I found out recently (after installing Spb GPRS Monitor) that my GPRS connection is so slow at around 10kbit/s. I have upgraded to ROM 1.60.00wwe and Radio 1.08.00. My operator told me that I may have too many programmes running, but I tried stopping all applications before connecting with no improvement. Please help!!
Does anybody know how to set up a M1000 to a laptop with BT on it so that it uses the GPRS connection?
Also is it possible to use Activesync over BT?
The only services my laptop can see on the phone are SSA and voicegateway.
I'm using WM2003SE mysterymans orange rom but there was no difference before i upgraded.
Cannot seem to get any widcomm/toshiba stacks to work at all on this.
Hello
Please help me
I need to run gprs in my xda1 and using irda connect to my laptop.
So in general i need to surf internet at my laptop using gprs connection at my xda through irda.
i hope you understand what am i talking about...
http://forum.xda-developers.com/viewtopic.php?t=5751&highlight=wmodem+instructions
http://forum.xda-developers.com/viewtopic.php?t=9747&highlight=wmodem+instructions
ftp://xda:[email protected]/Wallaby/Tools/WirelessModem_Instructions.zip
Stefan
Hi
I update my cingular / att 8525 with the new rom that replace the wireless modem with the internet sharing. The internet sharing worked fine.
Some time when my home high speed internet goes slowly, I use my 8525 as a wireless modem to connect to my work computer via Cisco VPN version 3.66.
After upgrade to the new rom that uses internet sharing, I cannot connect to my work computer as before the upgrade. As soon I run the VPN Client, and the VPN do all registration, I not longer have internet access. When I run Remote Desktop to connect to my work computer, I got an error that I can't find the computer. If I open the internet explorer (IE) to go any site, the IE can not find any size. If I disconnect the VPN connection and repair the internet sharing I can browse the internet.
I contact the HTC support with not result. I want to know if someone that has not upgrade the rom yet, can send me the wmodem files from the windoew directory to see if I can get the wireless modem working or if some one has any correction options.
Regards,
Gilberto Fres
The latest Cisco VPN client (v5.0) fixes this.
I installed the Cisco VPN version 5 in work computer to test. I disconnect from the network and create a bluetooth connection between my 8525 and the PC. I got internet access thru the phone. I launch the VPN and the VPN connect to the network. I check for internet access and was still there. The only problem is that when I ping any computer in my work network, I dont get any reply. I still can't connect to any computer in my work network, but this time with this new version of VPN, I'm not losing the internet.
If posible to get the WModem software that is the wireless modem instead of internet sharing?
Regards
Gilberto Fres
Sounds like a bug that was in the Beta v5.0 client. Are you connecting to a Cisco VPN concentrator? I'm using a 3020 w/o issues on the production client (has official Vista support).
My laptop runs Windows XP however..
gilfres said:
I installed the Cisco VPN version 5 in work computer to test. I disconnect from the network and create a bluetooth connection between my 8525 and the PC. I got internet access thru the phone. I launch the VPN and the VPN connect to the network. I check for internet access and was still there. The only problem is that when I ping any computer in my work network, I dont get any reply. I still can't connect to any computer in my work network, but this time with this new version of VPN, I'm not losing the internet.
If posible to get the WModem software that is the wireless modem instead of internet sharing?
Regards
Gilberto Fres
Click to expand...
Click to collapse
Possibly because DNS isn't working thru the VPN client? Can you ping or RDP by IP address?
Or, do the hard coded proxy settings affect VPN? Have you tried disabling the proxy?
Hi
The version of the Cisco VPN is 5.0.00.0340. I'm connecting to cisco 3000 server. If I trying to ping any computer on my work network after the VPN connect, gave me time out all the time, but I could connect to the internet using the Internet Explorer.
Playing with this yerterday, in the control > network connection, I pick the property of the connection made by the 8525. I went to the properties. In the Advanced tab I click the option "Internet Connection Sharing" to see if the VPN work and I received a message that the connection to the internet can be lost. I lost the connection and went back to the property dialog box. When I click the Advanced tab, the all "Internet Connection Sharing" section not longer showing up in the "Advanced" tab.
Right now the phone connect to the PC, but I don't have any internet in the PC. How I can disabled this "Intenet Connection Sharing" when this doesn't show up in the Advanced tab of the network connection properties?
Regards
Gilberto Fres
I've got the AKU3.5 ROM loaded on my 8525 but I've not tested the Cisco VPN client with it. My responses have been based on my TyTN which runs my WM6 ROM. I'll pair up my laptop with the 8525 later today and test.
Sleuth255
Did you test your 8525 with the Cisco VPN Client?
Gilberto
Forgot about it.... I'll be home in 2hrs & will test then.
also: are you tethering via USB or Bluetooth?
