Related
Can any one help me do settings for My Siemens SX-56 Settings for Ufone or Telenor (PAKISTAN) Settings. I have tried to do the settings by accessing the web pages of the said companies but its General Settings and i seem to get lost with the complicated way the settings provided by Ufone.
I also need to know how to send mms which i could not figure out at all.
thx
aamer sheikh
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Access point is ufone.plinternet for lahore connections and
ufone.piinternet for islamabad connections and I think it differs from city to city be sure to check with ufone
APN
What is the Access Point Name for Multan?
please help me.
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
Snip, snip.....
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
you should only install this application, you do not have to bother setting up GPRS manually....
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
AWSUMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
Keep Going with your Advises
its so simple and it works
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
Try to Hook with Windows Mobile 6.5 standard or professional
then its simple to proceed
and if no, make a hard reset with your phone to re gain the factory settings and then try
BDW, Which Phone you have...?
Can anybody here give me the mms settings for smart network?
tnx in advance
As far as I know the Wallaby doesn't support MMS, but I could be wrong or you could find some third party software to support it, but out of the box it doesn't.
Regards,
Neil.
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
morph751 said:
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
Click to expand...
Click to collapse
YES MORPH751 pls do help me with the settings, and where can I get ezwap, tnx in a million
Get EZWAP here:
http://www.ccsleeds.co.uk/stuff/ezwap25xda.zip
Thanks to Pete K for the link.
Download and install EZWAP to your wallaby. You need to configure the settings first before MMS and GPRS could work.
As for the settings I'll post them here tomorrow, I documented the procedure and settings (after trial and error) but it's in my home PC. Hope it works for you.
tnx a lot
MMS / GPRS Settings for Smart Network via EZWAP 2.5
Set up GPRS:
1. Start> Settings> Connections> Connections
2. Modify "Internet Settings"
3. Click "New":
Enter a name for the connection: SMART GPRS
Select a modem: Cellular Line (GPRS)
Baud Rate: 19200
4. Click "Advanced":
TCP/IP Settings:
Use server assigned IP address
Enable Use software compression
Enable Use IP Header Compression
Name Servers:
Click "Use server specific address"
DNS: 202.57.96.3
Alt DNS: 202.57.96.4
WINS/Alt WINS: 0.0.0.0
5. Click "OK"; "Next"> SMART GPRS
Access Point Name: Internet
6. Finish
7. Dialling Locations> Connections:
Location: Mobile
Enable Tone Dialling
Area Code: 02
Country Code: 63
8. Click "OK"; End
Set up MMS via EZWAP:
1. Open EZWAPv2> Tools> Options
2. General> Connection: SMART GPRS; Connect Automatically
3. Connection> Connection Type:
Gateway: Enabled
Address: 10.102.61.46
Port: 9201
Disabled: Connectionless Gateway; WTLS secured connection
Timeouts: Default
4. Push:
Enable Push
Connection Type: Address: Blank; Port: 2948
Enable Connectionless Push Gateway
Disable WTLS Secured Connection
5. MMS: MMS Settings:
Message Server: http://10.102.61.238:8002
Sender Address Type: Phone Number
Sender Address: +63920nnnnnnn (enter your phone number
here)
6. MMS Options:
MMS Message Options:
Message Expiry: Max
Enable All
7. Save; End
Good luck!
mms gprs settings
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Re: mms gprs settings
evan_gerard said:
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Click to expand...
Click to collapse
I think it's the same procedure for Globe. You just need to get Globe's IP address and DNS server addresses. Unfortunately, I don't have Globe's settings. You can probably inquire in Globe centers or it may be available at their website. Hope you enjoy your MMS!
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
HELP on MMS Diamond
I'm sure since it's all Windows the settings are either the same or similar right?
I have a diamond, and every time i receive a MMS picture i get charged 10 pesos for GPRS internet connection. Called smart, they said Receiving MMS is free and it is my phone that has a problem. They think that the MMS triggers something, a program maybe, that connects to the GPRS every time i receive MMS pictures.
