site. Still says I'm roaming though.
PRI : 2.00_003
PRL : 51056
Click to expand...
Click to collapse
May be dumb question but did you go into the phone settings and check them...
flyers2114 said:
May be dumb question but did you go into the phone settings and check them...
Click to expand...
Click to collapse
As I said in the first thread.... I compared as many settings as I could in EPST to my actual Verizon XV6800... and they match. That's what's confusing.
PRI : 2.00_003
Click to expand...
Click to collapse
This is why you're roaming. This is not a Verizon PRI. You let some other carrier's customizations run. You need to flash back to stock, let VZW customizations run, then upgrade again. It's the only way. Your data may not work either after you flash back to stock, so you may need a DMU reset.
gc14 said:
This is why you're roaming. This is not a Verizon PRI. You let some other carrier's customizations run. You need to flash back to stock, let VZW customizations run, then upgrade again. It's the only way. Your data may not work either after you flash back to stock, so you may need a DMU reset.
Click to expand...
Click to collapse
I was afraid of that. The ERI keeps erroring as well when I try to write "4" to it.. GRRRR...
I'm still trying to get this to work... but with VZW Stock 2.09 and radio 2.13 (because the normal method with the 1.30.60 just says no radio)... and the customizations ran... when in the main screen of WM... it still says roaming. I'm guessing because I haven't programmed any settings yet... IE... phone number.... SID... etc.
Edit:
Ok... Somethings not right. Even after running the stock verizon... letting it "Customize" and then updateing to the latest DCD... In QPST there is still SPCS in the NAM settings areas.... and the roaming is still showing.
Also, If I do a ##eri.. to load the eri.. it gives me a write failure. and.. when I do a ##7764726... for ##Program.. the ERI
reading... fails.
PRI still reads 2.00_003
Is there a way to "ERASE" the device and start over? That way the correct ERI/PRI will be loaded?
I guess because the GPS Radio/Rom from sprint is what ran and did the customizations.... a Verizon Base Non-GPS radio/Rom customization isn't erasing the Sprint data? Even after verizon Customizations... QPST says SPCS.
nitro66215 said:
Is there a way to "ERASE" the device and start over? That way the correct ERI/PRI will be loaded?
Click to expand...
Click to collapse
Nobody????
If you havent already try this, Id suggest re-flashing to the stock vrzn ROM. That may fix your problem, but Im not sure, as I am just taking a stab in the dark.
I've had to do it before and it pretty much returns ur phone to how its "supposed" to be.
loki1931 said:
If you havent already try this, Id suggest re-flashing to the stock vrzn ROM. That may fix your problem, but Im not sure, as I am just taking a stab in the dark.
I've had to do it before and it pretty much returns ur phone to how its "supposed" to be.
Click to expand...
Click to collapse
Been there. Done that. It's a Sprint Mogul. So, the Base system information that gets retrieved after the flashing is done, is all sprint. That's what I want to edit. If I can get the Verizon stuff in the ERI/PRI... I'd be good to go. The phone works as a verizon phone. Text/Data/Email... etc. It just shows roaming.
Ok... I was hoping the new update would fix it. I ran the vzw update on UtStarcoms site... let it update the PRI... and It still says I'm roaming on my Cloned Mogal to Verizon.
GC14... or DCD... Do you know about this?
Related
what do i do? i flashed the kitchen. radio is 3.39 rom is 3.1.2 i have verizon. Maybe i am not installing the Verizon cab correctly? anyone have this issue? i am not actually roaming but i cant setup e-mail to auto d/l cause it keeps telling me i am roaming. every time i get a call it tells me extra charges may apply and such.. how do i fix this?
Thanks in advance for the help.
what do i do? i flashed the kitchen. radio is 3.39 rom is 3.1.2 i have verizon. Maybe i am not installing the Verizon cab correctly? anyone have this issue? i am not actually roaming but i cant setup e-mail to auto d/l cause it keeps telling me i am roaming. every time i get a call it tells me extra charges may apply and such.. how do i fix this?
