Related
I just got my Touch Pro yesterday. When I ordered it I went ahead and added tethering. With my 6800/Titan/Mogul, I was able to tether via bluetooth no problem with a custom ROM that added "internet sharing".
The only way to tether via bluetooth on the Touch Pro stock ROM is via "Modem Link". I got it working fine on Vista. But my work laptop I commute an hour to work each way, is the MacBook Pro.
I absolutely do not want to use a USB cord as there is not much room when you have someone sitting next to you. So I want to be able to connect, and put the phone back in my pocket.
I've searched hi and low for a solution, but can't find anything useful that actually works.
Any suggestions/step by step walk through on a working solution would be much appreciated!!
Thanks!
go->utilities->bluetooth->add new device->phone....should be self explanatory from there.
nikon858 said:
go->utilities->bluetooth->add new device->phone....should be self explanatory from there.
Click to expand...
Click to collapse
No, this does not work. It only holds the connection for 5 to 15 seconds before it fails. It worked great with my Mogul, but I've looked everywhere and can't get it to work with my TP!
yeah same here. i've gotten it to connect a couple times, but then it's only for a for about 5-10 seconds and then disconnects. I just ordered a bluetooth dongle that works with mac osx just to be sure it's not the internal bluetooth on the mac. I could be wrong, but I think the reason it's not stable as my previous phone is because connecting via "internet sharing" created a PAN vs. DUN. On my MacBook Pro it would say "join network on <phone name>" and it would work perfect. Using "modem link" I think is just using the DUN profile. Maybe JETware will expose PAN profile and more profiles? I want to try it, but it looks like it's old software.
well no luck with the bluetooth dongle ordered for the mac as there is no software to install that came with it. plugged it in and the os x bluetooth used the dongle instead of the built in bluetooth hardware. that was the only difference.
But again, I don't think it has anything to do with the Mac. I believe it's just the lack of the PAN profile on the phone. DUN profile works fine on the PC, but sucks on the MAC. At least with Verizon and/or the Touch Pro.
I think I'll remove the tethering package until a custom ROM comes out that enables the PAN profile. Hopefully someone can unlock GPS too. Other than VZW locking down those 2 things, I think the phone is great!
http://www.wmwifirouter.com/
"WMWifiRouter instantly turns your wifi enabled smartphone* into a wireless internet hotspot. Now you can use your laptop and any other device with wifi to get online and surf, email, instant message, and anything else you normally use the internet for"
Internet Sharing App: http://forum.xda-developers.com/showthread.php?t=321393
WOW! Thank you! http://www.wmwifirouter.com Works great. It took a little time to troubleshoot at first. But it's always those quick simple solutions that getcha. I just had to disable the power saving feature. But definitely a cool program worth shelling out $30 for. I had no idea that bluetooth limits bandwidth so much. Through WiFi I'm getting 2,418 kbps down and 516 kbps up. I think with bluetooth I was only able to get like 200-400 kbps down. I also had no idea pocket pc's were capable of acting like a router.
Thanks again. This seems to be the best solution for tethering VZW Touch Pro with a MacBook Pro.
By the way, I also tried the Interent Sharing app. Although it puts the program on your phone, it doesn't enable the PAN profile on the phone. So I'm guessing Verizon's a little smarter than just letting a simple app unlock it. I'm assuming a custom ROM in the future will unlock the PAN profile. Even if it does become unlocked, sharing through WiFi is so much faster that it's not even worth it going through bluetooth.
This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.
hi!
its a problem that suddenly developed. my wifi router (dlink dsl-g604t) is running in 802.11b/g mode and has wpa-tkip for security. i use 3 other laptops, a nokia e65 and my hd2 and i have assigned static IPs to all. i have no sort of filtering enabled. my dhcp pool is limited only to these 5 devices+my router itself (10.1.1.1-10.1.1.6).
my hd2 has always connected fine to my wifi on wpa. since recently, it simply doesnt connect anymore at all when using wpa. i just see the rotating circle next to my network name in the available networks list. in advanced settings i see "associated to network" as the status but it never gets an ip at all. router doesnt list hd2 as a connected dhcp client (and thats correct because i dont see an ip on my phone either). not to mention all other devices are connecting fine.
i have looked around the web and xda and i have tried the following:
what has worked for my h2:
1) open wifi
2) wep on an 'open' key
what has not worked for my hd2:
1) wpa-tkip
open/wep/wpa are the only options i have. no wpa2. my router is old. last firmware release was in 2007 and i dont expect anymore to come.
what i have tried to make wpa work (without any success):
1) changing my psk several times. my laptop connects when i change my psk but phone doesnt. i even changed keyboards on my hd2 to make sure i was typing what i was seeing
2) assigning the same static ip (as set in the router) to my broadcom wifi card and the ne2000 ethernet card on the hd2
3) the reg dword and static ip setting as suggested here http://forum.xda-developers.com/showthread.php?t=627654
4) removing static ip setting for my hd2 MAC and opening up some space in the dhcp pool on the router.
if i misconfigure the security settings on my phone in any way (set to wpa-aes/wep instead of wpa tkip), the phone tries to connect and then stops. then the wifi network is simply listed as available. again this is normal behaviour and confirms that the phone understands the security setup. but when i set it right again (wpa-tkip), it just keeps connecting forever...
