hi folks,
I ve did it again, I ve ^$#&^$ up my athena! Shame on me......
I was on SPL 1.2 and wanted to go back to 3.5. So I downloaded the Athenawrapper.exe and he ran ok. After a restart I thought my 1.2 ROM (Michys) would not work anymore but it did. (Didn t think good enough I think because when I had a good upgrade this rom couldn t load anymore). However, I ve downloaded Michys latest ROM (for SPL 3.5) and run the upgrader. On I think 95% or so it went wrong, black screen and a failure of the updater (can t remeber the notification, should have wrote this down, sorry). So now I can only get into the bootloader.
it says:
some strange letters
IPL-V1.00
the same strange letters
SPL-V1.20.Olipro
USB
Click to expand...
Click to collapse
I ve tried the AthenaWrapper.exe, the SPLDowngrader.exe and 5 different 1.2 AND 3.5 roms. The ROMS quit after 1% and the wrapper and downgrader doesn t work.....
Any suggestions?
It my Athena dead?
check there: http://forum.xda-developers.com/showthread.php?t=405814
sanderh said:
hi folks,
I ve did it again, I ve ^$#&^$ up my athena! Shame on me......
I was on SPL 1.2 and wanted to go back to 3.5. So I downloaded the Athenawrapper.exe and he ran ok. After a restart I thought my 1.2 ROM (Michys) would not work anymore but it did. (Didn t think good enough I think because when I had a good upgrade this rom couldn t load anymore). However, I ve downloaded Michys latest ROM (for SPL 3.5) and run the upgrader. On I think 95% or so it went wrong, black screen and a failure of the updater (can t remeber the notification, should have wrote this down, sorry). So now I can only get into the bootloader.
it says:
I ve tried the AthenaWrapper.exe, the SPLDowngrader.exe and 5 different 1.2 AND 3.5 roms. The ROMS quit after 1% and the wrapper and downgrader doesn t work.....
Any suggestions?
It my Athena dead?
Click to expand...
Click to collapse
See Sergiopis advice
The same thing happened to me after I had downgraded to SPL1.2 and tried to use the wrapper again.
I did not follow the AP4 upgrade manual as I had no trouble the first time.
I did make s ure I installed enable rapi when I first did it but on the last occasion I was blase.
When Michyprima brings out his version 4 rom, I will try again to install SPL3.5 but will be interested in your experience after you fix your ID and radio
Try this.
1. Download AP 3, enable.rapi cab, and AP4.
2. Go to bootloader mode. Flash using AP3.0.
3. After flashing, sync your fone to your PC.
4. Copy enable.rapi cab and run it IN your fone (just double tap, it will self-extract).
5. Then flash to AP 4. This worked for me.
Hope everything goes well.
Related
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Please try the search button in this forum!!! And don't worry it's not bricked;-)
sayjeng said:
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Click to expand...
Click to collapse
check your .NET Framework and see if you have the 2.0 version installed. Reboot your pc and start again. We always experience these hiccoughs.
i've tried the search..
seriously saying, its quite hard to find what i want..
i seem to be able to flash the PV_TEMP ROM, it says on my computer its successful but my PDA just goes back to bootloader.
anyway, i'm installing .Net framework 2.0... will see how that goes..
still doesn't work..
RUU says its congratulations...
PDA goes back to bootloader
i cna flash jester's rom, i can flash PV_temps rom..
but all i get is the bootloader screen after that..
can't flash the NVID thats from the upgrade guide... it just says wrong NBF file..
wonder how much will it cost for me to send it to service center to replace the whole flash chip
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
sayjeng said:
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
Click to expand...
Click to collapse
so you know now what is the problem!
recharge it by connecting to a PC with USB and wait wait wait and hope for the best. Try recharging it by what ever means you can do. If you said, you are successful in getting PVtemp, then, try installing battery_status.cab (find it search it by google or whatever) and watch the battery_status line on the front page and wait for a + sign before the 100mA at the right bottom line to appear.