Thanks in advance for the help.
Click to expand...
Click to collapse
Did you flash the leaked Sprint rom to get the radio?
yes as i dont have the proper sd card to do the "card flash trick"
yes as i dont have the proper sd card to do the "card flash trick"
Click to expand...
Click to collapse
Sounds like you let the Sprint customizations run.
Go into Device Information under Settings and read me what it says for PRI Version and PRL Version.
prl: 51056
pri: 2.03_003
pri: 2.03_003
Click to expand...
Click to collapse
That's your problem. You let the Sprint customizations run and have the Sprint PRI on your phone.
The ONLY fix for this (and still hasn't been proven to fix 100% of the time) is to relock the phone and flash back to stock rom/radio. This will revert your PRI back to Verizon. Once you've finished with that, you also will most likely have to call Verizon and have them issue you a DMU reset, as the Sprint PRI has probably screwed your DMU public key.
Flash back to stock rom/radio, then post back with your PRL version and PRI version.
gc14 said:
That's your problem. You let the Sprint customizations run and have the Sprint PRI on your phone.
The ONLY fix for this (and still hasn't been proven to fix 100% of the time) is to relock the phone and flash back to stock rom/radio. This will revert your PRI back to Verizon. Once you've finished with that, you also will most likely have to call Verizon and have them issue you a DMU reset, as the Sprint PRI has probably screwed your DMU public key.
Flash back to stock rom/radio, then post back with your PRL version and PRI version.
Click to expand...
Click to collapse
k be back in a few
prl: 50895
pri: 1.35_002
so what do i tell verizon tech when i call?
dzmedia said:
prl: 50895
pri: 1.35_002
so what do i tell verizon tech when i call?
Click to expand...
Click to collapse
That you did a hard reset after the phone crashed and it gives the message that it can't authenticate the phone. Do not call #8899 or whatever (I question what that department really does), just call 611 and go to tech support and play dumb and they will get you provisioned.
You may just be better to relock and reload stock rom then 228, or did you do that already? If you are at stock rom and authenticate, you may need to do it again after flashing radio FYI.
serfboreds said:
That you did a hard reset after the phone crashed and it gives the message that it can't authenticate the phone. Do not call #8899 or whatever (I question what that department really does), just call 611 and go to tech support and play dumb and they will get you provisioned.
You may just be better to relock and reload stock rom then 228, or did you do that already? If you are at stock rom and authenticate, you may need to do it again after flashing radio FYI.
Click to expand...
Click to collapse
i reflashed the stock rom and radio R 1.30.60 D 2.09. I tried the *228 and it said phone cannot be programmed...
dzmedia said:
i reflashed the stock rom and radio R 1.30.60 D 2.09. I tried the *228 and it said phone cannot be programmed...
Click to expand...
Click to collapse
When you allowed the sprint customizations to run, you probably caused some problems that can only be fixed by verizon at this point. You will likely need them to reset your akey and reprovision you on the network. Give 611 a call and tell them that you did a hard reset and get that message.
serfboreds said:
When you allowed the sprint customizations to run, you probably caused some problems that can only be fixed by verizon at this point. You will likely need them to reset your akey and reprovision you on the network. Give 611 a call and tell them that you did a hard reset and get that message.
Click to expand...
Click to collapse
just re-*228'd and its good to go. Phone programmed and roaming capabilities updated. No longer showing the Roaming Icon. so now i guess i need to "rehack this puppy" so what did i do wrong when installing the Radio?
dzmedia said:
just re-*228'd and its good to go. Phone programmed and roaming capabilities updated. No longer showing the Roaming Icon. so now i guess i need to "rehack this puppy" so what did i do wrong when installing the Radio?
Click to expand...
Click to collapse
You need to stop at the screen where it says tap to continue. Don't tap.