THey said they cannot fix my phone since they do not carry distribute HTC.
What do i do? Any ideas please
I'm using HTC Fuze here in the Philippines. I just used the NetworkWizard.cab I downloaded. Run it, reboot, and everything works.
i dont know if this is the right section for this question so MODS/ADMIN/GODS move to the right place here is my question first of all I've unlocked flashed/reflashed my cingular with pof's software so thanks to that, but I want to know how to set-up my Cingular 8525 on TMOBILE to send MMS what are the correct settings?any guide?I tried the MDA setting but cant get it to work...so I really need help...Thanks...
25 views 0 replies I'll be patient and wait...
iseedeadpeople said:
25 views 0 replies I'll be patient and wait...
Click to expand...
Click to collapse
Maybe since this forum is for upgrading. I also noticed your post at HOFO. Have you called TMO and asked? I took a quick look at TMO site and it wasnt much help. The "settings" servers/ports from the MDA will work, what is the specific issue. Is there no place to enter the servers or does it look correct and it just doesn't send or receive?
well all the fields to key-in is in there only problem is it has 2 options when im asked MyISP or My Network, dont know where to add modem there and also on the MMS setting there is a The WAP and Secure WAP?so which is which?anybody here using t-mobile MMS with cingular 8525
If your in the uk, you can sign onto my tmobile and they will send the settings to your phone.
To add a new modem you have to go to start>settings>connections> Add a new modem connection
You should specify in the mms settings to use the TMO connection
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
**Mod edit**
I removed your section on how to possibly get free internet from your provider. This board is not for the discussion warez, or anything closely related. If you want to share that type of info do it in private
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 9210
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 1.2
Click "Ok", set this new entry as default (with a red arrow on the icon).
You are all set.
p.s. I can get free internet on my account but not my friends', don't know why, need to have T-MobileWeb service ($5.99) to make it work on their account, eventhough still cheaper than Total Internet service ($29.99)
I never try WAP 2.0 on MMS settings, 1.2 works, so... (port 9210 is default for WAP 1.2, when choosing WAP 2.0 it will change to 8799)
hope this helps
iseedeadpeople said:
only problem is it has 2 options when im asked MyISP or My Network
Click to expand...
Click to collapse
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
iseedeadpeople said:
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
Click to expand...
Click to collapse
Either MyISP or My Network are the name of the profiles.
Anyway, I'll suggest leave "MyISP" alone and create a new profile insted of modify it. (probably modify it works too) It seems like some features are not open to that one.
Afterwards, when selecting network, the new profile go to the upper slot. and the lower slot probably be "My Work Network".
Hi
I am in China but I AM NOT chinese. I have been looking for the way to set GPRS and MMS for This phone forever and couldn't find. I notice we have a chinese friend in this forum. anyone could help me?
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ￥0.03/kb.
settings for China Mobile gprs
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Thanks you very much both of you very appreciated
China Mobile MMS & GPRS setting for HTC Tytn II
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
seems obvious...
af888 said:
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
Click to expand...
Click to collapse
I've been using a Cingular 8125 with WM5 in Ningbo then Shanghai for the past 8 months. The wireless internet has never worked perfectly since I moved to Shanghai, but when I returned last week with my TyTN 2 (Tilt) it never works. I used the same standard setup CMNET, not username or password etc. No error messages, just it never connects. Maybe the TyTN2 actually does have specific settings.
