Has anyone been able to successfully connect DUN over BT using wmodem? I have installed the addon cab and can find the DUN connection when pairing my phone with my laptop, but when I go to connect it gives me a 678 error. I have no problems connecting wmodem over USB or using "Internet Sharing" to connect cover BT and USB.
dun
Had issue with wmodem but Internet Sharing that was on my custom rom works like a champ. I'm pulling 1.0 to 1.2 Mbps almost all the time. I can't remember if it was on my stock rom, but if not, I'm sure it's available somewhere on here.
Nate
i was just about to do a search on this. then i scrolled down the list and found this post. I'm very interested in getting BT DUN working on my Mac, since you can't use USB.
If you find an internet sharing cab, can you post here?
Thanks.
yeah i do not mean to hijack your thread but when i try to tether via bluetooth to my new macbook with internet sharing, the internet connection crawls!! i mean CRAWLS!!! lol
I have BT and USB connection with a windows laptop and it runs perfect. any ideas on how to speed up the connection?
Thanks!
http://www.wmwifirouter.com
this is really the best solution if you want to connect to a Mac. Works perfect and is worth the money! Hella fast too when connecting through WiFi. But you have the option to connect through WiFi, Bluetooth & USB.
When I connect through WiFi, I'm getting 1.2mb down and 500kb up.
It worked great for a while about a month or 2 ago when I bought it. But then I was playing with the Mac network settings and stuff and managed to jack it up. But here's what I was doing wrong:
Connecting through WiFi, there is open & wep. I chose wep. So on WiFiRouter you select your wep password. I chose a simple word, let's say "keyboard". On the Mac when you select to connect wep, using keyboard for the password won't work. You need to enter the 20 digit hex value that WiFiRouter gives you after you put in the password "keyboard".
Hope this helps anyone who might have problems setting it up. I didn't change any settings on WiFiRouter. Works right out of the box. You just have to make sure you set it up correctly on the Mac.
I use ICS over Bluetooth all the time. works great.
I now have ICS. Unlocked my HTC Touch Pro and used Scott Scrosler's ROM. But I'll most likely use WiFiRouter since it's about 3-4X faster going through WiFi. Need the speed for VPN.
I have an HTC Touch Pro and an asus eee pc and have tried and searched everywhere to figure out how to bluetooth pair these two, but I've had no luck. I can USB pair just fine with Internet Sharing. Has anyone had success with this? I'd rather go the free route than spend the $ for wmwifirouter, if possible. TIA
Well on W7 at least all I have to do is select Bluetooth as my connection option in ICS and then right click on my phone in the Bluetooth Devices window on my PC and go to where it says "Join PAN" and it connects faster than it would by USB. The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting. But GRemote works from like 25 feet away.
Internet Sharing NO Registry Edit Needed
Hi. For those with ATT FUZE Stock Rom
I got this CAB (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire, just install the CAB and it will enable Internet Sharing, and NO registry edit needed.
As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.
Enjoy.
hidavi said:
The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting.
Click to expand...
Click to collapse
I'm facing a lot of disconnects using Bluetooth PAN, however over USB works great! If I have to use the cell phone near the computer, I'd rather use the cable.
I only wanted to use bluetooth because I could put the cell phone near the window which is where I have better signal when I'm on the mountains with GPRS-only..
Related
I updated my 8525 with the official AT&T AKU 3.5.2. When I enable Internet Sharing and connect the phone via USB to my Mac, it kills Bluetooth and nothing happens.
With AKU 3.3, this was not an issue. I tried it on a Macbook Pro and a Macbook with the same result. No problem using Bluetooth PAN, but slow.
Just for the fun of it, I tried Internet Sharing with Windows XP running in Parallels, and it works fine via USB cable.
Anyone having the same issue? Any registry hacks or drivers to solve the problem?
Thanks in advance.
Ted
There must be a Mac user here who upgraded t AKU 3.5.