Wait till it is full, then redo step 2 again. I'm sure you can get over without getting the machine to the manufacturer for repair.
no no
the first problem still stands
i'm still stuck at bootloader..
but now i can't flash anything cause my batt is dead..
so i've got 2 problems now
hello all,
sayjeng, I got the same problem last week.
I couldn't use any RUU rom because of the corrupted nbf file.
The PV_TEMP rom worked but I was stuck on boot loader screen too...
I tried many times and with some random hard resets... Eventually, the fourth time , WM5 started...
My advice are :
- charge your battery by any means like SeaPea said
- reboot your desktop computer
- remove your (fully charged) battery from your phone for some seconds and put it back...
Really, I may have been lucky that time...
I just wanted to post here to say that I sympathize...
Good luck!
will give it a try tomorrow..
its past 1am now and i need to be up early tomorrow..
if it doesn't, really have to make a trip to service center..
wonder what should i tell them then..
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
sayjeng said:
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Click to expand...
Click to collapse
me too....any progress?
Jow ... flash your rom from dopod!
If your Radio Rom is crashed ... it stuck at Bootscreen too! After that it must run! it fix partition errors too.
ROm from dopod is 2.15..
my prophet is now on 2.20...
i can't flash it... i haven't been able to find a vendor rom wiht 2.20..
does anyone have any ? Qtek maybe ?
something to get my prophet running...
cause i did try in my attempt to get my prophet back by flashing the Radio ROM.. and it fails.. maybe thats why i can't boot my prophet
tried almost every rom..
used almost every RUU
anyone got any RUU that might help ?
or any suggestions ? thinking of throwing the towel and just pass it to dopod for them to handle....
worst case, change ROM chip
finally
I got this to work using the guide - BUT:
Windows XP SP2 English was the key for me.
I used VMWare to do step 1 of flashing (NVID)
then step 2 of flashing I did on a separate PC.
Worked after so many different attempts
i am running on XP sp2 english.. not using vista..
problem is, i can't even hard reset my phone.. it just says Format is Failed.
but my phone seems fine and still responds to my plugging the USB in and reseting....
Hi sayjeng
The same problem with my imate jamin too..
Whatever you said in you posts is an exact recall of my case.
Now it makes two of us
Waiting to see if someone can come up with a solution.
IPL/SPL at 2.20
Frequent automatic disconnection from activesync.
No means to charge the battery which i think is almost dead.
Tried the Dopod rom,for no avail.
The list goes on and on just like yours.
help..Anyone..?
I tried to upgrade ny Orange SPV M 600
IPL 2.10.0001
SPL 2.10.0001
with wm6_smart1_v1.3 using ROMUpdateUtility_Wizard_NoID.zip and now its not booting up it stuck up with the three color boot loader screen and i tried hard to hard reset but even after keep pressing the camera and communication button together and pressing the soft reset button with stylus for more than one minute it gave no response plz help its my friends phone and I am doomed if I cant make it up working.
If you disable the connect through USB option in ActiveSync, and then put the SPV in bootloader. Then flash it with a AKU2.2 ROM (Any will do including PV temp), then follow this: http://forum.xda-developers.com/showthread.php?t=310452.
How do i put SPV in boot loader????
AKU2.2 ROM where do i find this the link(rapidshare) which is given in thread u told is not working and plz tell me if I will have to download a new rom after that or this wm 6.0 by smart1 will work
Hold the Camera button, and insert the stylus into the larger of two holes on the edge of the SPV with the power connector.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hardreset_bootloader
ya i tried this by reading the thread u mentioned but it puts me back on the same three color screen however I have been able to hard reset and after I press send it said formating FAT something like this
You must enter the bootloader (three colour screen), Then set ActiveSync to not connect through USB (ActiveSync->Settings->connection Settings), Plug the phone into your computer through USB, Then run any of the RUU's from any Part One of here: http://forum.xda-developers.com/showthread.php?t=308755.