Testing complete. Tethered my laptop to my 8525 using USB. Connected to my 3020 concentrator with Cisco VPN client v5.0.00.340, logged in and successfully browsed to our internal-only (RFC1918 CIDR block) intranet portal site.
I am using IPSec over UDP (NAT/PAT).
Looks like the 8525 Internet Sharing/v5.0.00.340 client combination works for me.
Sleuth255
Our company concentrator is the 3000 not the 3020 that you use for the test.
Look like I have to wait to HTC release the update to WM6 and lockely if the will include the DUN package in the update.
I got the VPN connect but can't sent and received any package thru the VPN. I still have internet browsing capability, but I can't ping any computer in my work network.
Thank Sleuth255 for your information.
Gilberto
are you also IPSec over UDP?
hey all, does anyone know if there are any free/opensource vpn client WM5/WM6 software? I've tried Antha and Bluefire VPN. I had great success with Bluefire VPN but a license costs $79. Antha was just a bit too unstable.
Any recommendations?
I'm not aware of any that can do 3DES other than the two you mentioned. Let me know if you find one!
Sleuth255
Yes is IPSec over UDP.
Gilberto
can your shar VPN software?
Sleuth255 said:
The latest Cisco VPN client (v5.0) fixes this.
Click to expand...
Click to collapse
Can you post a link to vpn software? and more information that you have.
I was just wondering if you guys can make a forum section for the HTC Puccini (AT&T Jetstream) tablet?
So perhaps some development / mods can be started on it.
Thanks,
Dan
I second that....thanks!
Thanks, for moving the thread and making a section for the Jetstream
Windows Mobile 6.5 Wi-Fi hotspot problem conecting to an HTC Jet stream
I have been using Artemis 62 ROM for an HTC HD2 T9193 and I have been using the phone as a Wi-Fi hot spot feeding other Windows mobile phones, iPods’, iPads’ and laptops running Windows XP & 7. The Wi-Fi has been working great until this weekend when I purchased a HTC Jet stream tablet. I can’t see the Wi-Fi broadcast from my phone with the Jet stream but I can see it on all my other devices. I have tried the XDA Wi-Fi cab and I get the same results. If I boot my phone into Froyo off the SD card I can Wi-Fi to the Jet stream no problem. I can use all other Wi-Fi hotspots with the Jet stream so it’s something about the Wi-Fi protocol on the HD2 in Windows mobile mode,
Does anyone know how to fix this problem or a different Wi-Fi program that will get past AT&T’s skullduggery?
As a side note on any laptop connected to my phone the connection shows up like a peer to peer connection.
Palmiter said:
I have been using Artemis 62 ROM for an HTC HD2 T9193 and I have been using the phone as a Wi-Fi hot spot feeding other Windows mobile phones, iPods’, iPads’ and laptops running Windows XP & 7. The Wi-Fi has been working great until this weekend when I purchased a HTC Jet stream tablet. I can’t see the Wi-Fi broadcast from my phone with the Jet stream but I can see it on all my other devices. I have tried the XDA Wi-Fi cab and I get the same results. If I boot my phone into Froyo off the SD card I can Wi-Fi to the Jet stream no problem. I can use all other Wi-Fi hotspots with the Jet stream so it’s something about the Wi-Fi protocol on the HD2 in Windows mobile mode,
Does anyone know how to fix this problem or a different Wi-Fi program that will get past AT&T’s skullduggery?
As a side note on any laptop connected to my phone the connection shows up like a peer to peer connection.
Click to expand...
Click to collapse
Sounds to me like the tablet doesn't support an ad-hoc connection, but as I have not tried this myself, I could be wrong. Most newer phones including android send out the wifi hotspot as a regular infrastructure wifi network, not peer-to-peer adhoc. This could be your issue, and might be worth looking further into. Maybe you can change your Windows Mobile to not transmit in adhoc but rather regular infrastructure mode instead. Infrastructure is what any regular home wireless router would transmit.
Thanks for your input. I have tried two Wi-Fi cabs but both have no setting your only choice is to use WEP ad-hoc. I am still looking for a CAB files that will run a Wi-Fi hot spot in Windows mobile 6.5 with more setting choices.
Windows Mobile 6.5 Wi-Fi hotspot problem conecting to an HTC Jet stream
AEDan1977 said:
Sounds to me like the tablet doesn't support an ad-hoc connection, but as I have not tried this myself, I could be wrong. Most newer phones including android send out the wifi hotspot as a regular infrastructure wifi network, not peer-to-peer adhoc. This could be your issue, and might be worth looking further into. Maybe you can change your Windows Mobile to not transmit in adhoc but rather regular infrastructure mode instead. Infrastructure is what any regular home wireless router would transmit.
Click to expand...
Click to collapse
Thanks for your input. I have tried two Wi-Fi cabs but both have no setting your only choice is to use WEP ad-hoc. I am still looking for a CAB files that will run a Wi-Fi hot spot in Windows mobile 6.5 with more setting choices.