What do you mean by "it kills Bluetooth and nothing happens"?
Does it kill your bluetooth on your mac or on your 8525?
Are you trying to both do internet sharing via USB and connect to your Mac via Bluetooth from your 8525 at the same time?
verendus said:
I updated my 8525 with the official AT&T AKU 3.5.2. When I enable Internet Sharing and connect the phone via USB to my Mac, it kills Bluetooth and nothing happens.
With AKU 3.3, this was not an issue. I tried it on a Macbook Pro and a Macbook with the same result. No problem using Bluetooth PAN, but slow.
Just for the fun of it, I tried Internet Sharing with Windows XP running in Parallels, and it works fine via USB cable.
Anyone having the same issue? Any registry hacks or drivers to solve the problem?
Thanks in advance.
Ted
Click to expand...
Click to collapse
After I enable ICS on my 8525, and connect the USB cable to MAC, somehow, the bluetooth on my MAC gets disabled [Bluetooth Not Avaible message with the icon grey out], and my 8525 still says "check USB cable". But, there's no connection. I made sure that BT is disabled on my phone, and PC to USB is unchecked.
Just as a test, I connected my 8525 to another MAC that doesn't even have Missing Sync and the same thing happened. With ICS on, USB connection basically disables Bluetooth. For the life of me, I cannot figure out why that happens. USB shouldn't interfere with Bluetooth.
In the meantime, it works fine with PC.
Hope someone can shed some insight.
Ted
Any MAC user here willing to help a poor sould?
verendus said:
Any MAC user here willing to help a poor sould?
Click to expand...
Click to collapse
I see the same thing on AKU 3.5 and Tiger 10.4.9 when I just tried it. Once 10.4.9 came out and supported PAN, I stopped using the USB connection. I still get 400kbps or so with Bluetooth, so there's I don't really have a reason to use USB (plus the Hermes drains a MacBook Pro's battery rather fast - I can drain a notebook battery in an hour with the phone plugged in vs. 3 hours without).
Jmat, thanks for the reply. It's good to know that it's not just my phone. I hope this can be fixed though. I do use BT PAN with OS X 10.4.9, but it would be nice to have the USB option since it's about 2x faster.
I cannot understand why USB connection would wipe out Bluetooth on my MAC though.
I know someone here will figure it out.
eh, 10.4.9 supports pan? news to me. i use my pc more than my mac, so i think i only have 10.4.8. i have the latest aku (as far as i know) from the newest cingular rom. i'll give it a shot.
Internet Sharing + OS X
I was able to tether 8525 to powerbook G4 thru bluetooth for internet connection. Then clicking the dropdown for the phone icon and clicking bluetooth. It would dial then authenticate, and I would be connected to the internet. In doing that, I needed to download Tytn modem script for mac modem, it worked great! However, I recently upgraded the ROM (2.06)on the 8525, and now Internet Sharing is the protocol for for Wireless Modem. This method directs the device to connect thru bluetooth by joining the network associated with the Pocket PC, once connected in the bluetooth icon dropdown, I try to access webpages and I get "Not Connected to the Internet."
I've heard of AKU, can someone please refresh my memory, and will it be necessary to update to correct my issue?
Can someone please assist me with using the 8525 to tether with a Powerbook G4 to connect to the internet?
**NOTE** Also, MissingSync for 8525 does not work since the ROM update. I was never successful connecting to it thru BT, but it worked great thru USB. Now I try to connect thru USB , the connection is lost when attempting to start MissingSync app. Any Ideas??
Thank you
-Cletus
Internet Sharing + OSX
I've been using my Hermes to connect to the internet from my powerbook for a few month (BT connection). It was working OK although conflicting with direct push.
Since I upgraded to AKU 3.3 and use internet sharing, it is now much more reliable, connects fast and transparently.
I recently got MissingSync to work, by enabling advanced USB settings thru the phone.