首先我们进入数据连接菜单里：开始—设置—数据连接原来装有前他的连接都删掉还有拨号连接和VPN连接里都是空的有的话也统统删掉跟着按：GPRS连接 进入再按菜单—添加
描叙：移动梦网GPRS
名称：移动梦网GPRS
连接到：WAP网络
访问点：CMWAP
用户名：留空不用填
密码：留空不用填
主DNS：留空不用填
辅助DNS：留空不用填
IP地址：留空不用填
填写完后按完成.代理服务器—菜单—添加
之后就可以设置代理服务器连接了
描叙：移动梦网GPRS(名称可以随意)
连接方：WAP网络
连接到：Internet
代理服务器：10.0.0.172:80
类型：HTTP
用户名：留空不用填
密码：留空不用填
填写完后按 完成—[另注:这个是用来上WWW的代理]再添加:描述:wap连接方:WAP网络连接到:安全WAP网络代理服务器:10.0.0.172:9201类型:WAP完成.再按完成.[另注:这个是用来直接上WAP的,直接上WAP是在包月里的,不要再代理]完成退出到连接菜单在数据连接菜单中按：菜单—完成选项在我的桌面连接到：选internet网络—完成Internet连接：移动梦网GPRS
工作连接：自动
WAP连接：移动梦网RS
安全WAP连接：wap连接 最后就是按完成退出--接下来最后一步就是打开Ie按菜单—选项—连接选择自动监测设置处不要打勾....选择网络：Internet或者wap安全网络..现在就能够实现通过cmwap接入上wap网站和www网站了
that`s all
China mbile GPRS MMS Setting.
Deall All,
I am Using i-mtate JasJam, WM6.1
I used GPRS.Zip then choose the second item named as "中国移动WAP包月". , now I can brows internet, but ca not send and recieve MMS.
CHINA Mobile.
Best Regards.
mlalahoi said:
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Click to expand...
Click to collapse
mlalahoi,
Thanks for the information!
I'm on CM with the 神州行service.
I applied for the RMB20 package & suddenly, my GPRS settings refused to allow me to connect to the internet.
I made changes to the settings & now I'm good to go.
For the record, these are my settings:
Connects to: Internet
AP: CMNET
Username: CMNET
Password: CMNET
IP Address: 10.0.0.172:9201
I need to input the IP address or else I can't find the website I'm browsing to.
Under Connections | Menu | Advanced | Menu | Options, I configured My Desktop connects to: The Internet.
In Connections | Menu | Advanced, I set my Internet Connection to the entry I created for the GPRS connection above & set the others (Work, WAP & Secure WAP) to Automatic.
Finally, in PIE, I set my connections to Internet & uncheck the Automatically detect settings checkbox.
I'm good to go now.
BTW, what type of service are you on? My RMB20 package comes with only 50Mb of data?!
TIA!
Konker
HTC Startrek w/WM6.1 Standard by Erofich
gprs.zip on samsung omnia i900
charlieluo said:
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ￥0.03/kb.
Click to expand...
Click to collapse
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
How to setting wap/gprs and acces internet
Hi I'm,
I'm buy bellwave N81i but couldn't set-up wap/gprs and accessing internet. Anybody can help me? I'm live in Indonesia
thanks
MMS and GPRS setting for the Samsung i900
Hello every one does any one know how to apply the setting for gprs and mms for the i900 samsung
I finally resolved this after a long time. First you have to set up the connection to go to "cmwap", not "cmnet" and configure the proxy settings using one of the methods above. Then you need to configure the MMS mailbox. Open Messaging and choose Tools->Options from the menu. On the list of mailboxes, click on MMS. This opens the configuration. Click the Servers tab and then the New button. Server name is whatever you want, Gateway is 10.0.0.172 (same as proxy), port is 9201 (WAP), Server Address is http://mmmc.monternet.com. The "Connect via" should be the one you already created, then change the WAP version to 1.2. Save this and then on the next screen click on the new name and click on the "Set as Default" button.
Things should now work fine.
Hi i'm expatriate in china and i have a spv c600 from orange, can i use this cellphone for GPRS and MMS if yes how can i setup it ?
