Related
Has anyone been able to successfully connect DUN over BT using wmodem? I have installed the addon cab and can find the DUN connection when pairing my phone with my laptop, but when I go to connect it gives me a 678 error. I have no problems connecting wmodem over USB or using "Internet Sharing" to connect cover BT and USB.
dun
Had issue with wmodem but Internet Sharing that was on my custom rom works like a champ. I'm pulling 1.0 to 1.2 Mbps almost all the time. I can't remember if it was on my stock rom, but if not, I'm sure it's available somewhere on here.
Nate
i was just about to do a search on this. then i scrolled down the list and found this post. I'm very interested in getting BT DUN working on my Mac, since you can't use USB.
If you find an internet sharing cab, can you post here?
Thanks.
yeah i do not mean to hijack your thread but when i try to tether via bluetooth to my new macbook with internet sharing, the internet connection crawls!! i mean CRAWLS!!! lol
I have BT and USB connection with a windows laptop and it runs perfect. any ideas on how to speed up the connection?
Thanks!
http://www.wmwifirouter.com
this is really the best solution if you want to connect to a Mac. Works perfect and is worth the money! Hella fast too when connecting through WiFi. But you have the option to connect through WiFi, Bluetooth & USB.
When I connect through WiFi, I'm getting 1.2mb down and 500kb up.
It worked great for a while about a month or 2 ago when I bought it. But then I was playing with the Mac network settings and stuff and managed to jack it up. But here's what I was doing wrong:
Connecting through WiFi, there is open & wep. I chose wep. So on WiFiRouter you select your wep password. I chose a simple word, let's say "keyboard". On the Mac when you select to connect wep, using keyboard for the password won't work. You need to enter the 20 digit hex value that WiFiRouter gives you after you put in the password "keyboard".
Hope this helps anyone who might have problems setting it up. I didn't change any settings on WiFiRouter. Works right out of the box. You just have to make sure you set it up correctly on the Mac.
I use ICS over Bluetooth all the time. works great.
I now have ICS. Unlocked my HTC Touch Pro and used Scott Scrosler's ROM. But I'll most likely use WiFiRouter since it's about 3-4X faster going through WiFi. Need the speed for VPN.
I have an HTC Touch Pro and an asus eee pc and have tried and searched everywhere to figure out how to bluetooth pair these two, but I've had no luck. I can USB pair just fine with Internet Sharing. Has anyone had success with this? I'd rather go the free route than spend the $ for wmwifirouter, if possible. TIA
Well on W7 at least all I have to do is select Bluetooth as my connection option in ICS and then right click on my phone in the Bluetooth Devices window on my PC and go to where it says "Join PAN" and it connects faster than it would by USB. The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting. But GRemote works from like 25 feet away.
Internet Sharing NO Registry Edit Needed
Hi. For those with ATT FUZE Stock Rom
I got this CAB (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire, just install the CAB and it will enable Internet Sharing, and NO registry edit needed.
As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.
Enjoy.
hidavi said:
The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting.
Click to expand...
Click to collapse
I'm facing a lot of disconnects using Bluetooth PAN, however over USB works great! If I have to use the cell phone near the computer, I'd rather use the cable.
I only wanted to use bluetooth because I could put the cell phone near the window which is where I have better signal when I'm on the mountains with GPRS-only..
This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
Anyone successfully tethered an Archos 5 Internet Tablet with Android to Verizon Touch Pro, so as to get that lovely EVDO Rev A displayed on that nice 4.8 inch screen?
I have an old SSK ROM (probably a good year old). I've tried WMWiFiRouter (Bluetooth and WiFi) and ICS (BT) to no avail. All of these work from my Win7 laptop. Bluetooth option requires just pairing; no config at all.
Apparently one issue is that Android (at least the 1.6 Donut on the Archos) can't connect to WiFi in Ad Hoc mode.
Don't know for sure what the BT issue is. Two things do jump out:
1. phone doesn't show NAP or PAN in the supported profiles in BT settings
2. laptop sees DUN as a profile. Archos doesn't show any listed after pairing
Any idea if one of the nice ROMs out there will help?
Thanks!
Kevin
This would make my year if I can get this working..
Archos 5 (fw:1.7.33)
Verizon Touch Pro 2(wm6.5)
When I try to turn the tether on (on the archos), "Dial-up Networking" in the bluetooth settings of the TP2 appears for the duration of it trying to connect. If the DATA Connection is connected, it will disconnect when you attempt to tether and not even try to reconnect.
So.. The phone sees a dial up connection from the bluetooth but theres a missing link between there and it actually dialing out. I tried wmwifirouter.exe but I cant get the bluetooth to work in that.