Using the AKU2.2 ROM Update Utility, you should get a basic WM5 ROM. You MUST flash an AKU2.2 ROM before you flash a WM6 (AKU3.5) ROM.
Right now i am downloading this original roam from this link
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/OrangeUK/
will this do????
Can I directly install AKU 2.20 after downloading or will I have to do anything more like putting some file in boot loader which u just said???
I dont want WM 6 anymore plz just advice in steps what I should do to get my phone up and running..............
Put the phone in bootloader, change the active sync settings, and then run the upgrade program!
Good Luck!
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
absharaslam said:
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
Click to expand...
Click to collapse
It will do no harm, and there is a high chance it will work.
The RUU is fairly self explanatory-Double click on it and do what it says. The battery charge level is not a problem, so long as there is some charge.
Thanks a lot dude it worked I am relieved now
Thanks again boss
Salute!!!!!!!!!!!!!!!!!!
Glad to hear it
If you now feel experienced enough to upgrade properly, read this thread very carefully http://forum.xda-developers.com/showthread.php?t=310452 (or at least the first post) and then this post: http://forum.xda-developers.com/showthread.php?t=308755
atleast for now i dont have courage.............
This phone belongs to my bro and currently he is out on vacation and when he will come back i thought it will be a surprise that his phone become so good anyways no risk anymore..........
may be next time on my phone only
Well atleast he shouldn't notice the change.
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
absharaslam said:
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
Click to expand...
Click to collapse
No problem. Glad to make a difference
Hi,
I reinstalled French WM6.1 rom 2 days ago. Worked well. Add some apps : VGA HTC Home, etc... Yesterday, tried to start the machine : doesn't start... get off/in battery doesn't solve pb. The screen never lights on.
So, decided to flash ROM using camera+reset. The screen is OK, since I can see ATHE100, IPL-V1.00, ATHE100, SPL-v1.20.Olipro, And Serial then USB when i connect to PC
Started to flash with latest French ROM WM6.1 : the screen light off at 12%, with error 276. I try to recover, nothing happens. The update tool showed no name for a previous ROM.
Continued to flash with MichyPrima WM6.1SPL1.2. It goes until 100%, says 'done', but again I can't start the machine...
Any idea ? Is it possible to downgrade SPL 1.2 to the original one, then flash official ROM... Do you think using SD card flashing method may help ?
Is it possibly a battery problem ? I think mine are full, but I can't verify... Why the ROM id isn't shown even after a succesful flash of Michy's ?
Thanks !
TomNab
I need help my phone won't load up after HTC screen!
what can i do ? : (
Did you flash anything prior to this problem or even install a program or tweak the registry?
i flashed a rom..
i tried hard rest.
nothing works.
but i think i did a mistake ,Full TMOUS Compatible with 576 RAM + 1 GB Storage and i have normal HD Leo..
can that be the reason?
The problem is if you have a TMOUS and flash a non TMOUS compatible ROM or even worse a .51 Radio. There is no problem the other way.
Did you HSLP flash your phone first?
The ROM you are flashing, unless it is a stock one (ie from HTC) does not include a Radio ROM. These custom ROMs will specify what Radio ROMs work with their ROMs. These Radio ROMs have to be flashed first, although if you go into bootloader mode (Hold Volume-down button and switch on), then connect and flash the correct Radio ROM.
yes i have HSLP 2.08 .
and i also installed radio rom 2.12.50 before flashing to the rom.
the rom is VBNROM▐ Aug 16 - RC5.5 Android Compat▐ BLACK/GTX▐ 21915/24623▐ Test 23129/23569▐
and i have a European leo version not the american.
so can that be a problem?
so u say i can do the hold down and power then i can install a new rom?
fred_up
thanks i did the Down Vol And power and flashed to a new rom.
and works ^^ thank u so much
From the VBNROM ROM Thread
v-b-n said:
....