(i always soft reset when i make any changes.)
it doesnt seem to me to be a dlink router issue, considering other devices connect fine. also i havent changed any settings on the router in months (until my troubleshooting efforts and now i am back to the same settings).
i am pretty sure something's messed up on the phone, specifically relating to wpa security. thats because i can communicate with my router (i get "associated to network"/rotating circle as status) but i cant get an ip. what separates the two things is successful authentication.
it cant be a radio issue unless radios start malfunctioning randomly... as for what i have changed on my phone - i have installed sktools. the reason i mention sktools is because i found an entry reading "802.11g support" under "tune up->network" and it was DISABLED. so i simply enabled it. i have tried disabling and enabling again but that doesnt help. i also ran the registry cleanup if that makes any difference.
anyone else had this problem? or anyone who can suggest what i should try? please dont tell me to downgrade to wep/open.
many thanks!
phone details:
tmous hd2; 2.31.531.1 rom; 2.15.50.02_2 radio; hspl3
I have no suggestions , other than to tell you I use my phone with WPA daily on a Linksys 610n, works well ...
I wish I had more input for you ...
well im definitely sure that my dlink/hd2/wpa combo works too... it just doesnt work now... i have changed many roms and many radios. phone always connected...
if there is no decent way of going about this then what manhandling might work? reflash? hard reset? i really dont want to do those things because i am into heavy modding and equally bad at backing up... eg) several registry hacks will all go poof...
silenced3 said:
well im definitely sure that my dlink/hd2/wpa combo works too... it just doesnt work now... i have changed many roms and many radios. phone always connected...
if there is no decent way of going about this then what manhandling might work? reflash? hard reset? i really dont want to do those things because i am into heavy modding and equally bad at backing up... eg) several registry hacks will all go poof...
Click to expand...
Click to collapse
Just remembered the time I did have trouble getting it to connect, it was after I had enabled the "N" hack with BSB Tweak, could not get it to connect, again .. (this was not with the linksys, but with my older netgear on the other side of my network)
After a Hard Reset it did connect, but , not sure the "N" is worth the trouble ....
watcher64 said:
Just remembered the time I did have trouble getting it to connect, it was after I had enabled the "N" hack with BSB Tweak, could not get it to connect, again .. (this was not with the linksys, but with my older netgear on the other side of my network)
After a Hard Reset it did connect, but , not sure the "N" is worth the trouble ....
Click to expand...
Click to collapse
i disabled the N hack by changing the registry key directly... soft reset and still nothing... so i put it back on... forgot to mention that in my original post...
edit:
reflashed radio... still no luck.
silenced3 said:
i disabled the N hack by changing the registry key directly... soft reset and still nothing... so i put it back on... forgot to mention that in my original post...
Click to expand...
Click to collapse
K .. and I was not clearer in my post, .... Once I had enabled it, disabling it did not seem to make a difference, I could not connect to that older AP, until I hard reset/re-flashed ... it happened twice, so I have just quit using the "N" hack altogether ...
watcher64 said:
K .. and I was not clearer in my post, .... Once I had enabled it, disabling it did not seem to make a difference, I could not connect to that older AP, until I hard reset/re-flashed ... it happened twice, so I have just quit using the "N" hack altogether ...
Click to expand...
Click to collapse
did you start having the problems right after setting the n hack? because i have had my n hack on since a long time and it worked fine all this while...
silenced3 said:
did you start having the problems right after setting the n hack? because i have had my n hack on since a long time and it worked fine all this while...
Click to expand...
Click to collapse
I would not say right after, but fairly soon, was I think the next day I noticed, it , we are probably barking up the wrong tree, but It's all I got ....
solved!
woohoo! i fixed my problem.
it turns out that i was suffering from over-modding my phone i must thank this post#8 in the htc wizard subforum for reminding me that i did the same thing before my wpa problem started! thanks ristiisa for updating a 2 year old thread (in 2009)! so i went back to advanced config and under network -> i DISABLED wpa authentication (earlier i had set it to ENABLED)... and pronto, my weather tab has finally updated
imagine finding a solution in the htc wizard thread of all places... i am not sure what exactly i did wrong when i enabled wpa authentication though... but now its fixed! and all because i soooooooooo badly didnt want to do a hard reset/reflash
i thought i should come back here and post the solution for others... during my several days of solution hunting i also found out that googling for "hd2 wpa issue" or something similar brings my own thread as the top result
lesson for all those folk who curse their devices when they break down... maybe it is YOUR fault after all
SOLVED!
silenced3 said:
lesson for all those folk who curse their devices when they break down... maybe it is YOUR fault after all
Click to expand...