My other issue that is still unresolved is that when I connect the BT PAN from the phone, and join network from the BT setting from the MAC, I connect successfully, but I still can not access internet on MAC. It appears that there are internal settings that need to be altered to access web pages once connected thru BT PAN/Internet share? Any Ideas, please help! Thank you.
obertaud said:
I've been using my Hermes to connect to the internet from my powerbook for a few month (BT connection). It was working OK although conflicting with direct push.
Since I upgraded to AKU 3.3 and use internet sharing, it is now much more reliable, connects fast and transparently.
Click to expand...
Click to collapse
Can you tell me how you set up the connection? I've paired my Hermes and Powerbook, turned internet sharing on, I can join the PAN network but the Powerbook refuses to connect to the internet.
PB PAN
Have you set your network conf to Automatic?
First of all, this is what I have:
Phone: XV6800
i have an "unlimited pda" plan through Verizon
ROM: DCD 3.1.6
RADIO: 3.42.30
I want to usb tether my phone to my laptop to use it as a modem. I do not want to incur any extra charges. (verizon warned me of a 20 dollar fee if i tether with out that option added to my plan).
There must be a way to do this, without getting charged.
Any help would appreciated.
Use the internet connection sharing in the Comm Manager, using either Bluetooth or USB. Works like a charm.
I like using WMWifiRouter, but that isn't USB, it's through the wifi
fishfuzz said:
Use the internet connection sharing in the Comm Manager, using either Bluetooth or USB. Works like a charm.
Click to expand...
Click to collapse
This works perfectly, you can even use it through bluetooth. I don't incur any extra charges. I know it works for sure with DCD's roms, because I am not getting charged. There is some reg key that gets changed so VZW does not know you are tethering.
Are there any USB drivers needed to get Internet Connection Sharing working through USB?
No, just plug the phone into your pc and start ICS.... It should DHCP an IP for your pc and surf away....
azclown said:
No, just plug the phone into your pc and start ICS.... It should DHCP an IP for your pc and surf away....
Click to expand...
Click to collapse
thats badass. i thought only WMWiFiRouter would work without me being charged. but it did mess up my wifi ability. thaanks
wmwifi
Wmwifirouter is also a great program, but (speaking from several months ago) when I would use it consistently over a period of time at school, or in a hotel, etc, it would overheat.
Using the USB method doesn't do that at all, and also seems to keep things going quick.
works
ok i can confirm that it works nicely. i am using internet sharing via usb and its nice and easy. as long as i dont get charged this will be lovely.
i think the secret cap on unlimited pda usage for verzon is 20 gigs a month. i'll just make sure i dont go over that.
thanks again for your help guys
I don't seem to have ICS on my XV6800. I have some program called Modem Link. Is there a way for me to put ICS on here?
firefurby said:
I don't seem to have ICS on my XV6800. I have some program called Modem Link. Is there a way for me to put ICS on here?
Click to expand...
Click to collapse
You have to have upgraded to a DCD rom.
Dan
also note that ICS, is called "Internet Sharing" on DVD's roms and is in the program menu. not under settings. that confused me too, being a former herald owner, i had a cooked rom where the chef always had it in connection settings.
I use PdaNet and it works just fine for tethering. USB and Bluetooth.
ICS Advice
FYI - ICS works great but you must launch it on your phone first and tell it to connect before tethering it via USB to your computer.
Hope this helps.
VZW internet connection and Mac
Is there a way to use ICS or anything else to share internet (usb/bt/wifi) with a Mac (i've got a macbook) ? i've tried WMWifirouter but haven't gotten any of the versions to work with DCD 3.2.3...
thanks!