Weird thing: While tethering was tring to astablish a connection, I opened IE on the TP2 (to manually connect data) and got the Verizon tethering page (yes, on my phone) asking me sign up.. huh?
I heard from my coworkers that it is possible enable Ad-hoc in Android.. anyone try it with the archos?
jdamore said:
This would make my year if I can get this working..
Archos 5 (fw:1.7.33)
Verizon Touch Pro 2(wm6.5)
When I try to turn the tether on (on the archos), "Dial-up Networking" in the bluetooth settings of the TP2 appears for the duration of it trying to connect. If the DATA Connection is connected, it will disconnect when you attempt to tether and not even try to reconnect.
So.. The phone sees a dial up connection from the bluetooth but theres a missing link between there and it actually dialing out. I tried wmwifirouter.exe but I cant get the bluetooth to work in that.
Weird thing: While tethering was tring to astablish a connection, I opened IE on the TP2 (to manually connect data) and got the Verizon tethering page (yes, on my phone) asking me sign up.. huh?
I heard from my coworkers that it is possible enable Ad-hoc in Android.. anyone try it with the archos?
Click to expand...
Click to collapse
Actually, with the latest Archos firmware (1.7.71? last week), it works great for me. After updating, I unpaired and repaired the devices. I use Internet Connection Sharing with BT, and use Archos Tether, and it works quite nicely. The power control widget is helpful here too; sometimes I need to power-cycle the Archos BT, then turn on tether, to get it to work.
kevinsneel said:
I use Internet Connection Sharing with BT, and use Archos Tether, and it works quite nicely.
Click to expand...
Click to collapse
Internet Connection Sharing is a program/setting? Or are you just saying you share internet through bluetooth.. Sorry just being thorough.
haha I'm not surprised there has been an update since 1.7.33. Hopefully that will fix my random reboots.. Ill report later tonight if the update to 1.7.71 helps. Thanks!
jdamore said:
Internet Connection Sharing is a program/setting? Or are you just saying you share internet through bluetooth.. Sorry just being thorough.
haha I'm not surprised there has been an update since 1.7.33. Hopefully that will fix my random reboots.. Ill report later tonight if the update to 1.7.71 helps. Thanks!
Click to expand...
Click to collapse
Internet Connection Sharing is a standard Microsoft WinMo program, but it is often dropped from carrier phones. It's pretty easy to find online.
WMWiFiRouter likely also should work in BT mode with 1.7.71, but I haven't tried it.
Kevin.. I'm being an idiot. You have the touch pro and I have the touch pro 2.
Bluetooth on wmwifirouter and on ICS (maybe i have the wrong ICS) seem to be not supported on the TP2. The only options is wifi/usb with wifirouter and usb with ICS
I'm assuming I need a program like those two that will work with bluetooth? I get the message on the TP2 "this device is attempting to connect to the internet" and I accept but still nothing... is this where wifirouter and ics come into play?
BT for ICS and WMWiFiRouter on TP2 vs TP
Odd that ICS and WMWiFiRouter should have less functionality on TP2 WinMo 6.5 than on TP WinMo 6.1...
Maybe you'll want to ping Morose Media (WMWiFiRouter folks) to see if they have any thoughts, as well as ask general ICS question on this site.
What version of WMWiFiRouter (I have 1.25, build 600) do you have?
And where di you get your ICS?
kevinsneel said:
Odd that ICS and WMWiFiRouter should have less functionality on TP2 WinMo 6.5 than on TP WinMo 6.1...
Maybe you'll want to ping Morose Media (WMWiFiRouter folks) to see if they have any thoughts, as well as ask general ICS question on this site.
What version of WMWiFiRouter (I have 1.25, build 600) do you have?
And where di you get your ICS?
Click to expand...
Click to collapse
Oh, I see the following on WMWiFiRouter page. Too bad. Another reason to hold off getting TP2 .
# HTC Touch Pro 2
* AT&T Tilt 2
* HTC Rhodium
* Sprint Touch Pro 2
* Support from version 1.50. Sharing using Bluetooth not currently supported.
Odd that ICS and WMWiFiRouter should have less functionality on TP2 WinMo 6.5 than on TP WinMo 6.1...
Click to expand...
Click to collapse
I tried it with both WM6.1 and WM6.5 and its the same thing.
What version of WMWiFiRouter (I have 1.25, build 600) do you have?
Click to expand...
Click to collapse
Running 1.6
There must be something unique about the BT on the TP2. Is there a reg hack that Morose Media hasn't even found yet? I'll write to support and see if they have any comments.
And where di you get your ICS?
Click to expand...
Click to collapse
sorry i'm a noob.. I cant post links yet but its from ppcgeeks[dot]com
I hope there will be an update for wmwifi.