Instead, force bootloader (power + camera + reset) and load .nbh custom rom by SD, or ensure Activesync is connected (still without tapping ) and flash custom Rom by .exe.
ahhhh Gotcha.. So I CAN ... thanks for the help!!! Both of ya!!! i'll post up if it workded!!
dzmedia said:
ahhhh Gotcha.. So I CAN ... thanks for the help!!! Both of ya!!! i'll post up if it workded!!
Click to expand...
Click to collapse
Yeah, If your on Verizon or other non-Sprint network, don't listen to those people who say to let the Sprint stuff run ... you will likely jack your phone up. It is possible to really cause problems that are difficult to flash out (trust me)
Tell me you checked to see if data worked before you started again...
gc14 said:
Tell me you checked to see if data worked before you started again...
Click to expand...
Click to collapse
I didn't .. hmm.. but i had no problem with data before... why would i have one now? i use my username and the password to set up the data connection
hmm... well guess i should have checked data.. cause now that i tossed on a PPCkitchen rom the data connection will not work getting a wrong login/password error... hmm/.
When you reset your phone, you lose authentication and need to be reprovisioned to work on the network. You may be able to get there with login settings from here, but a call to Verizon and/or a reflash may be a reality at this point.
hmm... well guess i should have checked data.. cause now that i tossed on a PPCkitchen rom the data connection will not work getting a wrong login/password error... hmm/.
Click to expand...
Click to collapse
Serf it has nothing to do with that. It's probably his DMU public key like I said above.
Dial ##778 and then press send. Press Edit, then enter 000000 for unlock code.
Click on View Info, navigate to M.IP Default Profile, and tell me if the values for HA Shared Secret and AAA Shared Secret are blank.
Click on View Info, navigate to Security, and tell me if the values for HDR AN AUTH Password and PPP Password are blank.
For anyone else reading this...it causes SERIOUS problems if you let the Sprint customizations run and you're not a Sprint customer. PLEASE be careful if you're using the Sprint roms to get your radio.
I'm just curious, but after flashing the newest sprint rom and radio, I noticed that everytime I do a soft reset, I automatically get the roam triangle. This stays on for about 10 minutes till it goes to EVDO, or 10X. I am currently using the newest DCD 3.2.0 Rom, for Sprint, and there is no difference. Does anyone know how to prevent this from going into Roam mode when you do a soft reset?
Hopefully this hasn't been answered, and I missed it. If it has, I appologize. Thanks in advance.
Chem
Chemdawg said:
I'm just curious, but after flashing the newest sprint rom and radio, I noticed that everytime I do a soft reset, I automatically get the roam triangle. This stays on for about 10 minutes till it goes to EVDO, or 10X. I am currently using the newest DCD 3.2.0 Rom, for Sprint, and there is no difference. Does anyone know how to prevent this from going into Roam mode when you do a soft reset?
Hopefully this hasn't been answered, and I missed it. If it has, I appologize. Thanks in advance.
Chem
Click to expand...
Click to collapse
Do you know what version of the PRL you're using? It shows up as "PRL version" under Start->Settings->System->Device Information. Someone along the line you might have ended up with an outdated one. 60613 is the latest for Sprint EVDO-capable phones.
Chemdawg said:
Does anyone know how to prevent this from going into Roam mode when you do a soft reset?
Click to expand...
Click to collapse
I can confirm that with 3.2.0 (yes...I've finally moved on from my own kitchen based from Sprint's 3.35.xxx.... ) a soft-reset consistently reverts back to Standard for the Phonerefered Serving System. Over a soft-reset it should retain the choice of Home Only.
In the registry under HKLM\Software\OEM\InitProv\PhoneSetting what can I set to retain Home Only but retain the option to switch back to Standard when travelling?
This is an issue for me since I live by the water and the US is just across a straight leaving my phone often switching between my local and a US carrier.
Keystone said:
I can confirm that with 3.2.0 (yes...I've finally moved on from my own kitchen based from Sprint's 3.35.xxx.... ) a soft-reset consistently reverts back to Standard for the Phonerefered Serving System. Over a soft-reset it should retain the choice of Home Only.