Btw...I do not recommend 2.12.xx radio with my ROMs due to RIL compatibility...they may work fine but are not a perfect match
....
Click to expand...
Click to collapse
oh i see that's y it didn't work probably.
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.
after some truobles updated my leo to original htcrom realease to 3.14 rom
only problem is i have spl3.0.000 on it
now i cant get anything done someone here to help me?
i cant get to change the spl anymore
everytime i get a bad connection with usb
i use win vista
ikkeenjij36 said:
after some truobles updated my leo to original htcrom realease to 3.14 rom
only problem is i have spl3.0.000 on it
now i cant get anything done someone here to help me?
i cant get to change the spl anymore
everytime i get a bad connection with usb
i use win vista
Click to expand...
Click to collapse
On the latest Stock Rom 3.14 you can't change your SPL version neater used HSPL.
But what is your question/problem.
I mean you mention " i cant get anything done" what will you do???
hi thnx for your reaction
i meant that i cant flash a cooked rom or either the original rom from htc everytime i get your uusb connection is not ok?
plse help i am desperate after 2 weeks of trying
ikkeenjij36 said:
hi thnx for your reaction
i meant that i cant flash a cooked rom or either the original rom from htc everytime i get your uusb connection is not ok?
plse help i am desperate after 2 weeks of trying
Click to expand...
Click to collapse
Hmm, strange that part of "USB problem"
But if you will install custom Rom on Stock Rom 3.14 you need to use SSPL_RUU.exe
But this will not solved your problem about USB connection.
have you alway's this problem, ore only when you try to install a Rom that you received ERROR 26 connection problem?
if install stock rom then stil i keep spl 3,0,000
rest it runs fine then
dont know where i can get that spl prog
i will try everything by now
the usb problem only gets with updating a rom
ikkeenjij36 said:
if install stock rom then stil i keep spl 3,0,000
rest it runs fine then
dont know where i can get that spl prog
i will try everything by now
the usb problem only gets with updating a rom
Click to expand...
Click to collapse
If you will return to previous SPL version flash previous stock rom 1.66 ore 1.74 over SD! (check on the HTC webpage by using your S/N with one is your's if you aren't sure.)
i tried it but i keep getting error 260 cant connect chechk usb or cradle?
tried to flash it from sd doesnt work either
tried using sspl_ruu.exe but it starts up and when i get the start screen it says update to version ***** but on the top the currebt version is empty?is this bad?
when i start it anyway it starts in the update screen also in my phone but dont get further than 0% and then says connection error?
please help me
it finally worked with ssplruuu.exe
only som roms dont work can anyone advise on a good rom with dutch language please(maybe some dutch members?)
ikkeenjij36 said:
it finally worked with ssplruuu.exe
only som roms dont work can anyone advise on a good rom with dutch language please(maybe some dutch members?)
Click to expand...
Click to collapse
I'm a dutch member sir, and I use Artemis rom. Very fast/stable and available in dutch.
Ow PS version v.40.0 is build fore Stock Rom 3.14 and works well.
Here is the link to the thread.
tried to flash that one doesnt work goes in to bootloader and then nothing error 260
again problem with connection
only roms working
are 1 from leo energy and one from cruzer 4th rest get the same problem
any chance of solving this?
when i hold vol down during start up i still gett spl 3.03.000000
exept with the 2 roms but every time it starts it goes into bootloader with spl1.42.6666 exept with those 2 roms?
can we pm ass well?
maybe quiker and own language
ikkeenjij36 said:
tried to flash that one doesnt work goes in to bootloader and then nothing error 260
again problem with connection
only roms working
are 1 from leo energy and one from cruzer 4th rest get the same problem
any chance of solving this?
when i hold vol down during start up i still gett spl 3.03.000000
exept with the 2 roms but every time it starts it goes into bootloader with spl1.42.6666 exept with those 2 roms?
can we pm ass well?
maybe quiker and own language
Click to expand...
Click to collapse
I send you just a PM let me know.