Hi there.
Ok so I am trying to install NET v3.5 after the standalone goes to the WMDC installer and pushes the file to the device it, the device goes to teh installer and then immediately says it is unsuccessful. Can somsone tell me whats going on?
I am really confused.
Related
Hello @ all. I'm new here and my English is not that good that it should be, so please excuse my mistakes.
I have got a problem I want to install a new ROM on my PDA Phone (XDA Wiza200 G4). I started with this HardSPL. The winwo popped up i pressed "Check DOC", than i got an white screen on my Phone. After this the Tutorial is starting, when I agree to all the questions, the prog should install this SoftSPL, right? But then i am always getting an ERROR, Vista says that this prog is not working normal, and vista is searching for an solution. At the end Vista is closing the Prog and all the Installation is ****.
I am hoping you can understand my Problem and give me an solutuon. Thanks
WinXP is highly recommended,Vista still has problems.You better try it on WinXP.HardSPL will only get installed on WinXP.
Now I've got a problem. Is there any other solution?
Use microsoft "Virtual PC" and install XP ??
Dual boot and install XP?
Sorry posted this in the wrong topic
right click on the ruuupdate.exe file and click properties then click on the compatability tab and click run this program in compatability mode for xp sp2 and make sure the run as administrator tab is ticked too.
Works great for me and i have vista ultimate sp1 and i have had no problem installing roms. I would also enter bootloader mode manually before flashing, i do because certain roms come back with a 260 connection error
Hello People,
I've installed Windwos 7 and now my computer don't see my drivers for the phone... So i tried to install the phone drivers from cd.. that's go perfect, only when i'm pluggin in my phone... it's get a error.. the error say's.. usb device not recongnized ??
So somebody have any idea??
Thnks for you're support.
Do you really think, there will be drivers for a beta OS avalaible? Forget it...
4omega said:
Do you really think, there will be drivers for a beta OS avalaible? Forget it...
Click to expand...
Click to collapse
i'm not stupid.. but maybe somebody know the solution ??
Windows 7 update
I let the operating system do an automatic update when asked if I wanted to search for drivers for my s740. It downloaded most of the appropriate software bits like the windows mobile device center and the radio driver I think. It however did not download the actual s740 driver. An install gone wrong I think.
No matter how many times I unplugged and re-plugged it back in all I saw was unknown device in the device manager. I then selected to update the unknown device driver and let windows seacrh for it and it did the trick!
Hope this helps.
thnks.. but only it's not the solution. he still saying unkown device. Maybe you can find out what the drivers ar, and share them with me over here??
thnks
Delete the unknown Device in the Windows 7 "Device Manager". Than install the latest "Microsoft Windows Mobile Device Center". Now ist should work.
thnks for the new sugestion.. but this is not working either..
The first step, delete it - no problem
Installing the Windows Mobile Device Center - from microsoft site.. download it. Is perfect
When the pop up screen coms, to my computer there is standing installing the drivers.. (Perfect whe thing)
Then come's the error.. The big red cross.. It says, you unpluggd you're device.. ?? Crazy thing.. i did not.
So any body have a new solution for this.. Or please post the drivers....??
Hell Guys, here's my update to my problem. It's solved.
I'm was going to Windows/Configurarion Screen/Software
There i'm deleting everything from mobile device mananger and, than in device mananger i'm deleting the only device that hase no drivers (my phone )
Plug in and windows do the rest..
thnks for the help people..
Hey guys,
When I bought my Omnia 2 with WM 6.1 on it, it worked great but when I went and installed the stupid PC studio software that came with the phone I tryed to update and now my phone has either a thing saying
"DOWNLOAD MODE!
Do not turn off.
It takes about 10 minuites."
or it will have a symbol of a phone connecting to a "!" next to a computer symbol.
I can no longer use this phone if anyone can help me it would be very much appreciated.
Thanks.
hahaha to funny bricked means it no longer turns on meaning you don't even get the download mode. its just like a useless brick. But anyways to the problem at hand, there is only one way to brick the omnia and that is if you flash the eboot which you have not done since it still works and turns on.
Unplug from USB cable and turn it of and/or take out the battery. Put the battery back in and plug it into your PC and try to update it with PC studio and see if it works it should not have an issue. Repeat the steps if it fails but this time start PC studio first and then plug in the omnia and see if that works.
If all else fails you need to get OCTANS and download the official firmware for your region or a custom firmware if you want. I'm assuming you have a I8000 which OCTANS is used to flash don't know if that is the case with other omnia 2 as well. Visit this site and look for OCTANS and all the firmware you need. Since you are flashing anyways i would recommend you flash JD3 ROMS so you have the latest. Either go official ROM or go Lite i myself am using tw2 lite ROM.
I went to that site and nothing on there says anything about "OCTANS" so could you possibly give me a link of some sort to what I need.
I've tried running PC Studio on XP and Vista with no luck on getting the computer to even see the phone anymore so I've just about given up on the whole thing.
heavywater said:
I went to that site and nothing on there says anything about "OCTANS" so could you possibly give me a link of some sort to what I need.
I've tried running PC Studio on XP and Vista with no luck on getting the computer to even see the phone anymore so I've just about given up on the whole thing.
Click to expand...
Click to collapse
Here is the Octans Downloader's latest version. Just run it (If you are using Windows Vista or 7, set compatibility mode to Windows XP SP2), select the appropriate parts in various slots, click Detect Device and then turn off and plug your phone into usb cable. It will detect the phone, then just press Start and wait for the process to complete.
