Related
I have updated my phone x01ht WM5 to custom WM6 firmware,
before installing the wm6, i had install the Hard_SPL-V7
i wanna know, if i want to flash again to other wm5 roms, how could i do?
because when i was trying to flash the wm5 dopod rom (it loads the loader) but stop flashing, error said USB connection failed..
any advise pls reply, thanks... i am very noob at this level
Follow THIS guide. You will be able to downgrade to WM5 again but it is not as simple as running the RUU.
(pof im adding the warning dont worry)
I read and i dont understand.
I have a niki ( htc dual touch) blocked to an operator.
I want to debrand unlocking is no so important.
What i have to do to instal a new rom.
In my TYTN2 i instaled hardspl....but with niki i dont realy what to do!
I read a post regarding spl in this forum but i didnt understand what to do.
Thnks in advance
Since you already have a Tytn II with HardSPL installed, I think you'll easily understand how to do to CIDunlock your Niki, so I'll quickly remember it to you.
Download the SSPL.EXE and HARDSPL 1.16 or 1.15 zips form the HardSPL/USPL topic, copy SSPL.EXE on your Nike, launch it (your device will reboot overriding the SPL), and then run a RUU with the HardSPL.nbh (I guess you know how to flash with your Kaiser).
10 seconds after, you'll have a CIDunlocked Niki on which you can flash any ROM you want
Thnks a Lot. You make lighT
!!!+++***PLEASE, PLEASE, PLEASE NOTE! THIS IS ONLY GOT G4 WIZARDS!!! THIS GUIDE IS NOT INTENDED FOR G3 WIZARDS IN ANY FORM OR FASHION!!! IF YOU FOLLOW THESE INSTRUCTIONS AND ATTEMPT TO UPGRADE A G4 WIZARD WITH THEM, YOU WILL BE THE OWNER OF A WHITE PLASTIC BRICK!!! NEITHER I NOR XDA-DEVS WILL BE HELD RESPONSIBLE IF YOU BREAK YOUR WIZARD FOLLOWING THIS GUIDE!!!***+++!!!
Hey all, since most people are asking for pictures and such on how to upgrade G4 Wizards to Windows Mobile 6 or better, I have gone ahead and made a text guide, with screenshots to follow along with, that also includes all of the files needed to upgrade a G4 Wizard with(along with credits to their coders.). It is uploaded to MediaFire, and the link is at the bottom of this post. Here is whats included:
How-to text guide, written by Myself
The Wizard Service Tool, by mestrini
The ActiveSync Setup.exe, for people that dont have it already
and SoftSPL, by the exuinoxe
PLEASE NOTE!!!-I did NOT include any ROM files with this package, YOU MUST supply the ROM of your choice yourself(this is stated in the guide aswell.).
Yes, it IS a SoftSPL guide, seeing as NO n00b understand how to make the HARDSPL method work. It is(imho) well written, and all of the screen shots are marked with arrows and such as to what to do next...so please, everyone download it and make improvements, criticize whatver. And please note!!
I DO NOT WANT ANY KIND OF DONATIONS FOR THIS THING!!! I have had 3 people send me money for this guide from my forums, and it should not come to me. IF YOU GET SOME USE OUT OF THIS GUIDE, THEN PLEASE DONATE TO EITHER XDA-Developers, OR TO THE ORIGINAL SOFTWARE AUTHORS, NOT TO ME!! Thanks!!!-ashasaur
DOWNLOAD LINK-(filesize approx-13.15mb)-http://www.mediafire.com/?hzbx043cglm
Great guide. I think it might flow better in a html format or posted on the forum here with the images linked offsite?
Hey, I'm a noob(ish) and I've managed to unlock my phone through HardSPL. Didn't think it was that hard.
But of course the 2 and a half years of Computer engineering school plus work experience manually loading roms into memory from the bootloader on an embedded system couldn't of hurt.
Can not find the upgradr guide
Hi ashasaur,
I am trying to download the upgrade guide from http://www.mediafire.com/?hzbx043cglm but it says not available, is there another way to wownload that please?
Thanks,
Sam
well, ive just tryed it, and it seems to still be there...try again perhaps?
Thanks
WORKS fine. Nice guide. Easy to follow.Thanks...
WM6.1
Hey guys,
I was wondering where can we find WM6.1 rom??? Also, would it work on an HTC wizard G4? Are there extra steps involved?
By the way, I'm running TNT 1.9199 Rom... If I upgradew to WM6.1, will it wipe out this rom too?