Might be easier to hack ad-hoc onto the Archos.. know anything about that lol?
jdamore said:
I hope there will be an update for wmwifi.
Might be easier to hack ad-hoc onto the Archos.. know anything about that lol?
Click to expand...
Click to collapse
You may want to check out the following thread. I think some of the Android users (e.g. G1) folks may have made some progress, but I don't know if that was on client or server side.
I wrote to morose about the TP2.. heres what they said:
We are looking into supporting the new non-Microsoft Bluetooth stack that comes with the new HTC devices, however unfortunately I cannot give you a date when we might have a beta of this available. All I can say is that the development team is working on it.
Click to expand...
Click to collapse
As soon as they have it working ill purchase that minute. In the mean time, I'm going to see if I cant get ad-hoc on the archos..
thanks for the help kevin
jdamore said:
I wrote to morose about the TP2.. heres what they said:
As soon as they have it working ill purchase that minute. In the mean time, I'm going to see if I cant get ad-hoc on the archos..
thanks for the help kevin
Click to expand...
Click to collapse
My pleasure... Good luck!
By the way, I asked them about supporting multiple devices over bluetooth, and the next day they gave me a prototype that does it, and they say they will put that into the main product. Now that's service! I love it -- much lower power usage and heat than WiFi, and plenty fast enough for my uses. Should run much longer that way. I'm psyched!
I am in the same boat with an archos 5 android tablet, the HTC touch PRO and sprint as a carrier. let me know if you come up with a work around. I'll do the same.
OKay . maybe i miss read all the posts. Its the HD PRO 2 thats having trouble connecting. I just updated to the 1.7.77 which allowed me to change to PAN and i made sure that PAN was selected in WMWIFIROUTER. All of the other things i left blank, and it connected right up showing a tiny cell phone icon next to my bluetooth icon. It was a very happy moment. I love finding those hidden icons.
Archos 5 Programming problem with PAN/DUN
The problem, and no one take this wrong, is that the technicians at Archos are a bunch of backwards idiots. I emailed them, explained to them that, if they would just rewrite the PAN/DUN menu to be selected previous to pairing, the problem would be solved.
My Sprint Touch Pro will do PAN bluetooth (all day long) even upside down but the idiotic software on the Archos 5 isn't smart enough to detect it so you don't get to use the PAN (which they claim is there), all you see is DUN.
I've used PDANet and gotten results but the connection is SO unstable it's just too irritating to bother.
If more people would write Archos, tell them to change the architecture of the tethering, this tablet would be more along the awesome line.
HOWEVER, because of this little quirk, some electronics magazines wrote the Archos 5 as "One of the tablets that should have NEVER been created" and it's gotten a bad rap because of the engineers.
Heck, even the whole GPS issue, they used an independent software from another company to make it work and while it DOES work, it's often slow to lock-in while standing still sometimes.
Basically i saw write in and tell them to change it. PAN is so much easier to deal with. I've had better luck with the G1 and the HERO but the problem is my current phone is using Windows Mobile 6 and they actually removed the DUN some versions ago for some reason i can't explain and the Microsoft tech couldn't tell me either.
You can hack the DUN in with registry tweaks and support software but there's no guarantee it will work.
#777 to start DUN connection?
I know I am late to this party, but on my 3rd AIT 5 (clearance at Best Buy for 150, but I got open box unit for 125) attempting this with XV6800, and now a new Imagio that tethers (Verizon) just fine with Linux/WinXP/Nokia N810.
The thing I have found with DUN is that it requires the tethered device (PC/AIT/etc) to send the #777 to connect, then authenticate with <phone number>@vzw3g.com for Id, and password of vzw. The tethering setup on the AIT appears to let you do the Id/Password part, but I see no way to get the #777 sent in the first place. Has anyone figured out that part?
TIA
RO
Hi all,
I got problem with internet connection on my HD2 (ROM 1.48). There are 2 ways I connect to the internet - WIFI and GPRS. GPRS connection works fine - I can download and read e-mails, make backups with MyPhone, update weather information, etc. But when I connect to the internet with WIFI, there are only 2 things I can do. I can browse web pages with Opera and update Twitter messages. But I can´t download e-mails, make backups, update weather information, etc. When I try to update or backup something, there is connection error (through that connection between phone and router is fine and web pages are running).
It seems to me like most of applications want to connect to internet via GPRS only. Is there any way to set up (or check) the phone to connect to the internet via WIFI when it is turned on?
Thanks for any advice
Sorry cant help but agree - it would be fantastic if there was some way of knowing / controlling when it used GPRS data and when it uses wifi. When wifi availabe obviously would rather use that than be charge a small firtune for data.