So I have tried this every way I can think of and not had any luck. I had it working a long time ago, but am having no luck now. I am using ICS and I have tried the reg edits under wmodem for CheckProfile=0, Multi-NAI=0, WModemDun=0. My phone connects to my laptop and opens a LAN connection and under status says "acquiring network address" for about a minute. It then pops up the yield sign and says "Limited or No Connectivity" On the phone side everything looks good. I get an error that says cannot connect sometimes, but not always. I tried deleting the Extension key under the Internet Sharing registry and still no luck. Anybody have any ideas? Is this a phone thing or a laptop thing. I am on WinXP and it does show in the device manager that a Internet Connection Sharing Device is attached and working. Thanks for any help.
I just got my Touch Pro yesterday. When I ordered it I went ahead and added tethering. With my 6800/Titan/Mogul, I was able to tether via bluetooth no problem with a custom ROM that added "internet sharing".
The only way to tether via bluetooth on the Touch Pro stock ROM is via "Modem Link". I got it working fine on Vista. But my work laptop I commute an hour to work each way, is the MacBook Pro.
I absolutely do not want to use a USB cord as there is not much room when you have someone sitting next to you. So I want to be able to connect, and put the phone back in my pocket.
I've searched hi and low for a solution, but can't find anything useful that actually works.
Any suggestions/step by step walk through on a working solution would be much appreciated!!
Thanks!
go->utilities->bluetooth->add new device->phone....should be self explanatory from there.
nikon858 said:
go->utilities->bluetooth->add new device->phone....should be self explanatory from there.
Click to expand...
Click to collapse
No, this does not work. It only holds the connection for 5 to 15 seconds before it fails. It worked great with my Mogul, but I've looked everywhere and can't get it to work with my TP!
yeah same here. i've gotten it to connect a couple times, but then it's only for a for about 5-10 seconds and then disconnects. I just ordered a bluetooth dongle that works with mac osx just to be sure it's not the internal bluetooth on the mac. I could be wrong, but I think the reason it's not stable as my previous phone is because connecting via "internet sharing" created a PAN vs. DUN. On my MacBook Pro it would say "join network on <phone name>" and it would work perfect. Using "modem link" I think is just using the DUN profile. Maybe JETware will expose PAN profile and more profiles? I want to try it, but it looks like it's old software.
well no luck with the bluetooth dongle ordered for the mac as there is no software to install that came with it. plugged it in and the os x bluetooth used the dongle instead of the built in bluetooth hardware. that was the only difference.
But again, I don't think it has anything to do with the Mac. I believe it's just the lack of the PAN profile on the phone. DUN profile works fine on the PC, but sucks on the MAC. At least with Verizon and/or the Touch Pro.
I think I'll remove the tethering package until a custom ROM comes out that enables the PAN profile. Hopefully someone can unlock GPS too. Other than VZW locking down those 2 things, I think the phone is great!
http://www.wmwifirouter.com/
"WMWifiRouter instantly turns your wifi enabled smartphone* into a wireless internet hotspot. Now you can use your laptop and any other device with wifi to get online and surf, email, instant message, and anything else you normally use the internet for"
Internet Sharing App: http://forum.xda-developers.com/showthread.php?t=321393
WOW! Thank you! http://www.wmwifirouter.com Works great. It took a little time to troubleshoot at first. But it's always those quick simple solutions that getcha. I just had to disable the power saving feature. But definitely a cool program worth shelling out $30 for. I had no idea that bluetooth limits bandwidth so much. Through WiFi I'm getting 2,418 kbps down and 516 kbps up. I think with bluetooth I was only able to get like 200-400 kbps down. I also had no idea pocket pc's were capable of acting like a router.
Thanks again. This seems to be the best solution for tethering VZW Touch Pro with a MacBook Pro.
By the way, I also tried the Interent Sharing app. Although it puts the program on your phone, it doesn't enable the PAN profile on the phone. So I'm guessing Verizon's a little smarter than just letting a simple app unlock it. I'm assuming a custom ROM in the future will unlock the PAN profile. Even if it does become unlocked, sharing through WiFi is so much faster that it's not even worth it going through bluetooth.
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.