Thanx,
Phil
Cphil1 said:
Hey guys,
I was wondering where can we find WM6.1 rom??? Also, would it work on an HTC wizard G4? Are there extra steps involved?
By the way, I'm running TNT 1.9199 Rom... If I upgradew to WM6.1, will it wipe out this rom too?
Thanx,
Phil
Click to expand...
Click to collapse
Upgrade to TNT 19213 series,its wm6.1. Yes ! flashing a new rom will completely wipe out and replace the existing rom and files,its just like formatting the Hard drive of pc while installing a new OS.
can u give me a rom pls i only have my spv m3100 for one day and the guide is very easy to follow but i don't know what rom to use please help
I start Wizard Service Tool an click on [Enable Rapi. and Unsigned Apps].
After this it comes about 20 seconds later that all is ok an i can do the following steps. When i go to Device Info i get this:
On Wizard Service Tool i have got this Message:
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
Can anybody tell me why?
I have try softreset an do all steps again. Not better.
Engersen
are you using a G3 of G4 device? Again I say, THIS GUIDE IS ONLY FOR G4 WIZARDS!
I have got a G4.
My Wizard show on start IPL 2.21.0001 and SPL 2.21.0001.
Any ideas for my Problem?
Thx Engersen
hmmm, I would just go ahead and skip that step then, and start after it, with the SoftSPL and such. Just read and you should be fine.
Really? Without Wizard Service Tool?
I can try it. I hope all works great after this.
WST is not interest because SoftSPL do the temporary CID Unlock. Right?
Engersen said:
Really? Without Wizard Service Tool?
I can try it. I hope all works great after this.
WST is not interest because SoftSPL do the temporary CID Unlock. Right?
Click to expand...
Click to collapse
Sometimes, 'EnableRapi' and 'Cert_SPCS' doesn't get executed automatically by WST Tool,so its recommended to manually copy and paste these two files in the phone and execute them,you'll find these files in the installation folder of the Wizard Service Tool folder in the 'Files' folder in the Program Files on C:\ drive.But WST Tool doesn't CID unlock a G4 device,so if you want to upgrade,then read and follow the methods 'SoftSPL or HardSPL posted as stickies in the this G4 forum.
Yes i know that WST is not unlock CID.
I use the package from first Post. There is SoftSPL inside to unlock. Right?
Ok, i think i have following steps to do.
Copy both files 'EnableRapi' and 'Cert_SPCS' to Wizard and execute them.
Then Unlock CID with SoftSPL and follow all other steps from Userguide of Package from the first page. Right?
Thx for help and greetz from Germany
It ist possible downgrade back to WM5 if WM6 is not my like?
Engersen
of course, though you will need to follow one of the downgrading guides here on the forums, as I do not know the exact steps.
Ok, thank you for help. In German all was easy for me. Now i want to ask for everything
Downgrading to official wm5 depends on the method with which you upgraded. If you upgraded through SoftSPL,there's no further procedure,just flash the official rom,coz SoftSPL doesn't change the official original IPL/SPL,but if you upgraded through HardSPL,than you'll first have to remove HardSPK revert back to original IPL/SPL and then flash the official rom,as HardSPL flashes the patched IPL/SPL and its changed.
After flashing my charmer with wm 6.1 it was stuck at the Boot Screen and my phone no longer made a hard reset as it give formatting failed error.
Then i went to download an official WM5 rom from Tmobile, then I went into bootloader and successfully flash the official ROm. But again format error
Now it just shows
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
I tried the prophet ROM flashing as advised somewhere else but it failed at 95% giving me invalid nbh error
In the past I had successfully solved the problem by flashing the prophet ROM but this time .......
Any complete help or specially cooked Prophet ROM for this type of recovery...
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
rmagyar said:
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
Click to expand...
Click to collapse
But this is for recovery puposes as described somewhere else
Nobody seems to be interested to take pains in solving my problems
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
ChrBeck said:
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
Click to expand...
Click to collapse
Thanks Mr ChrBeck!!!
But I think that some way of downgrading the the SPL to 2.?? from the current 3.08 would allow me to install the PROPHET ROM for recovery and then it would be possible for me to upgrade to orignal WM5 ROM and then upgrade to your lovely ROM that I had before your latest upgrade.
Am I right or if not then can you give me the necessary files and instructions for the sd card recovery method.
Please help me as no one in my locality knows much about CHARMER and simply unable to help me in this aspect.
Thanks again.
Dr.Zia ur Rehman
I'll try to help you. In the Wizard forum there is a sticky whitch tells how to do the SDrecovery. Just search it. With the SD Card you can just fully flash a ROM. You can't downgrade anything because downgrades are looked.