Thanks in advance for your help
hey there,your info was very helpfull...i was wondering if you could help with some other issues..i got an htc diamond a month ago and i love it.. but thing is i live in china and i cant find the right pinyin input for my phone...monster chinese and cect are no help.. please assist
another problem is that i have downloaded many games on the phone but most of them wont play..the loading screen comes on and then the screen just goes back to the games folder..please assist..
need help to set GPRS(China Mobile) on P1i
hello guyz , anyone knows to set GPRS on P1i ??
how to make a new internet account for China Mobile ^^
my service is 5 yuan / month ^^
thank you for your answer ^^
Help me plzz
hey friends,
im from pakistan but using china handset, any body can tell me how i set my mms setting in my handset ? waitting for ur reply thanks
oaktree6 said:
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
Click to expand...
Click to collapse
Hey Friends,
im from pakistan but im using china handset mobile (sigmatel T99i)... anybody know how i set mms setting in my mobile ? plz tell me im waitting ur reply thanks
Hey guys,
I have an i-Star i-8016b but I cannot find any settings or extra languages for it!
Please Help!!
SOS for blackberry storm
hello guyz I'm in China and i'm using a BB Storm, does anyone know how to set GPRS on blackberry storm?? I'm using China Mobile ^^
my service is 50 yuan / month ^^
thank you for your answer
Hi,
I am not able to access the internet with mobile access point networks. Few things I tried -
1) Tried to send s<IMEI> (15 digit) no to 52586 but every time I got message like this "Please send the IMEI no in proper format.." then I tried with only IEMI no not the S... nothing happened. I did not get any setups.
2)I tried to add one APN in the setting with the specific values found in vodafone india website(manual setting), and enabled it but nothing happened.
Please help !!!
I have same problem with UNINOR.
Manual APN works fine,not able to get APN from service provider.But AIRTEL gives pre-confingured settings
I Was Able To Connect
This is what I did to make it run, I was not able to get certain widgets to connect tough, but was able to browse the net.
1.> Goto
Settings -> Wireless Controls -> Mobile Networks -> Access Point Name
Create a new access point and name it "vodafone live"
Input these Values
Name : Vodafone Live
APN : portalnmms
proxy : 10.1.1.100
MCC : 404
MNC : 27
APN Type : default,http,supl
rest leave unset.
2.> Go Back put a tick next to the apn name now.
3.> Enable Data Traffic.
4.> Restart your phone
Try and see if you are able to connect or see 2 arrows in the notification area.
-------------------------
Peace "V"
A State Of Mind (For Loosers )
Dear Junior Member, First Thank for your reply. Now I have these issues.
Whenever I try to put "MNC : 27" the APN setting vanishes. ????
I tried to put the default MNC : 30 ..it worked with browser (with port 9401)...but I cannot log in gmail account, it shows no network connection, try again like that. Even I have two widget for weather update, that also does not work.
PS-- weather widget worked with wifi conn, when my phone was rooted, I tried to change the f*** icons that comes with the phone. Then to solve the issue for network connectivity I repaired the software so, I suppose my software is untouched.
Please help.
Now I can get the internet with this --
Name : Vodafone Live
APN : portalnmms
proxy : 10.10.1.100
port : 9401
MCC : 404
MNC : 30
APN Type : default,http,supl
but still cannot get connected with gmail app or weather widget
Apps do not work with Vodafone live, for them to work you'll need Vodafone Mobile Connect which is expensive.
Better use Airtel for the internet access dude.....
It costs ok and speed is good enough
Widgets and Apps
Widgets and Apps do not work with those settings, dont know why till now. I tried with the Vodafone Mobile Connect (their 3g Stuff). Insanely expensive. Try Airtel as suggested above.
I even tried registering a complaint with Vodafone store, they say its resolved. Lets see what happens.
hey please do something !! vodafone is carrying me mad !! cannot use any of the app or widgets !! i did rs95 recharge!! bt works only in browers!! I cannot switch to new number as i have this num. more then 4 yrs old!! plzzzzz do sumthin!!
I tried with port no 8080 ...but also it's not working, I dont want to use another no...
I hope with 2.1 this thing will be resolved !!! By the way, it will be great if someone gives the config for - "Vodafone Mobile Connect" ... I want to use this until the update comes.