In addition to these steps, you might also need to update activesync drivers and install Samsung CDMA Modem drivers if you are using Windows 7 or Vista. For more details, see this thread :
http://www.modaco.com/content/b7610-omnia-pro-b7610-modaco-com/299070/tut-flashing-rom-using-octans/
I hope you get back your phone soon!
Good luck and Cheers!
same problem - cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between.
unable to hard reset, unabe to flash - octan does not detect the phone...
any chance to save my phone?
1. get the ROMs from modaco site.
2. Start Octans and follow the ROM update guide in modao.
3. Click detect in Octans.
4. Power off phone (remove battery and insert back in ur case).
5. connect phone to PC/laptop (do not use any usb hub).
6. u shd see the download button becomes ungrey. click it to flash.
the download button remains grey......
what OS are u using?
If it's vista or win 7 and whether it is 32bit or 64bit.
The solutions are at modaco.
i read modaco.
the device is stuck: when i turn it on, the screen shows only one image:
an image of a mobiel device, a pc, and in between a (!) sign.
cannot hard reset device, cannot do anything.
am using vista, and followed all protocol from modaco (first time was able to flash - thats how the device got bricked).
octans (or the pc) does not detect the device when i connect it to the - that is the problem...
OK I now have installed the CDMA drivers and i'm running OCTANS in XP SP2 mode what OS should I download to use with the phone and how big will it be?
Thanks so much for the help guys.
And btw is there any versions that will keep the samsung virtual keypad and things like that (not the damn cube though)?
like i menchioned get a lite ROM I use tw2 ROM's Garys are good to. I like tw2 ROM because they are totally stipped ROMS except for samsung dialer and SMS and he gives cabs of all the apps so people can restore what they use. Garys is also very nice lite ROM with the basic apps that mainly everyone uses. Its your choice really what you want you can install the JD3 stock ROM as well, but why? when these lite ROM's giuve you more RAM.
As for drivers you may need to search on the site i don't have the links because there are new updated drivers for windows 7 which should work on vista too. When using octans make sure to hit detect and then plug in the phone (phone must be off) then click start. You only need to flash the PDA unless other parts messed up during the update, you won't know till you flash.
Driver installation:
1.) Turn off Phone
2.) Plug into PC
3.) Let it install the default drivers
4.) Go into device manager
5.) Go under the phone menu
6.) Update drivers and follow the steps and when asked which location point to the driver you just downloaded.
flash i8000
PROBLEM-HEPL pls..
cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between!
unable to hard reset, unabe to flash - octan does detect the phone, but flash phone image and error (the end)
octan write: [Setup:0] PDA Device removed.
[Setup] Windows XP
[Setup] Download Ram Size :41777920 bytes,(39 MB)
OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&ed04620&0&4#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
[Down] CSC Image.
[Down] MoviNAND Image.
[Down] Phone Image.
[CSC:0] Download start 0x0
[CSC:0] ----------------- Information of Multi CSC Image ------------------
[CSC:0] Verision:[I8000ATOIJ8]
[CSC:0] SalesCode:[ATO]
[CSC:0] Priority:[0x1]
[PDA:0] LANG_ID:[7][0405]
[Phone:0] Download to 0x0
[Phone:0] StartOffset: 0
[Phone:0] EndOffset: 16777216
[MOVINAND:0] Download start 0x0 and all!! :-(
I have win 7 32bit..driver install from modaco..octans (setting XP service pack3), restart..but cannot flash..HELP please? Soory, my bad english...
Today I tried to install 6.1 working rom on my PDA.
Because I had germany language on it..
So I followed the guides on forum tried to install with windows 7 ultimate.
First I flashed correctly then after that I had black/white screen and red light.
After that it run update utility but failed updateing said your PDA is not connected to a PC error 260...in device managaer it showed "Unknown device" so I messed around couple of hours but still couldnt get it fixed tried to install USBAS drivers but windows 7 said its not 32-bit windows drivers. So i dont know what do next.
I switced my phone off again and windows was starting normally n its still german so practically no harm was done.
Hello, im trying to get rid of the stock, heavy and crappy ROM from SONY and install a lightweight ROM with 4.0 or higher.
Im stuck at the very first steps though..
Installed JAVA SDK + Android SDK plus the Google Drivers. I downloaded a newer USB driver linked in a thread in XDA.
I connect the phone using the MENU button and the driver installation begins, BUT the driver fails to install.
In Windows8 Device Manager, i can see the S1Boot Fastboot device marked with an exclamation mark. Trying to update the driver manually, selecting the driver that i replaced the older one, in the android SDK/extras/google/usb (or something) gives me an error of incompatible devices and fails.
Any help please?
BLiapis said:
Hello, im trying to get rid of the stock, heavy and crappy ROM from SONY and install a lightweight ROM with 4.0 or higher.
Im stuck at the very first steps though..
Installed JAVA SDK + Android SDK plus the Google Drivers. I downloaded a newer USB driver linked in a thread in XDA.
I connect the phone using the MENU button and the driver installation begins, BUT the driver fails to install.
In Windows8 Device Manager, i can see the S1Boot Fastboot device marked with an exclamation mark. Trying to update the driver manually, selecting the driver that i replaced the older one, in the android SDK/extras/google/usb (or something) gives me an error of incompatible devices and fails.
Any help please?
Click to expand...
Click to collapse
I guess Google will help you better here bro.. Because your problem you know better.. Its difficult to find the reason behind the failure of driver installation.. There can be infinite number of reasons.. You cannot predict.. Search the error you are getting.. You will find your answer..
Sent from my MT11i using xda premium