If I'll find the sticky this evening I can post the link here.
Cant there be some kind of HARD SPL for this ..... charmer that would allow me to flash the prophet ROM fully. In this way I had recovered my CHARMER but I think that at that time it had lower version of IPL or SPL so the full PROPHET ROM was sucessfully installed and I was able to hard reset and flash the orignal T-Mobile ROM that I think upgraded my SPL too!!!
There is no hardSPL. Noone ever designed one. And if the Prophet trick doesn't work you can try it with a G3 Wizard ROM too. But if that doesn't help to search for the SDUpdate!
To do an SD update you must have a ROM dump on SD card from bootloader.
Method can be found here. Section 8. OS, GSM Image Reflash Procedure
Thanks for finding it for us. There was a time I read this manual completely but I don't know much of it anylonger.
Charmer needs to be CID unlocked to perform SD card flashing.
I agree. I just forgot to mention this.
Then forget it. You can't CID unlock a 2.x or 3.x. So this method is out.
How can I confirm that my charmer is CDI unlocked???
Any if this is the case then what to do with my poor CHARMER....
ANY HOPES OF ITS RECOVERY in some other manner???
Also can you post link to the wizard ROM you mentioned in your post for recovery ???
THANKS IN ANTICIPATION !!!
Well, you have a boatloader over 1.x right? If so your device can't be unlocked. But you can try to flash any WM5 ROM for Wizard. But be sure it is jast the ROM. No phone or bootloader in it.
Maybe that works.
Would you be kind enough to post a link to the proposed ROM to which I can give a try?
Is this would be possible to flash any specialiy cooked Prophet ROM only with OS as the complete Prophet ROM (with no ID RUU)gives me error at 95%.
Further isn't there a way to downgrade my spl that would allow me to flash prophet ROM that confirmly worked for me in the past.
Please help i am in great trouble.......
I am reading forums for few days now, i would like to install WM 6.5 on my touch dual, but i just dont get what i need to do. Is there some step by step tutorial.
Also, i am interested in android too, i tried one of them but it was poor. Is there some android for htc that actually works, and can be used normally?
Thank you
First off all, welcome.
If you just want to know how to start just read the first two stickies of this thread.
Regards,
Yes i read stickies but i dont get what i need to install, that is in what order, and which ROMs i need to use.
marijan_e said:
Yes i read stickies but i dont get what i need to install, that is in what order, and which ROMs i need to use.
Click to expand...
Click to collapse
Hmm, okay first we need to know what type off phone you have, you can find that under your battery, by me it's displayed Niki100.
Second one, which is important, is your device simlocked.
Regards,
I have it too Nikki100
No it is not sim locked
Okay, sorry for the late reply, but I was at my work, and also tonight I have to leave, if you don not have a simlock the only thing you have to do can be found here http://forum.xda-developers.com/showthread.php?t=631493 just read carefull and if you still don't know how it works just let me know and I will help you.
This is how i did it:
1. I just started at step 4, and copied the sspl 1.16 to my phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Thats all, I'm not sure if it is the right way but it worked for me.
Important:
Use at your own risk! I'm not responsible for any damage to your device.
Regards,
Ok so i run sspl 1.6 and i got the phone in bootloader mode, connected USB and nothing happens. What i should now try to put wm 6.5 ROM?
marijan_e said:
Ok so i run sspl 1.6 and i got the phone in bootloader mode, connected USB and nothing happens. What i should now try to put wm 6.5 ROM?
Click to expand...
Click to collapse
No, before you flash a rom, you have to flash Hardspl 1.22
Greetz,
You did not mentioned hardspl above?!?!
and what about that radio ROM do i have to flash that too.
I dont get you, so i run sspl, and i get bootloader, what now, do i flash hardspl while in that bootloader or?
marijan_e said:
You did not mentioned hardspl above?!?!
and what about that radio ROM do i have to flash that too.
I dont get you, so i run sspl, and i get bootloader, what now, do i flash hardspl while in that bootloader or?
Click to expand...
Click to collapse
Hi again, you only need to flash Hardspl 1.22 or 1.15 but they say that 1.22 is better, and yes you can do that in bootloader.
And why you have to do this is, because if you only use sspl you have to do that everytime you want to flash a rom with hardspl you only have to do this once and you can flash all the rom's (for the Niki) what you want, so this means if you can succesfull flash the hardspl 1.22 you are done with this and you can search for rom's you like
Hopefully I'll gave you enough information but if you want to ask something you can always ask, there is just a small thing with the radio but I explain that after you did the hardspl.
Greetz,