Any one out there about to help with this??
Internet browsing
Ditto. I can - after HUGE effort - connect WiFi but I cannot browse the internet using either Opera or IE. 2 year old Nokia connected and browsed literally within 2 secs! Also, the phone keeps connecting via GPRS all the time even with data connections off. Can anyone help? Thanks PS I know it's unproductive & forgive me, but I have to get this off my chest: this is the worst cellphone I've ever owned. Bluetooth doesn't work, internet doesn't work, handsfree car kit doesn't work. Does anything work?
kakphone said:
Ditto. I can - after HUGE effort - connect WiFi but I cannot browse the internet using either Opera or IE. 2 year old Nokia connected and browsed literally within 2 secs! Also, the phone keeps connecting via GPRS all the time even with data connections off. Can anyone help? Thanks PS I know it's unproductive & forgive me, but I have to get this off my chest: this is the worst cellphone I've ever owned. Bluetooth doesn't work, internet doesn't work, handsfree car kit doesn't work. Does anything work?
Click to expand...
Click to collapse
correction, YOUR Bluetooth doesn't work, YOUR internet doesn't work, YOUR handsfree car kit doesn't work.
Get it exchanged. (if they genuinely dont work)
@others, go to settings menu all settings connection connections advanced select networks.
there are two dropdowns, in teh top one should be the name of your mobile data, , this is what automatic progs will use to connect to the web, in teh bottom one it should be 'the internet' (or sometimes 'my work network'), meaning they use wifi if available, and data if not.
(At least thats how they should work....)
If you set the top one the same as teh bottom one, nothing should try to use mobile unless wifi is not connected.
Could be a proxy problem? some operators set up a proxy, which can screw with connections.
samsamuel: Thank you for your advice. I´ve tried it - in both dropdowns I got "my work network", but no success.
I´ve found something interessting. When I turn on YouTube client (using WIFI), I can´t play videos. That should be ok when I got problem with internet connection. But YouTube client shows on the welcome screen preview of today´s added videos. So the question is why should application download preview of video, but it can´t play the video? I´m a little bit confused
Thanks for the suggestion, but I had tried that already and it did not work. I don't think it is just my cellphone. There are many comments re the HD2 that make it clear that it does not work with a Parrot handsfree carkit, Motorola S9 headset etc, and the 2 earlier posts reveal problems using WiFi too. It seems to be problematic on many fronts. I cannot even connect it using Windows Mobile via an USB port! And while I appreciate all suggestions it seems to me that this model is a (very expensive) lemon and frustrates huge numbers of owners. I find it odd that a 2 year old Nokia N95 can connect and browse instantly and a 'smart phone' doesn't work at all. I find it to be very gimmicky. I don't need twitter, facebook etc. I need voice dial, good PC software (like Ovi and PC suite) and bluetooth that works etc. The HD2 has none of this, but great graphics of a windscreen wiper, exactly the sort of pointless gimmick that reveals that the designers were interested in making a toy and not a useful phone.
I suggest you try and install "HTC_Wi-Fi_onDemand_by_Krocher". This program will always use wifi when available and stop the GPRS from connecting and will also keep your wifi on a stand-by. Please do read through the thread as you have to make sure that no programs using wifi are activated when you want it to be off. For me it solved several problems with wifi.
Second thought is to upgrade to one of the much more stable and already tweaked OS's. There are quite a lot out and you'll find everything about that on this forum as well.
Last thought, if it does not work it must be something to do with either the settings or the OS version as for others it works absolutely fine. These are complicated phones that, much like computers, must be set and tweaked to the correct settings in order to get the best out of them. If you just want a "buy and run" phone this is not the one.
Success,
Itamar
Hi,
Does anyone know if the SGS2 lets you set up a wifi hotspot, like you can on stock android? I know this is probably disabled on on-contract phones, but I'm planning to buy one SIM-free.
Cheers
It does. Was using it sat out in the sun on College Green today
I was using it in the early hours of this morning, it's great
I was surprised that it allowed me to hotspot. I rooted the thing in anticipation of that feature not working. I don't know much about rooting so I fumbled through it. I think the developers need to do a special modification to enable that service if it's disabled. Anyway, it looks enabled out of the box. But I thought the providers were the ones that disable it
Does anyone know how the providers usually handle the allowing of hotspot? Do they disable it down the road sometimes? Or if it works now it will work long term.
Looks like the word is not to use any addon wifi tether for the SII and to just to use the stock hotspot function that comes with the phone.
I tried it and it worked with my laptop. However, while my laptop is connected, if I try to connect to the hotspot with a Blackberry or Nokia phone the laptop loses its connection. After that the laptop can't connect.
Is anyone else having this problem?