In the registry under HKLM\Software\OEM\InitProv\PhoneSetting what can I set to retain Home Only but retain the option to switch back to Standard when travelling?
This is an issue for me since I live by the water and the US is just across a straight leaving my phone often switching between my local and a US carrier.
Click to expand...
Click to collapse
we probably need the previous version initprov.dll. i will look tonight. thanks for finding this
You're welcome, DCD.. Thank you!
This afternoon I may also have a chance to build a new ROM with a familiar initprov.dll and see if that resolves it.
With 3.2.0 on my Titan I just replaced the initprov.dll (v1.25.0.0) with the v1.21.0.0 (from the March Sprint release and what I was first using in my kitchen), rebooted, but still faced the problem of the phone defaulting back to Standard rather than retain Home Only.
That was without rebuilding a ROM with the older initprov version in.
...to note, the April Alltel ROM was also using this latest v1.25.0.0.
With 3.2.0 on my Titan I just replaced the initprov.dll (v1.25.0.0) with the v1.21.0.0 (from the March Sprint release), rebooted, but still faced the problem of the phone defaulting back to Standard rather than retain Home Only.
Click to expand...
Click to collapse
Certain dll's are self registering and some aren't. It's probably going to take a little more than just a copy/paste.
gc14 said:
Certain dll's are self registering and some aren't. It's probably going to take a little more than just a copy/paste.
Click to expand...
Click to collapse
Worth a shot.. Can't rebuild until I get home......
I realize now that it is related to the radio rom. Originally I installed the NEW factory firmware/rom upgrade. Well that was when it started. So thinking it was a factory rom issue, I installed DCD 3.2.0. Still doing it. So I decided to downgrade back to 3.1.6 which was what I WAS using before the upgrade.. Still doing it. So.. .It has to be the newest radio rom. I am going to downgrade the radio back to what I had and see if that fixes it.
I realize now that it is related to the radio rom. Originally I installed the NEW factory firmware/rom upgrade. Well that was when it started. So thinking it was a factory rom issue, I installed DCD 3.2.0. Still doing it. So I decided to downgrade back to 3.1.6 which was what I WAS using before the upgrade.. Still doing it. So.. .It has to be the newest radio rom. I am going to downgrade the radio back to what I had and see if that fixes it.
Click to expand...
Click to collapse
That's not necessarily true. It could have been something that was installed during the 3.56 factory customizations. Try flashing Sprint 3.35 stock rom/radio, let the customizations run. Then flash 3.2.0 and 3.42.02 or 3.42.30. If you're going to use the 3.56 stock rom/radio to flash 3.42.02, that's ok, just DON'T let the customizations run this time.
that was the issue with mine I ran the sighned sprint cab from the extended rom from the 3.56 "official" rom that was part of no2chems pre 2.2 after i did that my phone was stuck in roaming... Thinking it was the radio i downgraded 1 step @ a time from the 3.42.03 back to 3.39 still roaming went back to the stock radio that came with the 3.35 release still roaming when phone was booted. Figured it might be rom related @ that point so i reflashed to good ole 5069k left battery out after flash for 2 min... first boot it was roaming and would not lock onto a tower in sprint only mode... my muerom boot agent always runs the sprint carrier settings 4 me and on my second boot still no sprint signal only digital roam.. In a last ditch effort I reflashed via activesync the whole 3.35 stock rom/radio ... and wala all was fixed booted right up and even b4 the sprint custimization was started i had the evdo icon and no roaming triangle. Leaving the 3.35 stock rom on there i went forward 1 step @ a time radio wise and even with 3.39 and 3.42.02 i still got sprint coverage and evdo icon and connection. so i re-flashed to the nue 2.2 preview let it do tis sprint thing on first boot. then i did not go in and eun anything from the extended rom. No more roaming triangle. Something in the 3.56 exended rom i ran (sprint sighned whatever) Changed something in epst that dod not get reset even with flashes and hard resets till i relfashed back to stock 3.35 relaease full with radio from activesync.