Click to collapse
yep just like the doctor says ..."If it hurts when you do something, don't do that thing!!"
EDIT:
Glad that fixed it for you ....
But just for reference WPA does work, just not for everyone it seems ....
I bought my first smartphone ever last month to give you an idea how new I am. My last phone was a Touch that I had set up to allow tethering... but I had to upgrade my phone. I need my tethering back, and I prefer not going through a program like pda-net.
So, I read that if I root the phone, I'd have tethering back. I used Revolutionary. I backed up my phone. I installed clockwork and superuser. I think I did everything I'm supposed to do. However, when I plug the phone in (I prefer USB tethering) and click the "Internet Connection Mode", I still get the message I need to subscribe for $20 a month, and I don't get a connection. Do I need to do something else to enable wired tethering? Do I have to install a 3rd party program as well? Or is it that I haven't installed a custom ROM/Kernel/Radio/Whatever would be the right thing?
The phone is a Thunderbolt. HTC Sense 2.1, Software #2.11.605.5, Android version 2.3.4.
I really don't have much of an idea what I'm talking about, so if anyone has any fairly easy answers, it would be greatly appreciated. Thanks for any help.
Find my WiFi tether thread and follow instructions
Sent from my ADR6400L using XDA App
Do what lantern says. Just rooting does not unlock the built in internet sharing apps. You need to get the apps that do what you want now. I.e. wireless tether, you might like wired but wireless is very nice.
Sent from the nearest cellular tower.
Grnlantern79,
Well, I've tried following your instructions on the other thread. I downloaded the .apk you had listed.
That took me an hour to figure out how to install... didn't know I needed to install another program to install something from a memory card.
As for these instructions:
"Mine did not work until I changed the device profile to Thunderbolt in settings.
Then I changed a few other settings such as
Force WiFi driver reloading (check) *has worked for some*
Routing fix (check) *most important one*
Disable wake-lock (unchecked) -> *this is why you lose connection after your screen turns off*"
I can't for the life of me find where any of these are. I've spent a good amount of time trying to find them, and just can't seem to find a settings section.
Then I tried Autotethering and WiFi Tether from the Market. It doesn't matter which I use, when I hit "Internet Connection Mode" the Verizon $20 to use message pops up. I tried on two computers, and both will see something there, but not connect to the internet. I tried connecting without selecting that, but it still didn't work (had it on "charge only").
I'm very frustrated... I've spent hours working on this and don't feel like I'm making any progress. I appreciate you attempting to help via that other thread, but I'm lost. If you have any way of giving me a more detailed explanation of how to get this to work, I would greatly appreciate it.
If I just install some new ROM and not work off the rooted stock one I have, would they come with the tethering block from Verizon disabled?
Thanks for any advice.
Telaeus
When you open WiFi tether press menu the soft key at bottom of your phone, the settings will pop up.
Device profile = thunderbolt
Routing fix = check box
Enable access control
Now I can tell you are not tech savy so this is where my help stops. If you can't find the settings in a program after an hour, you should think about return your smart phone for a feature phone.
Sent from my ADR6400L using XDA App
Well, thanks for trying to help then Grnlantern79. I had misunderstood where to look for the settings. Figured it was settings on the phone itself I was changing to bypass the Verizon Internet Connection thing.
I changed all the settings in WiFi tether. Still no luck. The computer recognizes the network... I set it to Public. It's listed as HTC Remote NDIS Based Device. However, there is no Internet or Network access. I'm not putting it to "internet connection mode" since the Verizon popup has never gone away... leaving it on Charge only.
If anyone else is willing to try and assist me, I would appreciate it. I fully admit to not being smartphone savvy. However, I'm not incapable as Lantern implies... I've built my own computers since 1993, and can diagnose and do pretty much anything hardware related. Unfortunately, smartphones are different, and I'm still getting up to speed on all the terminology and uses of them.
So, thanks Lantern... but is anyone else able to figure out why this isn't working?
Thanks for any help.
Enable access control
Check
WiFi driver reload
Routing fix
Uncheck
Disable wake lock
Setup-method
Apple computer
Wext
Any other
softtap
Set computer profile to home network.
When u connect to ur phone it wireless not usb, ur phone will have a notification asking if its ok to connect, hit enable. Done.
Sent from my ADR6400L using XDA App