So my suggestion would be that u can run the newer radio and roms just be sure to let your carrier settings run but don't touch files in the extended rom esp the file mentioned bc it stuck me in roaming and it would not get a sprint signal (home) for anything even after just letting it sit. and when setting roaming option to sprint only I would not get any bars @ all just the animated dots nest to the signal icon.
So it can't be anything in the new rom or settings in the new rom that is doing it nor the radio bc when downgrading back to stock radio from march update it did the same thing.
To fix your going to need to do a fill rom/radio flash then just pick your fav flavors after its flashed and has booted up the second time.
Boy, am I glad y'all started a thread on this. I've been trying to figure out what was wrong since this came out. My first flash of the new rom caused mine to be stuck in roaming, and sometimes it won't even come out.
I'll try what you guys suggested.
Customizations = Extended Rom
That's exactly what I said.
Ok, things a little different now. I reflashed back to the stock 3.35 Rom and let customizations run.
Then flashed just the new radio 3.42.30 from SD card
Last I flashed just the dcd 3.2.0 ROM and the carrier cab, and now no more roaming after the soft reset.
So, maybe the problem is in that radio included with the new 3.56 ROM
As long as I got it working, I'm happy
Ok, things a little different now. I reflashed back to the stock 3.35 Rom and let customizations run.
Then flashed just the new radio 3.42.30 from SD card
Last I flashed just the dcd 3.2.0 ROM and the carrier cab, and now no more roaming after the soft reset.
So, maybe the problem is in that radio included with the new 3.56 ROM
As long as I got it working, I'm happy
Click to expand...
Click to collapse
Again, it's not the radio. It's in the customizations from 3.56.
gc14 said:
Again, it's not the radio. It's in the customizations from 3.56.
Click to expand...
Click to collapse
If all we had to do was not let the customizations run, why didn't someone just say that? I've been asking about this for like 3 days now.
When I tried flashing the 3.56 rom without the Customizations it still would roam, so go figure
If all we had to do was not let the customizations run, why didn't someone just say that? I've been asking about this for like 3 days now.
When I tried flashing the 3.56 rom without the Customizations it still would roam, so go figure
Click to expand...
Click to collapse
That's because you've already let them run. They don't go away after a reflash, the same way Verizon users who let them run can't just reflash their rom to make it go away. You need to flash sprint 3.35, let THOSE customizations run. Then reflash 3.2.0.
Before you do anything though, you DO have Sprint right?
After accidentally running the sprint PRI update on my xv6800, I was stuck with the phone thinking it belonged on Sprint and was roaming. I'm not completely foolish and I did not purposely disregard the instructions; I downloaded it elsewhere and it was labeled as "GPS fix" or some such. Anyway, I relocked, flashed to stock Verizon, called 611 and had them do a DMU reset. No problems, everything worked fine after calling 611. Reflashed to olipro 2.40, radio 3.42.30, and dcd 3.2.0. After flashing everything was fine, I ran the carrier cab, did *228,1 and everything seemed to work correctly. I then ran Sashimi to reinstall my software, rebooted. Well, the roaming indicator was back after reboot. I thought that perhaps the Sprint PRI update cab had made its way into my autoinstall folder, but that was not so. Do you guys have any ideas that might explain how this happened? I am flashing back to 3.2.0 and don't want to repeat this experience
playoff beard said:
After accidentally running the sprint PRI update on my xv6800, I was stuck with the phone thinking it belonged on Sprint and was roaming. I'm not completely foolish and I did not purposely disregard the instructions; I downloaded it elsewhere and it was labeled as "GPS fix" or some such. Anyway, I relocked, flashed to stock Verizon, called 611 and had do a DMU reset. No problems, everything worked fine after calling 611. Reflashed to olipro 2.40, radio 3.42.30, and dcd 3.2.0. After flashing everything was fine, I ran the carrier cab, did *228,1 and everything seemed to work fine. I then ran Sashimi to reinstall my software, rebooted. Well, the roaming indicator was back after reboot. I thought that perhaps the Sprint PRI update cab had made its way into my autoinstall folder, but that was not so. Do you guys have any ideas that might explain how this happened? I am flashing back to 3.2.0 and don't want to repeat this experience
Click to expand...
Click to collapse
When you update the PRI, it does not install into your ROM, it actually updates something inside the phone (similar to flashing your radio/etc). You need to find a verizon PRI ripped from the verizon stock rom (if it is even there) and install and run PPST.exe again. My original post he reposted had said not to install on another carrier in big red letters
Read this here, should do the trick.
After doing yet another relock, stock rom, and *228, I installed the latest PPC Kitchen 5060 rom (set to Verizon) and new radio (3.42.30). As soon as the phone boots, it thinks it is roaming and *228,1,2 does not help at all. I've done all the steps on the thread that serfboreds recommended. It still thinks it is roaming. Any advice?
I just don't understand this. The phone is fine until I install DCD 3.2.0 or nue 5060, after which it thinks it is roaming again. Getting desperate here...
playoff beard said:
I just don't understand this. The phone is fine until I install DCD 3.2.0 or nue 5060, after which it thinks it is roaming again. Getting desperate here...
Click to expand...
Click to collapse
Reload stock and take to store. This is a common outcome after letting Sprint customizations run. It really hoses your phone and can cause irreparable damage.
Any other suggestions?
serfboreds said:
Reload stock and take to store. This is a common outcome after letting Sprint customizations run. It really hoses your phone and can cause irreparable damage.
Any other suggestions?
Click to expand...
Click to collapse
The only problem is that the phone seems to look and work fine when the stock rom is loaded, as long as the DMU reset is done for data. Problems don't appear until I load a custom rom. I can't figure out why the phone shows verizon network (1.35_002 PRI) when the stock rom is installed, but then shows sprint (2.03_003) when I load a non-carrier specific DCD roms and even carrier specific roms (i.e. ppckitchen 5060 for vzw).
I don't know how I can convince a verizon tech to swap when the phone appears normal with the stock rom.
playoff beard said:
I just don't understand this. The phone is fine until I install DCD 3.2.0 or nue 5060, after which it thinks it is roaming again. Getting desperate here...
Click to expand...
Click to collapse
When you do update to DCD 3.2.0, Are you installing the Verizon Carrier Cab?? Also, How are you getting the radio onto the device??
Hmm, works normal with stock rom and radio but funky when you upgrade?
Sounds like you are not loading the radio or verizon carrier as azclown suggests. after going back to vanilla rom, upgrade using gc's newest radio via sd, then load dcd 3.2.0, let his customizations run, then load verizon carrier and you should be fine. Dont load the newest sprint rom/radio.
serfboreds said:
Hmm, works normal with stock rom and radio but funky when you upgrade?
Sounds like you are not loading the radio or verizon carrier as azclown suggests. after going back to vanilla rom, upgrade using gc's newest radio via sd, then load dcd 3.2.0, let his customizations run, then load verizon carrier and you should be fine. Dont load the newest sprint rom/radio.
Click to expand...
Click to collapse
I've been unlocking with olipro 2.40, flashing the new 3.42.30 radio from a microSD card, and then installing the custom rom while still in the bootloader. After installing DCD 3.2.0, I ran the carrier cab and then used *228. Plus, I wouldn't think the carrier cab would be the issue, because I had the same problem when installing PPCkitchens 5060 verizon rom.
-Update: I've tried using radiorefurbish.exe /refurbish to reset my phone to Verizon, but when I run the radiorefurbish.exe using resco explorer, nothing seems to happen. Any more suggestions?
Problem Solved:
I finally resolved this by installing and running this version of radiorefurbish. I ran it using resco explorer with the argument '/refurbish'.
Thanks to you guys and drellisdee at PPCGeeks. You guys rock. I was horrified that I was going to be stuck with the tock VZW rom.
Take the following screenshots (making sure to block out any personal information) and post them:
Device Information
EPST->Security
EPST->M.IP Default Profile
Then, flash back to stock, re-take the screenshots, and post them.
Finally, flash back to 3.42.30 and 3.2.0, install nothing except the carrier cab, re-take the screenshots one last time, and post them.
playoff beard said:
Problem Solved:
I finally resolved this by installing and running this version of radiorefurbish. I ran it using resco explorer with the argument '/refurbish'.
Click to expand...
Click to collapse
I've got the same problem and I reflashed to stock Rom and reflashed to custom. Still stuck in roaming. Could you give details on exactly how you ran resco with an argument?
Thanks
I wonder how he got that working. i've used that file and still have the issue. Yes... I used resco explorer and tried the argument... but got nowhere
nitro66215 said:
I wonder how he got that working. i've used that file and still have the issue. Yes... I used resco explorer and tried the argument... but got nowhere
Click to expand...
Click to collapse
i distinctly remember that one of the customizations after flashing back to stock was radiorefurbish. youve gone back to stock right and loaded the vz PRL?
aguas said:
i distinctly remember that one of the customizations after flashing back to stock was radiorefurbish. youve gone back to stock right and loaded the vz PRL?
Click to expand...
Click to collapse
Yup. and yes... it did run when the Verizon stock ran it's customizations. The PRI stays as sprints PRI 2.00_003. This is the main issue. Also, the ERI is 0. I've tried updating the ERI via ##eri... to the correct 4.eri... but it just gives me a write error. Under ##PROGRAM... the ERI fails to read. Hence my dilemna with the stupid Roaming indicator. I've been back and forth flashing different roms, and am pretty fed up with it actually. This is a Sprint Mogal "Cloaned" as my original VZW XV6800. I left the 6800 in the box.
check this
this wont help for the cloned moguls. But it will help the xv6800 users if they install sprint customizations.
http://forum.ppcgeeks.com/showthread.php?p=401137#post401137
believe it or not, a few months ago i let the sprint customizations run and used it like that just for the better signal...only downfall was no data services....i just switched back to verizon radio stuff yesterday and got my data reactivated
ever since I installed the rom, my wifi stopped catching signals completely. now I just added the data plan on my phone, and the data isnt working either. Any idea what the problem could be?
EDIT: ALSO I have a verizon phone, yet when I soft reset, Alltell shows up instead of the Verizon Logo. Maybe this has something to do with it
fix
What radio are you using?
Have you tried hard resetting and skipping the customizations? I don't see why Alltel would be displayed if you did a fresh ROM flash, as there is nothing associated with AllTel unless you installed the wrong CAB.
Best bet would be: Go to the Radio 3.40.30 thread, download the Unlocker for Olipro 1.2 and most recent Radio...flash the Unlocker, let it get into Boot Loader mode, then flash the Radio. Then it will boot up again, and flash your phone with Olipro 2.4, then flash the 3.2.3 DCD rom. Install carrier cab, and the Arcsoft one if you need it....then you're done.
The data connection may be another story...but I'd first get the ROM up and going, with the ability to make phone calls / send texts.
scotcha12345 said:
What radio are you using?
Have you tried hard resetting and skipping the customizations? I don't see why Alltel would be displayed if you did a fresh ROM flash, as there is nothing associated with AllTel unless you installed the wrong CAB.
Best bet would be: Go to the Radio 3.40.30 thread, download the Unlocker for Olipro 1.2 and most recent Radio...flash the Unlocker, let it get into Boot Loader mode, then flash the Radio. Then it will boot up again, and flash your phone with Olipro 2.4, then flash the 3.2.3 DCD rom. Install carrier cab, and the Arcsoft one if you need it....then you're done.
The data connection may be another story...but I'd first get the ROM up and going, with the ability to make phone calls / send texts.
Click to expand...
Click to collapse
Actually that's the funny part, I CAN make calls and texts. I didn't brick my phone or anything, GPS works fine too. The only problem is the WIFI and data connection - should I still go ahead and try that new rom?
problem
I would definitely suggest the whole procedure, from Radio flash and then further to the ROM reflash.
If after you've done all those things, and your WiFi is jacked, at least in my mind, the things probably broken.
Data connection could just be a matter of password being incorrect, or needing a DMU reset. See if you can do the flash to get the WiFI working first.
scotcha12345 said:
I would definitely suggest the whole procedure, from Radio flash and then further to the ROM reflash.
If after you've done all those things, and your WiFi is jacked, at least in my mind, the things probably broken.
Data connection could just be a matter of password being incorrect, or needing a DMU reset. See if you can do the flash to get the WiFI working first.
Click to expand...
Click to collapse
Do you have aim/msn or something? I updated to DCD 3.2.3 and the wifi works great now. But the data network keeps saying I have the wrong username and password. I even called up verizon for that and they dont know what the problem is. I bet it's incredible simple :/ What is a DMU reset????
Thanks a bunch in advance
EDIT: Also my phone is RIDDLED with alltel settings when it should be verizon, even AFTER all these updates!! I went into the EPST and a bunch of things had alltel. need help fast :/
inbox
check your private messages
Ok pm'ed you back! let me know if you get my email, if not i'll just post it here
I've upgraded and changed to:
NueRom v2.2
Chose Verizon, checked the EPST. Everything looked fine, but the m.IP Default Profile is still [email protected].
I was able to get an A-Key (and a password???) from the rep. The A-Key is pretty long.. does that sound about right? Anyway DATA still doesn't work. Any help is greatly appreciated, I'm trying to get this up and running as soon as possible
If anyone can provide me any information on how to fix this, your help would be greatly appreciated. Basically, i was having an issue with texting and was told the "flash dance" would correct this issue. It has, and now my phone after flashing from the "STOCK SPRINT" rom to NFSFAN'S rom (newest 16th) is stuck in roaming. I am in town full signal with my carrier's towers, but it still tells me im roaming.
EDIT: Update on my issue, I need to be on 'B' only, as well as update my PRL 30337 <- Tbaytel PRL
If anyone can guide me as to how to do this, greatly appreciated
BUMP, Somone please provide me some insight as to what to do, im getting desperate. I will donate to who ever can fix this
Go back
It is in my belief that you need to go back to the stock rom, this has a PRL update option, ultimately, you can flash to a rom that already has this installed. Either of these is easier than trying to update your own PRL (At least I think so). Once this is updated, you should be able to update your radio and then... Flash away my friend, flash away.
still struggling ...lol
mapaz04 said:
It is in my belief that you need to go back to the stock rom, this has a PRL update option, ultimately, you can flash to a rom that already has this installed. Either of these is easier than trying to update your own PRL (At least I think so). Once this is updated, you should be able to update your radio and then... Flash away my friend, flash away.
Click to expand...
Click to collapse
Unfortunatly thats what caused my issue, i used the flash dance to correct my txting issue. Flashed back from the stock rom to my custom rom. Only issue is that no one has my carrier so when i flashed to the stock rom it loaded a default PRL and updated my PRL to SPRINT. Can I use the stock rom to pull the PRL from my carrier? The radio is unaffected by this as i can still make calls and recieve perfect signal. My phone just thinks its roaming.
ROM: NFSF 16th Newest
RADIO: TELUS
CARRIER: TBAYTEL
Back to the begging
Well due to my PRL only being available through my provider, I have to return the phone for them to flash it back to stock in order to update my PRL. If anyone knows how to extract this information i can provide it as a resource for the future. Also should i re-lock the phone before bringing it back? or just re-load stock sprint rom and leave unlocked? I doubt the tbaytel reps are smart enough to tell if its unlocked, due to the fact i told them it was there fault for shipping me the incorrect stock rom. LMAO and they beleive me